20240615给飞凌的OK3588-C开发板刷Rockchip原厂的Buildroot后的测试报告

20240615给飞凌的OK3588-C开发板刷Rockchip原厂的Buildroot后的测试报告：

【切记，由于没有替换DTS的，开发板发热量巨大！因此配备鼓风机进行加强散热了】
0、adb 默认没有
1、HDMI IN 4K    2024/6/15 20:32 4K全屏
2、HDMI OUT    2024/6/15 20:26 默认竖屏
3、USB2.0   2024/6/15 20:41    
4、TF卡    2024/6/15 20:46
?5、RJ45 LAN   EHT0 ETH1 都是黄灯闪烁
6、FPGA  LVDS转MIPI    2024/6/12 14:27 偶发性图像错位！
?7、串口 tty0 3    ？ttyS4
8、USB3.0    2024/6/15 20:41    【在type-C1】usb2.0摄像头应该通了。看到时间了
9、TP+LCD    由于不同的SDK互刷，曾经发生过烧毁的情况。在移植好驱动之前，暂时先不打开了！

测试步骤：
1、HDMI IN 4K   2024/6/13 14:08
v4l2-ctl --list-devices
v4l2-ctl --list-formats-ext -d /dev/video8
v4l2-ctl -V -d /dev/video8
gst-launch-1.0 v4l2src device=/dev/video8 ! videoconvert ! kmssink

v4l2-ctl --list-devices
v4l2-ctl --list-formats-ext -d /dev/video20
v4l2-ctl -V -d /dev/video20
gst-launch-1.0 v4l2src device=/dev/video20 ! videoconvert ! kmssink
 
root@ok3588:/# 
root@ok3588:/# 
root@ok3588:/# media-ctl -d /dev/media0
root@ok3588:/# 
root@ok3588:/# 
root@ok3588:/# 
root@ok3588:/# media-ctl -d -p /dev/media0
Failed to enumerate -p (-2)
root@ok3588:/# v4l2-ctl --list-devices
rk_hdmirx (fdee0000.hdmirx-controller):
    /dev/video8

rkcif-mipi-lvds2 (platform:rkcif):
    /dev/media0

rkcif (platform:rkcif-mipi-lvds2):
    /dev/video0
    /dev/video1
    /dev/video2
    /dev/video3
    /dev/video4
    /dev/video5
    /dev/video6
    /dev/video7

root@ok3588:/# 
root@ok3588:/# 
root@ok3588:/# 
root@ok3588:/# v4l2-ctl --list-formats-ext -d /dev/video8
ioctl: VIDIOC_ENUM_FMT
    Type: Video Capture Multiplanar

    [0]: 'BGR3' (24-bit BGR 8-8-8)
    [1]: 'NV24' (Y/CbCr 4:4:4)
    [2]: 'NV16' (Y/CbCr 4:2:2)
    [3]: 'NV12' (Y/CbCr 4:2:0)
root@ok3588:/# 
root@ok3588:/# 
root@ok3588:/# 
root@ok3588:/# v4l2-ctl --list-formats-ext -d /dev/video8
ioctl: VIDIOC_ENUM_FMT
    Type: Video Capture Multiplanar

    [0]: 'BGR3' (24-bit BGR 8-8-8)
    [1]: 'NV24' (Y/CbCr 4:4:4)
    [2]: 'NV16' (Y/CbCr 4:2:2)
    [3]: 'NV12' (Y/CbCr 4:2:0)
root@ok3588:/# 
root@ok3588:/# 
root@ok3588:/# 
root@ok3588:/# v4l2-ctl -V -d /dev/video8
Format Video Capture Multiplanar:
    Width/Height      : 3840/2160
    Pixel Format      : 'BGR3' (24-bit BGR 8-8-8)
    Field             : None
    Number of planes  : 1
    Flags             : premultiplied-alpha, 0x000000fe
    Colorspace        : sRGB
    Transfer Function : Default
    YCbCr/HSV Encoding: Unknown (0x000000ff)
    Quantization      : Full Range
    Plane 0           :
       Bytes per Line : 11520
       Size Image     : 24883200
koot@ok3588:/# gst-launch-1.0 v4l2src device=/dev/video8 ! videoconvert ! kmssin 
Setting pipeline to PAUSED ...
Using mplane plugin for capture 
Pipeline is live and does not need PREROLL ...
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
Redistribute latency...
^Chandling interrupt.
Interrupt: Stopping pipeline ...
Execution ended after 0:00:37.367969922
Setting pipeline to NULL ...
Freeing pipeline ...
root@ok3588:/# 

2、HDMI OUT    2024/6/12 14:24
开机显示

3、USB2.0 x2    
root@ok3588:/# 
root@ok3588:/# v4l2-ctl --list-devices
rk_hdmirx (fdee0000.hdmirx-controller):
    /dev/video8

rkcif-mipi-lvds2 (platform:rkcif):
    /dev/media0

rkcif (platform:rkcif-mipi-lvds2):
    /dev/video0
    /dev/video1
    /dev/video2
    /dev/video3
    /dev/video4
    /dev/video5
    /dev/video6
    /dev/video7

HD WEBCAM: HD 2MP WEBCAM (usb-fc880000.usb-1):
    /dev/video9
    /dev/video10
    /dev/media1

root@ok3588:/# 
v4l2-ctl --list-formats-ext -d /dev/video9
gst-launch-1.0 v4l2src  device=/dev/video9 ! image/jpeg,width=1920,height=1080 ! jpegdec ! videoconvert ! autovideosink

v4l2-ctl --list-devices
v4l2-ctl --list-formats-ext -d /dev/video21
gst-launch-1.0 v4l2src  device=/dev/video21 ! image/jpeg,width=1920,height=1080 ! jpegdec ! videoconvert ! autovideosink

4、TF卡    2024/6/12 14:38
root@ok3588:/# 
root@ok3588:/# fdisk -l
Found valid GPT with protective MBR; using GPT

Disk /dev/mmcblk0: 120832000 sectors, 1656M
Logical sector size: 512
Disk identifier (GUID): 6e0f0000-0000-4c5a-8000-6dcb000019d8
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 120831966

Number  Start (sector)    End (sector)  Size Name
     1           16384           24575 4096K uboot
     2           24576           32767 4096K misc
     3           32768          163839 64.0M boot
     4          163840          425983  128M recovery
     5          425984          491519 32.0M backup
     6          491520        29851647 14.0G rootfs
     7        29851648        30113791  128M oem
     8        30113792       120831935 43.2G userdata
Disk /dev/mmcblk1: 29 GB, 31270109184 bytes, 61074432 sectors
3817152 cylinders, 1 heads, 16 sectors/track
Units: sectors of 1 * 512 = 512 bytes

Device       Boot StartCHS    EndCHS        StartLBA     EndLBA    Sectors  Size Id Type
/dev/mmcblk1p1    0,0,0       0,0,0               32   61074431   61074400 29.1G  c Win95 FAT32 (LBA)
root@ok3588:/# 
root@ok3588:/# 
root@ok3588:/# 
root@ok3588:/# mount ^C
root@ok3588:/# mount /dev/mmcblk1p1 /mnt
root@ok3588:/# cd /mnt

gst-launch-1.0 filesrc location=1.mp4 ! qtdemux ! queue ! h264parse ! mppvideodec ! waylandsink "render-rectangle=<0,0,1920,1080>"

gst-launch-1.0 filesrc location=4kl.mp4 ! qtdemux ! queue ! h264parse ! mppvideodec ! waylandsink "render-rectangle=<0,0,1920,1080>"

5、RJ45 LAN    ？2024/6/12 15:03灯闪，不上网

6、FPGA  LVDS转MIPI    2024/6/12 14:27 偶发性图像错位！
【给111 120 141上电】
cd /sys/class/gpio
echo 141 > export
cd gpio141
echo out > direction
echo 1 > value

cd /sys/class/gpio
echo 111 > export
cd gpio111
echo out > direction
echo 1 > value

cd /sys/class/gpio
echo 120 > export
cd gpio120
echo out > direction
echo 1 > value

v4l2-ctl --list-devices
v4l2-ctl --list-formats-ext -d /dev/video0
gst-launch-1.0 v4l2src device=/dev/video0 ! video/x-raw, format=NV12, width=1920,height=1080, framerate=30/1 ! waylandsink

2024/6/13 11:36 串口好了
7、串口 tty0 3    2024/6/12 14:42【能发不能收！】
root@ok3588:/mnt# cd /dev
root@ok3588:/dev# 
root@ok3588:/dev# 
root@ok3588:/dev# ls -l ttyS*
crw-rw---- 1 root dialout 4, 64 Jan  1 08:00 ttyS0
crw-rw---- 1 root dialout 4, 67 Jan  1 08:00 ttyS3
crw-rw---- 1 root dialout 4, 68 Jan  1 08:00 ttyS4
crw-rw---- 1 root dialout 4, 70 Jan  1 08:00 ttyS6
crw-rw---- 1 root dialout 4, 73 Jan  1 08:00 ttyS9
root@ok3588:/dev# 

root@ok3588:/mnt# ./uart_test /dev/ttyS3 115200 8 0 1
root@ok3588:/mnt# ./uart_test /dev/ttyS0 115200 8 0 1

 
8、USB3.0    通过。2024/6/13 15:04
测试模式，播放U盘里面的MP4流畅，拷贝文件。

这个 参数满屏了。解码4K录像（通过OV13855录像的）
gst-launch-1.0 filesrc location=1.mp4 ! qtdemux ! queue ! h264parse ! mppvideodec ! waylandsink "render-rectangle=<0,0,1024,600>"

gst-launch-1.0 filesrc location=1.mp4 ! qtdemux ! queue ! h264parse ! mppvideodec ! waylandsink "render-rectangle=<0,0,1920,1080>"

gst-launch-1.0 filesrc location=4kl.mp4 ! qtdemux ! queue ! h264parse ! mppvideodec ! waylandsink "render-rectangle=<0,0,1920,1080>"

root@ok3588:/# 
root@ok3588:/# fdisk -l
Found valid GPT with protective MBR; using GPT

Disk /dev/mmcblk0: 120832000 sectors, 1656M
Logical sector size: 512
Disk identifier (GUID): 13650000-0000-446f-8000-5e9c000013c2
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 120831966

Number  Start (sector)    End (sector)  Size Name
     1           16384           24575 4096K uboot
     2           24576           32767 4096K misc
     3           32768          163839 64.0M boot
     4          163840          425983  128M recovery
     5          425984          491519 32.0M backup
     6          491520        29851647 14.0G rootfs
     7        29851648        30113791  128M oem
     8        30113792       120831935 43.2G userdata
Disk /dev/sda: 115 GB, 123060879360 bytes, 240353280 sectors
14961 cylinders, 255 heads, 63 sectors/track
Units: sectors of 1 * 512 = 512 bytes

Device  Boot StartCHS    EndCHS        StartLBA     EndLBA    Sectors  Size Id Type
/dev/sda1 *  0,32,33     1023,254,63       2048  240353279  240351232  114G  c Win95 FAT32 (LBA)
root@ok3588:/# 
root@ok3588:/# 
root@ok3588:/# 
root@ok3588:/# mount /dev/sda1 /mnt
root@ok3588:/# ls -l
total 100
drwxr-xr-x   2 root root  4096 Mar  9  2023 bin
-rw-r--r--   1 root root   351 Mar  9  2023 busybox.fragment
lrwxrwxrwx   1 root root     8 Mar  9  2023 data -> userdata
drwxr-xr-x  15 root root  3880 Jan  1 08:02 dev
drwxr-xr-x  23 root root  4096 Jan  1 08:00 etc
drwxr-xr-x   4 root root  4096 Jan  1 08:00 home
drwxr-xr-x   6 root root  4096 Aug 17  2023 lib
lrwxrwxrwx   1 root root     3 Mar  9  2023 lib64 -> lib
lrwxrwxrwx   1 root root    11 Mar  9  2023 linuxrc -> bin/busybox
drwx------   2 root root 16384 Mar  9  2023 lost+found
drwxr-xr-x  14 root root  4096 Mar  9  2023 media
lrwxrwxrwx   1 root root    23 Mar  9  2023 misc -> /dev/block/by-name/misc
drwxr-xr-x  15 root root 32768 Jan  1 08:00 mnt
drwxr-xr-x   3 root root  4096 Jun 13  2024 oem
drwxr-xr-x   2 root root  4096 Mar  9  2023 opt
dr-xr-xr-x 256 root root     0 Jan  1 08:00 proc
drwx------   2 root root  4096 Mar  9  2023 root
drwxr-xr-x   7 root root   340 Jan  1 08:00 run
drwxr-xr-x   2 root root  4096 Sep 14  2023 sbin
lrwxrwxrwx   1 root root    10 Mar  9  2023 sdcard -> mnt/sdcard
dr-xr-xr-x  14 root root     0 Jan  1 08:00 sys
drwxrwxrwt   8 root root   440 Jan  1 08:02 tmp
lrwxrwxrwx   1 root root     9 Mar  9  2023 udisk -> mnt/udisk
drwxr-xr-x   5 root root  4096 Jan  1 08:00 userdata
drwxr-xr-x  11 root root  4096 Sep 14  2023 usr
drwxr-xr-x   5 root root  4096 Mar  9  2023 var
root@ok3588:/# 
root@ok3588:/# cd /mnt/
root@ok3588:/mnt# 
root@ok3588:/mnt# ls -l
total 1416928
-rwxr-xr-x 1 root root 1131762455 Mar 10  2022  1.mp4
-rwxr-xr-x 1 root root         33 Jan  1  1980  1.txt
-rwxr-xr-x 1 root root         33 Jan  1  1980  20240528USB.txt
-rwxr-xr-x 1 root root  235026155 Oct 17  2023  4kl.mp4
drwxr-xr-x 3 root root      32768 Dec 17  2023  EFI
drwxr-xr-x 2 root root      32768 May 28  2024  FOUND.000
-rwxr-xr-x 1 root root     233258 Apr 18  2024  KMS_VL_ALL_AIO_v39_CNcmd
drwxr-xr-x 2 root root      32768 Dec 17  2023 'System Volume Information'
drwxr-xr-x 4 root root      32768 Feb  9  2024  X99+RTX4090
-rwxr-xr-x 1 root root      34494 Dec 17  2023  autorun.ico
-rwxr-xr-x 1 root root        254 Dec 17  2023  autorun.inf
drwxr-xr-x 3 root root      32768 Dec 17  2023  boot
drwxr-xr-x 2 root root      32768 Dec 17  2023  casper
drwxr-xr-x 3 root root      32768 Dec 17  2023  dists
drwxr-xr-x 2 root root      32768 Dec 17  2023  install
drwxr-xr-x 2 root root      32768 Dec 17  2023  isolinux
-r-xr-xr-x 1 root root      69145 Dec 17  2023  ldlinux.sys
-rwxr-xr-x 1 root root      67599 Dec 17  2023  md5sum.txt
drwxr-xr-x 4 root root      32768 Dec 17  2023  pool
drwxr-xr-x 2 root root      32768 Dec 17  2023  preseed
-rwxr-xr-x 1 root root         94 Dec 17  2023  syslinux.cfg
-rwxr-xr-x 1 root root          1 Dec 17  2023  ubuntu
-rwxr-xr-x 1 root root   46730293 Apr 17  2024 'video(16).mp4'
-rwxr-xr-x 1 root root   36259983 Apr 17  2024 'video(17).mp4'
-rwxr-xr-x 1 root root          0 Apr 18  2024 ''$'\346\226\260\345\273\272'' '$'\346\226\207\346\234\254\346\226\207\346\241\243''.txt'
drwxr-xr-x 3 root root      32768 Jan 19  2024 ''$'\346\226\260\345\273\272\346\226\207\344\273\266\345\244\271'
root@ok3588:/mnt# 
root@ok3588:/mnt# 
parse ! mppvideodec ! waylandsink "render-rectangle=<0,0,1920,1080>"queue ! h264 
Setting pipeline to PAUSED ...
Pipeline is PREROLLING ...
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
Redistribute latency...
New clock: GstSystemClock
Got EOS from element "pipeline0".
Execution ended after 0:04:51.958690626
Setting pipeline to NULL ...
Freeing pipeline ...
root@ok3588:/mnt# 

参考资料：
cd /sys/class/gpio
echo 141 > export
cd gpio141
echo out > direction
echo 1 > value

cd /sys/class/gpio
echo 111 > export
cd gpio111
echo out > direction
echo 1 > value

cd /sys/class/gpio
echo 120 > export
cd gpio120
echo out > direction
echo 1 > value

media-ctl -d /dev/media0 -p

【给FPGA刷机之前必须给3个GPIO口上电！】

2024/6/13 15:19【测试报告】

1、HDMI IN 4K 【通】
2、HDMI OUT 【通】
?3、USB2.0 x2 【通一个，一个不同】
4、TF卡 【通】
?5、RJ45 LAN 【灯闪，不上网】
6、FPGA  LVDS转MIPI 【通】
7、串口 tty0 3 【2个都是能发、能收】
8、USB3.0  测试模式，播放U盘里面的MP4，拷贝文件。

 

[BEGIN] 2024/6/15 20:23:23
DDR d5483af87d cym 23/11/23-16:15:24,fwver: v1.15
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x13
CH0 RX Vref:27.9%, TX Vref:23.8%,0.0%
CH1 RX Vref:30.1%, TX Vref:23.8%,0.0%
CH2 RX Vref:31.4%, TX Vref:24.8%,0.0%
CH3 RX Vref:29.3%, TX Vref:24.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-ge4e124926e-230922 #lxh (Sep 25 2023 - 10:58:38), fwver: v1.13
unknown raw ID 0 0 0
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 1
spl: mmc init failed with error: -123
Trying to boot from MMC1
Magic is incorrect.
Error validating A/B metadata from disk. Resetting and writing new A/B metadata to disk.
SPL: A/B-slot: _a, successful: 0, tries-remain: 7
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(2e8446f969...) + OK
## Checking uboot 0x00200000 ... sha256(bf7cc53d6a...) + OK
## Checking fdt 0x00345490 ... sha256(a434b1c4fe...) + OK
## Checking atf-2 0xff100000 ... sha256(9f75e6ec37...) + OK
## Checking atf-3 0x000f0000 ... sha256(c80587de50...) + OK
## Checking optee 0x08400000 ... sha256(4b2d406bfc...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 79.796/211.280 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-662-g4acbe711b-dirty:finley.xiao, fwver: v1.44
NOTICE:  BL31: Built : 16:44:24, Nov  7 2023
INFO:    spec: 0x1
INFO:    code: 0x88
INFO:    ext 32k is not valid
INFO:    ddr: stride-en 4CH
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO:    l3 cache partition cfg-0
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
I/TC: 
I/TC: OP-TEE version: 3.13.0-752-g62aa10b78 #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #2 Mon Sep 25 10:04:34 CST 2023 aarch64, fwver: v1.15 
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2017.09 (Jun 01 2024 - 15:24:59 +0800)

Model: Rockchip RK3588 Evaluation Board
MPIDR: 0x81000000
PreSerial: 2, raw, 0xfeb50000
DRAM:  4 GiB
Sysmem: init
Relocation Offset: eda18000
Relocation fdt: eb9fa160 - eb9fecd0
CR: M/C/I
Using default environment

optee api revision: 2.0
mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS400 Enhanced Strobe, 200Mhz
PartType: EFI
TEEC: Waring: Could not find security partition
DM: v2
boot mode: normal
RESC: 'boot', blk@0x00019a97
resource: sha256+
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big0_s0 800000 uV
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big1_s0 800000 uV
I2c1 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_npu_s0 800000 uV
spi2: RK806: 2
ON=0x40, OFF=0x00
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
Device 'gpio@fd8a0000': seq 0 is in use by 'gpio@fd8a0000'
serdes_power_init failed to get serdes misc device
get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts
get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts
get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts
get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts
Could not find baseparameter partition
Model: Rockchip RK3588 EVB7 V11 Board
MPIDR: 0x81000000
Minidump: init...
Rockchip UBOOT DRM driver version: v1.0.1
vp0 have layer nr:2[0 2 ], primary plane: 2
vp1 have layer nr:2[1 3 ], primary plane: 3
vp2 have layer nr:2[6 8 ], primary plane: 8
vp3 have layer nr:2[7 9 ], primary plane: 9
Using display timing dts
dsi@fde20000:  detailed mode clock 132000 kHz, flags[a]
    H: 1080 1095 1099 1129
    V: 1920 1935 1937 1952
bus_format: 100e
VOP update mode to: 1080x1920p60, type: MIPI0 for VP3
VP3 set crtc_clock to 132000KHz
VOP VP3 enable Esmart3[654x270->654x270@213x825] fmt[2] addr[0xedf04000]
final DSI-Link bandwidth: 880000 Kbps x 4
hdmi@fde80000 disconnected
i2c read err!
i2c read err!
i2c read err!
i2c read err!
i2c read err!
can't get edid block:0
failed to get edid
Could not find baseparameter partition
color_format:0
hdmi_select_link_config use tmds mode
mode:1920x1080 bus_format:0x100a
hdmi@fdea0000:  detailed mode clock 148500 kHz, flags[5]
    H: 1920 2008 2052 2200
    V: 1080 1084 1089 1125
bus_format: 100a
VOP update mode to: 1920x1080p60, type: HDMI1 for VP1
dclk:148500,if_pixclk_div;2,if_dclk_div:4
VP1 set crtc_clock to 148500KHz
VOP VP1 enable Esmart1[654x270->654x270@633x405] fmt[2] addr[0xedf04000]
CEA mode used vic=16
mtmdsclock:148500000
hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
hdptx phy pll locked!
dw_hdmi_setup HDMI mode
don't use dsc mode
dw hdmi qp use tmds mode
bus_width:0x16a8c8,bit_rate:1485000
hdptx phy lane locked!
CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
  b0pll 24000 KHz
  b1pll 24000 KHz
  lpll 24000 KHz
  v0pll 24000 KHz
  aupll 786431 KHz
  cpll 1500000 KHz
  gpll 1188000 KHz
  npll 850000 KHz
  ppll 1100000 KHz
  aclk_center_root 702000 KHz
  pclk_center_root 100000 KHz
  hclk_center_root 396000 KHz
  aclk_center_low_root 500000 KHz
  aclk_top_root 750000 KHz
  pclk_top_root 100000 KHz
  aclk_low_top_root 396000 KHz
Net:   eth1: ethernet@fe1c0000
Hit key to stop autoboot('CTRL+C'):  0 
ANDROID: reboot reason: "(none)"
Not AVB images, AVB skip
No valid android hdr
Android image load failed
Android boot failed, error -1.
## Booting FIT Image at 0xe94a6340 with size 0x02352e00
Fdt Ramdisk skip relocation
## Loading kernel from FIT Image at e94a6340 ...
   Using 'conf' configuration
## Verified-boot: 0
   Trying 'kernel' kernel subimage
     Description:  unavailable
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0xe94ec740
     Data Size:    36751872 Bytes = 35 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x00400000
     Entry Point:  0x00400000
     Hash algo:    sha256
     Hash value:   b3d7a9ea18d9093684391acb0a7ff3cfd575390860bd560a5ef2c2b2bfda6949
   Verifying Hash Integrity ... sha256+ OK
## Loading fdt from FIT Image at e94a6340 ...
   Using 'conf' configuration
   Trying 'fdt' fdt subimage
     Description:  unavailable
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0xe94a6b40
     Data Size:    285407 Bytes = 278.7 KiB
     Architecture: AArch64
     Load Address: 0x08300000
     Hash algo:    sha256
     Hash value:   41edefa03a78d90e2d66de37c6ef6119a74aa40022c7a59eeeb8488700f39383
   Verifying Hash Integrity ... sha256+ OK
   Loading fdt from 0x08300000 to 0x08300000
   Booting using the fdt blob at 0x08300000
   Loading Kernel Image from 0xe94ec740 to 0x00400000 ... OK
   kernel loaded at 0x00400000, end = 0x0270ca00
   Using Device Tree in place at 0000000008300000, end 0000000008348ade
WARNING: could not set reg FDT_ERR_BADOFFSET.
## reserved-memory:
  cma: addr=10000000 size=8000000
  drm-logo@00000000: addr=edf00000 size=b8000
  ramoops@110000: addr=110000 size=e0000
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x1f0000000 - 0x200000000 (size: 0x10000000)
Total: 846.735/1145.462 ms

Starting kernel ...

