TSQL单表或单视图分页存储过程-百万级高效分页

USE [CommonOA]
GO
/****** Object:  StoredProcedure [dbo].[P_viewPage]    Script Date: 07/31/2013 17:08:22 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROC [dbo].[P_viewPage]

    /**//**//**//*
        nzperfect [no_mIss] 高效通用分页存储过程(双向检索) 2007.5.7  QQ:34813284
        敬告：适用于单一主键或存在唯一值列的表或视图
        ps:Sql语句为8000字节,调用时请注意传入参数及sql总长度不要超过指定范围
           
    */

    @TableName VARCHAR(200),     --表名
    @FieldList VARCHAR(2000),    --显示列名，如果是全部字段则为*
    @PrimaryKey VARCHAR(100),    --单一主键或唯一值键
    @Where VARCHAR(2000),        --查询条件 不含'where'字符，如id>10 and len(userid)>9
    @Order VARCHAR(1000),        --排序 不含'order by'字符，如id asc,userid desc，必须指定asc或desc                                 
                                 --注意当@SortType=3时生效，记住一定要在最后加上主键，否则会让你比较郁闷
    @SortType INT,               --排序规则 1:正序asc 2:倒序desc 3:多列排序方法
    @RecorderCount INT,          --记录总数 0:会返回总记录
    @PageSize INT,               --每页输出的记录数
    @PageIndex INT,              --当前页数
    @TotalCount INT OUTPUT,      --记返回总记录
    @TotalPageCount INT OUTPUT   --返回总页数
AS
    SET NOCOUNT ON

    IF ISNULL(@TotalCount,'') = '' SET @TotalCount = 0
    SET @Order = RTRIM(LTRIM(@Order))
    SET @PrimaryKey = RTRIM(LTRIM(@PrimaryKey))
    SET @FieldList = REPLACE(RTRIM(LTRIM(@FieldList)),' ','')

    WHILE CHARINDEX(', ',@Order) > 0 OR CHARINDEX(' ,',@Order) > 0
    BEGIN
        SET @Order = REPLACE(@Order,', ',',')
        SET @Order = REPLACE(@Order,' ,',',')    
    END

    IF ISNULL(@TableName,'') = '' OR ISNULL(@FieldList,'') = ''
        OR ISNULL(@PrimaryKey,'') = ''
        OR @SortType < 1 OR @SortType >3
        OR @RecorderCount  < 0 OR @PageSize < 0 OR @PageIndex < 0        
    BEGIN
        PRINT('ERR_00')       
        RETURN
    END    

    IF @SortType = 3
    BEGIN
        IF (UPPER(RIGHT(@Order,4))!=' ASC' AND UPPER(RIGHT(@Order,5))!=' DESC')
        BEGIN PRINT('ERR_02') RETURN END
    END

    DECLARE @new_where1 VARCHAR(1000)
    DECLARE @new_where2 VARCHAR(1000)
    DECLARE @new_order1 VARCHAR(1000)   
    DECLARE @new_order2 VARCHAR(1000)
    DECLARE @new_order3 VARCHAR(1000)
    DECLARE @Sql VARCHAR(8000)
    DECLARE @SqlCount NVARCHAR(4000)

    IF ISNULL(@where,'') = ''
        BEGIN
            SET @new_where1 = ' '
            SET @new_where2 = ' WHERE  '
        END
    ELSE
        BEGIN
            SET @new_where1 = ' WHERE ' + @where
            SET @new_where2 = ' WHERE ' + @where + ' AND '
        END

    IF ISNULL(@order,'') = '' OR @SortType = 1  OR @SortType = 2
        BEGIN
            IF @SortType = 1
            BEGIN
                SET @new_order1 = ' ORDER BY ' + @PrimaryKey + ' ASC'
                SET @new_order2 = ' ORDER BY ' + @PrimaryKey + ' DESC'
            END
            IF @SortType = 2
            BEGIN
                SET @new_order1 = ' ORDER BY ' + @PrimaryKey + ' DESC'
                SET @new_order2 = ' ORDER BY ' + @PrimaryKey + ' ASC'
            END
        END
    ELSE
        BEGIN
            SET @new_order1 = ' ORDER BY ' + @Order
        END

    IF @SortType = 3 AND  CHARINDEX(','+@PrimaryKey+' ',','+@Order)>0
        BEGIN
            SET @new_order1 = ' ORDER BY ' + @Order
            SET @new_order2 = @Order + ','            
            SET @new_order2 = REPLACE(REPLACE(@new_order2,'ASC,','{ASC},'),'DESC,','{DESC},')            
            SET @new_order2 = REPLACE(REPLACE(@new_order2,'{ASC},','DESC,'),'{DESC},','ASC,')
            SET @new_order2 = ' ORDER BY ' + SUBSTRING(@new_order2,1,LEN(@new_order2)-1)            
            IF @FieldList <> '*'
                BEGIN            
                    SET @new_order3 = REPLACE(REPLACE(@Order + ',','ASC,',','),'DESC,',',')                              
                    SET @FieldList = ',' + @FieldList                    
                    WHILE CHARINDEX(',',@new_order3)>0
                    BEGIN
                        IF CHARINDEX(SUBSTRING(','+@new_order3,1,CHARINDEX(',',@new_order3)),','+@FieldList+',')>0
                        BEGIN
                        SET @FieldList =
                            @FieldList + ',' + SUBSTRING(@new_order3,1,CHARINDEX(',',@new_order3))                        
                        END
                        SET @new_order3 =
                        SUBSTRING(@new_order3,CHARINDEX(',',@new_order3)+1,LEN(@new_order3))
                    END
                    SET @FieldList = SUBSTRING(@FieldList,2,LEN(@FieldList))                     
                END            
        END

