关于轮廓的各种使用

于 2013-08-21 17:24:33 发布
阅读量575 收藏
点赞数 
#include "cv.h" 
#include "highgui.h" 
#include "cvaux.h"
#include "cxcore.h"
#include <stdio.h>
#include <vector>
using namespace std;
using namespace cv;

#define PI 3.14159f
void DrawBox(CvBox2D box,IplImage* img)
{
	CvPoint2D32f points[4]; 
	cvBoxPoints(box,points);

	CvPoint pt[4]; 
	for (int i=0; i<4; i++) 
	{ 
		pt[i].x = (int)points[i].x; 
		pt[i].y = (int)points[i].y; 
	} 
	cvLine( img, pt[0], pt[1],CV_RGB(255,0,0), 2, 8, 0 ); 
	cvLine( img, pt[1], pt[2],CV_RGB(255,0,0), 2, 8, 0 ); 
	cvLine( img, pt[2], pt[3],CV_RGB(255,0,0), 2, 8, 0 ); 
	cvLine( img, pt[3], pt[0],CV_RGB(255,0,0), 2, 8, 0 ); 
}

void main()
{
	IplImage* img1 = cvLoadImage("5.jpg",1);
	IplImage* img1_gray =cvCreateImage(cvGetSize(img1),8,1);
	cvCvtColor(img1,img1_gray,CV_BGR2GRAY);
	IplImage* img_edge1 = cvCreateImage(cvGetSize(img1),8,1);
	cvThreshold(img1_gray,img_edge1,240,255,CV_THRESH_BINARY);

	printf("图1：\n\n");
	CvMemStorage* storage1 = cvCreateMemStorage();
	CvSeq* contour1 = NULL;
	int Nc1= cvFindContours(img_edge1,storage1,&contour1,sizeof(CvContour),CV_RETR_LIST);//最后一个参数的可变性
	printf("轮廓数：%d\n",Nc1);
	
	//轮廓的矩 
	CvMoments *moments1=new CvMoments(); 
	cvMoments(contour1,moments1,0);
	//Hu矩
	CvHuMoments *huMonents1=new CvHuMoments();
	cvGetHuMoments(moments1,huMonents1);
	printf("遍历三阶矩：\n");
	for (int xOrder = 0; xOrder <= 3; xOrder++)
		for (int yOrder = 0; yOrder <= 3; yOrder++)
		{
			if (xOrder + yOrder <= 3)
			{
				double spatialMoment =cvGetSpatialMoment(moments1,xOrder, yOrder);
				double centralMoment =cvGetCentralMoment(moments1,xOrder, yOrder);
				double normalizedCentralMoment =cvGetNormalizedCentralMoment(moments1,xOrder, yOrder);
				printf("  %d,%d ： 空间距-%.2f, 中心距-%.2f, 归一化中心距-%.2f\n",xOrder,yOrder,spatialMoment,centralMoment,normalizedCentralMoment);
			}
		}
	printf("Hu矩：%f,%f,%f,%f,%f,%f,%f\n",huMonents1->hu1,huMonents1->hu2,huMonents1->hu3,huMonents1->hu3,huMonents1->hu5,huMonents1->hu6,huMonents1->hu7);

	printf("\n图2：\n\n");
	IplImage* img2 = cvLoadImage("6.jpg",1);
	IplImage* img2_gray =cvCreateImage(cvGetSize(img2),8,1);
	cvCvtColor(img2,img2_gray,CV_BGR2GRAY);
	IplImage* img_edge2 = cvCreateImage(cvGetSize(img2),8,1);
	cvThreshold(img2_gray,img_edge2,128,255,CV_THRESH_BINARY);

	CvMemStorage* storage2 = cvCreateMemStorage();
	CvSeq* contour2 = NULL;
	int Nc2 = cvFindContours(img_edge2,storage2,&contour2,sizeof(CvContour),CV_RETR_LIST);
	printf("轮廓数：%d\n\n",Nc2);

	printf("遍历三阶矩：\n");
	CvMoments*moments2=new CvMoments();	
	cvMoments(contour2,moments2,0);	
	CvHuMoments	*huMonents2=new CvHuMoments();
	cvGetHuMoments(moments2,huMonents2);
	for (int xOrder = 0; xOrder <= 3; xOrder++)
		for (int yOrder = 0; yOrder <= 3; yOrder++)
		{
			if (xOrder + yOrder <= 3)
			{
				double spatialMoment =cvGetSpatialMoment(moments2,xOrder, yOrder);
				double centralMoment =cvGetCentralMoment(moments2,xOrder, yOrder);
				double normalizedCentralMoment =cvGetNormalizedCentralMoment(moments2,xOrder, yOrder);
				printf("  %d,%d ： 空间距-%.2f, 中心距-%.2f, 归一化中心距-%.2f\n",xOrder,yOrder,spatialMoment,centralMoment,normalizedCentralMoment);
			}
		}
	printf("Hu矩：%f,%f,%f,%f,%f,%f,%f\n",huMonents2->hu1,huMonents2->hu2,huMonents2->hu3,huMonents2->hu3,huMonents2->hu5,huMonents2->hu6,huMonents2->hu7);

	//Hu矩匹配
	double hu = cvMatchShapes(contour1,contour2,CV_CONTOURS_MATCH_I1,0);
	printf("\n\nHu矩匹配：%f\n",hu);