[    1.150338] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    1.150356] Linux version 5.10.198 (viewpro@viewpro-ThinkBook-16-G5-IRH) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #1 SMP Sat Jun 1 15:25:20 CST 2024
[    1.153885] random: crng init done
[    1.161755] Machine model: Rockchip RK3588 EVB7 V11 Board
[    1.197513] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
[    1.201992] printk: bootconsole [uart8250] enabled
[    1.204750] efi: UEFI not found.
[    1.210620] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[    1.211757] Reserved memory: created CMA memory pool at 0x0000000010000000, size 128 MiB
[    1.212484] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
[    1.281723] Zone ranges:
[    1.281958]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    1.282517]   DMA32    empty
[    1.282780]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    1.283338] Movable zone start for each node
[    1.283724] Early memory node ranges
[    1.284048]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    1.284613]   node   0: [mem 0x0000000009400000-0x00000000efffffff]
[    1.285180]   node   0: [mem 0x00000001f0000000-0x00000001ffffffff]
[    1.285746] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[    1.308754] psci: probing for conduit method from DT.
[    1.309215] psci: PSCIv1.1 detected in firmware.
[    1.309630] psci: Using standard PSCI v0.2 function IDs
[    1.310104] psci: Trusted OS migration not required
[    1.310545] psci: SMC Calling Convention v1.2
[    1.311301] percpu: Embedded 30 pages/cpu s83800 r8192 d30888 u122880
[    1.312050] Detected VIPT I-cache on CPU0
[    1.312445] CPU features: detected: GIC system register CPU interface
[    1.313024] CPU features: detected: Virtualization Host Extensions
[    1.313585] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    1.314224] alternatives: patching kernel code
[    1.316154] Built 1 zonelists, mobility grouping on.  Total pages: 1027656
[    1.316777] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.verifiedbootstate=orange rw rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTUUID=614e0000-0000 rcupdate.rcu_expedited=1 rcu_nocbs=all androidboot.fwver=ddr-v1.15-d5483af87d,spl-v1.13,bl31-v1.44,bl32-v1.15,uboot-06/01/2024
[    1.320406] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    1.321308] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    1.322006] mem auto-init: stack:off, heap alloc:off, heap free:off
[    1.328623] software IO TLB: mapped [mem 0x00000000e9f00000-0x00000000edf00000] (64MB)
[    1.359090] Memory: 3859208K/4175872K available (18752K kernel code, 3506K rwdata, 6888K rodata, 6656K init, 590K bss, 185592K reserved, 131072K cma-reserved)
[    1.360468] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    1.361079] ftrace: allocating 57278 entries in 224 pages
[    1.430729] ftrace: allocated 224 pages with 3 groups
[    1.431395] rcu: Hierarchical RCU implementation.
[    1.431820] rcu:     RCU event tracing is enabled.
[    1.432227] rcu:     RCU dyntick-idle grace-period acceleration is enabled.
[    1.432829]     All grace periods are expedited (rcu_expedited).
[    1.433346]     Rude variant of Tasks RCU enabled.
[    1.433755] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    1.438232] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    1.441243] GICv3: GIC: Using split EOI/Deactivate mode
[    1.441717] GICv3: 480 SPIs implemented
[    1.442062] GICv3: 0 Extended SPIs implemented
[    1.442482] GICv3: Distributor has no Range Selector support
[    1.442996] GICv3: 16 PPIs implemented
[    1.443373] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    1.444074] ITS [mem 0xfe640000-0xfe65ffff]
[    1.444493] ITS@0x00000000fe640000: allocated 8192 Devices @1f01e0000 (indirect, esz 8, psz 64K, shr 0)
[    1.445352] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @1f01f0000 (flat, esz 2, psz 64K, shr 0)
[    1.446288] ITS: using cache flushing for cmd queue
[    1.446750] ITS [mem 0xfe660000-0xfe67ffff]
[    1.447163] ITS@0x00000000fe660000: allocated 8192 Devices @1f0210000 (indirect, esz 8, psz 64K, shr 0)
[    1.448022] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @1f0220000 (flat, esz 2, psz 64K, shr 0)
[    1.448954] ITS: using cache flushing for cmd queue
[    1.449594] GICv3: using LPI property table @0x00000001f0230000
[    1.450232] GIC: using cache flushing for LPI property table
[    1.450744] GICv3: CPU0: using allocated LPI pending table @0x00000001f0240000
[    1.451434] rcu:     Offload RCU callbacks from CPUs: 0-7.
[    1.557934] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    1.558491] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    1.559469] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    1.561364] Console: colour dummy device 80x25
[    1.561794] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    1.562727] pid_max: default: 32768 minimum: 301
[    1.563232] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.563910] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.565766] rcu: Hierarchical SRCU implementation.
[    1.566902] Platform MSI: msi-controller@fe640000 domain created
[    1.567456] Platform MSI: msi-controller@fe660000 domain created
[    1.568343] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[    1.569102] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[    1.570038] EFI services will not be available.
[    1.570681] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
[    1.572197] Detected VIPT I-cache on CPU1
[    1.572221] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    1.572235] GICv3: CPU1: using allocated LPI pending table @0x00000001f0250000
[    1.572272] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    1.573423] Detected VIPT I-cache on CPU2
[    1.573442] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    1.573456] GICv3: CPU2: using allocated LPI pending table @0x00000001f0260000
[    1.573489] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    1.574629] Detected VIPT I-cache on CPU3
[    1.574645] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    1.574658] GICv3: CPU3: using allocated LPI pending table @0x00000001f0270000
[    1.574688] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    1.575868] CPU features: detected: Spectre-v4
[    1.575870] CPU features: detected: Spectre-BHB
[    1.575871] Detected PIPT I-cache on CPU4
[    1.575882] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    1.575890] GICv3: CPU4: using allocated LPI pending table @0x00000001f0280000
[    1.575910] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    1.577001] Detected PIPT I-cache on CPU5
[    1.577012] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    1.577020] GICv3: CPU5: using allocated LPI pending table @0x00000001f0290000
[    1.577041] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    1.578130] Detected PIPT I-cache on CPU6
[    1.578141] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    1.578149] GICv3: CPU6: using allocated LPI pending table @0x00000001f02a0000
[    1.578169] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    1.579274] Detected PIPT I-cache on CPU7
[    1.579285] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    1.579293] GICv3: CPU7: using allocated LPI pending table @0x00000001f02b0000
[    1.579314] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    1.579363] smp: Brought up 1 node, 8 CPUs
[    1.596201] SMP: Total of 8 processors activated.
[    1.596633] CPU features: detected: Privileged Access Never
[    1.597137] CPU features: detected: LSE atomic instructions
[    1.597641] CPU features: detected: User Access Override
[    1.598121] CPU features: detected: 32-bit EL0 Support
[    1.598587] CPU features: detected: Common not Private translations
[    1.599154] CPU features: detected: RAS Extension Support
[    1.599642] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    1.600425] CPU features: detected: CRC32 instructions
[    1.600890] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    1.601517] CPU features: detected: RCpc load-acquire (LDAPR)
[    1.625942] CPU: All CPU(s) started at EL2
[    1.627482] devtmpfs: initialized
[    1.637442] Registered cp15_barrier emulation handler
[    1.637903] Registered setend emulation handler
[    1.638364] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    1.639244] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    1.640777] pinctrl core: initialized pinctrl subsystem
[    1.641410] DMI not present or invalid.
[    1.641839] NET: Registered protocol family 16
[    1.642773] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    1.643462] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    1.644544] Registered FIQ tty driver
[    1.644962] thermal_sys: Registered thermal governor 'fair_share'
[    1.644963] thermal_sys: Registered thermal governor 'step_wise'
[    1.645512] thermal_sys: Registered thermal governor 'user_space'
[    1.646052] thermal_sys: Registered thermal governor 'power_allocator'
[    1.646709] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    1.648038] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    1.648773] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
[    1.649509] thermal thermal_zone4: power_allocator: sustainable_power will be estimated
[    1.650246] thermal thermal_zone5: power_allocator: sustainable_power will be estimated
[    1.650986] thermal thermal_zone6: power_allocator: sustainable_power will be estimated
[    1.651719] cpuidle: using governor menu
[    1.652148] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    1.652838] ASID allocator initialised with 65536 entries
[    1.654487] ramoops: dmesg-0    0x18000@0x0000000000110000
[    1.654959] ramoops: dmesg-1    0x18000@0x0000000000128000
[    1.655438] ramoops: console    0x80000@0x0000000000140000
[    1.655913] ramoops: pmsg    0x30000@0x00000000001c0000
[    1.656565] printk: console [ramoops-1] enabled
[    1.656973] pstore: Registered ramoops as persistent store backend
[    1.657530] ramoops: using 0xe0000@0x110000, ecc: 0
[    1.690466] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[    1.691193] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[    1.691901] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[    1.692635] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[    1.693370] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[    1.693989] rockchip-pinctrl pinctrl: probed pinctrl
[    1.705043] fiq_debugger fiq_debugger.0: IRQ fiq not found
[    1.705547] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    1.706067] fiq_debugger_probe: could not install nmi irq handler
[[    1.706650] printk: console [ttyFIQ0] enabled
    1.706650] printk: console [ttyFIQ0] enabled
[    1.707422] printk: bootconsole [uart8250] disabled
[    1.707422] printk: bootconsole [uart8250] disabled
[    1.707904] Registered fiq debugger ttyFIQ0
[    1.708110] vcc5v0_sys: supplied by vcc12v_dcin
[    1.708182] vcc5v0_usbdcin: supplied by vcc12v_dcin
[    1.708250] vcc5v0_usb: supplied by vcc5v0_usbdcin
[    1.708320] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
[    1.708457] vbus5v0_typec: supplied by vcc5v0_usb
[    1.708529] vcc3v3_pcie30: supplied by vcc12v_dcin
[    1.708603] vcc5v0_host: supplied by vcc5v0_usb
[    1.709130] iommu: Default domain type: Translated 
[    1.711750] SCSI subsystem initialized
[    1.711803] usbcore: registered new interface driver usbfs
[    1.711813] usbcore: registered new interface driver hub
[    1.711823] usbcore: registered new device driver usb
[    1.711848] mc: Linux media interface: v0.10
[    1.711854] videodev: Linux video capture interface: v2.00
[    1.711874] pps_core: LinuxPPS API ver. 1 registered
[    1.711876] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.711882] PTP clock support registered
[    1.711894] EDAC MC: Ver: 3.0.0
[    1.712123] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    1.712150] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    1.712945] Advanced Linux Sound Architecture Driver Initialized.
[    1.713072] Bluetooth: Core ver 2.22
[    1.713081] NET: Registered protocol family 31
[    1.713083] Bluetooth: HCI device and connection manager initialized
[    1.713087] Bluetooth: HCI socket layer initialized
[    1.713091] Bluetooth: L2CAP socket layer initialized
[    1.713100] Bluetooth: SCO socket layer initialized
[    1.714326] rockchip-cpuinfo cpuinfo: SoC        : 35881000
[    1.714330] rockchip-cpuinfo cpuinfo: Serial        : a8eef7e75df20ac0
[    1.714525] clocksource: Switched to clocksource arch_sys_counter
[    1.950757] NET: Registered protocol family 2
[    1.950828] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    1.951875] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.951912] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    1.952074] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    1.952392] TCP: Hash tables configured (established 32768 bind 32768)
[    1.952425] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.952485] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.952582] NET: Registered protocol family 1
[    1.952723] RPC: Registered named UNIX socket transport module.
[    1.952727] RPC: Registered udp transport module.
[    1.952730] RPC: Registered tcp transport module.
[    1.952732] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.952994] PCI: CLS 0 bytes, default 64
[    1.953575] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
[    1.953988] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
[    1.954529] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    1.956108] Initialise system trusted keyrings
[    1.956149] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[    1.957336] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.957486] NFS: Registering the id_resolver key type
[    1.957494] Key type id_resolver registered
[    1.957496] Key type id_legacy registered
[    1.957507] ntfs: driver 2.1.32 [Flags: R/O].
[    1.957562] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    1.957640] fuse: init (API version 7.32)
[    1.957712] SGI XFS with security attributes, no debug enabled
[    1.977486] NET: Registered protocol family 38
[    1.977495] Key type asymmetric registered
[    1.977498] Asymmetric key parser 'x509' registered
[    1.977508] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    1.977512] io scheduler mq-deadline registered
[    1.977515] io scheduler kyber registered
[    1.977852] rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully!
[    1.977913] rockchip-csi2-dphy-hw fedc8000.csi2-dphy1-hw: csi2 dphy hw probe successfully!
[    1.983851] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
[    1.984387] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success
[    1.986416] rk-pcie fe150000.pcie: invalid prsnt-gpios property in node
[    1.986520] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node
[    1.986542] rk-pcie fe170000.pcie: no vpcie3v3 regulator found
[    1.986576] pwm-backlight backlight: supply power not found, using dummy regulator
[    1.986796] iep: Module initialized.
[    1.986819] mpp_service mpp-srv: unknown mpp version for missing VCS info
[    1.986823] mpp_service mpp-srv: probe start
[    1.986826] rk-pcie fe170000.pcie: IRQ msi not found
[    1.986831] rk-pcie fe170000.pcie: use outband MSI support
[    1.986835] rk-pcie fe170000.pcie: Missing *config* reg space
[    1.986856] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:
[    1.986877] rk-pcie fe170000.pcie:      err 0x00f2000000..0x00f20fffff -> 0x00f2000000
[    1.986891] rk-pcie fe170000.pcie:       IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
[    1.986906] rk-pcie fe170000.pcie:      MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
[    1.986917] rk-pcie fe170000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[    1.986941] rk-pcie fe170000.pcie: Missing *config* reg space
[    1.986969] rk-pcie fe170000.pcie: invalid resource
[    1.987508] mpp_vdpu1 fdb51000.avsd-plus: Adding to iommu group 1
[    1.987675] mpp_vdpu1 fdb51000.avsd-plus: probe device
[    1.987751] mpp_vdpu1 fdb51000.avsd-plus: reset_group->rw_sem_on=0
[    1.987756] mpp_vdpu1 fdb51000.avsd-plus: reset_group->rw_sem_on=0
[    1.987829] mpp_vdpu1 fdb51000.avsd-plus: probing finish
[    1.988058] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
[    1.988089] mpp_vdpu2 fdb50400.vdpu: probe device
[    1.988143] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
[    1.988148] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
[    1.988210] mpp_vdpu2 fdb50400.vdpu: probing finish
[    1.988316] mpp_vepu2 jpege-ccu: probing start
[    1.988320] mpp_vepu2 jpege-ccu: probing finish
[    1.988390] mpp_vepu2 fdb50000.vepu: Adding to iommu group 1
[    1.988418] mpp_vepu2 fdb50000.vepu: probing start
[    1.988471] mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0
[    1.988474] mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0
[    1.988529] mpp_vepu2 fdb50000.vepu: probing finish
[    1.988582] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
[    1.988648] mpp_vepu2 fdba0000.jpege-core: probing start
[    1.988719] mpp_vepu2 fdba0000.jpege-core: attach ccu success
[    1.988773] mpp_vepu2 fdba0000.jpege-core: probing finish
[    1.988809] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
[    1.988874] mpp_vepu2 fdba4000.jpege-core: probing start
[    1.988936] mpp_vepu2 fdba4000.jpege-core: attach ccu success
[    1.988989] mpp_vepu2 fdba4000.jpege-core: probing finish
[    1.989033] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
[    1.989094] mpp_vepu2 fdba8000.jpege-core: probing start
[    1.989153] mpp_vepu2 fdba8000.jpege-core: attach ccu success
[    1.989204] mpp_vepu2 fdba8000.jpege-core: probing finish
[    1.989250] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
[    1.989310] mpp_vepu2 fdbac000.jpege-core: probing start
[    1.989369] mpp_vepu2 fdbac000.jpege-core: attach ccu success
[    1.989422] mpp_vepu2 fdbac000.jpege-core: probing finish
[    1.989596] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
[    1.989658] mpp-iep2 fdbb0000.iep: probe device
[    1.989737] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[    1.989782] mpp-iep2 fdbb0000.iep: probing finish
[    1.989908] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
[    1.990028] mpp_jpgdec fdb90000.jpegd: probe device
[    1.990149] mpp_jpgdec fdb90000.jpegd: probing finish
[    1.990427] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
[    1.990465] mpp_rkvdec2 fdc30000.rkvdec-ccu: ccu-mode: 1
[    1.990468] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
[    1.990531] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
[    1.990730] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
[    1.990805] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[    1.990809] rkvdec2_init:1022: No niu aclk reset resource define
[    1.990812] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[    1.990815] rkvdec2_init:1025: No niu hclk reset resource define
[    1.990830] mpp_rkvdec2 fdc38100.rkvdec-core: no regulator, devfreq is disabled
[    1.990872] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
[    1.990875] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
[    1.991003] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000
[    1.991006] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000
[    1.991009] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
[    1.991012] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
[    1.991016] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
[    1.991020] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_info_count 20
[    1.991023] mpp_rkvdec2 fdc38100.rkvdec-core: [136, 24576]
[    1.991026] mpp_rkvdec2 fdc38100.rkvdec-core: [137, 49152]
[    1.991029] mpp_rkvdec2 fdc38100.rkvdec-core: [141, 90112]
[    1.991032] mpp_rkvdec2 fdc38100.rkvdec-core: [140, 49152]
[    1.991035] mpp_rkvdec2 fdc38100.rkvdec-core: [139, 180224]
[    1.991038] mpp_rkvdec2 fdc38100.rkvdec-core: [133, 49152]
[    1.991041] mpp_rkvdec2 fdc38100.rkvdec-core: [134, 8192]
[    1.991043] mpp_rkvdec2 fdc38100.rkvdec-core: [135, 4352]
[    1.991046] mpp_rkvdec2 fdc38100.rkvdec-core: [138, 13056]
[    1.991049] mpp_rkvdec2 fdc38100.rkvdec-core: [142, 291584]
[    1.991070] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
[    1.991120] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
[    1.991312] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
[    1.991386] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[    1.991390] rkvdec2_init:1022: No niu aclk reset resource define
[    1.991393] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[    1.991396] rkvdec2_init:1025: No niu hclk reset resource define
[    1.991408] mpp_rkvdec2 fdc48100.rkvdec-core: no regulator, devfreq is disabled
[    1.991438] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
[    1.991454] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
[    1.991600] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000
[    1.991603] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000
[    1.991606] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
[    1.991609] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
[    1.991613] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
[    1.991616] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_info_count 20
[    1.991619] mpp_rkvdec2 fdc48100.rkvdec-core: [136, 24576]
[    1.991622] mpp_rkvdec2 fdc48100.rkvdec-core: [137, 49152]
[    1.991625] mpp_rkvdec2 fdc48100.rkvdec-core: [141, 90112]
[    1.991628] mpp_rkvdec2 fdc48100.rkvdec-core: [140, 49152]
[    1.991631] mpp_rkvdec2 fdc48100.rkvdec-core: [139, 180224]
[    1.991634] mpp_rkvdec2 fdc48100.rkvdec-core: [133, 49152]
[    1.991636] mpp_rkvdec2 fdc48100.rkvdec-core: [134, 8192]
[    1.991639] mpp_rkvdec2 fdc48100.rkvdec-core: [135, 4352]
[    1.991642] mpp_rkvdec2 fdc48100.rkvdec-core: [138, 13056]
[    1.991645] mpp_rkvdec2 fdc48100.rkvdec-core: [142, 291584]
[    1.991663] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
[    1.991862] mpp_rkvenc2 rkvenc-ccu: probing start
[    1.991866] mpp_rkvenc2 rkvenc-ccu: probing finish
[    1.992281] mpp_av1dec: Adding child /av1d@fdc70000
[    1.992437] mpp_av1dec: register device av1d-master
[    1.992448] mpp_av1dec av1d-master: av1_iommu_of_xlate,784
