参考 http://www.itpub.net/viewthread.php?tid=845777&extra=&page=1
Analyze Statement
The ANALYZE statement can be used to gather statistics for a specific table, index or cluster. The statistics can be computed exactly, or estimated based on a specific number of rows, or a percentage of rows:
ANALYZE TABLE employees COMPUTE STATISTICS;
ANALYZE INDEX employees_pk COMPUTE STATISTICS;
ANALYZE TABLE employees ESTIMATE STATISTICS SAMPLE 100 ROWS;
ANALYZE TABLE employees ESTIMATE STATISTICS SAMPLE 15 PERCENT;
DBMS_UTILITY
The DBMS_UTILITY package can be used to gather statistics for a whole schema or database. Both methods follow the same format as the analyze statement:
EXEC DBMS_UTILITY.analyze_schema('SCOTT','COMPUTE');
EXEC DBMS_UTILITY.analyze_schema('SCOTT','ESTIMATE', estimate_rows => 100);
EXEC DBMS_UTILITY.analyze_schema('SCOTT','ESTIMATE', estimate_percent => 15);
EXEC DBMS_UTILITY.analyze_database('COMPUTE');
EXEC DBMS_UTILITY.analyze_database('ESTIMATE', estimate_rows => 100);
EXEC DBMS_UTILITY.analyze_database('ESTIMATE', estimate_percent => 15);
DBMS_STATS
The DBMS_STATS package was introduced in Oracle 8i and is Oracles preferred method of gathering object statistics. Oracle list a number of benefits to using it including parallel execution, long term storage of statistics and transfer of statistics between servers. Once again, it follows a similar format to the other methods:
EXEC DBMS_STATS.gather_database_stats;
EXEC DBMS_STATS.gather_database_stats(estimate_percent => 15);
EXEC DBMS_STATS.gather_schema_stats('SCOTT');
EXEC DBMS_STATS.gather_schema_stats('SCOTT', estimate_percent => 15);
EXEC DBMS_STATS.gather_table_stats('SCOTT', 'EMPLOYEES');
EXEC DBMS_STATS.gather_table_stats('SCOTT', 'EMPLOYEES', estimate_percent => 15);
EXEC DBMS_STATS.gather_index_stats('SCOTT', 'EMPLOYEES_PK');
EXEC DBMS_STATS.gather_index_stats('SCOTT', 'EMPLOYEES_PK', estimate_percent => 15);
This package also gives you the ability to delete statistics:
EXEC DBMS_STATS.delete_database_stats;
EXEC DBMS_STATS.delete_schema_stats('SCOTT');
EXEC DBMS_STATS.delete_table_stats('SCOTT', 'EMPLOYEES');
EXEC DBMS_STATS.delete_index_stats('SCOTT', 'EMPLOYEES_PK');
--------------------------------------------------------------------------------------
自从Oracle8.1.5引入dbms_stats包,Experts们便推荐使用dbms_stats取代analyze。 理由如下
dbms_stats可以并行分析
dbms_stats有自动分析的功能(alter table monitor )
analyze 分析统计信息的不准确some times
1,2好理解,且第2点实际上在VLDB中是最吸引人的;3以前比较模糊,看了metalink236935.1 解释,analyze在分析Partition表的时候,有时候会计算出不准确的Global statistics .
原因是,dbms_stats会实在的去分析表全局统计信息(当指定参数);而analyze是将表分区(局部)的statistics 汇总计算成表全局statistics ,可能导致误差。
如果想分析整个用户或数据库,还可以采用工具包,可以并行分析
Dbms_utility(8i以前的工具包)
Dbms_stats(8i以后提供的工具包)
如
dbms_stats.gather_schema_stats(User,estimate_percent=>100,cascade=> TRUE);
dbms_stats.gather_table_stats(User,TableName,degree => 4,cascade => true);
这是对命令与工具包的一些总结
1、对于分区表,建议使用DBMS_STATS,而不是使用Analyze语句。
a) 可以并行进行,对多个用户,多个Table
b) 可以得到整个分区表的数据和单个分区的数据。
c) 可以在不同级别上Compute Statistics:单个分区,子分区,全表,所有分区
d) 可以倒出统计信息
e) 可以用户自动收集统计信息
2、DBMS_STATS的缺点
a) 不能Validate Structure
b) 不能收集CHAINED ROWS, 不能收集CLUSTER TABLE的信息,这两个仍旧需要使用Analyze语句。
c) DBMS_STATS 默认不对索引进行Analyze,因为默认Cascade是False,需要手工指定为True
3、对于oracle 9里面的External Table,Analyze不能使用,只能使用DBMS_STATS来收集信息。
-----------------------------------------------------------------
10G的文档是这么说的:
Do not use the COMPUTE and ESTIMATE clauses of ANALYZE to collect optimizer statistics. These clauses are supported for backward compatibility. Instead, use the DBMS_STATS package, which lets you collect statistics in parallel, collect global statistics for partitioned objects, and fine tune your statistics collection in other ways. The cost-based optimizer, which depends upon statistics, will eventually use only statistics that have been collected by DBMS_STATS
