VS2005 下的串口程序的实现代码

刚才浏览,帖子时,发现有人问到了VS2005写串口程序,和设备通信的问题, 记得以前曾做过类似的例子,贴出来

namespace JustinIO
{
    public partial class Form1 : Form
    {
        CommPort testCom = new CommPort();
        public Form1()
        {
            InitializeComponent();
        }

        private void Form1_Load(object sender, EventArgs e)
        {

        }

        private void button1_Click(object sender, EventArgs e)
        {
           string  st;
            byte aa;
            byte bb;
            byte[] sendbyte ={ 0x40, 0x02, 0x02, 0xbc };
            byte[] readbyte = new byte [256];
            int readnum;
            readnum = 12;
          //  CommPort testCom = new CommPort();
            testCom.PortNum = "COM1";
            testCom.Parity = 0;
            testCom.StopBits = 1;
            testCom.ReadTimeout = 1000;
            testCom.BaudRate = 57600;
            testCom.ByteSize = 120;
            testCom.Open();        

            testCom.Write(sendbyte);
            for (int i = 0; i < 2000; i++)
            { }

            readbyte=testCom.Read(readnum);
            //aa　=　readbyte[0];
            //bb = readbyte[1];

            for (int i = 0; i < 2000; i++)
            { }
            st=null;
            for (int ii = 0; ii < readbyte[1]+2; ii++)
            {
               st += string.Format("{0:X2} ",readbyte[ii]);
            }
            textBox1.Text =st;//textBox1.Text = readbyte[0].ToString();
          //  testCom.Close();
           
           
        }

        private void button2_Click(object sender, EventArgs e)
        {
            string st;
            int readnum;
            readnum = 12;
            byte[] sendbyte ={ 0x40, 0x02, 0x02, 0xbc };
            byte[] readbyte = new byte[256];

            testCom.Write(sendbyte);
            for (int i = 0; i < 2000; i++)
            { }

            readbyte = testCom.Read(readnum);
            //aa　=　readbyte[0];
            //bb = readbyte[1];

            for (int i = 0; i < 2000; i++)
            { }
            st = null;
            for (int ii = 0; ii < readbyte[1] + 2; ii++)
            {
                st += string.Format("{0:X2} ", readbyte[ii]);
            }
            textBox1.Text = st;//textBox1.Text = readbyte[0].ToString();
        }

        private void button3_Click(object sender, EventArgs e)
        {
            testCom.Close();
        }

       
    }
}

 

 

using System;
using System.Collections.Generic;
using System.Text;
using System.Runtime.InteropServices;

namespace JustinIO
{
   class CommPort
    {

        public string PortNum;
        public int BaudRate;
        public byte ByteSize;
        public byte Parity; // 0-4=no,odd,even,mark,space 
        public byte StopBits; // 0,1,2 = 1, 1.5, 2 
        public int ReadTimeout;

        //comm port win32 file handle
        public   int hComm = -1;
     //  public static int hComm = -1;
        public bool Opened = false;

        //win32 api constants
        private const uint GENERIC_READ = 0x80000000;
        private const uint GENERIC_WRITE = 0x40000000;
        private const int OPEN_EXISTING = 3;
        public  const int INVALID_HANDLE_VALUE = -1;

        [StructLayout(LayoutKind.Sequential)]
        public struct DCB
        {
            //taken from c struct in platform sdk 
            public int DCBlength;           // sizeof(DCB) 
            public int BaudRate;            // 指定当前波特率 current baud rate
            // these are the c struct bit fields, bit twiddle flag to set
            public int fBinary;          // 指定是否允许二进制模式,在windows95中必须主TRUE binary mode, no EOF check 
            public int fParity;          // 指定是否允许奇偶校验 enable parity checking 
            public int fOutxCtsFlow;      // 指定CTS是否用于检测发送控制，当为TRUE是CTS为OFF，发送将被挂起。 CTS output flow control 
            public int fOutxDsrFlow;      // 指定CTS是否用于检测发送控制 DSR output flow control 
            public int fDtrControl;       // DTR_CONTROL_DISABLE值将DTR置为OFF, DTR_CONTROL_ENABLE值将DTR置为ON, DTR_CONTROL_HANDSHAKE允许DTR"握手" DTR flow control type 
            public int fDsrSensitivity;   // 当该值为TRUE时DSR为OFF时接收的字节被忽略 DSR sensitivity 
            public int fTXContinueOnXoff; // 指定当接收缓冲区已满,并且驱动程序已经发送出XoffChar字符时发送是否停止。TRUE时，在接收缓冲区接收到缓冲区已满的字节XoffLim且驱动程序已经发送出XoffChar字符中止接收字节之后，发送继续进行。　FALSE时，在接收缓冲区接收到代表缓冲区已空的字节XonChar且驱动程序已经发送出恢复发送的XonChar之后，发送继续进行。XOFF continues Tx 
            public int fOutX;          // TRUE时，接收到XoffChar之后便停止发送接收到XonChar之后将重新开始 XON/XOFF out flow control 
            public int fInX;           // TRUE时，接收缓冲区接收到代表缓冲区满的XoffLim之后，XoffChar发送出去接收缓冲区接收到代表缓冲区空的XonLim之后，XonChar发送出去 XON/XOFF in flow control 
            public int fErrorChar;     // 该值为TRUE且fParity为TRUE时，用ErrorChar 成员指定的字符代替奇偶校验错误的接收字符 enable error replacement 
            public int fNull;          // eTRUE时，接收时去掉空（0值）字节 enable null stripping 
            public int fRtsControl;     // RTS flow control 
            /*RTS_CONTROL_DISABLE时,RTS置为OFF
             RTS_CONTROL_ENABLE时, RTS置为ON
           RTS_CONTROL_HANDSHAKE时,
           当接收缓冲区小于半满时RTS为ON
              当接收缓冲区超过四分之三满时RTS为OFF
           RTS_CONTROL_TOGGLE时,
           当接收缓冲区仍有剩余字节时RTS为ON ,否则缺省为OFF*/