[    1.992461] av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu
[    1.992466] mpp_av1dec av1d-master: Adding to iommu group 17
[    1.992648] mpp_av1dec av1d-master: probing start
[    1.992785] mpp_av1dec av1d-master: probing finish
[    1.992805] mpp_service mpp-srv: probe success
[    1.999667] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.999674] dma-pl330 fea10000.dma-controller:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.000195] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.000201] dma-pl330 fea30000.dma-controller:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.000742] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.000747] dma-pl330 fed10000.dma-controller:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.001183] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
[    2.001228] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
[    2.001262] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
[    2.001293] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
[    2.001323] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
[    2.001705] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    2.002255] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    2.002603] febc0000.serial: ttyS9 at MMIO 0xfebc0000 (irq = 105, base_baud = 1500000) is a 16550A
[    2.002976] rk-pcie fe150000.pcie: IRQ msi not found
[    2.002988] rk-pcie fe150000.pcie: use outband MSI support
[    2.002997] rk-pcie fe150000.pcie: Missing *config* reg space
[    2.003016] rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges:
[    2.003068] rk-pcie fe150000.pcie:      err 0x00f0000000..0x00f00fffff -> 0x00f0000000
[    2.003107] rk-pcie fe150000.pcie:       IO 0x00f0100000..0x00f01fffff -> 0x00f0100000
[    2.003145] rk-pcie fe150000.pcie:      MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000
[    2.003168] rk-pcie fe150000.pcie:      MEM 0x0900000000..0x093fffffff -> 0x0900000000
[    2.003197] rk-pcie fe150000.pcie: Missing *config* reg space
[    2.003228] rk-pcie fe150000.pcie: invalid resource
[    2.004062] rockchip-vop2 fdd90000.vop: Adding to iommu group 16
[    2.010659] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[    2.010667] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[    2.010673] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[    2.010679] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[    2.010842] [drm] failed to init overlay plane Cluster0-win1
[    2.010865] [drm] failed to init overlay plane Cluster1-win1
[    2.010887] [drm] failed to init overlay plane Cluster2-win1
[    2.010910] [drm] failed to init overlay plane Cluster3-win1
[    2.018264] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc00935e230)
[    2.018585] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[    2.018855] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc00936cdc0)
[    2.019214] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver
[    2.019471] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc00936cdc0)
[    2.019505] dw-mipi-dsi2 fde20000.dsi: [drm:dw_mipi_dsi2_bind] *ERROR* Failed to find panel or bridge: -517
[    2.025506] brd: module loaded
[    2.027426] loop: module loaded
[    2.027533] zram: Added device: zram0
[    2.027619] lkdtm: No crash points registered, enable through debugfs
[    2.027918] system_heap: orders[0] = 6
[    2.027922] system_heap: orders[1] = 4
[    2.027925] system_heap: orders[2] = 0
[    2.028581] ahci fe210000.sata: supply ahci not found, using dummy regulator
[    2.028627] ahci fe210000.sata: supply phy not found, using dummy regulator
[    2.028666] ahci fe210000.sata: supply target not found, using dummy regulator
[    2.028718] ahci fe210000.sata: forcing port_map 0x0 -> 0x1
[    2.028736] ahci fe210000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    2.028742] ahci fe210000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst 
[    2.028749] ahci fe210000.sata: port 0 can do FBS, forcing FBSCP
[    2.029096] scsi host0: ahci
[    2.029182] ata1: SATA max UDMA/133 mmio [mem 0xfe210000-0xfe210fff] port 0x100 irq 90
[    2.030009] rockchip-spi feb20000.spi: no high_speed pinctrl state
[    2.030961] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
[    2.031138] rk806 spi2.0: ON: 0x40 OFF:0x0
[    2.032510] vdd_gpu_s0: supplied by vcc5v0_sys
[    2.033457] vdd_cpu_lit_s0: supplied by vcc5v0_sys
[    2.033995] vdd_log_s0: supplied by vcc5v0_sys
[    2.034475] vdd_vdenc_s0: supplied by vcc5v0_sys
[    2.035009] vdd_ddr_s0: supplied by vcc5v0_sys
[    2.035315] vdd2_ddr_s3: supplied by vcc5v0_sys
[    2.035795] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
[    2.036225] vcc_3v3_s3: supplied by vcc5v0_sys
[    2.036633] vddq_ddr_s0: supplied by vcc5v0_sys
[    2.037112] vcc_1v8_s3: supplied by vcc5v0_sys
[    2.037617] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
[    2.038121] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
[    2.038543] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    2.038963] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
[    2.039379] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    2.039882] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    2.040455] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    2.040967] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
[    2.041483] vcc_3v3_s0: supplied by vcc5v0_sys
[    2.041904] vccio_sd_s0: supplied by vcc5v0_sys
[    2.042330] pldo6_s3: supplied by vcc5v0_sys
[    2.042517] rk806 spi2.0: no sleep-setting state
[    2.042521] rk806 spi2.0: no reset-setting pinctrl state
[    2.042525] rk806 spi2.0: no dvs-setting pinctrl state
[    2.043746] rockchip-spi feb20000.spi: probed, poll=0, rsd=0, cs-inactive=0, ready=0
[    2.044977] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found
[    2.045096] rk_gmac-dwmac fe1c0000.ethernet: supply phy not found, using dummy regulator
[    2.045136] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (output).
[    2.045141] rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x43).
[    2.045145] rk_gmac-dwmac fe1c0000.ethernet: Can not read property: rx_delay.
[    2.045149] rk_gmac-dwmac fe1c0000.ethernet: set rx_delay to 0xffffffff
[    2.045162] rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).
[    2.045169] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_rx
[    2.045173] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_tx
[    2.045183] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock clk_mac_speed
[    2.045399] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID
[    2.045462] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    2.045467] rk_gmac-dwmac fe1c0000.ethernet:     DWMAC4/5
[    2.045472] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported
[    2.045475] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported
[    2.045479] rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported
[    2.045482] rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported
[    2.045503] rk_gmac-dwmac fe1c0000.ethernet: TSO supported
[    2.045507] rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.045511] rk_gmac-dwmac fe1c0000.ethernet: Enabled Flow TC (entries=2)
[    2.045515] rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled
[    2.045519] rk_gmac-dwmac fe1c0000.ethernet: Using 32 bits DMA width
[    2.178079] mdio_bus stmmac-1: MDIO device at address 1 is missing.
[    2.178786] usbcore: registered new interface driver rtl8150
[    2.178803] usbcore: registered new interface driver r8152
[    2.190330] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.190339] ehci-pci: EHCI PCI platform driver
[    2.190358] ehci-platform: EHCI generic platform driver
[    2.192332] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.192507] ehci-platform fc800000.usb: EHCI Host Controller
[    2.192558] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1
[    2.192604] ehci-platform fc800000.usb: irq 20, io mem 0xfc800000
[    2.204541] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[    2.204597] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.204602] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.204606] usb usb1: Product: EHCI Host Controller
[    2.204609] usb usb1: Manufacturer: Linux 5.10.198 ehci_hcd
[    2.204613] usb usb1: SerialNumber: fc800000.usb
[    2.204753] hub 1-0:1.0: USB hub found
[    2.204765] hub 1-0:1.0: 1 port detected
[    2.207007] ehci-platform fc880000.usb: EHCI Host Controller
[    2.207054] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
[    2.207096] ehci-platform fc880000.usb: irq 22, io mem 0xfc880000
[    2.209010] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    2.217867] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
[    2.217881] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.217918] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.217923] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.217927] usb usb2: Product: EHCI Host Controller
[    2.217930] usb usb2: Manufacturer: Linux 5.10.198 ehci_hcd
[    2.217934] usb usb2: SerialNumber: fc880000.usb
[    2.218053] hub 2-0:1.0: USB hub found
[    2.218062] hub 2-0:1.0: 1 port detected
[    2.218317] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.218325] ohci-platform: OHCI generic platform driver
[    2.218426] ohci-platform fc840000.usb: Generic Platform OHCI controller
[    2.218473] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
[    2.218505] ohci-platform fc840000.usb: irq 21, io mem 0xfc840000
[    2.234557] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x1
[    2.244549] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.261219] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    2.271215] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.278582] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.278589] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.278593] usb usb3: Product: Generic Platform OHCI controller
[    2.278597] usb usb3: Manufacturer: Linux 5.10.198 ohci_hcd
[    2.278600] usb usb3: SerialNumber: fc840000.usb
[    2.278714] hub 3-0:1.0: USB hub found
[    2.278724] hub 3-0:1.0: 1 port detected
[    2.278890] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
[    2.278934] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4
[    2.278964] ohci-platform fc8c0000.usb: irq 23, io mem 0xfc8c0000
[    2.287883] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    2.297879] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.314545] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    2.338582] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.338589] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.338592] usb usb4: Product: Generic Platform OHCI controller
[    2.338596] usb usb4: Manufacturer: Linux 5.10.198 ohci_hcd
[    2.338599] usb usb4: SerialNumber: fc8c0000.usb
[    2.338712] hub 4-0:1.0: USB hub found
[    2.338723] hub 4-0:1.0: 1 port detected
[    2.339101] phy phy-fd5d4000.syscon:usb2-phy@4000.3: illegal mode
[    2.339108] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    2.339154] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
[    2.339231] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000800002010010
[    2.339247] xhci-hcd xhci-hcd.5.auto: irq 149, io mem 0xfc400000
[    2.339299] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    2.339341] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
[    2.339347] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
[    2.339382] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.339386] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.339390] usb usb5: Product: xHCI Host Controller
[    2.339393] usb usb5: Manufacturer: Linux 5.10.198 xhci-hcd
[    2.339397] usb usb5: SerialNumber: xhci-hcd.5.auto
[    2.339513] hub 5-0:1.0: USB hub found
[    2.339523] hub 5-0:1.0: 1 port detected
[    2.339615] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.339643] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    2.339647] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.339651] usb usb6: Product: xHCI Host Controller
[    2.339654] usb usb6: Manufacturer: Linux 5.10.198 xhci-hcd
[    2.339658] usb usb6: SerialNumber: xhci-hcd.5.auto
[    2.339766] hub 6-0:1.0: USB hub found
[    2.339775] hub 6-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    2.339857] usbcore: registered new interface driver cdc_acm
[    2.339860] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.339923] usbcore: registered new interface driver uas
[    2.339958] usbcore: registered new interface driver usb-storage
[    2.339983] usbcore: registered new interface driver usbserial_generic
[    2.339991] usbserial: USB Serial support registered for generic
[    2.340002] usbcore: registered new interface driver cp210x
[    2.340009] usbserial: USB Serial support registered for cp210x
[    2.340031] usbcore: registered new interface driver ftdi_sio
[    2.340037] usbserial: USB Serial support registered for FTDI USB Serial Device
[    2.340090] usbcore: registered new interface driver keyspan
[    2.340097] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    2.340104] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    2.340110] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    2.340116] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    2.340129] usbcore: registered new interface driver option
[    2.340136] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.340216] usbcore: registered new interface driver oti6858
[    2.340222] usbserial: USB Serial support registered for oti6858
[    2.340234] usbcore: registered new interface driver pl2303
[    2.340240] usbserial: USB Serial support registered for pl2303
[    2.340255] usbcore: registered new interface driver qcserial
[    2.340261] usbserial: USB Serial support registered for Qualcomm USB modem
[    2.340279] usbcore: registered new interface driver sierra
[    2.340286] usbserial: USB Serial support registered for Sierra USB modem
[    2.340633] usbcore: registered new interface driver usbtouchscreen
[    2.340852] ata1: SATA link down (SStatus 0 SControl 300)
[    2.341452] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.3.auto/input/input0
[    2.341615] i2c /dev entries driver
[    2.344951] vdd_cpu_big0_s0: supplied by vcc5v0_sys
[    2.353316] vdd_cpu_big1_s0: supplied by vcc5v0_sys
[    2.362029] vdd_npu_s0: supplied by vcc5v0_sys
[    2.368309] i2c i2c-4: 1 i2c clients have been registered at 0x68
[    2.369964] husb311 6-004e: vid is not correct, 0x0000
[    2.369969] husb311 6-004e: check vid/pid fail(-19)
[    2.372171] rtc-hym8563 6-0051: rtc information is valid
[    2.376418] rtc-hym8563 6-0051: registered as rtc0
[    2.377601] rtc-hym8563 6-0051: hctosys: unable to read the hardware clock
[    2.380231] ircut cam_ircut: driver version: 00.01.00
[    2.380288] ircut cam_ircut: failed get pulse-width,use dafult value 100
[    2.380331] ircut cam_ircut: Failed to get ircut-open-gpios
[    2.380339] ircut cam_ircut: Failed to get ircut-close-gpios
[    2.380351] ircut cam_ircut: probe successful!
[    2.380734] rkcifhw fdce0000.rkcif: Adding to iommu group 15
[    2.381526] rkcifhw fdce0000.rkcif: No reserved memory region assign to CIF
[    2.381585] rkcif rkcif-mipi-lvds2: Adding to iommu group 15
[    2.381597] rkcif rkcif-mipi-lvds2: rkcif driver version: v00.02.00
[    2.381635] rkcif rkcif-mipi-lvds2: attach to cif hw node
[    2.381639] rkcif rkcif-mipi-lvds2: rkcif wait line 0
[    2.381644] : terminal subdev does not exist
[    2.381648] : terminal subdev does not exist
[    2.381651] : terminal subdev does not exist
[    2.381654] : terminal subdev does not exist
[    2.381658] : get_remote_sensor: video pad[0] is null
[    2.381662] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    2.381666] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[    2.381670] : get_remote_sensor: video pad[0] is null
[    2.381672] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    2.381676] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[    2.381679] : get_remote_sensor: video pad[0] is null
[    2.381682] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    2.381685] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[    2.381688] : get_remote_sensor: video pad[0] is null
[    2.381691] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    2.381694] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[    2.382140] rkcif rkcif-mipi-lvds2: No memory-region-thunderboot specified
[    2.382746] rockchip-mipi-csi2-hw fdd10000.mipi0-csi2-hw: enter mipi csi2 hw probe!
[    2.382801] rockchip-mipi-csi2-hw fdd10000.mipi0-csi2-hw: probe success, v4l2_dev:mipi0-csi2-hw!
[    2.382825] rockchip-mipi-csi2-hw fdd20000.mipi1-csi2-hw: enter mipi csi2 hw probe!
[    2.382860] rockchip-mipi-csi2-hw fdd20000.mipi1-csi2-hw: probe success, v4l2_dev:mipi1-csi2-hw!
[    2.382880] rockchip-mipi-csi2-hw fdd30000.mipi2-csi2-hw: enter mipi csi2 hw probe!
[    2.382915] rockchip-mipi-csi2-hw fdd30000.mipi2-csi2-hw: probe success, v4l2_dev:mipi2-csi2-hw!
[    2.382935] rockchip-mipi-csi2-hw fdd40000.mipi3-csi2-hw: enter mipi csi2 hw probe!
[    2.382968] rockchip-mipi-csi2-hw fdd40000.mipi3-csi2-hw: probe success, v4l2_dev:mipi3-csi2-hw!
[    2.382988] rockchip-mipi-csi2-hw fdd50000.mipi4-csi2-hw: enter mipi csi2 hw probe!
[    2.383021] rockchip-mipi-csi2-hw fdd50000.mipi4-csi2-hw: probe success, v4l2_dev:mipi4-csi2-hw!
[    2.383041] rockchip-mipi-csi2-hw fdd60000.mipi5-csi2-hw: enter mipi csi2 hw probe!
[    2.383073] rockchip-mipi-csi2-hw fdd60000.mipi5-csi2-hw: probe success, v4l2_dev:mipi5-csi2-hw!
[    2.383393] rockchip-mipi-csi2 mipi2-csi2: attach to csi2 hw node
[    2.383410] rkcif rkcif-mipi-lvds2: Entity type for entity rockchip-mipi-csi2 was not initialized!
[    2.383415] rockchip-mipi-csi2: Async registered subdev
[    2.383419] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds2!
[    2.384038] rkisp_hw fdcb0000.rkisp: Adding to iommu group 14
[    2.384171] rkisp_hw fdcb0000.rkisp: is_thunderboot: 0
[    2.384176] rkisp_hw fdcb0000.rkisp: Missing rockchip,grf property
[    2.384188] rkisp_hw fdcb0000.rkisp: max input:0x0@0fps
[    2.384240] rkisp_hw fdcb0000.rkisp: no find phandle sram
[    2.384424] rkisp rkisp0-vir0: rkisp driver version: v02.04.00
[    2.384478] rkisp rkisp0-vir0: No memory-region-thunderboot specified
[    2.384529] rkisp rkisp0-vir0: Entity type for entity rkisp-isp-subdev was not initialized!
[    2.385543] rk_hdmirx fdee0000.hdmirx-controller: No reserved memory for HDMIRX, use default CMA
[    2.385563] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_probe: cpu_aff:0x500, Bound_cpu:5, wdt_cfg_bound_cpu:6, phy_cpuid:5
[    2.386043] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_interrupts_setup: 0
[    2.386570] rk_hdmirx fdee0000.hdmirx-controller: rk_hdmirx_hdcp_register success
[    2.386587] rk_hdmirx fdee0000.hdmirx-controller: fdee0000.hdmirx-controller driver probe ok!
[    2.386662] usbcore: registered new interface driver uvcvideo
[    2.386665] USB Video Class driver (1.1.1)
[    2.387249] Bluetooth: HCI UART driver ver 2.3
[    2.387254] Bluetooth: HCI UART protocol H4 registered
[    2.387258] Bluetooth: HCI UART protocol ATH3K registered
[    2.387276] usbcore: registered new interface driver bfusb
[    2.387291] usbcore: registered new interface driver btusb
[    2.387976] cpu cpu0: bin=0
[    2.388188] cpu cpu0: leakage=15
[    2.389583] cpu cpu0: pvtm=1479
[    2.389695] cpu cpu0: pvtm-volt-sel=3
[    2.391548] cpu cpu4: bin=0
[    2.391755] cpu cpu4: leakage=13
[    2.398183] cpu cpu4: pvtm=1715
[    2.402081] cpu cpu4: pvtm-volt-sel=5
[    2.404679] cpu cpu6: bin=0
[    2.404887] cpu cpu6: leakage=13
[    2.411328] cpu cpu6: pvtm=1734
[    2.415240] cpu cpu6: pvtm-volt-sel=5
[    2.416934] cpu cpu0: avs=0
[    2.417898] cpu cpu4: avs=0
[    2.418705] cpu cpu6: avs=0
[    2.418878] cpu cpu0: EM: created perf domain
[    2.418905] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
[    2.419383] cpu cpu4: EM: created perf domain
[    2.419405] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    2.427592] cpu cpu6: EM: created perf domain
[    2.427963] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    2.438207] sdhci: Secure Digital Host Controller Interface driver
[    2.438233] sdhci: Copyright(c) Pierre Ossman
[    2.438238] Synopsys Designware Multimedia Card Interface Driver
[    2.438871] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.439282] dwmmc_rockchip fe2c0000.mmc: No normal pinctrl state
[    2.439290] dwmmc_rockchip fe2c0000.mmc: No idle pinctrl state
[    2.439412] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[    2.439442] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[    2.439452] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[    2.439486] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 91,32 bit host data width,256 deep fifo
[    2.439656] dwmmc_rockchip fe2d0000.mmc: No normal pinctrl state
[    2.439665] dwmmc_rockchip fe2d0000.mmc: No idle pinctrl state
[    2.439760] dwmmc_rockchip fe2d0000.mmc: IDMAC supports 32-bit address mode.
[    2.439776] dwmmc_rockchip fe2d0000.mmc: Using internal DMA controller.
[    2.439784] dwmmc_rockchip fe2d0000.mmc: Version ID is 270a
[    2.439809] dwmmc_rockchip fe2d0000.mmc: DW MMC controller at irq 92,32 bit host data width,256 deep fifo
[    2.440273] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    2.440353] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    2.440838] dwmmc_rockchip fe2d0000.mmc: allocated mmc-pwrseq
[    2.440850] mmc_host mmc2: card is non-removable.
[    2.441024] dwmmc_rockchip fe2c0000.mmc: Failed getting OCR mask: -22
[    2.441431] cryptodev: driver 1.12 loaded.
[    2.441471] hid: raw HID events driver (C) Jiri Kosina
[    2.441644] usbcore: registered new interface driver usbhid
[    2.441649] usbhid: USB HID core driver
[    2.443481] dwmmc_rockchip fe2c0000.mmc: could not set regulator OCR (-22)
[    2.443490] dwmmc_rockchip fe2c0000.mmc: failed to enable vmmc regulator
[    2.459570] optee: probing for conduit method.
[    2.459598] optee: revision 3.13 (62aa10b7)
[    2.459866] optee: dynamic shared memory is enabled
[    2.460000] optee: initialized driver
[    2.460701] usbcore: registered new interface driver snd-usb-audio
[    2.461849] ES8323 7-0011: i2c recv Failed
[    2.464552] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.464600] rockchip-i2s-tdm fddf0000.i2s: CLK-ALWAYS-ON: mclk: 12288000, bclk: 3072000, fsync: 48000