analyze的功能已经明确:
Use the ANALYZE statement (rather than DBMS_STATS) forstatistics collection not related to the cost-based optimizer:
To use the VALIDATE or LIST CHAINED ROWS clauses
To collect information on freelist blocks
在收集与CBO优化器不相关的统计信息的时候ANALYZE语句要优于DBMS_STATS包
-----------------------------------
EX:
begin
for owner in (select username from dba_users where username not in ('SYS','SYSTEM'))
loop
dbms_output.disable;
dbms_output.enable(1000000);
dbms_output.put_line('Schema: '||owner.username);
select sysdate into start_time from dual;
dbms_output.put_line('Analyze start from : '||start_time);
dbms_stats.gather_schema_stats(ownname => owner.username, estimate_percent => 20, block_sample=> true, cascade=>true);
select sysdate into end_time from dual;
dbms_output.put_line('Analyze complete at : '||end_time);
dbms_output.put_line('---------------------------');
end loop;
dbms_stats.gather_table_stats(ownname =>,
tabname =>,
partname =>,
estimate_percent =>,
block_sample =>,
method_opt =>,
degree =>,parallel degree(并行收集维度) 看CPU个数
granularity =>,
cascade =>,true is also gather columns and index’s statistics;
no_invalidate =>);
///
当索引整个块成为空块的时候,会被放置于freelist上,可以被重用。但是重用前结构上还是临时放置于B-Tree中。
这时analyze & dbms_stats在分析时会有不同,analyze会将这些空的block计算为leaf block,而dbms_stats不将其计算在内。
请看例子
1 create table test
2 as
3 select rownum x
4* from dba_objects
SQL> /
Table created.
SQL> select count(*) from test;
COUNT(*)
———-
6114
1 create index test_idx on test(x)
2* pctfree 95
SQL> /
Index created.
SQL> analyze table test compute statistics;
Table analyzed.
SQL> select index_name,blevel,leaf_blocks,distinct_keys,num_rows,last_analyzed from dba_indexes where index_name=’TEST_IDX’ and owner=’SYS’;
INDEX_NAME BLEVEL LEAF_BLOCKS DISTINCT_KEYS NUM_ROWS LAST_ANALYZED
—————————— ———- ———– ————- ———- —————–
TEST_IDX 1 408 6114 6114 20060513 01:00:25
SQL> delete from test where x<3000;
2999 rows deleted.
SQL> commit;
Commit complete.
SQL> analyze index test_idx compute statistics;
Index analyzed.
SQL> select index_name,blevel,leaf_blocks,distinct_keys,num_rows,last_analyzed
2 from dba_indexes where index_name=’TEST_IDX’ and owner=’SYS’;
INDEX_NAME BLEVEL LEAF_BLOCKS DISTINCT_KEYS NUM_ROWS LAST_ANALYZED
—————————— ———- ———– ————- ———- —————–
TEST_IDX 1 408 3115 3115 20060513 01:03:31
SQL> exec DBMS_STATS.GATHER_INDEX_STATS(’SYS’,'TEST_IDX’);
PL/SQL procedure successfully completed.
SQL> select index_name,blevel,leaf_blocks,distinct_keys,num_rows,last_analyzed
2 from dba_indexes where index_name=’TEST_IDX’ and owner=’SYS’;
INDEX_NAME BLEVEL LEAF_BLOCKS DISTINCT_KEYS NUM_ROWS LAST_ANALYZED
—————————— ———- ———– ————- ———- —————–
TEST_IDX 1 209 3115 3115 20060513 01:04:28
FROM:http://www.dbafan.com/blog/?p=21
我们知道从oracle8i开始﹐analyze语句和dbms_stats包都可以收集相关对象(Tables﹑Indexes﹑Clusters and Materialized Views)的statistics。那哪些statistics的收集应该使用analyze语句﹐哪些statistics的收集应该使用dbms_stats包呢﹖
对于使用哪个去收集statistics﹐应该把一个原则﹐凡是与cost-based optimizer相关的statistics﹐都应通过dbms_stats包收集。与cost-based optimizer无关的statistics(如empty blocks﹐average space等)都应通过analyze语句去收集。
之所以要用dbms_stats包去替代analyze收集优化器statistics﹐是因为dbms_stats包能收集并行statistics和分区对象的全局statistics。
当然analyze语句在其它方面的statistics收集﹐是dbms_stats所无法取代的﹐如﹕
1. 收集在freelist上的blocks信息
2. 检验存储格式的合法性
analyze table bk_test_t validate structure cascade online;
3. 识别表或cluster的行迁移与行链接
为了能使用analyze….list chained rows语句识别行迁移与行链接﹐必须先在执行analyze语句所在的schema内执行$ORACLE_HOME/rdbms/admin/utlchain.sql(或utlchn1.sql)脚本建立chained_rows表。在chained_rows建立之后﹐就可以执行下面的语句﹕
analyze table bk_test list chained rows into chained_rows;