WSNAT Messages 1200-1299
1200
INFO: .SysClientState: User usrname on LMID state change to state
Description
This message indicates that the client specified above changed to a new state. A complete listing of the current attributes of the client are sent in the posted buffer.
Action
This is an informational message.
See Also
EVENT_MIB(5), TM_MIB(5)
1201
WARN: .SysClientSecurity: User usrname on LMID authentication failure
Description
This message indicates that the client specified above failed security validation when trying to join the application. A complete listing of the current attributes of the client are sent in the posted buffer.
Action
Check to make sure that this is not some hacker trying to gain access to your application data.
See Also
EVENT_MIB(5), TM_MIB(5)
1206
ERROR: Memory allocation failure error_info
Description
An attempt dynamically to allocate memory from the operating system failed while trying to compress a message. Additional information about the problem is printed as part of the message.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1207
ERROR: Expected numeric argument to -c option
Description
A non-numeric argument was passed to the WSL -c option.
Action
Change the configuration of the WSL to have a numeric compression limit.
See Also
WSL(5)
1215
ERROR: Expected numeric argument to -k option
Description
A non-numeric argument was passed to the WSL -k option.
Action
Change the configuration of the WSL to have a numeric compression limit.
See Also
WSL(5)
1216
ERROR: Expected numeric argument to -p option
Description
The -p option to the workstation listener controls the minimum TCP port number which a workstation handler will attempt to listen. This port number must be numeric.
Action
Change the -p option to be numeric.
1217
ERROR: Expected numeric argument to -P option
Description
The -P option to the workstation listener controls the maximum TCP port number which a workstation handler will attempt to listen. This port number must be numeric.
Action
Change the -P option to be numeric.
1218
ERROR: The -p (minport) or -P (maxport) option is out of range
Description
minport must be less than or equal to maxport, and both must be less than or equal to 65535.
Action
Change the -p or -P option to comply with the restrictions.
1219
ERROR: Memory allocation failure
Description
While creating a data structure to keep track of TCP port numbers, the system ran out of memory.
Action
Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1220
ERROR: Exhausted all available ports
Description
The workstation listener has tried all TCP ports within the range specified by the -p and -P options. It could not bind to any of the TCP ports in the range.
Action
If there are more workstation handlers than ports available in the range specified by -p and -P, then a new handler will not be able to bind to any of the TCP ports in the allowable range. Do not forget about the TCP port that is used by the workstation listener as well. Increase the range specified by the -p and -P options.
1221
ERROR: Could not establish listening address address
Description
The workstation listener has tried all TCP ports within the range specified by the -p and -P options. It could not bind to any of the TCP ports in the range. The workstation listener could not bind to the given address.
Action
If there are more workstation handlers than ports available in the range specified by -p and -P, then a new handler will not be able to bind to any of the TCP ports in the allowable range. Do not forget about the TCP port which is used by the workstation listener as well. Increase the range specified by the -p and -P options. Make sure that address is correct.
1222
ERROR: Expected numeric argument to -z option
Description
The -z option to the workstation listener controls the minimum allowable encryption strength. This number must be numeric.
Action
Change the -z option to be numeric.
1223
ERROR: Expected numeric argument to -Z option
Description
The -Z option to the workstation listener controls the maximum allowable encryption strength. This number must be numeric.
Action
Change the -Z option to be numeric.
1224
ERROR: Link Level Encryption add-on package is not installed
Description
The minimum number of encryption bits was greater than zero, but there is no link level encryption add-on package installed on this machine.
Action
Install the link level encryption package or change the minimum encryption bits (the -z option) to be zero.
1229
WARN: A client failed encryption negotiation
Description
A workstation client attempted to log in to the system, but could not negotiate an acceptable encryption level.
Action
When workstation clients log into the system, they negotiate encryption strength with the workstation listener. If the client and listener cannot agree on the level of encryption (for example, if the workstation listener demands 128-bit encryption and the client can only speak 40-bits encryption) then this message will appear. The administrator can either change the encryption policy of the workstation listener or workstation client.
1230
ERROR: Invalid security protocol
Description
An invalid opcode was attempted while the workstation listener was insecure.
Action
Monitor your network for malicious use. Contact BEA Customer Support.
1231
ERROR: Memory allocation error
Description
While negotiating the Diffie-Hellman parameters, the workstation listener ran out of memory.
Action
Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1232
ERROR: Encryption negotiation protocol error
Description
An invalid opcode was attempted while the workstation listener was insecure.
Action
Monitor your network for malicious use. Contact BEA Customer Support.
1233
ERROR: Unable to get encryption handle
Description
While negotiating the Diffie-Hellman parameters, the workstation listener had an error while attempting to get an encryption handle.