[    2.467382] rockchip-i2s-tdm fddf4000.i2s: CLK-ALWAYS-ON: mclk: 12288000, bclk: 3072000, fsync: 48000
[    2.468403] debugfs: File 'Capture' in directory 'dapm' already present!
[    2.470418] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
[    2.480574] input: rockchip,hdmiin rockchip,hdmiin as /devices/platform/hdmiin-sound/sound/card0/input1
[    2.481567] Initializing XFRM netlink socket
[    2.481745] NET: Registered protocol family 10
[    2.482267] Segment Routing with IPv6
[    2.482301] NET: Registered protocol family 17
[    2.482311] NET: Registered protocol family 15
[    2.482529] Bluetooth: RFCOMM socket layer initialized
[    2.482541] Bluetooth: RFCOMM ver 1.11
[    2.482548] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.482554] Bluetooth: HIDP socket layer initialized
[    2.482577] [BT_RFKILL]: Enter rfkill_rk_init
[    2.482581] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    2.482820] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    2.482836] [WLAN_RFKILL]: can't find rockchip,grf property
[    2.482840] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6398s
[    2.482844] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    2.482847] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    2.482860] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,poweren_gpio = 20 flags = 0.
[    2.482873] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 10, flags = 0.
[    2.482879] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    2.482882] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    2.482886] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[    2.482890] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    2.483348] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 148.
[    2.483362] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 22.
[    2.483369] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 21.
[    2.483376] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 0.
[    2.483402] [BT_RFKILL]: Request irq for bt wakeup host
[    2.483442] [BT_RFKILL]: ** disable irq
[    2.483480] [BT_RFKILL]: bt_default device registered.
[    2.483518] Key type dns_resolver registered
[    2.484071] imx415 3-001a: driver version: 00.01.08
[    2.484081] imx415 3-001a:  Get hdr mode failed! no hdr default
[    2.484090] imx415 3-001a: detect imx415 lane 4
[    2.484106] imx415 3-001a: Failed to get reset-gpios
[    2.484116] imx415 3-001a: Failed to get power-gpios
[    2.484121] imx415 3-001a: could not get default pinstate
[    2.484125] imx415 3-001a: could not get sleep pinstate
[    2.484143] imx415 3-001a: supply dvdd not found, using dummy regulator
[    2.484194] imx415 3-001a: supply dovdd not found, using dummy regulator
[    2.509214] mmc0: Host Software Queue enabled
[    2.509290] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    2.509770] mmcblk0: mmc0:0001 A3A55B 28.9 GiB 
[    2.509936] mmcblk0boot0: mmc0:0001 A3A55B partition 1 4.00 MiB
[    2.510086] mmcblk0boot1: mmc0:0001 A3A55B partition 2 4.00 MiB
[    2.510205] mmcblk0rpmb: mmc0:0001 A3A55B partition 3 16.0 MiB, chardev (236:0)
[    2.513359]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    2.555286] imx415 3-001a: Unexpected sensor id(000000), ret(-5)
[    2.556297] Loading compiled-in X.509 certificates
[    2.557280] pstore: Using crash dump compression: deflate
[    2.557671] rga3_core0 fdb60000.rga: Adding to iommu group 2
[    2.557935] rga: rga3_core0, irq = 36, match scheduler
[    2.558900] rga: rga3_core0 hardware loaded successfully, hw_version:3.0.76831.
[    2.558944] rga: rga3_core0 probe successfully
[    2.559805] rga3_core1 fdb70000.rga: Adding to iommu group 3
[    2.560140] rga: rga3_core1, irq = 37, match scheduler
[    2.560709] rga: rga3_core1 hardware loaded successfully, hw_version:3.0.76831.
[    2.560747] rga: rga3_core1 probe successfully
[    2.561462] rga: rga2, irq = 38, match scheduler
[    2.562069] rga: rga2 hardware loaded successfully, hw_version:3.2.63318.
[    2.562094] rga: rga2 probe successfully
[    2.562563] rga_iommu: IOMMU binding successfully, default mapping core[0x1]
[    2.562998] rga: Module initialized. v1.3.1
[    2.585466] mali fb000000.gpu: Kernel DDK version g18p0-01eac0
[    2.586114] mali fb000000.gpu: bin=0
[    2.586337] mali fb000000.gpu: leakage=21
[    2.586370] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
[    2.587813] mali fb000000.gpu: pvtm=874
[    2.588063] mali fb000000.gpu: pvtm-volt-sel=3
[    2.589124] mali fb000000.gpu: avs=0
[    2.589169] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 143; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[    2.589534] mali fb000000.gpu: r0p0 status 5 not found in HW issues table;
[    2.589542] mali fb000000.gpu: falling back to closest match: r0p0 status 0
[    2.589547] mali fb000000.gpu: Execution proceeding normally with fallback match
[    2.589553] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
[    2.589590] mali fb000000.gpu: No priority control manager is configured
[    2.589765] mali fb000000.gpu: No memory group manager is configured
[    2.589784] mali fb000000.gpu: Protected memory allocator not available
[    2.590395] mali fb000000.gpu: Capping CSF_FIRMWARE_TIMEOUT to CSF_FIRMWARE_PING_TIMEOUT
[    2.590801] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[    2.591686] mali fb000000.gpu: Probed as mali0
[    2.592830] vendor storage:20190527 ret = 0
[    2.654931] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.667876] pcie20_avdd0v85: supplied by vdd_0v85_s0
[    2.669093] pcie20_avdd1v8: supplied by avcc_1v8_s0
[    2.669513] pcie30_avdd0v75: supplied by avdd_0v75_s0
[    2.669907] pcie30_avdd1v8: supplied by avcc_1v8_s0
[    2.670360] vcc3v3_lcd0_n: supplied by vcc_1v8_s0
[    2.671127] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
[    2.671404] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
[    2.672375] mpp_rkvenc2 fdbd0000.rkvenc-core: bin=0
[    2.672610] mpp_rkvenc2 fdbd0000.rkvenc-core: leakage=18
[    2.672620] mpp_rkvenc2 fdbd0000.rkvenc-core: leakage-volt-sel=1
[    2.673221] mpp_rkvenc2 fdbd0000.rkvenc-core: avs=0
[    2.673239] mpp_rkvenc2 fdbd0000.rkvenc-core: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[    2.673824] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
[    2.674232] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
[    2.674378] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
[    2.674630] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
[    2.679721] mpp_rkvenc2 fdbe0000.rkvenc-core: bin=0
[    2.680107] mpp_rkvenc2 fdbe0000.rkvenc-core: leakage=18
[    2.680143] mpp_rkvenc2 fdbe0000.rkvenc-core: leakage-volt-sel=1
[    2.680993] mpp_rkvenc2 fdbe0000.rkvenc-core: avs=0
[    2.681055] mpp_rkvenc2 fdbe0000.rkvenc-core: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[    2.683272] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
[    2.683436] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
[    2.684378] rockchip-dmc dmc: bin=0
[    2.684550] rockchip-dmc dmc: leakage=44
[    2.684560] rockchip-dmc dmc: leakage-volt-sel=1
[    2.684570] rockchip-dmc dmc: soc version=0, speed=1
[    2.685316] rockchip-dmc dmc: avs=0
[    2.685325] rockchip-dmc dmc: current ATF version 0x100
[    2.685390] rockchip-dmc dmc: normal_rate = 1560000000
[    2.685396] rock[chip-dmc dmc: reboot_rate = 2112000000
[    2.685401] rockchip-dmc dmc: suspend_rate = 528000000
[    2.685406] rockchip-dmc dmc: video_4k_rate = 1560000000
[    2.685411] rockchip-dmc dmc: video_4k_10b_rate = 1560000000
[    2.685416] rockchip-dmc dmc: video_svep_rate = 1560000000
[    2.685421] rockchip-dmc dmc: boost_rate = 2112000000
[    2.685425] rockchip-dmc dmc: fixed_rate(isp|cif0|cif1|dualview) = 2112000000
[    2.685430] rockchip-dmc dmc: performance_rate = 211200d0d000
[    2.685435] rockchip-dmc dmc: hdmirx_rate = 2112000000
[    2.685440] rockchip-dmc dmc: deep_suspend_rate = 2112000000
[    2.685446] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
[    2.685451] rockchip-dmc dmc: failed to get vop pn to msch rl
[    2.685526] rockchip-dmc dmc: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.686945] rockchip-dmc dmc: could not find power_model node
r_m0]E: waiting_vop_line_flag-1958: vop_post=0 unsupported!
[    2.697079] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully!
[    2.706014] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[    2.706043] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[    2.706055] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[    2.706065] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[    2.706433] [drm] failed to init overlay plane Cluster0-win1
[    2.706479] [drm] failed to init overlay plane Cluster1-win1
[    2.706525] [drm] failed to init overlay plane Cluster2-win1
[    2.706571] [drm] failed to init overlay plane Cluster3-win1
[    2.727283] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc00935e230)
[    2.728500] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[    2.729752] dw-hdmi-qp-hdcp dw-hdmi-qp-hdcp.10.auto: dw_hdcp_qp_hdcp_probe success
[    2.729854] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc00936cdc0)
[    2.730952] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver
[    2.732088] dw-hdmi-qp-hdcp dw-hdmi-qp-hdcp.13.auto: dw_hdcp_qp_hdcp_probe success
[    2.732168] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc00936cdc0)
[    2.732200] dw-mipi-dsi2 fde20000.dsi: [drm:dw_mipi_dsi2_bind] *ERROR* Failed to find panel or bridge: -517
[    2.739808] input: adc-keys as /devices/platform/adc-keys/input/input2
[    2.740260] <<GTP-INF>>[gt1x_ts_probe:560] GTP Driver Version: V1.4<2015/07/10>
[    2.740268] <<GTP-INF>>[gt1x_ts_probe:561] GTP I2C Address: 0x14
[    2.742703] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[    2.742710] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[    2.742715] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[    2.742720] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[    2.742855] [drm] failed to init overlay plane Cluster0-win1
[    2.742874] [drm] failed to init overlay plane Cluster1-win1
[    2.742890] [drm] failed to init overlay plane Cluster2-win1
[    2.742905] [drm] failed to init overlay plane Cluster3-win1
[    2.745277] <<GTP-ERR>>[gt1x_parse_dt:341] vdd_ana not specified, fallback to power-supply
[    2.748681] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc00935e230)
[    2.749545] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[    2.750420] dw-hdmi-qp-hdcp dw-hdmi-qp-hdcp.10.auto: dw_hdcp_qp_hdcp_probe success
[    2.750458] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc00936cdc0)
[    2.751011] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver
[    2.751881] dw-hdmi-qp-hdcp dw-hdmi-qp-hdcp.13.auto: dw_hdcp_qp_hdcp_probe success
[    2.751911] <<GTP-INF>>[gt1x_parse_dt:348] Power Invert,no 
[    2.751938] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc00936cdc0)
[    2.751982] rockchip-drm display-subsystem: bound fde20000.dsi (ops 0xffffffc00936f5d8)
[    2.752034] rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffffffc00936f968)
[    2.752078] rockchip-drm display-subsystem: bound fde60000.dp (ops 0xffffffc00936f968)
[    2.756330] <<GTP-INF>>[gt1x_reset_guitar:788] GTP RESET!
[    2.756575] rockchip-drm display-subsystem: route-hdmi0: failed to get logo,offset
[    2.757123] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    2.757234] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    2.757350] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    2.757466] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    2.757584] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    2.858035] dwhdmi-rockchip fdea0000.hdmi: i2c read time out!
[    2.858052] dwhdmi-rockchip fdea0000.hdmi: get hdcp2.x capable failed:-11
[    2.858064] dwhdmi-rockchip fdea0000.hdmi: faile[d to get edid
ddr_m0]E: waiting_vop_line_flag-1958: vop_post=0 unsupported!
[    2.860409] dwhdmi-rockchip fdea0000.hdmi: use tmds mode
[    2.860469] dwhdmi-rockchip fdea0000.hdmi: use tmds mode
[    2.863246] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    2.863282] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    2.863696] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    2.864133] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    2.864507] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    2.864813] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    2.865116] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    2.865548] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    2.865559] dwhdmi-rockchip fdea0000.hdmi: get hdcp2.x capable failed:-5
[    2.865567] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[    2.895394] dw-dp fde60000.dp: aux failed to read dpcd: -110
[    2.908200] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
[    3.031332] rk3x-i2c fead0000.i2c: timeout, ipd: 0x90, state: 3
[    3.031378] rk3x-i2c fead0000.i2c: SCL hold by slave, check your device.
[    3.031393] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    3.031402] <<GTP-ERR>>[gt1x_init:2319] Reset guitar failed!
[    3.031409] <<GTP-INF>>[gt1x_reset_guitar:788] GTP RESET!
[    3.178356] dwmmc_rockchip fe2d0000.mmc: Busy; trying anyway
[    3.304660] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[    3.304684] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    3.304694] <<GTP-ERR>>[gt1x_init:2319] Reset guitar failed!
[    3.304701] <<GTP-INF>>[gt1x_reset_guitar:788] GTP RESET!
[    3.578034] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[    3.578058] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    3.578068] <<GTP-ERR>>[gt1x_init:2319] Reset guitar failed!
[    3.578075] <<GTP-INF>>[gt1x_reset_guitar:788] GTP RESET!
[    3.678367] mmc_host mmc2: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
[    3.679678] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
[    3.682178] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card1/input3
[    3.684103] input: rockchip-hdmi1 rockchip-hdmi1 as /devices/platform/hdmi1-sound/sound/card2/input4
[    3.687483] rkcif rkcif-mipi-lvds2: clear unready subdev num: 1
[    3.687744] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    3.687757] rkcif-mipi-lvds2: Async subdev notifier completed
[    3.687768] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    3.687772] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
[    3.687824] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    3.687831] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
[    3.688750] RKNPU fdab0000.npu: Adding to iommu group 0
[    3.688862] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[    3.690160] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[    3.690176] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[    3.690186] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[    3.690541] [drm] Initialized rknpu 0.9.3 20231121 for fdab0000.npu on minor 1
[    3.694123] RKNPU fdab0000.npu: RKNPU: bin=0
[    3.694327] RKNPU fdab0000.npu: leakage=11
[    3.694362] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
[    3.701787] RKNPU fdab0000.npu: pvtm=875
[    3.706267] RKNPU fdab0000.npu: pvtm-volt-sel=3
[    3.707099] RKNPU fdab0000.npu: avs=0
[    3.707201] RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[    3.716841] RKNPU fdab0000.npu: failed to find power_model node
[    3.716851] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[    3.716856] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
[    3.717758] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.720043] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.720235] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.720246] cfg80211: failed to load regulatory.db
[    3.721258] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[    3.721736] rockchip-suspend not set sleep-mode-config for mem-lite
[    3.721744] rockchip-suspend not set wakeup-config for mem-lite
[    3.721755] rockchip-suspend not set sleep-mode-config for mem-ultra
[    3.721762] rockchip-suspend not set wakeup-config for mem-ultra
[    3.723219] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 406; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '15:27:31', on 'Jun  1 2024'.
[    3.723700] Mali: 
[    3.723703] Mali device driver loaded
[    3.723720] rkisp rkisp0-vir0: clear unready subdev num: 1
[    3.724033] rkisp0-vir0: Async subdev notifier completed
[    3.724051] ALSA device list:
[    3.724059]   #0: rockchip,hdmiin
[    3.724066]   #1: rockchip-hdmi0
[    3.724072]   #2: rockchip-hdmi1
[    3.851485] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[    3.851529] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    3.851540] <<GTP-ERR>>[gt1x_init:2319] Reset guitar failed!
[    3.851548] <<GTP-INF>>[gt1x_reset_guitar:788] GTP RESET!
[    3.898225] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    4.124641] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[    4.124669] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    4.124679] <<GTP-ERR>>[gt1x_init:2319] Reset guitar failed!
[    4.124686] <<GTP-ERR>>[gt1x_init:2345] Init failed, use default setting
[    4.327993] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[    4.328017] <<GTP-ERR>>[_do_i2c_read:390] I2c Transfer error! (-110)
[    4.328027] <<GTP-ERR>>[gt1x_get_chip_type:895] I2c communication error.
[    4.328035] <<GTP-ERR>>[gt1x_init:2355] Get chip type failed!
[    4.423061] dwmmc_rockchip fe2d0000.mmc: Busy; trying anyway
[    4.534672] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[    4.534695] <<GTP-ERR>>[_do_i2c_read:390] I2c Transfer error! (-110)
[    4.534705] <<GTP-ERR>>[gt1x_read_version:845] Read version failed!
[    4.609122] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
[    4.848126] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[    4.848152] <<GTP-ERR>>[_do_i2c_read:390] I2c Transfer error! (-110)
[    4.848162] <<GTP-ERR>>[gt1x_read_version:845] Read version failed!
[    4.857922] rk-pcie fe170000.pcie: PCIe Link Fail, LTSSM is 0x3, hw_retries=0
[    4.874589] rk-pcie fe150000.pcie: PCIe Link Fail, LTSSM is 0x0, hw_retries=0
[    4.874598] rk-pcie fe150000.pcie: failed to initialize host
[    4.923072] mmc_host mmc2: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
[    5.141481] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[    5.161325] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[    5.161348] <<GTP-ERR>>[_do_i2c_read:390] I2c Transfer error! (-110)
[    5.161357] <<GTP-ERR>>[gt1x_read_version:845] Read version failed!
[    5.268071] <<GTP-INF>>[gt1x_read_version:863] IC VERSION:GT_000000(Patch)_0000(Mask)_00(SensorID)
[    5.268093] <<GTP-INF>>[gt1x_init_panel:606] Config group0 used, length:239
[    5.268100] <<GTP-INF>>[gt1x_init_panel:657] X_MAX=4096,Y_MAX=4096,TRIGGER=0x01,WAKEUP_LEVEL=1
[    5.504589] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 2
[    5.504601] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    5.668831] dwmmc_rockchip fe2d0000.mmc: Busy; trying anyway
[    5.744590] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 2
[    5.744601] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    5.984589] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 2
[    5.984600] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    6.168842] mmc_host mmc2: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
[    6.224586] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 2
[    6.224597] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    6.388137] mmc_host mmc2: Bus speed (slot 0) = 187500Hz (slot req 100000Hz, actual 93750HZ div = 1)
[    6.464738] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 2
[    6.464819] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    6.464839] <<GTP-ERR>>[gt1x_send_cfg:551] Send config failed!
[    6.464857] <<GTP-ERR>>[gt1x_init:2367] Init panel failed.
[    6.465991] <<GTP-ERR>>[gt1x_ts_probe:587] GTP init failed!!!
[    6.466351] Goodix-TS-GT1X: probe of 5-0014 failed with error -2147483644
[    6.476157] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[    6.476191] VFS: Mounted root (ext4 filesystem) on device 179:6.
[    6.476649] devtmpfs: mounted
[    6.480307] Freeing unused kernel memory: 6656K
[    6.927649] dwmmc_rockchip fe2d0000.mmc: Busy; trying anyway
[    7.204657] rk_pcie_establish_link: 232 callbacks suppressed
[    7.204665] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.231325] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.257991] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.284658] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.311325] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.337991] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.364660] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.391324] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.417991] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.427662] mmc_host mmc2: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
[    7.444662] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.448132] Run /sbin/init as init process
[    7.482965] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
[    7.574211] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[    7.576476] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
Start mounting all internal partitions in /etc/fstab
Log saved to /var/log/mount-all.log
Note: Will skip fsck, remove /.skip_fsck to enable
[0]: Handling /dev/mmcblk0p6 / ext4 rw,noauto 1
[1]: Handling /dev/mmcblk0p7 /oem ext4 defaults 2
[2]: Handling /dev/mmcblk0p8 /userdata ext4 defaults 2
[2]: Resizing /dev/mmcblk0p8(ext4)
[1]: Resizing /dev/mmcblk0p7(ext4)
[0]: Resizing /dev/mmcblk0p6(ext4)
resize2fs 1.46.5 (30-Dec-2021)
resize2fs 1.46.5 (30-Dec-2021)
resize2fs 1.46.5 (30-Dec-2021)
[    7.674515] EXT4-fs (mmcblk0p6): resizing filesystem from 209664 to 3670016 blocks
[    7.674709] EXT4-fs (mmcblk0p7): resizing filesystem from 17048 to 131072 blocks
[    7.674790] EXT4-fs (mmcblk0p8): resizing filesystem from 4368 to 15253472 blocks
[    7.760583] EXT4-fs (mmcblk0p6): resized filesystem to 3670016
[    7.765094] EXT4-fs (mmcblk0p7): resized filesystem to 131072
Filesystem at /dev/mmcblk0p6 is mounted on /; on-line resizing required
old_desc_blocks = 1, new_desc_blocks = 1
The filesystem on /dev/mmcblk0p6 is now 3670016 (4k) blocks long.

