Hyperledger fabric部署链码（五）初始化与链码升级

链码定义提交到channel后，将在安装链码的通道的peer节点上启动。asset-transfer (basic) 链码现在可以由客户端应用程序通过命令行直接调用。使用以下命令在ledger上创建一组初始资产(初始化)。请注意，调用命令需要针对足够数量的peer（包含多个组织），以满足链码认可策略。(注意 CLI 无法访问 Fabric Gateway 对等peer，因此必须指定每个背书对等peer）。

链码初始化

peer chaincode invoke -o localhost:7050 --ordererTLSHostnameOverride orderer.example.com --tls --cafile "${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem" -C mychannel -n basic --peerAddresses localhost:7051 --tlsRootCertFiles "${PWD}/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt" --peerAddresses localhost:9051 --tlsRootCertFiles "${PWD}/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt" -c '{"function":"InitLedger","Args":[]}'

如果命令成功执行，将在终端看到以下类似响应：

2020-02-12 18:22:20.576 EST [chaincodeCmd] chaincodeInvokeOrQuery -> INFO 001 Chaincode invoke successful. result: status:200

链码查询

我们可以使用部署链码中的查询方法读取链码创建的asset：

peer chaincode query -C mychannel -n basic -c '{"Args":["GetAllAssets"]}'

查询结果为

[{"Key":"asset1","Record":{"ID":"asset1","color":"blue","size":5,"owner":"Tomoko","appraisedValue":300}},
{"Key":"asset2","Record":{"ID":"asset2","color":"red","size":5,"owner":"Brad","appraisedValue":400}},
{"Key":"asset3","Record":{"ID":"asset3","color":"green","size":10,"owner":"Jin Soo","appraisedValue":500}},
{"Key":"asset4","Record":{"ID":"asset4","color":"yellow","size":10,"owner":"Max","appraisedValue":600}},
{"Key":"asset5","Record":{"ID":"asset5","color":"black","size":15,"owner":"Adriana","appraisedValue":700}},
{"Key":"asset6","Record":{"ID":"asset6","color":"white","size":15,"owner":"Michel","appraisedValue":800}}]

链码更新

对于链码更新流程，我们可以使用同链码部署大致相同的命令来部署新版本的链码：

• 通道成员通过安装新的链码包，批准带有新链码包ID、新链码包版本和序列号自增1的链码定义来升级链码。（新的链码定义提交到通道后即可使用，此流程允许通道成员在链码升级时进行协调，并确保在新链码部署到通道前，有满足策略数量的通道成员准备好批准新链码）
  因前文以描述如何部署链码，所以，在更新链码章节精简命令，不再过多介绍

1、配置环境变量

export PATH=${PWD}/../bin:$PATH
export FABRIC_CFG_PATH=$PWD/../config/
export CORE_PEER_MSPCONFIGPATH=${PWD}/organizations/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp

2、编译链码包并赋予版本号标签

peer lifecycle chaincode package basic_2.tar.gz --path ../asset-transfer-ledger-queries/chaincode-go/ --lang golang --label basic_2.0

3、org1的peer CIL配置

export CORE_PEER_TLS_ENABLED=true
export CORE_PEER_LOCALMSPID="Org1MSP"
export CORE_PEER_TLS_ROOTCERT_FILE=${PWD}/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
export CORE_PEER_MSPCONFIGPATH=${PWD}/organizations/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
export CORE_PEER_ADDRESS=localhost:7051

4、基于org1执行安装新版本链码

peer lifecycle chaincode install basic_2.tar.gz

5、查询已安装链码

通过此步骤，查询新版本链码的PackageID和对应链码文件的哈希值(b步骤四的终端返回值也有相关信息)

peer lifecycle chaincode queryinstalled

6、引用新版本链码作为环境变量

(后面package和hash按实际情况更新)

export NEW_CC_PACKAGE_ID=basic_2.0:e28cb715087273c5f8972aa579bdcca6e8a683f6053b9a9a63ba43bd1dbdb9d5

7、org1同意新版本链码的更新

peer lifecycle chaincode approveformyorg -o localhost:7050 --ordererTLSHostnameOverride orderer.example.com --channelID mychannel --name basic --version 2.0 --package-id $NEW_CC_PACKAGE_ID --sequence 2 --tls --cafile "${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem"