	//轮廓树匹配
	CvMemStorage* storage3 = cvCreateMemStorage();
	CvMemStorage* storage4= cvCreateMemStorage();
	CvContourTree* tree1 = cvCreateContourTree(contour1,storage3,200);
	CvContourTree* tree2 = cvCreateContourTree(contour2,storage4,200);
	double tree = cvMatchContourTrees(tree1,tree2,CV_CONTOURS_MATCH_I1,200);
	printf("\n轮廓树匹配：%.4f\n\n",tree);

	//将轮廓线画出
	double s1,len1,h1,d1;
	CvRect rect1;
	CvBox2D box1,ellipse1;
	CvPoint2D32f center1;
	float radius1;
	IplImage* mask1=cvCreateImage(cvGetSize(img1),8,1);
	IplImage* dst1=cvCreateImage(cvGetSize(img1),8,3);

	//轮廓的成对几何直方图匹配		
	int sizes[2] = {60, 200};
	float ranges[2][2] = {{0,PI}, {0,200}};
	float** rangesPtr = new float* [2];
	rangesPtr[0] = ranges[0];
	rangesPtr[1] = ranges[1];

	CvHistogram* hist1,*hist2;
	hist1 = cvCreateHist(2, sizes, CV_HIST_ARRAY, rangesPtr, 1);
	hist2 = cvCreateHist(2, sizes, CV_HIST_ARRAY, rangesPtr, 1);
	cvCalcPGH(contour1, hist1);	
	cvCalcPGH(contour2, hist2);
	cvNormalizeHist(hist1, 1);
	cvNormalizeHist(hist2, 1);

	double hist= cvCompareHist(hist1,hist2, CV_COMP_INTERSECT);
	printf("\n成对几何直方图匹配:%.2f\n\n\n", hist);

	printf("图1：\n\n");
	for( int i=1; contour1!= 0; contour1 = contour1->h_next,i++)   
	{   
		IplImage* img1_copy =cvCloneImage(img1);
		printf("\n第%d个轮廓：\n",i);
		CvScalar color = CV_RGB( 0, 0,255);   
		cvZero( mask1); 
		cvZero( dst1 );  
		cvDrawContours(mask1, contour1, color, color, -1, 1);//边界线的厚度，默认为 1，得到的是轮廓外形这里设置为 -1即CV_FILLED，
		//是指对轮廓内的区域进行填充,通过cvCopy可将原图轮廓中的内容保留下来
		cvCopy(img1_copy, dst1, mask1); //可将原图轮廓中的内容保留下来
		cvSaveImage("111.bmp",dst1);//debug查看效果
		s1 = fabs(cvContourArea(contour1));//轮廓面积
		printf("  轮廓面积：%f\n",s1);
		len1=cvArcLength(contour1);
		printf("  轮廓周长：%f\n",len1);
		rect1=cvBoundingRect(contour1);//轮廓的边界框
		cvRectangle(img1_copy,cvPoint(rect1.x,rect1.y),cvPoint(rect1.x+rect1.width,rect1.y+rect1.height),CV_RGB(255,255,0));
		box1=cvMinAreaRect2(contour1);//最小矩形
		DrawBox(box1,img1_copy);
		cvMinEnclosingCircle(contour1,¢er1,&radius1);//外围圆
		cvCircle(img1_copy,cvPoint((int)center1.x,(int)center1.y),radius1,CV_RGB(0,255,0));
		ellipse1=cvFitEllipse2(contour1);//外围椭圆
		cvEllipseBox(img1_copy,ellipse1,CV_RGB(0,0,255));
		cvSaveImage("222.bmp",img1_copy);//debug查看效果
		int flag=cvCheckContourConvexity(contour1);//凹凸性，检测不准确???
		if (flag)
			printf("  为凸包\n");
		else
			printf("  为凹包\n");
		CvSeq* convexHull1=cvConvexHull2(contour1,NULL,1,1);//凸外多边形
		//当return_points=0时，用cvConvexHull2函数得到的凸外形，包含的是轮廓的定点的指针或下标，
		//而当return_points为非0时，得到的是外形点的本身。大家知道计算整个轮廓或部分轮廓的面积的函数定义为： 
		cvZero( mask1); 
		cvZero( dst1 );  
		cvDrawContours(mask1,convexHull1, color, color, -1, 2);
		cvCopy(img1_copy, dst1, mask1); //可将原图轮廓中的内容保留下来
		cvSaveImage("333.bmp",dst1);//debug查看效果
		h1 = fabs(cvContourArea(convexHull1));//轮廓面积
		printf("  凸外多边形面积为：%f\n",h1);
		//CvSeq *defects1=cvConvexityDefects(contour1,convexHull1);//缺陷
		//Seq<CvConvexityDefect> defects2=cvConvexityDefects(contour1,convexHull1);//为什么都不可以
		//d1 = fabs(cvContourArea(defects1));//轮廓面积
		//printf("  缺陷面积为：%f\n",d1);
	}
	cvReleaseMemStorage(&storage1);
	cvReleaseMemStorage(&storage2);
	cvReleaseMemStorage(&storage3);
	cvReleaseMemStorage(&storage4);

}

转载自http://blog.csdn.net/wuxiaoyao12/article/details/7574757

wangtaohappy
关注
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值