Filesystem at /dev/mmcblk0p7 is mounted on /oem; on-line resizing required
old_desc_blocks = 1, new_desc_blocks = 1
The filesystem on /dev/mmcblk0p7 is now 131072 (1k) blocks long.

[    7.858278] EXT4-fs (mmcblk0p8): resizing filesystem from 4587521 to 15253472 blocks
[    7.858325] EXT4-fs (mmcblk0p8): Converting file system to meta_bg
[    7.858377] EXT4-fs (mmcblk0p8): resizing filesystem from 4587521 to 15253472 blocks
[    8.126190] EXT4-fs (mmcblk0p8): resized filesystem to 15253472
Filesystem at /dev/mmcblk0p8 is mounted on /userdata; on-line resizing required
old_desc_blocks = 1, new_desc_blocks = 117
The filesystem on /dev/mmcblk0p8 is now 15253472 (1k) blocks long.

Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
Populating /dev using udev: [    8.258532] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.258996] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.259388] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.259725] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.260067] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.260412] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.260421] dwhdmi-rockchip fdea0000.hdmi: get hdcp2.x capable failed:-5
[    8.260431] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[    8.261639] udevd[430]: starting version 3.2.10
[    8.272998] udevd[431]: starting eudev-3.2.10
[    8.288126] dw-dp fde60000.dp: aux failed to read dpcd: -110
[    8.297561] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.297788] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.298492] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.298729] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.299055] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.299505] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[    8.327787] dw-dp fde60000.dp: aux failed to read dpcd: -110
[    8.331234] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.331966] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.332606] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.332837] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.333051] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.333553] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[    8.359339] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[    8.359350] rkcif_tools_id2: update sensor info failed -19
[    8.359444] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[    8.359449] rkcif_scale_ch1: update sensor info failed -19
[    8.359917] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    8.359922] stream_cif_mipi_id0: update sensor info failed -19
[    8.360206] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[    8.360210] stream_cif_mipi_id3: update sensor info failed -19
[    8.360624] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[    8.360630] rkcif_scale_ch3: update sensor info failed -19
[    8.360790] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[    8.360810] stream_cif_mipi_id1: update sensor info failed -19
[    8.361011] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[    8.361015] stream_cif_mipi_id2: update sensor info failed -19
[    8.361636] dw-dp fde60000.dp: aux failed to read dpcd: -110
[    8.361746] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[    8.361753] rkcif_tools_id1: update sensor info failed -19
[    8.362575] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    8.362581] rkcif_scale_ch0: update sensor info failed -19
[    8.365261] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    8.365268] rkcif_tools_id0: update sensor info failed -19
[    8.366157] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[    8.366165] rkcif_scale_ch2: update sensor info failed -19
[    8.379061] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.379291] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.379413] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.379526] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.379639] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.379752] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
done
Starting irqbalance: OK
Saving random seed: OK
Starting system message bus: done
Starting bluetoothd: OK
Starting network: [    8.481224] dwhdmi-rockchip fdea0000.hdmi: i2c read time out!
[    8.481249] dwhdmi-rockchip fdea0000.hdmi: get hdcp2.x capable failed:-11
[    8.481258] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
ln: failed to create symbolic link '': No such file or directory
Failed to detect Wi-Fi/BT chip!
OK
[    8.509621] dw-dp fde60000.dp: aux failed to read dpcd: -110
Starting dhcpcd...
[    8.512876] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.513180] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.513509] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.513782] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.514006] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.514234] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.514241] dwhdmi-rockchip fdea0000.hdmi: get hdcp2.x capable failed:-5
[    8.514249] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
dhcpcd-9.4.1 starting
DHCPCD_ARGS: interface not found
dhcpcd exited
Starting ntpd: [    8.541566] dw-dp fde60000.dp: aux failed to read dpcd: -110
OK
starting weston... done.
[    8.559265] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.559823] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.560301] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.560649] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.560994] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.561268] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
Starting dropbear sshd: OK
Starting pulseaudio: OK
[    8.590510] dw-dp fde60000.dp: aux failed to read dpcd: -110
Starting dnsmasq: [    8.593260] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.593594] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.593889] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.594108] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.594325] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.594438] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.594552] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.594561] dwhdmi-rockchip fdea0000.hdmi: get hdcp1.4 capable failed:-5
[    8.594570] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
OK
Starting input-event-daemon: W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified).
W: [pulseaudio] main.c: Compiled with DEPRECATED libsamplerate support!
done
[    8.623154] dw-dp fde60000.dp: aux failed to read dpcd: -110
[    8.626433] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.627763] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.627995] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.628222] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.628440] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.628553] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.628559] dwhdmi-rockchip fdea0000.hdmi: get hdcp1.4 capable failed:-5
[    8.628566] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
root@rk3588-buildroot:/# [    8.658077] dw-dp fde60000.dp: aux failed to read dpcd: -110
[    8.659785] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.660013] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.660223] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.660336] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.660450] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
Date: 1970-01-01 UTC
[00:00:07.121] weston 13.0.0
               https://wayland.freedesktop.org
               Bug reports to: https://gitlab.freedesktop.org/wayland/weston/issues/
               Build: 13.0.0
[00:00:07.121] Command line: /usr/bin/weston
[00:00:07.121] OS: Linux, 5.10.198, #1 SMP Sat Jun 1 15:25:20 CST 2024, aarch64
[00:00:07.121] Flight recorder: enabled
[00:00:07.121] warning: XDG_RUNTIME_DIR "/var/run" is not configured
correctly.  Unix access mode must be 0700 (current mode is 0755),
and must be owned by the user UID 0 (current owner is UID 0).
Refer to your distribution on how to get it, or
http://www.freedesktop.org/wiki/Specifications/basedir-spec
on how to implement it.
/etc/xdg/weston/weston.ini.d/02-desktop.ini: "shell/locking" from "false" to "true"
[00:00:07.122] Using config file '/etc/xdg/weston/weston.ini'
[00:00:07.123] Output repaint window is -1 ms maximum.
[00:00:07.123] Loading module '/usr/lib/libweston-13/drm-backend.so'
[00:00:07.126] initializing drm backend
[00:00:07.126] Entering mirror mode.
[00:00:07.126] Trying direct launcher...
[00:00:07.128] using /dev/dri/card0
[00:00:07.128] DRM: does not support atomic modesetting
[00:00:07.128] DRM: does not support GBM modifiers
[00:00:07.128] DRM: does not support async page flipping
[00:00:07.128] DRM: supports picture aspect ratio
[    8.693770] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_startup: device is no connected or audio is off
[    8.693791] hdmi-audio-codec hdmi-audio-codec.7.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[    8.705384] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_startup: device is no connected or audio is off
[    8.705418] hdmi-audio-codec hdmi-audio-codec.7.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[    8.716995] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_startup: device is no connected or audio is off
[    8.717024] hdmi-audio-codec hdmi-audio-codec.7.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
E: [pulseaudio] module-alsa-card.c: Failed to find a working profile.
E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="platform-hdmiin-sound" card_name="alsa_card.platform-hdmiin-sound" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
W: [pulseaudio] authkey.c: Failed to open cookie file '/userdata/.pulse/.config/pulse/cookie': No such file or directory
W: [pulseaudio] authkey.c: Failed to load authentication key '/userdata/.pulse/.config/pulse/cookie': No such file or directory
W: [pulseaudio] authkey.c: Failed to open cookie file '/userdata/.pulse/.pulse-cookie': No such file or directory
W: [pulseaudio] authkey.c: Failed to load authentication key '/userdata/.pulse/.pulse-cookie': No such file or directory
E: [pulseaudio] module-rescue-streams.c: module-rescue-stream is obsolete and should no longer be loaded. Please remove it from your configuration.
E: [pulseaudio] module-console-kit.c: GetSessionsForUnixUser() call failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.ConsoleKit was not provided by any .service files
E: [pulseaudio] module.c: Failed to load module "module-console-kit" (argument: ""): initialization failed.
W: [pulseaudio] server-lookup.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead
W: [pulseaudio] main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead
[    8.764646] dwhdmi-rockchip fdea0000.hdmi: i2c read time out!
[    8.764691] dwhdmi-rockchip fdea0000.hdmi: get hdcp2.x capable failed:-11
[    8.764703] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[    8.767954] rk-pcie fe170000.pcie: PCIe Link Fail, LTSSM is 0x3, hw_retries=1
[    8.793181] dw-dp fde60000.dp: aux failed to read dpcd: -110
[00:00:07.240] Loading module '/usr/lib/libweston-13/gl-renderer.so'
arm_release_ver: g13p0-01eac0, rk_so_ver: 10
[    8.805634] file system registered
[    8.812393] mali fb000000.gpu: Loading Mali firmware 0x1010000
[    8.815361] mali fb000000.gpu: Mali firmware git_sha: ee476db42870778306fa8d559a605a73f13e455c 
[00:00:07.271] EGL version: 1.4 Valhall-"g13p0-01eac0"
[00:00:07.271] EGL vendor: ARM
[00:00:07.271] EGL client APIs: OpenGL_ES
[00:00:07.271] EGL features:
               EGL Wayland extension: yes
               context priority: yes
               buffer age: no
               partial update: yes
               swap buffers with damage: no
               configless context: yes
               surfaceless context: yes
               dmabuf support: modifiers
[00:00:07.291] GL version: OpenGL ES 3.2 v1.g13p0-01eac0.11addb9882ee8209dc0912af75110af7
[00:00:07.291] GLSL version: OpenGL ES GLSL ES 3.20
[00:00:07.291] GL vendor: ARM
[00:00:07.291] GL renderer: Mali-G610
[    8.858362] read descriptors
[    8.858404] read strings
[00:00:07.376] GL ES 3.2 - renderer features:
               read-back format: ARGB8888
               glReadPixels supports y-flip: no
               wl_shm 10 bpc formats: yes
               wl_shm 16 bpc formats: no
               wl_shm half-float formats: yes
               internal R and RG formats: yes
               OES_EGL_image_external: yes
               wl_shm sub-image to texture: yes
[00:00:07.376] Using GL renderer
[00:00:07.387] event2  - adc-keys: is tagged by udev as: Keyboard
[00:00:07.387] event2  - adc-keys: device is a keyboard
[00:00:07.389] event0  - rk805 pwrkey: is tagged by udev as: Keyboard
[00:00:07.389] event0  - rk805 pwrkey: device is a keyboard
[00:00:07.390] event3  - rockchip-hdmi0 rockchip-hdmi0: is tagged by udev as: Switch
[00:00:07.390] event3  - not using input device '/dev/input/event3'
[00:00:07.391] event4  - rockchip-hdmi1 rockchip-hdmi1: is tagged by udev as: Switch
[00:00:07.391] event4  - not using input device '/dev/input/event4'
[00:00:07.392] event1  - rockchip,hdmiin rockchip,hdmiin: is tagged by udev as: Switch
[00:00:07.392] event1  - not using input device '/dev/input/event1'
[00:00:07.426] libinput: configuring device "adc-keys".
[00:00:07.427] libinput: configuring device "rk805 pwrkey".
[00:00:07.427] Registered plugin API 'weston_drm_output_api_v1' of size 40
[00:00:07.427] Color manager: no-op
[00:00:07.427] Compositor capabilities:
               arbitrary surface rotation: yes
               screen capture uses y-flip: yes
               cursor planes: yes
[    8.990690] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
               arbitrary resolutions: no
[    8.991031] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
               view mask clipping: yes
[    8.991440] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
               explicit sync: yes
[    8.991847] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
               color operations: yes
[    8.992176] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
               presentation clock: CLOCK_MONOTONIC, id 1
[    8.992503] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
               presentation clock resolution: 0.000000001 s
[    8.992509] dwhdmi-rockchip fdea0000.hdmi: get hdcp2.x capable failed:-5
[00:00:07.427] Loading module '/usr/lib/weston/desktop-shell.so'
[    8.992515] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[00:00:07.429] DRM: head 'HDMI-A-1' found, connector 208 is disconnected.
[00:00:07.431] DRM: head 'HDMI-A-2' found, connector 224 is connected, EDID make 'unknown', model 'unknown', serial ''
               Supported EOTF modes: SDR
[00:00:07.431] DRM: head 'DSI-1' found, connector 238 is connected, EDID make 'unknown', model 'unknown', serial ''
               Supported EOTF modes: SDR
[00:00:07.431] DRM: head 'DP-1' found, connector 240 is disconnected.
[    9.022818] dw-dp fde60000.dp: aux failed to read dpcd: -110
[00:00:07.461] DRM: head 'DP-2' found, connector 248 is disconnected.
[00:00:07.461] launching '/usr/libexec/weston-keyboard'
[00:00:07.462] launching '/usr/libexec/weston-desktop-shell'
[00:00:07.463] HDMI-A-2 using at least 2 buffers
[00:00:07.464] Output 'HDMI-A-2' attempts EOTF mode: SDR
[00:00:07.464] Output 'HDMI-A-2' using color profile: stock sRGB color profile
[00:00:07.464] Chosen EGL config details: id:   9 rgba: 8 8 8 0 buf: 24 dep:  0 stcl: 0 int: 0-1 type: win|pbf|swap_preserved vis_id: XRGB8888 (0x34325258)
[00:00:07.464] Output HDMI-A-2 (crtc 93) video modes:
               1920x1080@60.0 16:9, preferred, current, 148.5 MHz
               1920x1080@50.0 16:9, 148.5 MHz
               1280x720@60.0 16:9, 74.2 MHz
               1280x720@50.0 16:9, 74.2 MHz
               1920x1080@60.0, preferred, 148.5 MHz
[00:00:07.464] associating input device event2 with output HDMI-A-2 (none by udev)
[00:00:07.464] associating input device event0 with output HDMI-A-2 (none by udev)
[00:00:07.464] Output HDMI-A-2 changed to mirror output
[00:00:07.464] Output 'HDMI-A-2' enabled with head(s) HDMI-A-2
[00:00:07.464] DSI-1 using at least 2 buffers
[00:00:07.464] Output 'DSI-1' attempts EOTF mode: SDR
[00:00:07.464] Output 'DSI-1' using color profile: stock sRGB color profile
[00:00:07.465] Chosen EGL config details: id:   9 rgba: 8 8 8 0 buf: 24 dep:  0 stcl: 0 int: 0-1 type: win|pbf|swap_preserved vis_id: XRGB8888 (0x34325258)
[00:00:07.465] Output DSI-1 (crtc 137) video modes:
               1080x1920@59.9, preferred, current, 132.0 MHz
[00:00:07.465] associating input device event2 with output DSI-1 (none by udev)
[00:00:07.465] associating input device event0 with output DSI-1 (none by udev)
[00:00:07.465] Output 'DSI-1' enabled with head(s) DSI-1
[    9.041582] dwhdmi-rockchip fdea0000.hdmi: use tmds mode
[    9.092063] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_disable] Crtc atomic disable vp1
[    9.093951] android_work: did not send uevent (0 0 0000000000000000)
[    9.140477] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11(if:1000, flag:0x0) for vp1 dclk: 148500000
[    9.140518] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out1 div: 0 dclk_core1 div: 2
[    9.140528] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop1 to 148500000, get 148500000
[    9.140578] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
[    9.140848] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy pll locked!
[    9.140853] dwhdmi-rockchip fdea0000.hdmi: final tmdsclk = 148500000
[    9.140876] dwhdmi-rockchip fdea0000.hdmi: don't use dsc mode
[    9.140880] dwhdmi-rockchip fdea0000.hdmi: dw hdmi qp use tmds mode
[    9.140885] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: bus_width:0x16a8c8,bit_rate:1485000
[    9.141077] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy lane locked!
[    9.173972] dwhdmi-rockchip fdea0000.hdmi: use tmds mode
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "en_US.UTF-8" (mapped to "en_US.UTF-8")
could not create XKB compose table for locale 'en_US.UTF-8'.  Disabiling compose
xkbcommon: ERROR: couldn't find a Compose file for locale "en_US.UTF-8" (mapped to "en_US.UTF-8")
could not create XKB compose table for locale 'en_US.UTF-8'.  Disabiling compose
[    9.801301] rk-pcie fe170000.pcie: failed to initialize host
[   10.224886] Freeing drm_logo memory: 736K
[   21.301293] dw-dp fde60000.dp: aux failed to read dpcd: -110
[   21.454467] dwhdmi-rockchip fde80000.hdmi: i2c read err!
[   21.454604] dwhdmi-rockchip fde80000.hdmi: get hdcp1.4 capable failed:-5
[   21.456037] dwhdmi-rockchip fde80000.hdmi: i2c read err!
[   21.456119] dwhdmi-rockchip fde80000.hdmi: get hdcp2.x capable failed:-5
[   21.457593] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   21.458526] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   21.459266] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   21.460156] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   21.461712] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   21.462072] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[   21.491570] dw-dp fde60000.dp: aux failed to read dpcd: -110
[   21.493019] dwhdmi-rockchip fde80000.hdmi: i2c read err!
[   21.493110] dwhdmi-rockchip fde80000.hdmi: get hdcp1.4 capable failed:-5
[   21.494493] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[   21.494648] dwhdmi-rockchip fdea0000.hdmi: use tmds mode
[   21.494805] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11(if:800, flag:0x0) for vp0 dclk: 148500000
[   21.494935] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out0 div: 0 dclk_core0 div: 2
[   21.495003] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop0 to 148500000, get 148500000
[   21.495094] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
[   21.495460] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy pll locked!
[   21.495483] dwhdmi-rockchip fde80000.hdmi: final tmdsclk = 148500000
[   21.495567] dwhdmi-rockchip fde80000.hdmi: don't use dsc mode
[   21.495589] dwhdmi-rockchip fde80000.hdmi: dw hdmi qp use tmds mode
[   21.495616] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: bus_width:0x16a8c8,bit_rate:1485000
[   21.495866] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy lane locked!
[00:00:19.951] DRM: head 'HDMI-A-1' updated, connector 208 is connected, EDID make 'GSM', model '27MP35', serial ''
[   21.513408] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
               Supported EOTF modes: SDR
[   21.514079] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   21.514303] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   21.514657] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   21.514882] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   21.515107] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   21.515334] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   21.515344] dwhdmi-rockchip fdea0000.hdmi: get hdcp2.x capable failed:-5
[   21.515350] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[   21.546979] dw-dp fde60000.dp: aux failed to read dpcd: -110
[00:00:19.985] Detected a monitor change on head 'HDMI-A-2', not bothering to do anything about it.
[00:00:19.986] Detected a monitor change on head 'DSI-1', not bothering to do anything about it.
[00:00:19.986] HDMI-A-1 using at least 2 buffers
[00:00:19.986] Output 'HDMI-A-1' attempts EOTF mode: SDR
[00:00:19.986] Output 'HDMI-A-1' using color profile: stock sRGB color profile
[00:00:19.986] Chosen EGL config details: id:   9 rgba: 8 8 8 0 buf: 24 dep:  0 stcl: 0 int: 0-1 type: win|pbf|swap_preserved vis_id: XRGB8888 (0x34325258)
[00:00:19.986] Output HDMI-A-1 (crtc 71) video modes:
               1920x1080@60.0, preferred, current, 148.5 MHz
               1920x1080@60.0 16:9, 148.5 MHz
               1920x1080@59.9 16:9, 148.4 MHz
               1920x1080i@60.0, 74.2 MHz
               1920x1080i@60.0 16:9, 74.2 MHz
               1920x1080i@59.9 16:9, 74.2 MHz
               1920x1080@50.0 16:9, 148.5 MHz
               1920x1080i@50.0 16:9, 74.2 MHz
               1680x1050@59.9, 119.0 MHz
               1400x1050@59.9, 101.0 MHz
               1600x900@60.0, 108.0 MHz
               1280x1024@75.0, 135.0 MHz
               1280x1024@60.0, 108.0 MHz
               1440x900@59.9, 88.8 MHz
               1280x800@59.9, 71.0 MHz
               1152x864@75.0, 108.0 MHz
               1280x720@60.0, 74.2 MHz
               1280x720@60.0 16:9, 74.2 MHz
               1280x720@59.9 16:9, 74.2 MHz
               1280x720@50.0 16:9, 74.2 MHz
               1024x768@75.0, 78.8 MHz
               1024x768@60.0, 65.0 MHz
               800x600@75.0, 49.5 MHz
               800x600@60.3, 40.0 MHz
               720x576@50.0 16:9, 27.0 MHz
               720x480@60.0 4:3, 27.0 MHz
               720x480@60.0 16:9, 27.0 MHz
               720x480@59.9, 27.0 MHz
               720x480@59.9 16:9, 27.0 MHz
               640x480@75.0, 31.5 MHz
               640x480@60.0 4:3, 25.2 MHz
               640x480@59.9, 25.2 MHz
               640x480@59.9 4:3, 25.2 MHz
               720x400@70.1, 28.3 MHz
[00:00:19.986] Output HDMI-A-1 changed to mirror output
[00:00:19.986] Output 'HDMI-A-1' enabled with head(s) HDMI-A-1
[   21.564608] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[   21.595195] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[   33.974255] dw-dp fde60000.dp: aux failed to read dpcd: -110
[   33.974632] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   33.976866] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   33.977353] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   33.978385] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   33.979125] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   33.979807] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   33.980177] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[   34.008737] dw-dp fde60000.dp: aux failed to read dpcd: -110
[   34.009029] dwhdmi-rockchip fdea0000.hdmi: use tmds mode
[   34.059454] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_disable] Crtc atomic disable vp0
[00:00:32.530] DRM: head 'HDMI-A-1' updated, connector 208 is disconnected.
[   34.091883] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   34.094713] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   34.095376] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   34.101623] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   34.112032] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   34.114679] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   34.115270] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[   34.148928] dw-dp fde60000.dp: aux failed to read dpcd: -110
[00:00:32.588] Output 'HDMI-A-1' no heads left, disabling.
[00:00:32.588] Disabling output HDMI-A-1
[00:00:32.589] Detected a monitor change on head 'HDMI-A-2', not bothering to do anything about it.
[00:00:32.589] Detected a monitor change on head 'DSI-1', not bothering to do anything about it.
[   34.424649] dw-dp fde60000.dp: aux failed to read dpcd: -110
[   34.581237] dwhdmi-rockchip fde80000.hdmi: i2c read err!
[   34.581330] dwhdmi-rockchip fde80000.hdmi: get hdcp1.4 capable failed:-5
[   34.582756] dwhdmi-rockchip fde80000.hdmi: i2c read err!
[   34.582839] dwhdmi-rockchip fde80000.hdmi: get hdcp2.x capable failed:-5
[   34.584046] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   34.585216] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   34.586076] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   34.586786] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   34.588585] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   34.588965] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[   34.618588] dw-dp fde60000.dp: aux failed to read dpcd: -110
[   34.618875] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[   34.618913] dwhdmi-rockchip fdea0000.hdmi: use tmds mode
[   34.619050] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11(if:800, flag:0x0) for vp0 dclk: 148500000
[   34.619152] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out0 div: 0 dclk_core0 div: 2
[   34.619195] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop0 to 148500000, get 148500000
[   34.635937] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
[   34.636359] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy pll locked!
[   34.636389] dwhdmi-rockchip fde80000.hdmi: final tmdsclk = 148500000
[   34.636469] dwhdmi-rockchip fde80000.hdmi: don't use dsc mode
[   34.636491] dwhdmi-rockchip fde80000.hdmi: dw hdmi qp use tmds mode
[   34.636517] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: bus_width:0x16a8c8,bit_rate:1485000
[   34.636768] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy lane locked!
[   35.151761] dwhdmi-rockchip fde80000.hdmi: i2c read err!
[   35.151848] dwhdmi-rockchip fde80000.hdmi: get hdcp2.x capable failed:-5
[00:00:33.592] DRM: head 'HDMI-A-1' updated, connector 208 is connected, EDID make 'GSM', model '27MP35', serial ''
[   35.153903] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
               Supported EOTF modes: SDR
[   35.154266] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   35.154690] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   35.155217] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   35.157107] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[   35.157523] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[   35.187227] dw-dp fde60000.dp: aux failed to read dpcd: -110
[00:00:33.626] Detected a monitor change on head 'HDMI-A-2', not bothering to do anything about it.
[00:00:33.626] Detected a monitor change on head 'DSI-1', not bothering to do anything about it.
[00:00:33.626] HDMI-A-1 using at least 2 buffers
[00:00:33.626] Output 'HDMI-A-1' attempts EOTF mode: SDR
[00:00:33.626] Output 'HDMI-A-1' using color profile: stock sRGB color profile
[00:00:33.626] Chosen EGL config details: id:   9 rgba: 8 8 8 0 buf: 24 dep:  0 stcl: 0 int: 0-1 type: win|pbf|swap_preserved vis_id: XRGB8888 (0x34325258)
[00:00:33.626] Output HDMI-A-1 (crtc 71) video modes:
               1920x1080@60.0, preferred, current, 148.5 MHz
               1920x1080@60.0 16:9, 148.5 MHz
               1920x1080i@60.0, 74.2 MHz
               1920x1080i@60.0 16:9, 74.2 MHz
               1920x1080@50.0 16:9, 148.5 MHz
               1920x1080i@50.0 16:9, 74.2 MHz
               1600x900@60.0, 108.0 MHz
               1280x1024@60.0, 108.0 MHz
               1152x864@75.0, 108.0 MHz
               1280x720@60.0, 74.2 MHz
               1280x720@60.0 16:9, 74.2 MHz
               1280x720@50.0 16:9, 74.2 MHz
               800x600@75.0, 49.5 MHz
               720x576@50.0 16:9, 27.0 MHz
               720x480@59.9, 27.0 MHz
               720x480@59.9 16:9, 27.0 MHz
[00:00:33.626] Output HDMI-A-1 changed to mirror output
[00:00:33.626] Output 'HDMI-A-1' enabled with head(s) HDMI-A-1
[   35.208322] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[   35.236052] dwhdmi-rockchip fde80000.hdmi: use tmds mode

root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# v4l2-ctl --list-devices
[  259.626683] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[  259.626723] stream_cif_mipi_id0: update sensor info failed -19
[  259.626753] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[  259.626761] stream_cif_mipi_id1: update sensor info failed -19
[  259.626785] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[  259.626792] stream_cif_mipi_id2: update sensor info failed -19
[  259.626816] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[  259.626822] stream_cif_mipi_id3: update sensor info failed -19
[  259.626846] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
rk_hdmirx (fdee0000.hdmirx-controller):
[  259.626853] rkcif_scale_ch0: update sensor info failed -19
    /dev/video20
[  259.626875] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[  259.626882] rkcif_scale_ch1: update sensor info failed -19
rkisp-statistics (platform: rkisp):
[  259.626906] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
    /dev/video18
[  259.626912] rkcif_scale_ch2: update sensor info failed -19
    /dev/video19
[  259.626935] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!

[  259.626941] rkcif_scale_ch3: update sensor info failed -19
rkcif-mipi-lvds2 (platform:rkcif):
[  259.626964] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
    /dev/media0
[  259.626971] rkcif_tools_id0: update sensor info failed -19

[  259.626994] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
rkisp_mainpath (platform:rkisp0-vir0):
[  259.627000] rkcif_tools_id1: update sensor info failed -19
    /dev/video11
[  259.627023] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
    /dev/video12
[  259.627029] rkcif_tools_id2: update sensor info failed -19
    /dev/video13
[  259.632102] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
    /dev/video14
[  259.632111] stream_cif_mipi_id0: update sensor info failed -19
    /dev/video15
    /dev/video16
    /dev/video17
    /dev/media1

Failed to open /dev/video0: No such device
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# [  413.535735] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_interrupts_setup: 1
[  413.546792] fdee0000.hdmirx-controller: hdmirx_wait_lock_and_get_timing HDMI pull out, return!
[  413.625647] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_interrupts_setup: 1
[  417.254425] fdee0000.hdmirx-controller: Vertical Sync threshold reached interrupt 0x2
[  417.373843] fdee0000.hdmirx-controller: hdmirx_wait_lock_and_get_timing signal lock ok, i:481!
[  417.771112] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_delayed_work_audio: enable audio
[  417.970307] fdee0000.hdmirx-controller: hdmirx_format_change: New format: 3840x2160p29.96 (4400x2250)
[  420.644685] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_interrupts_setup: 1
[  420.724653] fdee0000.hdmirx-controller: Vertical Sync threshold reached interrupt 0x2
[  420.811109] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_delayed_work_audio: enable audio
[  420.814674] fdee0000.hdmirx-controller: hdmirx_wait_lock_and_get_timing signal lock ok, i:23!
[  421.407823] fdee0000.hdmirx-controller: hdmirx_format_change: New format: 3840x2160p29.96 (4400x2250)

root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# v4l2-ctl --list-devices
[  431.542324] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[  431.542357] stream_cif_mipi_id0: update sensor info failed -19
[  431.542387] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[  431.542394] stream_cif_mipi_id1: update sensor info failed -19
[  431.542419] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[  431.542426] stream_cif_mipi_id2: update sensor info failed -19
[  431.542449] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[  431.542456] stream_cif_mipi_id3: update sensor info failed -19
[  431.542480] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
rk_hdmirx (fdee0000.hdmirx-controller):
[  431.542487] rkcif_scale_ch0: update sensor info failed -19
    /dev/video20
[  431.542510] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[  431.542516] rkcif_scale_ch1: update sensor info failed -19
rkisp-statistics (platform: rkisp):
[  431.542539] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
    /dev/video18
[  431.542546] rkcif_scale_ch2: update sensor info failed -19
    /dev/video19
[  431.542569] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!