8、org2的peer CIL配置

export CORE_PEER_LOCALMSPID="Org2MSP"
export CORE_PEER_TLS_ROOTCERT_FILE=${PWD}/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
export CORE_PEER_MSPCONFIGPATH=${PWD}/organizations/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
export CORE_PEER_ADDRESS=localhost:9051

9、基于org2执行安装新版本链码

peer lifecycle chaincode install basic_2.tar.gz

10、org2同意新版本的更新

peer lifecycle chaincode approveformyorg -o localhost:7050 --ordererTLSHostnameOverride orderer.example.com --channelID mychannel --name basic --version 2.0 --package-id $NEW_CC_PACKAGE_ID --sequence 2 --tls --cafile "${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem"

11、检查命令，查看是否有足够多的组织都同意更新

peer lifecycle chaincode checkcommitreadiness --channelID mychannel --name basic --version 2.0 --sequence 2 --tls --cafile "${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem" --output json

12、升级链码命令

新的 chaincode 定义提交后，通道上的 chaincode 将升级。在此之前，之前的 chaincode 将继续在两个组织的对等机上运行。Org2 可以使用以下命令升级 chaincode（任意一个组织都可以）：

peer lifecycle chaincode commit -o localhost:7050 --ordererTLSHostnameOverride orderer.example.com --channelID mychannel --name basic --version 2.0 --sequence 2 --tls --cafile "${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem" --peerAddresses localhost:7051 --tlsRootCertFiles "${PWD}/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt" --peerAddresses localhost:9051 --tlsRootCertFiles "${PWD}/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt"

13、查看链码升级结果

可以通过docker查看容器命令来看版本是否成功更新

docker ps -a

$ docker ps
CONTAINER ID        IMAGE                                                                                                                                                                    COMMAND                  CREATED             STATUS              PORTS                              NAMES
7bf2f1bf792b        dev-peer0.org1.example.com-basic_2.0-572cafd6a972a9b6aa3fa4f6a944efb6648d363c0ba4602f56bc8b3f9e66f46c-69c9e3e44ed18cafd1e58de37a70e2ec54cd49c7da0cd461fbd5e333de32879b   "docker-entrypoint.s…"   2 minutes ago       Up 2 minutes                                           dev-peer0.org1.example.com-basic_2.0-572cafd6a972a9b6aa3fa4f6a944efb6648d363c0ba4602f56bc8b3f9e66f46c
985e0967c27a        dev-peer0.org2.example.com-basic_2.0-572cafd6a972a9b6aa3fa4f6a944efb6648d363c0ba4602f56bc8b3f9e66f46c-158e9c6a4cb51dea043461fc4d3580e7df4c74a52b41e69a25705ce85405d760   "docker-entrypoint.s…"   2 minutes ago       Up 2 minutes                                           dev-peer0.org2.example.com-basic_2.0-572cafd6a972a9b6aa3fa4f6a944efb6648d363c0ba4602f56bc8b3f9e66f46c
31fdd19c3be7        hyperledger/fabric-peer:latest                                                                                                                                           "peer node start"        About an hour ago   Up About an hour    0.0.0.0:7051->7051/tcp             peer0.org1.example.com
1b17ff866fe0        hyperledger/fabric-peer:latest                                                                                                                                           "peer node start"        About an hour ago   Up About an hour    7051/tcp, 0.0.0.0:9051->9051/tcp   peer0.org2.example.com
4cf170c7ae9b        hyperledger/fabric-orderer:latest

14、备注

以上链码升级命令并不包含，对链码的重新初始化，如果有对旧版本链码的原有数据结构进行大规模改造，可以尝试在升级链码的流程中添加重新初始化参数--init-required

• 初始化参数需添加在各个组织同意链码更新命令中（已org2命令为例）

peer lifecycle chaincode approveformyorg -o localhost:7050 --ordererTLSHostnameOverride orderer.example.com --channelID mychannel --name basic --version 2.0 --package-id $NEW_CC_PACKAGE_ID --sequence 2 --tls --cafile "${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem" --init-required

• 需要将各个组织的同意命令同意添加此参数,并在最后链码升级命令中也添加此参数

peer lifecycle chaincode commit -o localhost:7050 --ordererTLSHostnameOverride orderer.example.com --channelID mychannel --name basic --version 2.0 --sequence 2 --tls --cafile "${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem" --peerAddresses localhost:7051 --tlsRootCertFiles "${PWD}/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt" --peerAddresses localhost:9051 --tlsRootCertFiles "${PWD}/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt" --init-required

这样就可以让链码在升级过程中，自动执行初始化函数了。