            public int fAbortOnError;   // TRUE时,有错误发生时中止读和写操作 abort on error 
            public int fDummy2;        // 未使用 reserved 

            public uint flags;
            public ushort wReserved;          // 未使用,必须为0 not currently used 
            public ushort XonLim;             // 指定在XON字符发送这前接收缓冲区中可允许的最小字节数 transmit XON threshold 
            public ushort XoffLim;            // 指定在XOFF字符发送这前接收缓冲区中可允许的最小字节数 transmit XOFF threshold 
            public byte ByteSize;           // 指定端口当前使用的数据位   number of bits/byte, 4-8 
            public byte Parity;             // 指定端口当前使用的奇偶校验方法,可能为:EVENPARITY,MARKPARITY,NOPARITY,ODDPARITY  0-4=no,odd,even,mark,space 
            public byte StopBits;           // 指定端口当前使用的停止位数,可能为:ONESTOPBIT,ONE5STOPBITS,TWOSTOPBITS  0,1,2 = 1, 1.5, 2 
            public char XonChar;            // 指定用于发送和接收字符XON的值 Tx and Rx XON character 
            public char XoffChar;           // 指定用于发送和接收字符XOFF值 Tx and Rx XOFF character 
            public char ErrorChar;          // 本字符用来代替接收到的奇偶校验发生错误时的值 error replacement character 
            public char EofChar;            // 当没有使用二进制模式时,本字符可用来指示数据的结束 end of input character 
            public char EvtChar;            // 当接收到此字符时,会产生一个事件 received event character 
            public ushort wReserved1;         // 未使用 reserved; do not use 
        }

        [StructLayout(LayoutKind.Sequential)]
        private struct COMMTIMEOUTS
        {
            public int ReadIntervalTimeout;
            public int ReadTotalTimeoutMultiplier;
            public int ReadTotalTimeoutConstant;
            public int WriteTotalTimeoutMultiplier;
            public int WriteTotalTimeoutConstant;
        }

        [StructLayout(LayoutKind.Sequential)]
        private struct OVERLAPPED
        {
            public int Internal;
            public int InternalHigh;
            public int Offset;
            public int OffsetHigh;
            public int hEvent;
        }