[  431.542576] rkcif_scale_ch3: update sensor info failed -19
rkcif-mipi-lvds2 (platform:rkcif):
[  431.542599] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
    /dev/media0
[  431.542606] rkcif_tools_id0: update sensor info failed -19

[  431.542629] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
rkisp_mainpath (platform:rkisp0-vir0):
[  431.542636] rkcif_tools_id1: update sensor info failed -19
    /dev/video11
[  431.542658] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
    /dev/video12
[  431.542665] rkcif_tools_id2: update sensor info failed -19
    /dev/video13
[  431.547644] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
    /dev/video14
[  431.547654] stream_cif_mipi_id0: update sensor info failed -19
    /dev/video15
    /dev/video16
    /dev/video17
    /dev/media1

Failed to open /dev/video0: No such device
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# v4l2-ctl --list-formats-ext -d /dev/video20
ioctl: VIDIOC_ENUM_FMT
    Type: Video Capture Multiplanar

    [0]: 'BGR3' (24-bit BGR 8-8-8)
    [1]: 'NV24' (Y/CbCr 4:4:4)
    [2]: 'NV16' (Y/CbCr 4:2:2)
    [3]: 'NV12' (Y/CbCr 4:2:0)
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# v4l2-ctl -V -d /dev/video20
Format Video Capture Multiplanar:
    Width/Height      : 3840/2160
    Pixel Format      : 'BGR3' (24-bit BGR 8-8-8)
    Field             : None
    Number of planes  : 1
    Flags             : premultiplied-alpha, 0x000000fe
    Colorspace        : sRGB
    Transfer Function : Unknown (0x000000b8)
    YCbCr/HSV Encoding: Unknown (0x000000ff)
    Quantization      : Full Range
    Plane 0           :
       Bytes per Line : 11520
       Size Image     : 24883200
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
rt ! kmssinkbuildroot:/# gst-launch-1.0 v4l2src device=/dev/video20 ! videoconver
Setting pipeline to PAUSED ...
[  480.529798] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[  480.557128] dw-dp fde60000.dp: aux failed to read dpcd: -110
[  480.574584] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[  480.602158] dw-dp fde60000.dp: aux failed to read dpcd: -110
Using mplane plugin for capture 
Pipeline is live and does not need PREROLL ...
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
[  480.636938] fdee0000.hdmirx-controller: hdmirx_start_streaming: delay_line:1440
Redistribute latency...
[  481.820671] fdee0000.hdmirx-controller: rcv frames
^Chandling interrupt.
Interrupt: Stopping pipeline ...
Execution ended after 0:01:52.336960245
Setting pipeline to NULL ...
[  592.952920] fdee0000.hdmirx-controller: stream start stopping
[  592.968364] fdee0000.hdmirx-controller: stream stopping finished
Freeing pipeline ...
root@rk3588-buildroot:/# DDR d5483af87d cym 23/11/23-16:15:24,fwver: v1.15
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x13
CH0 RX Vref:27.9%, TX Vref:23.8%,0.0%
CH1 RX Vref:29.7%, TX Vref:23.8%,0.0%
CH2 RX Vref:31.4%, TX Vref:24.8%,0.0%
CH3 RX Vref:29.3%, TX Vref:24.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-ge4e124926e-230922 #lxh (Sep 25 2023 - 10:58:38), fwver: v1.13
unknown raw ID 0 0 0
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 0
spl: mmc init failed with error: -123
Trying to boot from MMC1
SPL: A/B-slot: _a, successful: 0, tries-remain: 7
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(2e8446f969...) + OK
## Checking uboot 0x00200000 ... sha256(bf7cc53d6a...) + OK
## Checking fdt 0x00345490 ... sha256(a434b1c4fe...) + OK
## Checking atf-2 0xff100000 ... sha256(9f75e6ec37...) + OK
## Checking atf-3 0x000f0000 ... sha256(c80587de50...) + OK
## Checking optee 0x08400000 ... sha256(4b2d406bfc...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 79.630/211.580 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-662-g4acbe711b-dirty:finley.xiao, fwver: v1.44
NOTICE:  BL31: Built : 16:44:24, Nov  7 2023
INFO:    spec: 0x1
INFO:    code: 0x88
INFO:    ext 32k is not valid
INFO:    ddr: stride-en 4CH
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO:    l3 cache partition cfg-0
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
I/TC: 
I/TC: OP-TEE version: 3.13.0-752-g62aa10b78 #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #2 Mon Sep 25 10:04:34 CST 2023 aarch64, fwver: v1.15 
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2017.09 (Jun 01 2024 - 15:24:59 +0800)

Model: Rockchip RK3588 Evaluation Board
MPIDR: 0x81000000
PreSerial: 2, raw, 0xfeb50000
DRAM:  4 GiB
Sysmem: init
Relocation Offset: eda18000
Relocation fdt: eb9fa160 - eb9fecd0
CR: M/C/I
Using default environment

optee api revision: 2.0
mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS400 Enhanced Strobe, 200Mhz
PartType: EFI
TEEC: Waring: Could not find security partition
DM: v2
boot mode: None
RESC: 'boot', blk@0x00019a97
resource: sha256+
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big0_s0 800000 uV
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big1_s0 800000 uV
I2c1 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_npu_s0 800000 uV
spi2: RK806: 2
ON=0x40, OFF=0x00
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
Device 'gpio@fd8a0000': seq 0 is in use by 'gpio@fd8a0000'
serdes_power_init failed to get serdes misc device
get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts
get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts
get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts
get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts
Could not find baseparameter partition
Model: Rockchip RK3588 EVB7 V11 Board
MPIDR: 0x81000000
Minidump: init...
Rockchip UBOOT DRM driver version: v1.0.1
vp0 have layer nr:2[0 2 ], primary plane: 2
vp1 have layer nr:2[1 3 ], primary plane: 3
vp2 have layer nr:2[6 8 ], primary plane: 8
vp3 have layer nr:2[7 9 ], primary plane: 9
Using display timing dts
dsi@fde20000:  detailed mode clock 132000 kHz, flags[a]
    H: 1080 1095 1099 1129
    V: 1920 1935 1937 1952
bus_format: 100e
VOP update mode to: 1080x1920p60, type: MIPI0 for VP3
VP3 set crtc_clock to 132000KHz
VOP VP3 enable Esmart3[654x270->654x270@213x825] fmt[2] addr[0xedf04000]
final DSI-Link bandwidth: 880000 Kbps x 4
i2c read err!
i2c read err!
i2c read err!
i2c read err!
i2c read err!
can't get edid block:0
failed to get edid
Could not find baseparameter partition
color_format:0
hdmi_select_link_config use tmds mode
mode:1920x1080 bus_format:0x100a
hdmi@fde80000:  detailed mode clock 148500 kHz, flags[5]
    H: 1920 2008 2052 2200
    V: 1080 1084 1089 1125
bus_format: 100a
VOP update mode to: 1920x1080p60, type: HDMI0 for VP0
dclk:148500,if_pixclk_div;2,if_dclk_div:4
VP0 set crtc_clock to 148500KHz
VOP VP0 enable Esmart0[654x270->654x270@633x405] fmt[2] addr[0xedf04000]
CEA mode used vic=16
mtmdsclock:148500000
hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
hdptx phy pll locked!
dw_hdmi_setup HDMI mode
don't use dsc mode
dw hdmi qp use tmds mode
bus_width:0x16a8c8,bit_rate:1485000
hdptx phy lane locked!
i2c read err!
i2c read err!
i2c read err!
i2c read err!
i2c read err!
can't get edid block:0
failed to get edid
Could not find baseparameter partition
color_format:0
hdmi_select_link_config use tmds mode
mode:1920x1080 bus_format:0x100a
hdmi@fdea0000:  detailed mode clock 148500 kHz, flags[5]
    H: 1920 2008 2052 2200
    V: 1080 1084 1089 1125
bus_format: 100a
VOP update mode to: 1920x1080p60, type: HDMI1 for VP1
dclk:148500,if_pixclk_div;2,if_dclk_div:4
VP1 set crtc_clock to 148500KHz
VOP VP1 enable Esmart1[654x270->654x270@633x405] fmt[2] addr[0xedf04000]
CEA mode used vic=16
mtmdsclock:148500000
hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
hdptx phy pll locked!
dw_hdmi_setup HDMI mode
don't use dsc mode
dw hdmi qp use tmds mode
bus_width:0x16a8c8,bit_rate:1485000
hdptx phy lane locked!
CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
  b0pll 24000 KHz
  b1pll 24000 KHz
  lpll 24000 KHz
  v0pll 24000 KHz
  aupll 786431 KHz
  cpll 1500000 KHz
  gpll 1188000 KHz
  npll 850000 KHz
  ppll 1100000 KHz
  aclk_center_root 702000 KHz
  pclk_center_root 100000 KHz
  hclk_center_root 396000 KHz
  aclk_center_low_root 500000 KHz
  aclk_top_root 750000 KHz
  pclk_top_root 100000 KHz
  aclk_low_top_root 396000 KHz
Net:   eth1: ethernet@fe1c0000
Hit key to stop autoboot('CTRL+C'):  0 
ANDROID: reboot reason: "(none)"
Not AVB images, AVB skip
No valid android hdr
Android image load failed
Android boot failed, error -1.
## Booting FIT Image at 0xe94a6340 with size 0x02352e00
Fdt Ramdisk skip relocation
## Loading kernel from FIT Image at e94a6340 ...
   Using 'conf' configuration
## Verified-boot: 0
   Trying 'kernel' kernel subimage
     Description:  unavailable
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0xe94ec740
     Data Size:    36751872 Bytes = 35 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x00400000
     Entry Point:  0x00400000
     Hash algo:    sha256
     Hash value:   b3d7a9ea18d9093684391acb0a7ff3cfd575390860bd560a5ef2c2b2bfda6949
   Verifying Hash Integrity ... sha256+ OK
## Loading fdt from FIT Image at e94a6340 ...
   Using 'conf' configuration
   Trying 'fdt' fdt subimage
     Description:  unavailable
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0xe94a6b40
     Data Size:    285407 Bytes = 278.7 KiB
     Architecture: AArch64
     Load Address: 0x08300000
     Hash algo:    sha256
     Hash value:   41edefa03a78d90e2d66de37c6ef6119a74aa40022c7a59eeeb8488700f39383
   Verifying Hash Integrity ... sha256+ OK
   Loading fdt from 0x08300000 to 0x08300000
   Booting using the fdt blob at 0x08300000
   Loading Kernel Image from 0xe94ec740 to 0x00400000 ... OK
   kernel loaded at 0x00400000, end = 0x0270ca00
   Using Device Tree in place at 0000000008300000, end 0000000008348ade
WARNING: could not set reg FDT_ERR_BADOFFSET.
## reserved-memory:
  cma: addr=10000000 size=8000000
  drm-logo@00000000: addr=edf00000 size=b8000
  ramoops@110000: addr=110000 size=e0000
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x1f0000000 - 0x200000000 (size: 0x10000000)
Total: 940.509/1239.530 ms

Starting kernel ...