    SET @SqlCount = 'SELECT @TotalCount=COUNT(*),@TotalPageCount=CEILING((COUNT(*)+0.0)/'
                    + CAST(@PageSize AS VARCHAR)+') FROM ' + @TableName + @new_where1
    
    IF @RecorderCount  = 0
        BEGIN
             EXEC SP_EXECUTESQL @SqlCount,N'@TotalCount INT OUTPUT,@TotalPageCount INT OUTPUT',
                               @TotalCount OUTPUT,@TotalPageCount OUTPUT
        END
    ELSE
        BEGIN
             SELECT @TotalCount = @RecorderCount            
        END

    IF @PageIndex > CEILING((@TotalCount+0.0)/@PageSize)
        BEGIN
            SET @PageIndex =  CEILING((@TotalCount+0.0)/@PageSize)
        END

    IF @PageIndex = 1 OR @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize)
        BEGIN
            IF @PageIndex = 1 --返回第一页数据
                BEGIN
                    SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
                               + @TableName + @new_where1 + @new_order1
                END
            IF @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize)  --返回最后一页数据
                BEGIN
                    SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
                               + 'SELECT TOP ' + STR(ABS(@PageSize*@PageIndex-@TotalCount-@PageSize))
                               + ' ' + @FieldList + ' FROM '
                               + @TableName + @new_where1 + @new_order2 + ' ) AS TMP '
                               + @new_order1                    
                END        
        END    
    ELSE
        BEGIN
            IF @SortType = 1  --仅主键正序排序
                BEGIN
                    IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2  --正向检索
                        BEGIN
                            SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
                                       + @TableName + @new_where2 + @PrimaryKey + ' > '
                                       + '(SELECT MAX(' + @PrimaryKey + ') FROM (SELECT TOP '
                                       + STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
                                       + ' FROM ' + @TableName
                                       + @new_where1 + @new_order1 +' ) AS TMP) '+ @new_order1
                        END
                    ELSE  --反向检索
                        BEGIN
                            SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
                                       + 'SELECT TOP ' + STR(@PageSize) + ' '
                                       + @FieldList + ' FROM '
                                       + @TableName + @new_where2 + @PrimaryKey + ' < '
                                       + '(SELECT MIN(' + @PrimaryKey + ') FROM (SELECT TOP '
                                       + STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey
                                       + ' FROM ' + @TableName
                                       + @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
                                       + ' ) AS TMP ' + @new_order1
                        END
                END
            IF @SortType = 2  --仅主键反序排序
                BEGIN
                    IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2  --正向检索
                        BEGIN
                            SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
                                       + @TableName + @new_where2 + @PrimaryKey + ' < '
                                       + '(SELECT MIN(' + @PrimaryKey + ') FROM (SELECT TOP '
                                       + STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
                                       +' FROM '+ @TableName
                                       + @new_where1 + @new_order1 + ') AS TMP) '+ @new_order1                               
                        END
                    ELSE  --反向检索
                        BEGIN
                            SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
                                       + 'SELECT TOP ' + STR(@PageSize) + ' '
                                       + @FieldList + ' FROM '
                                       + @TableName + @new_where2 + @PrimaryKey + ' > '
                                       + '(SELECT MAX(' + @PrimaryKey + ') FROM (SELECT TOP '
                                       + STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey
                                       + ' FROM ' + @TableName
                                       + @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
                                       + ' ) AS TMP ' + @new_order1
                        END  
                END                         
            IF @SortType = 3  --多列排序，必须包含主键，且放置最后，否则不处理
                BEGIN
                    IF CHARINDEX(',' + @PrimaryKey + ' ',',' + @Order) = 0
                    BEGIN PRINT('ERR_02') RETURN END
                    IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2  --正向检索
                        BEGIN
                            SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
                                       + 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
                                       + ' SELECT TOP ' + STR(@PageSize*@PageIndex) + ' ' + @FieldList
                                       + ' FROM ' + @TableName + @new_where1 + @new_order1 + ' ) AS TMP '
                                       + @new_order2 + ' ) AS TMP ' + @new_order1    
                        END
                    ELSE  --反向检索
                        BEGIN
                            SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '  
                                       + 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
                                       + ' SELECT TOP ' + STR(@TotalCount-@PageSize*@PageIndex+@PageSize) + ' ' + @FieldList
                                       + ' FROM ' + @TableName + @new_where1 + @new_order2 + ' ) AS TMP '
                                       + @new_order1 + ' ) AS TMP ' + @new_order1
                        END
                END
        END
    PRINT(@Sql)
    EXEC(@Sql)