Action
Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1234
ERROR: Unable to establish negotiation parameters
Description
An invalid opcode was attempted while the workstation listener was insecure.
Action
Monitor your network for malicious use. Contact BEA Customer Support.
1235
ERROR: Unable to send negotiation parameters
Description
While attempting to send the Diffie-Hellman parameters to the client, an error occurred.
Action
The network may have experienced an error, or the client waiting for the security packet may have been killed. If neither of these events has occurred, contact BEA Customer Support.
1236
ERROR: Unable to begin encryption
Description
After establishing the shared key, an error occurred while starting encryption.
Action
Monitor your network for malicious use. Contact BEA Customer Support.
1237
ERROR: tpnotify(TPACK) failed to reply, tperrno = tperrno
Description
The workstation handler sent an acknowledged unsolicited message to a client. However, that client never sent its acknowledgment.
Action
The network may have experienced an error, or the client waiting for the notification may have been killed. tperrno may provide clues as to the cause of this failure. If neither of these events has occurred, contact BEA Customer Support.
1238
ERROR: Invalid security parameters
Description
The encryption level of the workstation listener is greater than zero bits, but the link level encryption package is not installed on this machine.
Action
The MIB may have changed the minimum encryption bits for this workstation handler. If the new value of the minimum encryption bits is greater than zero and the link level encryption package is not installed, then no clients will be able to log into the workstation handler. Change the minimum encryption value via the -z option to the workstation listener, or through the MIB with theTA_MINENCRYPTBITS member of the T_WSL class.
1239
ERROR: Invalid security parameters
Description
The encryption level of the workstation listener is greater than forty bits, but only the 40-bit link level encryption package is installed on this machine.
Action
The MIB may have changed the minimum encryption bits for this workstation handler. If the new value of the minimum encryption bits is greater than forty, then no clients will be able to log into the workstation handler. Change the minimum encryption value via the -z option to the workstation listener, or through the MIB with the TA_MINENCRYPTBITS member of the T_WSL class.
1240
ERROR: Failed to read server table entry, tperrno = tperrno
Description
The workstation listener was rebooting after a failure and could not read the server table.
Action
The bulletin board may be corrupted. tperrno may provide clues as to the cause of this failure. Contact BEA Customer Support.
1241
ERROR: Sending of reply to tpbroadcast() or tpnotify() call to client failed
Description
The workstation handler received an acknowledgment from a workstation client but was unable to forward the acknowledgment to the sender of the tpnotify.
Action
The originator of the tpnotify may have been killed. If the originator of the notify has not been killed, contact BEA Customer Support.
1242
ERROR: Bad Internet type of listening address provided: address
Description
address is not a valid Internet address.
Action
Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Change address to comply with the known formats. If you believe that your address is in the proper format, contact BEA Customer Support.
1243
ERROR: -H hexadecimal value has to have an even length
Description
If an address starts with 0x, then that address must be an even length of characters.
Action
A hexadecimal character represents a nibble (4 bits). A byte is 8 bits. To fully specify a byte, two characters are needed. Change the address to have an even number of characters.
1244
ERROR: Memory allocation failure
Description
While creating a data structure for an address specified via the -H option, the system ran out of memory.
Action
Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1245
ERROR: Bad hexadecimal number provided for external address: address
Description
The hexadecimal address address from the -H option is in an improper format.
Action
Any address which starts with 0x must be a valid hexadecimal address. Valid hexadecimal characters are 0 - 9, a-f and A-F. Change address to comply with the known formats.
1246
ERROR: Bad Internet type of external address provided: address
Description
The Internet address address from the -H option is in an improper format.
Action
Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Change address to comply with the known formats.
1247
ERROR: Memory allocation failure
Description
While allocating space for the binary representation of the -H option address, the system ran out of memory.
Action
Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1248
ERROR: Memory allocation failure
Description
While allocating space for the binary representation of the -H option address, the system ran out of memory.
Action
Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1249
ERROR: -H and -n have different length of network address
Description
If you are using an external address, then that address must have the same format as the -n option.
Action
Change the -H option to have the same format as the -n option.
1250
ERROR: External address can not be resolved val
Description
The Domain Name Service could not resolve the address given by the -H option.
Action
Make sure that the Domain Name Service knows the server represented by the address given in the -H option. If the name service does not know the server, reconfigure the name service properly. Change the address in the -H option to a name which is well known by the name service.
1251
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used be a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1252
ERROR: Unable to determine license level
Description
While validating the value of the -c argument of the workstation listener, an error occurred while retrieving the current license attributes.
Action
Contact BEA Customer Support.
1253
ERROR: Workstation compression configured, but no license for workstation compression was found
Description
You do not have a license to use workstation compression.
