MPlayer移植到arm开发板

版权声明:本文为博主原创文章,未经博主允许不得转载。 https://blog.csdn.net/w_b_h/article/details/80697334

今天用了一天的时间将mplayer移植到arm开发板上,移植过程中遇到各种问题,在此做以记录。

mplayer版本:1.0rc2

Ubuntu版本:12.04 64位

移植过程:

1、su获取root权限;

2、解压mplayer;

3、在解压的目录中mkdir output,作为安装目录;

3、./configure配置。具体如下:

./configure --enable-cross-compile \
            --host-cc=gcc \
            --cc=/root/external-toolchain/bin/arm-linux-gnueabi-gcc \
            --as=/root/external-toolchain/bin/arm-linux-gnueabi-as \
            --ar=/root/external-toolchain/bin/arm-linux-gnueabi-ar \
            --ranlib=/root/external-toolchain/bin/arm-linux-gnueabi-ranlib \
            --target=arm-linux \
            --prefix=/root/mplayer/MPlayer-1.0rc2/output \
            --enable-alsa \
            --enable-static \
            --disable-win32dll \
            --disable-dvdread \
            --enable-fbdev \
            --disable-mencoder \
            --disable-live \
            --disable-ivtv \
            --language=zh_CH

4、修改config.mak文件。在这个文件中的OPTFLAGS选项中加入“-Wa,-mimplicit-it=thumb”

5、make

6、修改config.mak文件:把这个文件中的“INSTALLSTRIP = -s”  改成“INSTALLSTRIP =”

7、make install


移植过程中遇到的问题:

1、make时提示:

../libavutil/bswap.h: Assembler messages:
../libavutil/bswap.h:77: Error: no such instruction: `eor %eax,%esi,%esi,ror'
../libavutil/bswap.h:78: Error: no such instruction: `bic %eax,%eax,'
../libavutil/bswap.h:79: Error: number of operands mismatch for `mov'
../libavutil/bswap.h:80: Error: no such instruction: `eor %esi,%esi,%eax,lsr'
make[1]: *** [vd_sgi.o] Error 1

这个问题是由于编译前没有配置好交叉编译工具链引起的。由于编译前没有配置交叉编译工具链,出现了这个错误。解决办法就是配置好交叉编译工具链。

2、make时提示:

{standard input}: Assembler messages:
{standard input}:61: Error: thumb conditional instruction should be in IT block -- `addgt r2,sl,#0'
{standard input}:62: Error: thumb conditional instruction should be in IT block -- `rsblt r2,sl,#0'
{standard input}:63: Error: thumb conditional instruction should be in IT block -- `smlatbne r2,r4,fp,r2'
{standard input}:65: Error: thumb conditional instruction should be in IT block -- `addgt r0,sl,#0'
{standard input}:66: Error: thumb conditional instruction should be in IT block -- `rsblt r0,sl,#0'
{standard input}:67: Error: thumb conditional instruction should be in IT block -- `smlatbne r0,r5,fp,r0'
{standard input}:69: Error: thumb conditional instruction should be in IT block -- `addgt r3,sl,#0'
{standard input}:70: Error: thumb conditional instruction should be in IT block -- `rsblt r3,sl,#0'
{standard input}:71: Error: thumb conditional instruction should be in IT block -- `smlabbne r4,r4,fp,r3'
{standard input}:73: Error: thumb conditional instruction should be in IT block -- `addgt r3,sl,#0'
{standard input}:74: Error: thumb conditional instruction should be in IT block -- `rsblt r3,sl,#0'
{standard input}:75: Error: thumb conditional instruction should be in IT block -- `smlabbne r5,r5,fp,r3'
{standard input}:81: Error: thumb conditional instruction should be in IT block -- `addgt r2,sl,#0'
{standard input}:82: Error: thumb conditional instruction should be in IT block -- `rsblt r2,sl,#0'
{standard input}:83: Error: thumb conditional instruction should be in IT block -- `smlatbne r2,r6,fp,r2'
{standard input}:85: Error: thumb conditional instruction should be in IT block -- `addgt r0,sl,#0'
{standard input}:86: Error: thumb conditional instruction should be in IT block -- `rsblt r0,sl,#0'
{standard input}:87: Error: thumb conditional instruction should be in IT block -- `smlatbne r0,r7,fp,r0'
{standard input}:89: Error: thumb conditional instruction should be in IT block -- `addgt r3,sl,#0'
{standard input}:90: Error: thumb conditional instruction should be in IT block -- `rsblt r3,sl,#0'
{standard input}:91: Error: thumb conditional instruction should be in IT block -- `smlabbne r6,r6,fp,r3'
{standard input}:93: Error: thumb conditional instruction should be in IT block -- `addgt r3,sl,#0'
{standard input}:94: Error: thumb conditional instruction should be in IT block -- `rsblt r3,sl,#0'
{standard input}:95: Error: thumb conditional instruction should be in IT block -- `smlabbne r7,r7,fp,r3'

这个问题的解决方法是,在make之前修改config.mak文件,在这个文件中的OPTFLAGS中添加“-Wa,-mimplicit-it=thumb”即可。

3、make install时会提示错误:

install -m 755 -s mplayer /root/mplayer/MPlayer-1.0rc2/output/bin
strip: Unable to recognise the format of the input file `/root/mplayer/MPlayer-1.0rc2/output/bin/mplayer'
install: strip process terminated abnormally
make: *** [install-mplayer] Error 1
这个是因为在make install时会调用strip来剔除一些无用的文件,但是此时strip是主机的,而不是目标机的,就出现错误。解决方法是修改config.mak文件,将文件中的“INSTALLSTRIP = -s”  改成“INSTALLSTRIP =”。
阅读更多
想对作者说点什么?

博主推荐

换一批

没有更多推荐了,返回首页