HDU 2612 Find a way

题意：Y和M两个人要在KCF约约约，找一个家离两个人都比较近的KFC，输出两个人所用的时间之和（每格11分钟）。输入2个整数代表输入地图的行列数。接下来输入地图。Y、M分别代表Y、M的起始位置。'.'是路，'#'是墙，'@'表示KFC的位置。

其实我们要做的就是对两个人分别进行两次BFS，记录步数，最后输出的时候再x11就ok啦。因为会有多个KFC，所以定了两个二维数组dis1、dis2，分别代表Y和M到达地图的某个位置上时的步数。需要注意的是除了'#'的位置不能走，其它的位置都是可以通过的，也就是说KFC也可以当成路来走，判断某点是否可行的时候需要注意~

Find a way

Time Limit: 3000/1000 MS (Java/Others)    Memory Limit: 32768/32768 K (Java/Others)
Total Submission(s): 6254    Accepted Submission(s): 2084

Problem Description

Pass a year learning in Hangzhou, yifenfei arrival hometown Ningbo at finally. Leave Ningbo one year, yifenfei have many people to meet. Especially a good friend Merceki.
Yifenfei’s home is at the countryside, but Merceki’s home is in the center of city. So yifenfei made arrangements with Merceki to meet at a KFC. There are many KFC in Ningbo, they want to choose one that let the total time to it be most smallest. 
Now give you a Ningbo map, Both yifenfei and Merceki can move up, down ,left, right to the adjacent road by cost 11 minutes.

 

Input

The input contains multiple test cases.
Each test case include, first two integers n, m. (2<=n,m<=200). 
Next n lines, each line included m character.
‘Y’ express yifenfei initial position.
‘M’    express Merceki initial position.
‘#’ forbid road;
‘.’ Road.
‘@’ KCF

 

Output

For each test case output the minimum total time that both yifenfei and Merceki to arrival one of KFC.You may sure there is always have a KFC that can let them meet.

 

Sample Input

  
  

   
   4 4
Y.#@
....
.#..
@..M
4 4
Y.#@
....
.#..
@#.M
5 5
Y..@.
.#...
.#...
@..M.
#...#
  
  

 

Sample Output

  
  

   
   66
88
66
  
  

题目链接：HDU_2612 Find a way

下面附上AC代码：

#include <iostream>
#include <queue>
#include <cstring>
#include <cstdio>
using namespace std;
#define N 205
int n,m,dis1[N][N],dis2[N][N],vis[N][N];  //dis1、dis2分别记录Y、M到达某点的步数
int to[4][2]={{1,0},{-1,0},{0,1},{0,-1}};
char maze[N][N];

struct node{
    int x;
    int y;
};

int judge(int x,int y)
{
    if(x>=0 &&x<n && y>=0 && y<m && maze[x][y]!='#' && vis[x][y]==0) //判断某点是否可行
        return 1;
    else
        return 0;
}

void bfs(int flag,int x,int y)
{
    int f=0,r=0,t1,t2;
    node cur,temp;
    queue<node>Q;
    cur.x=x;
    cur.y=y;
    Q.push(cur);
    if(flag==1)   //flag1对应Y的BFS
    {
        while(!Q.empty())
        {
          cur=Q.front();
          Q.pop();
          for(int i=0;i<4;i++)
          {
              t1=cur.x+to[i][0];
              t2=cur.y+to[i][1];
              if(judge(t1,t2))
              {
                 vis[t1][t2]=-1;
                 temp.x=t1;
                 temp.y=t2;
                 Q.push(temp);
                 dis1[t1][t2]=dis1[cur.x][cur.y]+1;
              }
          }
        }
    }
    else   //flag2对应M的BFS，区别在于dis1、dis2上。定成3维数组把两个合到一起也可以
    {
        while(!Q.empty())
        {
          cur=Q.front();
          Q.pop();
          for(int i=0;i<4;i++)
          {
              t1=cur.x+to[i][0];t2=cur.y+to[i][1];
              if(judge(t1,t2))
              {
                 vis[t1][t2]=-1;
                 temp.x=t1;
                 temp.y=t2;
                 Q.push(temp);
                 dis2[t1][t2]=dis2[cur.x][cur.y]+1;
              }
          }
        }
    }
}

int main()
{
    int i,j,x1,y1,x2,y2,a[40005][2],num,flag,minn;
    while(scanf("%d%d",&n,&m)!=EOF)
    {
        getchar();
        num=0;minn=100000000;
        for(i=0;i<n;i++)
            scanf("%s",maze[i]);
        for(i=0;i<n;i++)
        {
            for(j=0;j<m;j++)
            {
                dis1[i][j]=0;  //初始化
                dis2[i][j]=0;
                vis[i][j]=0;
                if(maze[i][j]=='Y') //x1y1记录Y位置
                {
                  x1=i;
                  y1=j;
                }
                else if(maze[i][j]=='M')  //x2y2记录M位置
                {
                  x2=i;
                  y2=j;
                }
                else if(maze[i][j]=='@') //a数组记录KCF位置
                {
                  a[num][0]=i;
                  a[num][1]=j;
                  num++;
                }
            }
        }
        /*对Y和M进行BFS*/
        flag=1;
        vis[x1][y1]=-1;
        bfs(flag,x1,y1);
        memset(vis,0,sizeof(vis)); //对Y进行BFS后，把vis复原
        flag=2;
        vis[x2][y2]=-1;
        bfs(flag,x2,y2);

        for(i=0;i<num;i++)
        {
            if(dis1[a[i][0]][a[i][1]]!=0&&dis2[a[i][0]][a[i][1]]!=0) //如果KCF所在位置步数不为0，即两人都能到达该位置
            {
                if(minn>(dis1[a[i][0]][a[i][1]]+dis2[a[i][0]][a[i][1]]))
                   minn=dis1[a[i][0]][a[i][1]]+dis2[a[i][0]][a[i][1]];
            }
        }
        printf("%d\n",minn*11);
    }
    return 0;
}