        [DllImport("kernel32.dll")]
        private static extern int CreateFile(
          string lpFileName,                         // 要打开的串口名称
          uint dwDesiredAccess,                      // 指定串口的访问方式，一般设置为可读可写方式
          int dwShareMode,                          // 指定串口的共享模式，串口不能共享，所以设置为0
          int lpSecurityAttributes, // 设置串口的安全属性，WIN9X下不支持，应设为NULL
          int dwCreationDisposition,                // 对于串口通信，创建方式只能为OPEN_EXISTING
          int dwFlagsAndAttributes,                 // 指定串口属性与标志，设置为FILE_FLAG_OVERLAPPED(重叠I/O操作)，指定串口以异步方式通信
          int hTemplateFile                        // 对于串口通信必须设置为NULL
        );
        [DllImport("kernel32.dll")]
        private static extern bool GetCommState(
          int hFile,  //通信设备句柄
          ref DCB lpDCB    // 设备控制块DCB
        );
        [DllImport("kernel32.dll")]
        private static extern bool BuildCommDCB(
          string lpDef,  // 设备控制字符串
          ref DCB lpDCB     // 设备控制块
        );
        [DllImport("kernel32.dll")]
        private static extern bool SetCommState(
          int hFile,  // 通信设备句柄
          ref DCB lpDCB    // 设备控制块
        );
        [DllImport("kernel32.dll")]
        private static extern bool GetCommTimeouts(
          int hFile,                  // 通信设备句柄 handle to comm device
          ref COMMTIMEOUTS lpCommTimeouts  // 超时时间 time-out values
        );
        [DllImport("kernel32.dll")]
        private static extern bool SetCommTimeouts(
          int hFile,                  // 通信设备句柄 handle to comm device
          ref COMMTIMEOUTS lpCommTimeouts  // 超时时间 time-out values
        );
        [DllImport("kernel32.dll")]
        private static extern bool ReadFile(
          int hFile,                // 通信设备句柄 handle to file
          byte[] lpBuffer,             // 数据缓冲区 data buffer
          int nNumberOfBytesToRead,  // 多少字节等待读取 number of bytes to read
          ref int lpNumberOfBytesRead, // 读取多少字节 number of bytes read
          ref OVERLAPPED lpOverlapped    // 溢出缓冲区 overlapped buffer
        );
        [DllImport("kernel32.dll")]
        private static extern bool WriteFile(
          int hFile,                    // 通信设备句柄 handle to file
          byte[] lpBuffer,                // 数据缓冲区 data buffer
          int nNumberOfBytesToWrite,     // 多少字节等待写入 number of bytes to write
          ref int lpNumberOfBytesWritten,  // 已经写入多少字节 number of bytes written
          ref OVERLAPPED lpOverlapped        // 溢出缓冲区 overlapped buffer
        );
        [DllImport("kernel32.dll")]
        private static extern bool CloseHandle(
          int hObject   // handle to object
        );
        [DllImport("kernel32.dll")]
        private static extern uint GetLastError();

        public void Open()
        {

            DCB dcbCommPort = new DCB();
            COMMTIMEOUTS ctoCommPort = new COMMTIMEOUTS();

            // 打开串口 OPEN THE COMM PORT.
            hComm = CreateFile(PortNum, GENERIC_READ | GENERIC_WRITE, 0, 0, OPEN_EXISTING, 0, 0);
            // 如果串口没有打开，就打开 IF THE PORT CANNOT BE OPENED, BAIL OUT.
            if (hComm == INVALID_HANDLE_VALUE)
            {
                throw (new ApplicationException("非法操作，不能打开串口！"));
            }

            // 设置通信超时时间 SET THE COMM TIMEOUTS.
            GetCommTimeouts(hComm, ref ctoCommPort);
            ctoCommPort.ReadTotalTimeoutConstant = ReadTimeout;
            ctoCommPort.ReadTotalTimeoutMultiplier = 0;
            ctoCommPort.WriteTotalTimeoutMultiplier = 0;
            ctoCommPort.WriteTotalTimeoutConstant = 0;
            SetCommTimeouts(hComm, ref ctoCommPort);

            // 设置串口 SET BAUD RATE, PARITY, WORD SIZE, AND STOP BITS.
            GetCommState(hComm, ref dcbCommPort);
            dcbCommPort.BaudRate = BaudRate;
            dcbCommPort.flags = 0;
            //dcb.fBinary=1;
            dcbCommPort.flags |= 1;
            if (Parity > 0)
            {
                //dcb.fParity=1
                dcbCommPort.flags |= 2;
            }
            dcbCommPort.Parity = Parity;
            dcbCommPort.ByteSize = ByteSize;
            dcbCommPort.StopBits = StopBits;
            if (!SetCommState(hComm, ref dcbCommPort))
            {
                //uint ErrorNum=GetLastError();
                throw (new ApplicationException("非法操作，不能打开串口！"));
            }
            //unremark to see if setting took correctly
            //DCB dcbCommPort2 = new DCB();
            //GetCommState(hComm, ref dcbCommPort2);
            Opened = true;
        }

        public void Close()
        {
            if (hComm != INVALID_HANDLE_VALUE)
            {
                CloseHandle(hComm);
            }
        }

        public byte[] Read(int NumBytes)
        {
            byte[] BufBytes;
            byte[] OutBytes;
            BufBytes = new byte[NumBytes];
            if (hComm != INVALID_HANDLE_VALUE)
            {
                OVERLAPPED ovlCommPort = new OVERLAPPED();
                int BytesRead = 0;
                ReadFile(hComm, BufBytes, NumBytes, ref BytesRead, ref ovlCommPort);
                OutBytes = new byte[BytesRead];
                Array.Copy(BufBytes, OutBytes, BytesRead);
            }
            else
            {
                throw (new ApplicationException("串口未打开！"));
            }
            return OutBytes;
        }

        public void Write(byte[] WriteBytes)
        {
            if (hComm != INVALID_HANDLE_VALUE)
            {
                OVERLAPPED ovlCommPort = new OVERLAPPED();
                int BytesWritten = 0;
                WriteFile(hComm, WriteBytes, WriteBytes.Length, ref BytesWritten, ref ovlCommPort);
            }
            else
            {
                throw (new ApplicationException("串口未打开！"));
            }
        }
    }
}