[    1.244414] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    1.244432] Linux version 5.10.198 (viewpro@viewpro-ThinkBook-16-G5-IRH) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #1 SMP Sat Jun 1 15:25:20 CST 2024
[    1.247959] random: crng init done
[    1.255831] Machine model: Rockchip RK3588 EVB7 V11 Board
[    1.291561] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
[    1.296043] printk: bootconsole [uart8250] enabled
[    1.298802] efi: UEFI not found.
[    1.304678] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[    1.305813] Reserved memory: created CMA memory pool at 0x0000000010000000, size 128 MiB
[    1.306543] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
[    1.375760] Zone ranges:
[    1.375995]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    1.376554]   DMA32    empty
[    1.376815]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    1.377373] Movable zone start for each node
[    1.377756] Early memory node ranges
[    1.378078]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    1.378641]   node   0: [mem 0x0000000009400000-0x00000000efffffff]
[    1.379205]   node   0: [mem 0x00000001f0000000-0x00000001ffffffff]
[    1.379769] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[    1.402775] psci: probing for conduit method from DT.
[    1.403235] psci: PSCIv1.1 detected in firmware.
[    1.403652] psci: Using standard PSCI v0.2 function IDs
[    1.404125] psci: Trusted OS migration not required
[    1.404565] psci: SMC Calling Convention v1.2
[    1.405318] percpu: Embedded 30 pages/cpu s83800 r8192 d30888 u122880
[    1.406066] Detected VIPT I-cache on CPU0
[    1.406459] CPU features: detected: GIC system register CPU interface
[    1.407036] CPU features: detected: Virtualization Host Extensions
[    1.407594] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    1.408227] alternatives: patching kernel code
[    1.410152] Built 1 zonelists, mobility grouping on.  Total pages: 1027656
[    1.410777] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.verifiedbootstate=orange rw rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTUUID=614e0000-0000 rcupdate.rcu_expedited=1 rcu_nocbs=all androidboot.fwver=ddr-v1.15-d5483af87d,spl-v1.13,bl31-v1.44,bl32-v1.15,uboot-06/01/2024
[    1.414408] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    1.415314] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    1.416009] mem auto-init: stack:off, heap alloc:off, heap free:off
[    1.422620] software IO TLB: mapped [mem 0x00000000e9f00000-0x00000000edf00000] (64MB)
[    1.453188] Memory: 3859208K/4175872K available (18752K kernel code, 3506K rwdata, 6888K rodata, 6656K init, 590K bss, 185592K reserved, 131072K cma-reserved)
[    1.454561] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    1.455174] ftrace: allocating 57278 entries in 224 pages
[    1.524794] ftrace: allocated 224 pages with 3 groups
[    1.525463] rcu: Hierarchical RCU implementation.
[    1.525890] rcu:     RCU event tracing is enabled.
[    1.526295] rcu:     RCU dyntick-idle grace-period acceleration is enabled.
[    1.526898]     All grace periods are expedited (rcu_expedited).
[    1.527412]     Rude variant of Tasks RCU enabled.
[    1.527819] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    1.532262] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    1.535231] GICv3: GIC: Using split EOI/Deactivate mode
[    1.535705] GICv3: 480 SPIs implemented
[    1.536050] GICv3: 0 Extended SPIs implemented
[    1.536469] GICv3: Distributor has no Range Selector support
[    1.536981] GICv3: 16 PPIs implemented
[    1.537358] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    1.538057] ITS [mem 0xfe640000-0xfe65ffff]
[    1.538480] ITS@0x00000000fe640000: allocated 8192 Devices @1f01e0000 (indirect, esz 8, psz 64K, shr 0)
[    1.539343] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @1f01f0000 (flat, esz 2, psz 64K, shr 0)
[    1.540273] ITS: using cache flushing for cmd queue
[    1.540734] ITS [mem 0xfe660000-0xfe67ffff]
[    1.541145] ITS@0x00000000fe660000: allocated 8192 Devices @1f0210000 (indirect, esz 8, psz 64K, shr 0)
[    1.542009] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @1f0220000 (flat, esz 2, psz 64K, shr 0)
[    1.542938] ITS: using cache flushing for cmd queue
[    1.543580] GICv3: using LPI property table @0x00000001f0230000
[    1.544217] GIC: using cache flushing for LPI property table
[    1.544731] GICv3: CPU0: using allocated LPI pending table @0x00000001f0240000
[    1.545423] rcu:     Offload RCU callbacks from CPUs: 0-7.
[    1.651883] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    1.652439] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    1.653416] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    1.655313] Console: colour dummy device 80x25
[    1.655743] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    1.656674] pid_max: default: 32768 minimum: 301
[    1.657179] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.657856] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.659708] rcu: Hierarchical SRCU implementation.
[    1.660841] Platform MSI: msi-controller@fe640000 domain created
[    1.661394] Platform MSI: msi-controller@fe660000 domain created
[    1.662273] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[    1.663032] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[    1.663956] EFI services will not be available.
[    1.664599] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
[    1.666114] Detected VIPT I-cache on CPU1
[    1.666138] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    1.666152] GICv3: CPU1: using allocated LPI pending table @0x00000001f0250000
[    1.666189] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    1.667341] Detected VIPT I-cache on CPU2
[    1.667361] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    1.667375] GICv3: CPU2: using allocated LPI pending table @0x00000001f0260000
[    1.667408] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    1.668543] Detected VIPT I-cache on CPU3
[    1.668559] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    1.668572] GICv3: CPU3: using allocated LPI pending table @0x00000001f0270000
[    1.668603] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    1.669780] CPU features: detected: Spectre-v4
[    1.669782] CPU features: detected: Spectre-BHB
[    1.669785] Detected PIPT I-cache on CPU4
[    1.669795] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    1.669803] GICv3: CPU4: using allocated LPI pending table @0x00000001f0280000
[    1.669824] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    1.670917] Detected PIPT I-cache on CPU5
[    1.670928] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    1.670936] GICv3: CPU5: using allocated LPI pending table @0x00000001f0290000
[    1.670957] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    1.672045] Detected PIPT I-cache on CPU6
[    1.672056] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    1.672064] GICv3: CPU6: using allocated LPI pending table @0x00000001f02a0000
[    1.672085] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    1.673187] Detected PIPT I-cache on CPU7
[    1.673198] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    1.673205] GICv3: CPU7: using allocated LPI pending table @0x00000001f02b0000
[    1.673226] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    1.673275] smp: Brought up 1 node, 8 CPUs
[    1.690109] SMP: Total of 8 processors activated.
[    1.690541] CPU features: detected: Privileged Access Never
[    1.691045] CPU features: detected: LSE atomic instructions
[    1.691549] CPU features: detected: User Access Override
[    1.692029] CPU features: detected: 32-bit EL0 Support
[    1.692495] CPU features: detected: Common not Private translations
[    1.693061] CPU features: detected: RAS Extension Support
[    1.693550] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    1.694332] CPU features: detected: CRC32 instructions
[    1.694796] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    1.695425] CPU features: detected: RCpc load-acquire (LDAPR)
[    1.719838] CPU: All CPU(s) started at EL2
[    1.721377] devtmpfs: initialized
[    1.731333] Registered cp15_barrier emulation handler
[    1.731794] Registered setend emulation handler
[    1.732255] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    1.733136] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    1.734631] pinctrl core: initialized pinctrl subsystem
[    1.735265] DMI not present or invalid.
[    1.735694] NET: Registered protocol family 16
[    1.736636] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    1.737321] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    1.738400] Registered FIQ tty driver
[    1.738817] thermal_sys: Registered thermal governor 'fair_share'
[    1.738818] thermal_sys: Registered thermal governor 'step_wise'
[    1.739367] thermal_sys: Registered thermal governor 'user_space'
[    1.739906] thermal_sys: Registered thermal governor 'power_allocator'
[    1.740566] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    1.741897] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    1.742631] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
[    1.743368] thermal thermal_zone4: power_allocator: sustainable_power will be estimated
[    1.744102] thermal thermal_zone5: power_allocator: sustainable_power will be estimated
[    1.744841] thermal thermal_zone6: power_allocator: sustainable_power will be estimated
[    1.745572] cpuidle: using governor menu
[    1.746001] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    1.746690] ASID allocator initialised with 65536 entries
[    1.748338] ramoops: dmesg-0    0x18000@0x0000000000110000
[    1.748808] ramoops: dmesg-1    0x18000@0x0000000000128000
[    1.749287] ramoops: console    0x80000@0x0000000000140000
[    1.749762] ramoops: pmsg    0x30000@0x00000000001c0000
[    1.750414] printk: console [ramoops-1] enabled
[    1.750823] pstore: Registered ramoops as persistent store backend
[    1.751379] ramoops: using 0xe0000@0x110000, ecc: 0
[    1.784252] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[    1.784979] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[    1.785686] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[    1.786420] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[    1.787150] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[    1.787770] rockchip-pinctrl pinctrl: probed pinctrl
[    1.798815] fiq_debugger fiq_debugger.0: IRQ fiq not found
[    1.799318] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    1.799837] fiq_debugger_probe: could not install nmi irq handler
[[    1.800420] printk: console [ttyFIQ0] enabled
    1.800420] printk: console [ttyFIQ0] enabled
[    1.801191] printk: bootconsole [uart8250] disabled
[    1.801191] printk: bootconsole [uart8250] disabled
[    1.801674] Registered fiq debugger ttyFIQ0
[    1.801879] vcc5v0_sys: supplied by vcc12v_dcin
[    1.801949] vcc5v0_usbdcin: supplied by vcc12v_dcin
[    1.802017] vcc5v0_usb: supplied by vcc5v0_usbdcin
[    1.802087] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
[    1.802221] vbus5v0_typec: supplied by vcc5v0_usb
[    1.802293] vcc3v3_pcie30: supplied by vcc12v_dcin
[    1.802368] vcc5v0_host: supplied by vcc5v0_usb
[    1.802893] iommu: Default domain type: Translated 
[    1.805511] SCSI subsystem initialized
[    1.805564] usbcore: registered new interface driver usbfs
[    1.805573] usbcore: registered new interface driver hub
[    1.805584] usbcore: registered new device driver usb
[    1.805607] mc: Linux media interface: v0.10
[    1.805616] videodev: Linux video capture interface: v2.00
[    1.805639] pps_core: LinuxPPS API ver. 1 registered
[    1.805642] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.805647] PTP clock support registered
[    1.805659] EDAC MC: Ver: 3.0.0
[    1.805886] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    1.805913] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    1.806706] Advanced Linux Sound Architecture Driver Initialized.
[    1.806833] Bluetooth: Core ver 2.22
[    1.806841] NET: Registered protocol family 31
[    1.806844] Bluetooth: HCI device and connection manager initialized
[    1.806848] Bluetooth: HCI socket layer initialized
[    1.806851] Bluetooth: L2CAP socket layer initialized
[    1.806860] Bluetooth: SCO socket layer initialized
[    1.808087] rockchip-cpuinfo cpuinfo: SoC        : 35881000
[    1.808091] rockchip-cpuinfo cpuinfo: Serial        : a8eef7e75df20ac0
[    1.808287] clocksource: Switched to clocksource arch_sys_counter
[    2.044279] NET: Registered protocol family 2
[    2.044349] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    2.045397] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    2.045434] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    2.045595] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    2.045912] TCP: Hash tables configured (established 32768 bind 32768)
[    2.045944] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    2.046004] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    2.046100] NET: Registered protocol family 1
[    2.046265] RPC: Registered named UNIX socket transport module.
[    2.046269] RPC: Registered udp transport module.
[    2.046271] RPC: Registered tcp transport module.
[    2.046274] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.046538] PCI: CLS 0 bytes, default 64
[    2.047115] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
[    2.047533] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
[    2.048065] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    2.049508] Initialise system trusted keyrings
[    2.049548] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[    2.050735] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.050887] NFS: Registering the id_resolver key type
[    2.050894] Key type id_resolver registered
[    2.050896] Key type id_legacy registered
[    2.050908] ntfs: driver 2.1.32 [Flags: R/O].
[    2.050959] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    2.051036] fuse: init (API version 7.32)
[    2.051106] SGI XFS with security attributes, no debug enabled
[    2.071078] NET: Registered protocol family 38
[    2.071084] Key type asymmetric registered
[    2.071087] Asymmetric key parser 'x509' registered
[    2.071098] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    2.071101] io scheduler mq-deadline registered
[    2.071104] io scheduler kyber registered
[    2.071439] rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully!
[    2.071492] rockchip-csi2-dphy-hw fedc8000.csi2-dphy1-hw: csi2 dphy hw probe successfully!
[    2.077468] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
[    2.077999] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success
[    2.079982] rk-pcie fe150000.pcie: invalid prsnt-gpios property in node
[    2.080083] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node
[    2.080096] rk-pcie fe170000.pcie: no vpcie3v3 regulator found
[    2.080173] pwm-backlight backlight: supply power not found, using dummy regulator
[    2.080299] rk-pcie fe170000.pcie: IRQ msi not found
[    2.080303] rk-pcie fe170000.pcie: use outband MSI support
[    2.080307] rk-pcie fe170000.pcie: Missing *config* reg space
[    2.080314] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:
[    2.080328] rk-pcie fe170000.pcie:      err 0x00f2000000..0x00f20fffff -> 0x00f2000000
[    2.080337] rk-pcie fe170000.pcie:       IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
[    2.080346] rk-pcie fe170000.pcie:      MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
[    2.080352] rk-pcie fe170000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[    2.080372] rk-pcie fe170000.pcie: Missing *config* reg space
[    2.080378] iep: Module initialized.
[    2.080391] rk-pcie fe170000.pcie: invalid resource
[    2.080403] mpp_service mpp-srv: unknown mpp version for missing VCS info
[    2.080407] mpp_service mpp-srv: probe start
[    2.081110] mpp_vdpu1 fdb51000.avsd-plus: Adding to iommu group 1
[    2.081280] mpp_vdpu1 fdb51000.avsd-plus: probe device
[    2.081357] mpp_vdpu1 fdb51000.avsd-plus: reset_group->rw_sem_on=0
[    2.081362] mpp_vdpu1 fdb51000.avsd-plus: reset_group->rw_sem_on=0
[    2.081433] mpp_vdpu1 fdb51000.avsd-plus: probing finish
[    2.081662] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
[    2.081692] mpp_vdpu2 fdb50400.vdpu: probe device
[    2.081747] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
[    2.081751] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
[    2.081804] mpp_vdpu2 fdb50400.vdpu: probing finish
[    2.081912] mpp_vepu2 jpege-ccu: probing start
[    2.081915] mpp_vepu2 jpege-ccu: probing finish
[    2.081986] mpp_vepu2 fdb50000.vepu: Adding to iommu group 1
[    2.082012] mpp_vepu2 fdb50000.vepu: probing start
[    2.082065] mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0
[    2.082069] mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0
[    2.082123] mpp_vepu2 fdb50000.vepu: probing finish
[    2.082176] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
[    2.082241] mpp_vepu2 fdba0000.jpege-core: probing start
[    2.082312] mpp_vepu2 fdba0000.jpege-core: attach ccu success
[    2.082365] mpp_vepu2 fdba0000.jpege-core: probing finish
[    2.082401] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
[    2.082466] mpp_vepu2 fdba4000.jpege-core: probing start
[    2.082528] mpp_vepu2 fdba4000.jpege-core: attach ccu success
[    2.082582] mpp_vepu2 fdba4000.jpege-core: probing finish
[    2.082626] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
[    2.082685] mpp_vepu2 fdba8000.jpege-core: probing start
[    2.082744] mpp_vepu2 fdba8000.jpege-core: attach ccu success
[    2.082798] mpp_vepu2 fdba8000.jpege-core: probing finish
[    2.082843] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
[    2.082902] mpp_vepu2 fdbac000.jpege-core: probing start
[    2.082962] mpp_vepu2 fdbac000.jpege-core: attach ccu success
[    2.083013] mpp_vepu2 fdbac000.jpege-core: probing finish
[    2.083186] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
[    2.083248] mpp-iep2 fdbb0000.iep: probe device
[    2.083326] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[    2.083372] mpp-iep2 fdbb0000.iep: probing finish
[    2.083498] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
[    2.083617] mpp_jpgdec fdb90000.jpegd: probe device
[    2.083739] mpp_jpgdec fdb90000.jpegd: probing finish
[    2.084016] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
[    2.084054] mpp_rkvdec2 fdc30000.rkvdec-ccu: ccu-mode: 1
[    2.084057] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
[    2.084119] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
[    2.084320] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
[    2.084396] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[    2.084400] rkvdec2_init:1022: No niu aclk reset resource define
[    2.084403] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[    2.084406] rkvdec2_init:1025: No niu hclk reset resource define
[    2.084422] mpp_rkvdec2 fdc38100.rkvdec-core: no regulator, devfreq is disabled
[    2.084464] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
[    2.084467] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
[    2.084597] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000
[    2.084600] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000
[    2.084603] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
[    2.084606] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
[    2.084610] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
[    2.084614] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_info_count 20
[    2.084617] mpp_rkvdec2 fdc38100.rkvdec-core: [136, 24576]
[    2.084620] mpp_rkvdec2 fdc38100.rkvdec-core: [137, 49152]
[    2.084623] mpp_rkvdec2 fdc38100.rkvdec-core: [141, 90112]
[    2.084626] mpp_rkvdec2 fdc38100.rkvdec-core: [140, 49152]
[    2.084628] mpp_rkvdec2 fdc38100.rkvdec-core: [139, 180224]
[    2.084631] mpp_rkvdec2 fdc38100.rkvdec-core: [133, 49152]
[    2.084634] mpp_rkvdec2 fdc38100.rkvdec-core: [134, 8192]
[    2.084637] mpp_rkvdec2 fdc38100.rkvdec-core: [135, 4352]
[    2.084640] mpp_rkvdec2 fdc38100.rkvdec-core: [138, 13056]
[    2.084643] mpp_rkvdec2 fdc38100.rkvdec-core: [142, 291584]
[    2.084663] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
[    2.084712] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
[    2.084895] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
[    2.084975] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[    2.084978] rkvdec2_init:1022: No niu aclk reset resource define
[    2.084982] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[    2.084984] rkvdec2_init:1025: No niu hclk reset resource define
[    2.084997] mpp_rkvdec2 fdc48100.rkvdec-core: no regulator, devfreq is disabled
[    2.085027] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
[    2.085041] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
[    2.085189] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000
[    2.085192] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000
[    2.085195] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
[    2.085198] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
[    2.085201] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
[    2.085205] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_info_count 20
[    2.085208] mpp_rkvdec2 fdc48100.rkvdec-core: [136, 24576]
[    2.085211] mpp_rkvdec2 fdc48100.rkvdec-core: [137, 49152]
[    2.085214] mpp_rkvdec2 fdc48100.rkvdec-core: [141, 90112]
[    2.085216] mpp_rkvdec2 fdc48100.rkvdec-core: [140, 49152]
[    2.085219] mpp_rkvdec2 fdc48100.rkvdec-core: [139, 180224]
[    2.085222] mpp_rkvdec2 fdc48100.rkvdec-core: [133, 49152]
[    2.085225] mpp_rkvdec2 fdc48100.rkvdec-core: [134, 8192]
[    2.085228] mpp_rkvdec2 fdc48100.rkvdec-core: [135, 4352]
[    2.085231] mpp_rkvdec2 fdc48100.rkvdec-core: [138, 13056]
[    2.085233] mpp_rkvdec2 fdc48100.rkvdec-core: [142, 291584]
[    2.085253] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
[    2.085408] mpp_rkvenc2 rkvenc-ccu: probing start
[    2.085412] mpp_rkvenc2 rkvenc-ccu: probing finish
[    2.085831] mpp_av1dec: Adding child /av1d@fdc70000
[    2.085985] mpp_av1dec: register device av1d-master
[    2.085997] mpp_av1dec av1d-master: av1_iommu_of_xlate,784
[    2.086009] av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu
[    2.086015] mpp_av1dec av1d-master: Adding to iommu group 17
[    2.096334] rk-pcie fe150000.pcie: IRQ msi not found
[    2.096345] rk-pcie fe150000.pcie: use outband MSI support
[    2.096352] rk-pcie fe150000.pcie: Missing *config* reg space
[    2.096370] rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges:
[    2.096390] rk-pcie fe150000.pcie:      err 0x00f0000000..0x00f00fffff -> 0x00f0000000
[    2.096404] rk-pcie fe150000.pcie:       IO 0x00f0100000..0x00f01fffff -> 0x00f0100000
[    2.096418] rk-pcie fe150000.pcie:      MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000
[    2.096421] mpp_av1dec av1d-master: probing start
[    2.096433] rk-pcie fe150000.pcie:      MEM 0x0900000000..0x093fffffff -> 0x0900000000
[    2.096458] rk-pcie fe150000.pcie: Missing *config* reg space
[    2.096484] rk-pcie fe150000.pcie: invalid resource
[    2.096556] mpp_av1dec av1d-master: probing finish
[    2.096575] mpp_service mpp-srv: probe success
[    2.103457] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.103464] dma-pl330 fea10000.dma-controller:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.103985] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.103990] dma-pl330 fea30000.dma-controller:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.104530] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.104535] dma-pl330 fed10000.dma-controller:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.104977] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
[    2.105013] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
[    2.105047] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
[    2.105078] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
[    2.105108] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
[    2.105496] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    2.106047] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    2.106394] febc0000.serial: ttyS9 at MMIO 0xfebc0000 (irq = 105, base_baud = 1500000) is a 16550A
[    2.107808] rockchip-vop2 fdd90000.vop: Adding to iommu group 16
[    2.114392] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[    2.114400] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[    2.114406] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[    2.114412] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[    2.114574] [drm] failed to init overlay plane Cluster0-win1
[    2.114597] [drm] failed to init overlay plane Cluster1-win1
[    2.114620] [drm] failed to init overlay plane Cluster2-win1
[    2.114642] [drm] failed to init overlay plane Cluster3-win1
[    2.122092] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc00935e230)
[    2.122415] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[    2.122681] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc00936cdc0)
[    2.123046] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver
[    2.123302] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc00936cdc0)
[    2.123336] dw-mipi-dsi2 fde20000.dsi: [drm:dw_mipi_dsi2_bind] *ERROR* Failed to find panel or bridge: -517
[    2.129322] brd: module loaded
[    2.131239] loop: module loaded
[    2.131344] zram: Added device: zram0
[    2.131433] lkdtm: No crash points registered, enable through debugfs
[    2.131741] system_heap: orders[0] = 6
[    2.131746] system_heap: orders[1] = 4
[    2.131749] system_heap: orders[2] = 0
[    2.132481] ahci fe210000.sata: supply ahci not found, using dummy regulator
[    2.132523] ahci fe210000.sata: supply phy not found, using dummy regulator
[    2.132564] ahci fe210000.sata: supply target not found, using dummy regulator
[    2.132616] ahci fe210000.sata: forcing port_map 0x0 -> 0x1
[    2.132633] ahci fe210000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    2.132640] ahci fe210000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst 
[    2.132647] ahci fe210000.sata: port 0 can do FBS, forcing FBSCP
[    2.133010] scsi host0: ahci
[    2.133099] ata1: SATA max UDMA/133 mmio [mem 0xfe210000-0xfe210fff] port 0x100 irq 90
[    2.133959] rockchip-spi feb20000.spi: no high_speed pinctrl state
[    2.135041] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
[    2.135174] rk806 spi2.0: ON: 0x40 OFF:0x0
[    2.136488] vdd_gpu_s0: supplied by vcc5v0_sys
[    2.137445] vdd_cpu_lit_s0: supplied by vcc5v0_sys
[    2.137981] vdd_log_s0: supplied by vcc5v0_sys
[    2.138487] vdd_vdenc_s0: supplied by vcc5v0_sys
[    2.139024] vdd_ddr_s0: supplied by vcc5v0_sys
[    2.139331] vdd2_ddr_s3: supplied by vcc5v0_sys
[    2.139815] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
[    2.140245] vcc_3v3_s3: supplied by vcc5v0_sys
[    2.140662] vddq_ddr_s0: supplied by vcc5v0_sys
[    2.141142] vcc_1v8_s3: supplied by vcc5v0_sys
[    2.141670] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
[    2.142178] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
[    2.142616] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    2.143051] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
[    2.143487] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    2.144002] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    2.144569] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    2.145074] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
[    2.145544] vcc_3v3_s0: supplied by vcc5v0_sys
[    2.145964] vccio_sd_s0: supplied by vcc5v0_sys
[    2.146389] pldo6_s3: supplied by vcc5v0_sys
[    2.146582] rk806 spi2.0: no sleep-setting state
[    2.146586] rk806 spi2.0: no reset-setting pinctrl state
[    2.146590] rk806 spi2.0: no dvs-setting pinctrl state
[    2.147816] rockchip-spi feb20000.spi: probed, poll=0, rsd=0, cs-inactive=0, ready=0
[    2.149045] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found
[    2.149167] rk_gmac-dwmac fe1c0000.ethernet: supply phy not found, using dummy regulator
[    2.149209] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (output).
[    2.149214] rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x43).
[    2.149218] rk_gmac-dwmac fe1c0000.ethernet: Can not read property: rx_delay.
[    2.149222] rk_gmac-dwmac fe1c0000.ethernet: set rx_delay to 0xffffffff
[    2.149235] rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).
[    2.149240] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_rx
[    2.149245] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_tx
[    2.149254] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock clk_mac_speed
[    2.149466] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID
[    2.149521] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    2.149525] rk_gmac-dwmac fe1c0000.ethernet:     DWMAC4/5
[    2.149530] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported
[    2.149534] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported
[    2.149537] rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported
[    2.149541] rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported
[    2.149563] rk_gmac-dwmac fe1c0000.ethernet: TSO supported
[    2.149567] rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.149571] rk_gmac-dwmac fe1c0000.ethernet: Enabled Flow TC (entries=2)
[    2.149575] rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled
[    2.149579] rk_gmac-dwmac fe1c0000.ethernet: Using 32 bits DMA width
[    2.281840] mdio_bus stmmac-1: MDIO device at address 1 is missing.
[    2.282552] usbcore: registered new interface driver rtl8150
[    2.282566] usbcore: registered new interface driver r8152
[    2.286069] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.293449] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.293493] ehci-pci: EHCI PCI platform driver
[    2.293553] ehci-platform: EHCI generic platform driver
[    2.295919] ehci-platform fc800000.usb: EHCI Host Controller
[    2.296046] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1
[    2.296160] ehci-platform fc800000.usb: irq 20, io mem 0xfc800000
[    2.302765] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    2.308302] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[    2.308451] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.308463] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.308472] usb usb1: Product: EHCI Host Controller
[    2.308480] usb usb1: Manufacturer: Linux 5.10.198 ehci_hcd
[    2.308488] usb usb1: SerialNumber: fc800000.usb
[    2.308832] hub 1-0:1.0: USB hub found
[    2.308863] hub 1-0:1.0: 1 port detected
[    2.311511] ehci-platform fc880000.usb: EHCI Host Controller
[    2.311625] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.311646] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
[    2.311731] ehci-platform fc880000.usb: irq 22, io mem 0xfc880000
[    2.324981] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
[    2.325116] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.325128] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.325137] usb usb2: Product: EHCI Host Controller
[    2.325146] usb usb2: Manufacturer: Linux 5.10.198 ehci_hcd
[    2.325154] usb usb2: SerialNumber: fc880000.usb
[    2.325470] hub 2-0:1.0: USB hub found
[    2.325502] hub 2-0:1.0: 1 port detected
[    2.326219] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.326238] ohci-platform: OHCI generic platform driver
[    2.326489] ohci-platform fc840000.usb: Generic Platform OHCI controller
[    2.326608] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
[    2.326690] ohci-platform fc840000.usb: irq 21, io mem 0xfc840000
[    2.328309] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    2.338290] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.354972] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x1
[    2.364956] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.381648] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    2.385759] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.385779] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.385789] usb usb3: Product: Generic Platform OHCI controller
[    2.385797] usb usb3: Manufacturer: Linux 5.10.198 ohci_hcd
[    2.385805] usb usb3: SerialNumber: fc840000.usb
[    2.386131] hub 3-0:1.0: USB hub found
[    2.386164] hub 3-0:1.0: 1 port detected
[    2.386640] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
[    2.386776] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4
[    2.386868] ohci-platform fc8c0000.usb: irq 23, io mem 0xfc8c0000
[    2.391623] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.408312] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    2.444594] ata1: SATA link down (SStatus 0 SControl 300)