Action
Purchase a license for workstation compression. If you believe that you own and have installed the license for workstation compression, contact BEA Customer Support.
1254
ERROR: Bad conversational sequence number
Description
Conversations are sequenced in order to provide protection. One of the conversational messages arrived out of order. The conversation has been disconnected, and if a transaction was active, it has been set to the ABORTONLY state.
Action
Look at the userlog to determine whether or not the BRIDGE has given up sending any messages to the message queue for the workstation handler. If it has, the operating system may need to be tuned to properly handle a high volume of messages. Using compression may also alleviate this problem. This error may also occur when the BRIDGE is failing over to a new network link or failing back to a high priority link.
1255
WARN: Couldn't change to client context num, continuing
Description
An internal error was encountered while attempting to switch client contexts.
Action
Contact BEA Customer Support.
1256
WARN: .SysClientSecurity: User user on machine authentication failure
Description
This is the system event message which is posted when a user fails authentication.
Action
The action depends on the security policy of the user.
1257
ERROR: Couldn't create buffer for receiving messages
Description
An attempt dynamically to allocate memory from the operating system using malloc failed in the generic handler.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1258
WARN: No client context space available in handler
Description
The maximum number of clients has been used up in the generic handler.
Action
Either increase the total number of clients allowable into the system, or do not attempt to connect to a loaded system.
1259
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system using malloc failed in the generic handler.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1260
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system using malloc failed in the generic handler.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1261
ERROR: tpinit() failed, tperrno = tperrno
Description
A client was unable to enter the system from the generic handler. The tperrno may give clues as to the cause of this failure.
Action
Contact BEA Customer Support.
1262
ERROR: tpchkauth() failed, tperrno = tperrno
Description
tpchkauth failed from the generic handler. The tperrno may give clues as to the cause of this failure.
Action
Contact BEA Customer Support.
1263
WARN: Forced shutdown of client; user name 'name'; client name 'client'
Description
A forced shutdown of the given user name and client name has been performed by the generic handler.
Action
None.
1264
WARN: .SysClientDied: User user on machine client died
Description
This is the event posted when a forced shutdown of the given user name on machine has been performed by the generic handler.
Action
None.
1265
ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
Description
An operating system error occurred in the generic handler while reading a message queue.
Action
Ensure the sanity of the system. Contact BEA Customer Support.
1266
ERROR: Received message of type 'type' to tpinit() call
Description
The only message type which tpinit takes is TPINIT. The generic handler found a type of type was given to tpinit.
Action
Ensure all clients of the generic handler provide the proper buffer type during tpinit.
1267
ERROR: TPINIT information must be passed to tpinit() call in secure application
Description
Secure applications must provide the TPINIT buffer to tpinit. A client of the generic handler in a secure application did not provide the TPINIT buffer.
Action
Ensure all clients of the generic handler provide a TPINIT buffer during tpinit in a secure application.
1268
ERROR: Invalid client name given 'client'.
Description
The given client is invalid in the application.
Action
Ensure that the TPINIT buffer passed to tpinit does not have the invalid client name.
1269
ERROR: Invalid length for TPINIT structure given
Description
An invalid TPINIT buffer has been processed by the generic handler.
Action
There may be a negative length in the TPINIT datalen field. Ensure no client passes a TPINIT buffer with a negative datalen field to the generic handler.
1270
ERROR: Failed to update registry table information
Description
The generic handler was not able to update the BEA TUXEDO system registry information.
Action
Contact BEA Customer Support.
1271
ERROR: Failed to send message to authentication server, tperrno = tperrno
Description
The generic handler was not able to send the TPINIT buffer to the server offering AUTHSVC.
Action
Ensure that the authentication server is up and running, and that the AUTHSVC is currently advertised. Contact BEA Customer Support.
1272
WARN: Invalid notification option given, reset to TPU_IGN.
Description
The generic handler does not handle the notification option from the client.
Action
Ensure that all clients change the notification options to one which the generic handler is able to accept.
1273
INFO: .SysClientState: User user on machine state change to state
Description
This event is posted by the generic handler whenever the user on machine changes state. The new state is given in state.
Action
None.
1274
INFO: Abortively disconnecting workstation client user[user], client[client]
Description
The generic handler is disconnecting a client which is believed to be dead.
Action
None.
1275
INFO: Userid: [userid], Clientid: [clientid] timed out due to inactivity
Description
The generic handler timed out the given userid and clientid.
Action
None.
1276
ERROR: Received message with unknown release number value
Description
The WSH received a packet with an unknown release number value. The network may be having difficulty. If link level encryption is in use, this error may be an indication that an attack is in progress.
Action
If this error happens consistently, then contact BEA Customer Support.
1277
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system using malloc failed while initializing the WSL or WSH.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1278
ERROR: Address conversion error
Description
The WSH had a problem converting an address from a binary format to a text format.
Action
If this error happens consistently, then contact BEA Customer Support.
1279
ERROR: descriptor allocation error
Description
The WSH was unable to allocate a network resource for the listening endpoint.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1280
ERROR: Could not initialize network (error)
Description
The WSH or WSL could not initialize its network.
Action
Ensure that the network is viable on the machine. If the network is viable, contact BEA Customer Support.
1281
ERROR: Could not initialize global information (error)
Description
The WSH or WSL could not initialize its network.
Action
Ensure that the network is viable on the machine. If the network is viable, contact BEA Customer Support.
1282
ERROR: Failed to initialize network protocol information (error)
Description
The WSH or WSL could not initialize its network.
Action
Ensure that the network is viable on the machine. If the network is viable, contact BEA Customer Support.
1283
ERROR: Network error (error) servicing network event
Description
The WSL encountered a severe error while handling network events.
Action
Ensure that the network is viable on the machine. If the network is viable, contact BEA Customer Support.
1284
WARN: Failed to allocate a network resource (error)
Description
The WSH or WSL could not allocate a network descriptor for a remote connection.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1285
ERROR: Expected numeric argument to -N option
Description
The -N option to the WSL requires a numeric argument greater than or equal to zero.
Action
Modify the -N option of the WSL to have a numeric argument in the proper range.
1286
ERROR: -K argument must be client, handler, both, or none
Description
The -K option for the WSL requires an argument of client, handler, both or none.
Action
Ensure that the -K option of the WSL is client, handler, both or none. Check your spelling.
1287
WARN: Forced shutdown of client; user name 'name'; client name 'name'; workstation address 'xxx.xxx.xxx.xxx'
Description
This may result from shutting down a WSH when clients are connected, a client connection has timed out, the WSH was unable to send a network message to the client or an incorrect APP_PW(application password) was rejected during tpinit.
Action
If APP_PW is turned on (refer to your ubbconfig file and ubbconfig(5)), then check with your system administrator to verify that you are using the correct application password for your TUXEDO application.
1288
WARN: setsockopt() for SO_KEEPALIVE failed
Description
The KEEPALIVE handler-side networking option was configured for a WSL/WSH pair, but could not be enabled.
Action
This error is ignored and WSH processing continues normally. However, network errors may not be reported, or may be reported less promptly. Consider enabling the inactive client timeout (WSL -Toption) to reclaim resources associated with dead network connections.
See Also
WSL(5)
1289
WARN: KEEPALIVE option requested but not available on this platform
Description
The KEEPALIVE handler-side networking option was configured for a WSL/WSH pair, but could not be enabled because it is not available on this platform.
Action
This error is ignored and WSH processing continues normally. However network errors may not be reported, or may be reported less promptly. Consider enabling the inactive client timeout (WSL -Toption) to reclaim resources associated with dead network connections.
See Also
WSL(5)
1290
ERROR: Can't parse the address address
Description
While attempting to resolve address, an error occurred.
Action
Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the host name and port number portion of address can be located by your server.
1291
ERROR: Can't resolve host name in address address
Description
While attempting to resolve the host name portion of address, an error occurred.
Action
Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the host name portion of address can be located by your DNS server.
1292
ERROR: Unknown address type: address
Description
The given address does not correspond to a type known by the system.
Action
The BEA TUXEDO System understands several types of address format. Addresses which start with // must be Internet addresses. Addresses which start with 0x are hexadecimal representations of the address. Other formats may or may not be understood by the BEA TUXEDO system.
1293
ERROR: Can't resolve port number in address address
Description
While attempting to resolve the port number portion of address, an error occurred.
Action
Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the port number portion of address can be located by your server.
1294
ERROR: Can't convert the address address to binary format
Description
An error occurred while converting address to an internal binary representation.
Action
Contact BEA Customer Support.
1295
ERROR: Illegal character in the address address
Description
There is an illegal character in the port portion of address. Ports may only have alphanumeric characters.
Action
Remove the illegal character from the port portion of the address.
1296
ERROR: Missing port number in the address address
Description
address must have a port number portion.
Action
Supply a port number portion in the given address. Otherwise, the WSL or WSH cannot determine its listening endpoint properly.
1297
ERROR: Port number cant be bigger than value in the address address
Description
The port number portion of address is larger than the largest allowable port number of value.
Action
Change the port number to be within the specified range.
1298
ERROR: TUXDIR environment variable not set
Description
The environment variable TUXDIR must be set when buildwsh is run.
Action
Set the environment variable TUXDIR before running buildwsh.
See Also
buildwsh
扫一扫
495
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