[    2.445755] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.445773] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.445783] usb usb4: Product: Generic Platform OHCI controller
[    2.445791] usb usb4: Manufacturer: Linux 5.10.198 ohci_hcd
[    2.445800] usb usb4: SerialNumber: fc8c0000.usb
[    2.446120] hub 4-0:1.0: USB hub found
[    2.446150] hub 4-0:1.0: 1 port detected
[    2.447196] phy phy-fd5d4000.syscon:usb2-phy@4000.3: illegal mode
[    2.447214] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    2.447334] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
[    2.447454] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000800002010010
[    2.447492] xhci-hcd xhci-hcd.5.auto: irq 149, io mem 0xfc400000
[    2.447608] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    2.447722] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
[    2.447739] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
[    2.447839] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.447850] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.447859] usb usb5: Product: xHCI Host Controller
[    2.447867] usb usb5: Manufacturer: Linux 5.10.198 xhci-hcd
[    2.447875] usb usb5: SerialNumber: xhci-hcd.5.auto
[    2.448190] hub 5-0:1.0: USB hub found
[    2.448221] hub 5-0:1.0: 1 port detected
[    2.448534] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.448618] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    2.448630] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.448638] usb usb6: Product: xHCI Host Controller
[    2.448647] usb usb6: Manufacturer: Linux 5.10.198 xhci-hcd
[    2.448655] usb usb6: SerialNumber: xhci-hcd.5.auto
[    2.448975] hub 6-0:1.0: USB hub found
[    2.449005] hub 6-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    2.449239] usbcore: registered new interface driver cdc_acm
[    2.449248] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.449393] usbcore: registered new interface driver uas
[    2.449485] usbcore: registered new interface driver usb-storage
[    2.449551] usbcore: registered new interface driver usbserial_generic
[    2.449573] usbserial: USB Serial support registered for generic
[    2.449610] usbcore: registered new interface driver cp210x
[    2.449633] usbserial: USB Serial support registered for cp210x
[    2.449695] usbcore: registered new interface driver ftdi_sio
[    2.449717] usbserial: USB Serial support registered for FTDI USB Serial Device
[    2.449845] usbcore: registered new interface driver keyspan
[    2.449867] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    2.449887] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    2.449908] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    2.449927] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    2.449966] usbcore: registered new interface driver option
[    2.449990] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.450178] usbcore: registered new interface driver oti6858
[    2.450201] usbserial: USB Serial support registered for oti6858
[    2.450238] usbcore: registered new interface driver pl2303
[    2.450258] usbserial: USB Serial support registered for pl2303
[    2.450304] usbcore: registered new interface driver qcserial
[    2.450326] usbserial: USB Serial support registered for Qualcomm USB modem
[    2.450376] usbcore: registered new interface driver sierra
[    2.450397] usbserial: USB Serial support registered for Sierra USB modem
[    2.451295] usbcore: registered new interface driver usbtouchscreen
[    2.452667] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.3.auto/input/input0
[    2.453113] i2c /dev entries driver
[    2.457132] vdd_cpu_big0_s0: supplied by vcc5v0_sys
[    2.465967] vdd_cpu_big1_s0: supplied by vcc5v0_sys
[    2.475670] vdd_npu_s0: supplied by vcc5v0_sys
[    2.483430] i2c i2c-4: 1 i2c clients have been registered at 0x68
[    2.486145] husb311 6-004e: vid is not correct, 0x0000
[    2.486153] husb311 6-004e: check vid/pid fail(-19)
[    2.488391] rtc-hym8563 6-0051: rtc information is valid
[    2.492648] rtc-hym8563 6-0051: registered as rtc0
[    2.493830] rtc-hym8563 6-0051: hctosys: unable to read the hardware clock
[    2.496476] ircut cam_ircut: driver version: 00.01.00
[    2.496559] ircut cam_ircut: failed get pulse-width,use dafult value 100
[    2.496604] ircut cam_ircut: Failed to get ircut-open-gpios
[    2.496611] ircut cam_ircut: Failed to get ircut-close-gpios
[    2.496623] ircut cam_ircut: probe successful!
[    2.497009] rkcifhw fdce0000.rkcif: Adding to iommu group 15
[    2.497805] rkcifhw fdce0000.rkcif: No reserved memory region assign to CIF
[    2.497863] rkcif rkcif-mipi-lvds2: Adding to iommu group 15
[    2.497872] rkcif rkcif-mipi-lvds2: rkcif driver version: v00.02.00
[    2.497911] rkcif rkcif-mipi-lvds2: attach to cif hw node
[    2.497915] rkcif rkcif-mipi-lvds2: rkcif wait line 0
[    2.497921] : terminal subdev does not exist
[    2.497924] : terminal subdev does not exist
[    2.497927] : terminal subdev does not exist
[    2.497930] : terminal subdev does not exist
[    2.497934] : get_remote_sensor: video pad[0] is null
[    2.497938] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    2.497942] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[    2.497946] : get_remote_sensor: video pad[0] is null
[    2.497949] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    2.497952] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[    2.497955] : get_remote_sensor: video pad[0] is null
[    2.497958] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    2.497961] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[    2.497964] : get_remote_sensor: video pad[0] is null
[    2.497967] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    2.497970] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[    2.498450] rkcif rkcif-mipi-lvds2: No memory-region-thunderboot specified
[    2.499052] rockchip-mipi-csi2-hw fdd10000.mipi0-csi2-hw: enter mipi csi2 hw probe!
[    2.499106] rockchip-mipi-csi2-hw fdd10000.mipi0-csi2-hw: probe success, v4l2_dev:mipi0-csi2-hw!
[    2.499128] rockchip-mipi-csi2-hw fdd20000.mipi1-csi2-hw: enter mipi csi2 hw probe!
[    2.499164] rockchip-mipi-csi2-hw fdd20000.mipi1-csi2-hw: probe success, v4l2_dev:mipi1-csi2-hw!
[    2.499185] rockchip-mipi-csi2-hw fdd30000.mipi2-csi2-hw: enter mipi csi2 hw probe!
[    2.499218] rockchip-mipi-csi2-hw fdd30000.mipi2-csi2-hw: probe success, v4l2_dev:mipi2-csi2-hw!
[    2.499239] rockchip-mipi-csi2-hw fdd40000.mipi3-csi2-hw: enter mipi csi2 hw probe!
[    2.499271] rockchip-mipi-csi2-hw fdd40000.mipi3-csi2-hw: probe success, v4l2_dev:mipi3-csi2-hw!
[    2.499290] rockchip-mipi-csi2-hw fdd50000.mipi4-csi2-hw: enter mipi csi2 hw probe!
[    2.499322] rockchip-mipi-csi2-hw fdd50000.mipi4-csi2-hw: probe success, v4l2_dev:mipi4-csi2-hw!
[    2.499342] rockchip-mipi-csi2-hw fdd60000.mipi5-csi2-hw: enter mipi csi2 hw probe!
[    2.499372] rockchip-mipi-csi2-hw fdd60000.mipi5-csi2-hw: probe success, v4l2_dev:mipi5-csi2-hw!
[    2.499693] rockchip-mipi-csi2 mipi2-csi2: attach to csi2 hw node
[    2.499710] rkcif rkcif-mipi-lvds2: Entity type for entity rockchip-mipi-csi2 was not initialized!
[    2.499715] rockchip-mipi-csi2: Async registered subdev
[    2.499720] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds2!
[    2.500340] rkisp_hw fdcb0000.rkisp: Adding to iommu group 14
[    2.500476] rkisp_hw fdcb0000.rkisp: is_thunderboot: 0
[    2.500481] rkisp_hw fdcb0000.rkisp: Missing rockchip,grf property
[    2.500493] rkisp_hw fdcb0000.rkisp: max input:0x0@0fps
[    2.500546] rkisp_hw fdcb0000.rkisp: no find phandle sram
[    2.500728] rkisp rkisp0-vir0: rkisp driver version: v02.04.00
[    2.500781] rkisp rkisp0-vir0: No memory-region-thunderboot specified
[    2.500828] rkisp rkisp0-vir0: Entity type for entity rkisp-isp-subdev was not initialized!
[    2.501850] rk_hdmirx fdee0000.hdmirx-controller: No reserved memory for HDMIRX, use default CMA
[    2.501873] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_probe: cpu_aff:0x500, Bound_cpu:5, wdt_cfg_bound_cpu:6, phy_cpuid:5
[    2.502352] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_interrupts_setup: 0
[    2.502923] rk_hdmirx fdee0000.hdmirx-controller: rk_hdmirx_hdcp_register success
[    2.502943] rk_hdmirx fdee0000.hdmirx-controller: fdee0000.hdmirx-controller driver probe ok!
[    2.503018] usbcore: registered new interface driver uvcvideo
[    2.503021] USB Video Class driver (1.1.1)
[    2.503605] Bluetooth: HCI UART driver ver 2.3
[    2.503610] Bluetooth: HCI UART protocol H4 registered
[    2.503613] Bluetooth: HCI UART protocol ATH3K registered
[    2.503630] usbcore: registered new interface driver bfusb
[    2.503646] usbcore: registered new interface driver btusb
[    2.504381] cpu cpu0: bin=0
[    2.504592] cpu cpu0: leakage=15
[    2.505993] cpu cpu0: pvtm=1479
[    2.506107] cpu cpu0: pvtm-volt-sel=3
[    2.507956] cpu cpu4: bin=0
[    2.508163] cpu cpu4: leakage=13
[    2.514591] cpu cpu4: pvtm=1715
[    2.518490] cpu cpu4: pvtm-volt-sel=5
[    2.521090] cpu cpu6: bin=0
[    2.521297] cpu cpu6: leakage=13
[    2.527747] cpu cpu6: pvtm=1734
[    2.531667] cpu cpu6: pvtm-volt-sel=5
[    2.533372] cpu cpu0: avs=0
[    2.534334] cpu cpu4: avs=0
[    2.535136] cpu cpu6: avs=0
[    2.535311] cpu cpu0: EM: created perf domain
[    2.535339] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
[    2.535869] cpu cpu4: EM: created perf domain
[    2.535892] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    2.544345] cpu cpu6: EM: created perf domain
[    2.544673] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    2.558561] sdhci: Secure Digital Host Controller Interface driver
[    2.558582] sdhci: Copyright(c) Pierre Ossman
[    2.558587] Synopsys Designware Multimedia Card Interface Driver
[    2.559157] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.559392] dwmmc_rockchip fe2d0000.mmc: No normal pinctrl state
[    2.559399] dwmmc_rockchip fe2d0000.mmc: No idle pinctrl state
[    2.559511] dwmmc_rockchip fe2d0000.mmc: IDMAC supports 32-bit address mode.
[    2.559527] dwmmc_rockchip fe2d0000.mmc: Using internal DMA controller.
[    2.559535] dwmmc_rockchip fe2d0000.mmc: Version ID is 270a
[    2.559551] dwmmc_rockchip fe2c0000.mmc: No normal pinctrl state
[    2.559559] dwmmc_rockchip fe2c0000.mmc: No idle pinctrl state
[    2.559562] dwmmc_rockchip fe2d0000.mmc: DW MMC controller at irq 92,32 bit host data width,256 deep fifo
[    2.559680] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[    2.559703] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[    2.559712] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[    2.559736] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 91,32 bit host data width,256 deep fifo
[    2.560446] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    2.560494] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    2.561295] dwmmc_rockchip fe2d0000.mmc: allocated mmc-pwrseq
[    2.561307] mmc_host mmc2: card is non-removable.
[    2.561329] cryptodev: driver 1.12 loaded.
[    2.561381] hid: raw HID events driver (C) Jiri Kosina
[    2.561600] usbcore: registered new interface driver usbhid
[    2.561605] usbhid: USB HID core driver
[    2.566253] dwmmc_rockchip fe2c0000.mmc: Failed getting OCR mask: -22
[    2.569367] dwmmc_rockchip fe2c0000.mmc: could not set regulator OCR (-22)
[    2.569374] dwmmc_rockchip fe2c0000.mmc: failed to enable vmmc regulator
[    2.578500] optee: probing for conduit method.
[    2.578522] optee: revision 3.13 (62aa10b7)
[    2.578851] optee: dynamic shared memory is enabled
[    2.578932] optee: initialized driver
[    2.579424] usbcore: registered new interface driver snd-usb-audio
[    2.580235] ES8323 7-0011: i2c recv Failed
[    2.581847] rockchip-i2s-tdm fddf0000.i2s: CLK-ALWAYS-ON: mclk: 12288000, bclk: 3072000, fsync: 48000
[    2.585377] rockchip-i2s-tdm fddf4000.i2s: CLK-ALWAYS-ON: mclk: 12288000, bclk: 3072000, fsync: 48000
[    2.589172] debugfs: File 'Capture' in directory 'dapm' already present!
[    2.595192] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
[    2.596757] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.601400] input: rockchip,hdmiin rockchip,hdmiin as /devices/platform/hdmiin-sound/sound/card0/input1
[    2.602243] Initializing XFRM netlink socket
[    2.602391] NET: Registered protocol family 10
[    2.602719] Segment Routing with IPv6
[    2.602745] NET: Registered protocol family 17
[    2.602752] NET: Registered protocol family 15
[    2.602877] Bluetooth: RFCOMM socket layer initialized
[    2.602886] Bluetooth: RFCOMM ver 1.11
[    2.602891] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.602895] Bluetooth: HIDP socket layer initialized
[    2.602914] [BT_RFKILL]: Enter rfkill_rk_init
[    2.602918] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    2.603134] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    2.603149] [WLAN_RFKILL]: can't find rockchip,grf property
[    2.603152] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6398s
[    2.603155] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    2.603158] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    2.603169] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,poweren_gpio = 20 flags = 0.
[    2.603179] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 10, flags = 0.
[    2.603184] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    2.603187] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    2.603191] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[    2.603194] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    2.603568] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 148.
[    2.603579] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 22.
[    2.603599] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 21.
[    2.603606] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 0.
[    2.603630] [BT_RFKILL]: Request irq for bt wakeup host
[    2.603662] [BT_RFKILL]: ** disable irq
[    2.603694] [BT_RFKILL]: bt_default device registered.
[    2.603725] Key type dns_resolver registered
[    2.604311] imx415 3-001a: driver version: 00.01.08
[    2.604325] imx415 3-001a:  Get hdr mode failed! no hdr default
[    2.604333] imx415 3-001a: detect imx415 lane 4
[    2.604347] imx415 3-001a: Failed to get reset-gpios
[    2.604355] imx415 3-001a: Failed to get power-gpios
[    2.604359] imx415 3-001a: could not get default pinstate
[    2.604362] imx415 3-001a: could not get sleep pinstate
[    2.607371] imx415 3-001a: supply dvdd not found, using dummy regulator
[    2.607428] imx415 3-001a: supply dovdd not found, using dummy regulator
[    2.631306] mmc0: Host Software Queue enabled
[    2.631328] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    2.631576] mmcblk0: mmc0:0001 A3A55B 28.9 GiB 
[    2.631681] mmcblk0boot0: mmc0:0001 A3A55B partition 1 4.00 MiB
[    2.631770] mmcblk0boot1: mmc0:0001 A3A55B partition 2 4.00 MiB
[    2.631850] mmcblk0rpmb: mmc0:0001 A3A55B partition 3 16.0 MiB, chardev (236:0)
[    2.634028]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    2.682381] imx415 3-001a: Unexpected sensor id(000000), ret(-5)
[    2.683358] Loading compiled-in X.509 certificates
[    2.684212] pstore: Using crash dump compression: deflate
[    2.684704] rga3_core0 fdb60000.rga: Adding to iommu group 2
[    2.684940] rga: rga3_core0, irq = 36, match scheduler
[    2.685627] rga: rga3_core0 hardware loaded successfully, hw_version:3.0.76831.
[    2.685684] rga: rga3_core0 probe successfully
[    2.686274] rga3_core1 fdb70000.rga: Adding to iommu group 3
[    2.686493] rga: rga3_core1, irq = 37, match scheduler
[    2.686884] rga: rga3_core1 hardware loaded successfully, hw_version:3.0.76831.
[    2.686939] rga: rga3_core1 probe successfully
[    2.687352] rga: rga2, irq = 38, match scheduler
[    2.687743] rga: rga2 hardware loaded successfully, hw_version:3.2.63318.
[    2.687784] rga: rga2 probe successfully
[    2.688049] rga_iommu: IOMMU binding successfully, default mapping core[0x1]
[    2.688317] rga: Module initialized. v1.3.1
[    2.710345] mali fb000000.gpu: Kernel DDK version g18p0-01eac0
[    2.711039] mali fb000000.gpu: bin=0
[    2.711267] mali fb000000.gpu: leakage=21
[    2.711303] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
[    2.712765] mali fb000000.gpu: pvtm=874
[    2.712912] mali fb000000.gpu: pvtm-volt-sel=3
[    2.713874] vendor storage:20190527 ret = 0
[    2.714051] mali fb000000.gpu: avs=0
[    2.714082] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 143; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[    2.714399] mali fb000000.gpu: r0p0 status 5 not found in HW issues table;
[    2.714409] mali fb000000.gpu: falling back to closest match: r0p0 status 0
[    2.714415] mali fb000000.gpu: Execution proceeding normally with fallback match
[    2.714422] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
[    2.714474] mali fb000000.gpu: No priority control manager is configured
[    2.714593] mali fb000000.gpu: No memory group manager is configured
[    2.714616] mali fb000000.gpu: Protected memory allocator not available
[    2.715355] mali fb000000.gpu: Capping CSF_FIRMWARE_TIMEOUT to CSF_FIRMWARE_PING_TIMEOUT
[    2.715793] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[    2.716887] mali fb000000.gpu: Probed as mali0
[    2.778721] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.791864] pcie20_avdd0v85: supplied by vdd_0v85_s0
[    2.792950] pcie20_avdd1v8: supplied by avcc_1v8_s0
[    2.794078] pcie30_avdd0v75: supplied by avdd_0v75_s0
[    2.795011] pcie30_avdd1v8: supplied by avcc_1v8_s0
[    2.796123] vcc3v3_lcd0_n: supplied by vcc_1v8_s0
[    2.797854] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
[    2.798437] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
[    2.801022] mpp_rkvenc2 fdbd0000.rkvenc-core: bin=0
[    2.801403] mpp_rkvenc2 fdbd0000.rkvenc-core: leakage=18
[    2.801429] mpp_rkvenc2 fdbd0000.rkvenc-core: leakage-volt-sel=1
[    2.802317] mpp_rkvenc2 fdbd0000.rkvenc-core: avs=0
[    2.802385] mpp_rkvenc2 fdbd0000.rkvenc-core: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[    2.803970] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
[    2.804858] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
[    2.805500] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
[    2.806252] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
[    2.809679] mpp_rkvenc2 fdbe0000.rkvenc-core: bin=0
[    2.810041] mpp_rkvenc2 fdbe0000.rkvenc-core: leakage=18
[    2.810075] mpp_rkvenc2 fdbe0000.rkvenc-core: leakage-volt-sel=1
[    2.810926] mpp_rkvenc2 fdbe0000.rkvenc-core: avs=0
[    2.810989] mpp_rkvenc2 fdbe0000.rkvenc-core: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[    2.813504] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
[    2.813717] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
[    2.814705] rockchip-dmc dmc: bin=0
[    2.814876] rockchip-dmc dmc: leakage=44
[    2.814885] rockchip-dmc dmc: leakage-volt-sel=1
[    2.814894] rockchip-dmc dmc: soc version=0, speed=1
[    2.815650] rockchip-dmc dmc: avs=0
[    2.815659] rockchip-dmc dmc: current ATF version 0x100
[    2.815724] rockchip-dmc dmc: normal_rate = 1560000000
[    2.815731] rock[chip-dmc dmc: reboot_rate = 2112000000
[    2.815736] rockchip-dmc dmc: suspend_rate = 528000000
[    2.815741] rockchip-dmc dmc: video_4k_rate = 1560000000
[    2.815746] rockchip-dmc dmc: video_4k_10b_rate = 1560000000
[    2.815751] rockchip-dmc dmc: video_svep_rate = 1560000000
[    2.815756] rockchip-dmc dmc: boost_rate = 2112000000
[    2.815760] rockchip-dmc dmc: fixed_rate(isp|cif0|cif1|dualview) = 2112000000
[    2.815765] rockchip-dmc dmc: performance_rate = 2112000000
[    2.815770] rockchip-dmc dmc: hdmirx_rate = 2112000000
[    2.815775] rockchip-dmc dmc: deep_suspend_rate = 2112000000
[    2.815782] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
[    2.815786] rockchip-dmc dmc: failed to get vop pn to msch rl
[    2.815865] rockchip-dmc dmc: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.817373] rockchip-dmc dmc: could not find power_model node
ddr_m0]E: waiting_vop_line_flag-1958: vop_post=0 unsupported!
[    2.827461] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully!
[    2.835098] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[    2.835134] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[    2.835148] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[    2.835161] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[    2.835583] [drm] failed to init overlay plane Cluster0-win1
[    2.835640] [drm] failed to init overlay plane Cluster1-win1
[    2.835693] [drm] failed to init overlay plane Cluster2-win1
[    2.835745] [drm] failed to init overlay plane Cluster3-win1
[    2.858179] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc00935e230)
[    2.859394] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[    2.860551] dw-hdmi-qp-hdcp dw-hdmi-qp-hdcp.10.auto: dw_hdcp_qp_hdcp_probe success
[    2.860649] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc00936cdc0)
[    2.861734] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver
[    2.862761] dw-hdmi-qp-hdcp dw-hdmi-qp-hdcp.13.auto: dw_hdcp_qp_hdcp_probe success
[    2.862850] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc00936cdc0)
[    2.862880] dw-mipi-dsi2 fde20000.dsi: [drm:dw_mipi_dsi2_bind] *ERROR* Failed to find panel or bridge: -517
[    2.870927] input: adc-keys as /devices/platform/adc-keys/input/input2
[    2.871532] <<GTP-INF>>[gt1x_ts_probe:560] GTP Driver Version: V1.4<2015/07/10>
[    2.871539] <<GTP-INF>>[gt1x_ts_probe:561] GTP I2C Address: 0x14
[    2.871593] <<GTP-ERR>>[gt1x_parse_dt:341] vdd_ana not specified, fallback to power-supply
[    2.871733] <<GTP-INF>>[gt1x_parse_dt:348] Power Invert,no 
[    2.873323] <<GTP-INF>>[gt1x_reset_guitar:788] GTP RESET!
[    2.876459] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[    2.876476] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[    2.876484] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[    2.876492] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[    2.876730] [drm] failed to init overlay plane Cluster0-win1
[    2.876761] [drm] failed to init overlay plane Cluster1-win1
[    2.876791] [drm] failed to init overlay plane Cluster2-win1
[    2.876821] [drm] failed to init overlay plane Cluster3-win1
[    2.891750] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc00935e230)
[    2.892982] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[    2.894106] dw-hdmi-qp-hdcp dw-hdmi-qp-hdcp.10.auto: dw_hdcp_qp_hdcp_probe success
[    2.894183] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc00936cdc0)
[    2.895272] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver
[    2.896462] dw-hdmi-qp-hdcp dw-hdmi-qp-hdcp.13.auto: dw_hdcp_qp_hdcp_probe success
[    2.896565] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc00936cdc0)
[    2.896658] rockchip-drm display-subsystem: bound fde20000.dsi (ops 0xffffffc00936f5d8)
[    2.896927] rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffffffc00936f968)
[    2.897029] rockchip-drm display-subsystem: bound fde60000.dp (ops 0xffffffc00936f968)
[    3.041037] dwhdmi-rockchip fde80000.hdmi: i2c read err!
[    3.041063] dwhdmi-rockchip fde80000.hdmi: get hdcp1.4 capable failed:-5
[    3.041869] dwhdmi-rockchip fde80000.hdmi: i2c read err!
[    3.041890] dwhdmi-rockchip fde80000.hdmi: get hdcp2.x capable failed:-5
[ddr_m0]E: waiting_vop_line_flag-1958: vop_post=0 unsupported!
[    3.044764] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    3.045194] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    3.045713] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    3.046236] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    3.046563] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    3.046881] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    3.046892] dwhdmi-rockchip fdea0000.hdmi: get hdcp2.x capable failed:-5
[    3.046904] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[    3.047011] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    3.047024] dwhdmi-rockchip fdea0000.hdmi: use tmds mode
[    3.047356] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    3.047396] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    3.047409] dwhdmi-rockchip fdea0000.hdmi: use tmds mode
[    3.097494] rockchip-vop2 fdd90000.vop: [drm:vop2_setup_layer_mixer_for_vp] *ERROR* wait layer cfg done timeout: 0x75643102--0x75641302
[    3.100012] dwhdmi-rockchip fde80000.hdmi: i2c read err!
[    3.100039] dwhdmi-rockchip fde80000.hdmi: get hdcp1.4 capable failed:-5
[    3.100464] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    3.100900] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    3.101419] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    3.101842] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    3.102169] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    3.102484] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    3.102802] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    3.102812] dwhdmi-rockchip fdea0000.hdmi: get hdcp2.x capable failed:-5
[    3.102823] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[    3.133792] dw-dp fde60000.dp: aux failed to read dpcd: -110
[    3.146622] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
[    3.148316] rk3x-i2c fead0000.i2c: timeout, ipd: 0x90, state: 3
[    3.148363] rk3x-i2c fead0000.i2c: SCL hold by slave, check your device.
[    3.148377] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    3.148386] <<GTP-ERR>>[gt1x_init:2319] Reset guitar failed!
[    3.148393] <<GTP-INF>>[gt1x_reset_guitar:788] GTP RESET!
[    3.302505] dwmmc_rockchip fe2d0000.mmc: Busy; trying anyway
[    3.421757] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[    3.421780] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    3.421790] <<GTP-ERR>>[gt1x_init:2319] Reset guitar failed!
[    3.421797] <<GTP-INF>>[gt1x_reset_guitar:788] GTP RESET!
[    3.695212] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[    3.695238] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    3.695247] <<GTP-ERR>>[gt1x_init:2319] Reset guitar failed!
[    3.695254] <<GTP-INF>>[gt1x_reset_guitar:788] GTP RESET!
[    3.802516] mmc_host mmc2: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
[    3.803928] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
[    3.806442] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card1/input3
[    3.808630] input: rockchip-hdmi1 rockchip-hdmi1 as /devices/platform/hdmi1-sound/sound/card2/input4
[    3.812401] rkcif rkcif-mipi-lvds2: clear unready subdev num: 1
[    3.812951] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    3.812964] rkcif-mipi-lvds2: Async subdev notifier completed
[    3.812975] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    3.812979] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
[    3.813031] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    3.813038] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
[    3.813934] RKNPU fdab0000.npu: Adding to iommu group 0
[    3.814042] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[    3.815238] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[    3.815255] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[    3.815266] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[    3.815792] [drm] Initialized rknpu 0.9.3 20231121 for fdab0000.npu on minor 1
[    3.818920] RKNPU fdab0000.npu: RKNPU: bin=0
[    3.819124] RKNPU fdab0000.npu: leakage=11
[    3.819158] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
[    3.825950] RKNPU fdab0000.npu: pvtm=874
[    3.830485] RKNPU fdab0000.npu: pvtm-volt-sel=3
[    3.831332] RKNPU fdab0000.npu: avs=0
[    3.831441] RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[    3.841782] RKNPU fdab0000.npu: failed to find power_model node
[    3.841794] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[    3.841798] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
[    3.842688] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.844656] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.844805] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.844812] cfg80211: failed to load regulatory.db
[    3.845698] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[    3.846024] rockchip-suspend not set sleep-mode-config for mem-lite
[    3.846029] rockchip-suspend not set wakeup-config for mem-lite
[    3.846035] rockchip-suspend not set sleep-mode-config for mem-ultra
[    3.846039] rockchip-suspend not set wakeup-config for mem-ultra
[    3.847007] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 406; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '15:27:31', on 'Jun  1 2024'.
[    3.847374] Mali: 
[    3.847376] Mali device driver loaded
[    3.847387] rkisp rkisp0-vir0: clear unready subdev num: 1
[    3.847594] rkisp0-vir0: Async subdev notifier completed
[    3.847603] ALSA device list:
[    3.847608]   #0: rockchip,hdmiin
[    3.847612]   #1: rockchip-hdmi0
[    3.847615]   #2: rockchip-hdmi1
[    3.968662] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[    3.968745] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    3.968767] <<GTP-ERR>>[gt1x_init:2319] Reset guitar failed!
[    3.968784] <<GTP-INF>>[gt1x_reset_guitar:788] GTP RESET!
[    4.021780] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    4.241754] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[    4.241780] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    4.241790] <<GTP-ERR>>[gt1x_init:2319] Reset guitar failed!
[    4.241797] <<GTP-ERR>>[gt1x_init:2345] Init failed, use default setting
[    4.445088] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[    4.445112] <<GTP-ERR>>[_do_i2c_read:390] I2c Transfer error! (-110)
[    4.445122] <<GTP-ERR>>[gt1x_get_chip_type:895] I2c communication error.
[    4.445129] <<GTP-ERR>>[gt1x_init:2355] Get chip type failed!
[    4.546046] dwmmc_rockchip fe2d0000.mmc: Busy; trying anyway
[    4.651798] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[    4.651822] <<GTP-ERR>>[_do_i2c_read:390] I2c Transfer error! (-110)
[    4.651832] <<GTP-ERR>>[gt1x_read_version:845] Read version failed!
[    4.702775] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
[    4.955076] rk-pcie fe170000.pcie: PCIe Link Fail, LTSSM is 0x3, hw_retries=0
[    4.965086] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[    4.965110] <<GTP-ERR>>[_do_i2c_read:390] I2c Transfer error! (-110)
[    4.965120] <<GTP-ERR>>[gt1x_read_version:845] Read version failed!
[    4.971684] rk-pcie fe150000.pcie: PCIe Link Fail, LTSSM is 0x0, hw_retries=0
[    4.971695] rk-pcie fe150000.pcie: failed to initialize host
[    5.046058] mmc_host mmc2: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
[    5.265243] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[    5.278424] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[    5.278449] <<GTP-ERR>>[_do_i2c_read:390] I2c Transfer error! (-110)
[    5.278459] <<GTP-ERR>>[gt1x_read_version:845] Read version failed!
[    5.385147] <<GTP-INF>>[gt1x_read_version:863] IC VERSION:GT_000000(Patch)_0000(Mask)_00(SensorID)
[    5.385169] <<GTP-INF>>[gt1x_init_panel:606] Config group0 used, length:239
[    5.385176] <<GTP-INF>>[gt1x_init_panel:657] X_MAX=4096,Y_MAX=4096,TRIGGER=0x01,WAKEUP_LEVEL=1
[    5.625020] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 2
[    5.625031] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    5.792610] dwmmc_rockchip fe2d0000.mmc: Busy; trying anyway
[    5.865064] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 2
[    5.865075] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    6.105016] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 2
[    6.105027] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    6.292620] mmc_host mmc2: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
[    6.345018] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 2
[    6.345029] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    6.511905] mmc_host mmc2: Bus speed (slot 0) = 187500Hz (slot req 100000Hz, actual 93750HZ div = 1)
[    6.585163] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 2
[    6.585246] <<GTP-ERR>>[_do_i2c_write:432] I2c transfer error! (-110)
[    6.585266] <<GTP-ERR>>[gt1x_send_cfg:551] Send config failed!
[    6.585284] <<GTP-ERR>>[gt1x_init:2367] Init panel failed.
[    6.586618] <<GTP-ERR>>[gt1x_ts_probe:587] GTP init failed!!!
[    6.586802] Goodix-TS-GT1X: probe of 5-0014 failed with error -2147483644
[    6.624742] EXT4-fs (mmcblk0p6): recovery complete
[    6.624879] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[    6.624921] VFS: Mounted root (ext4 filesystem) on device 179:6.
[    6.625035] devtmpfs: mounted
[    6.631756] Freeing unused kernel memory: 6656K
[    7.051372] dwmmc_rockchip fe2d0000.mmc: Busy; trying anyway
[    7.298349] rk_pcie_establish_link: 232 callbacks suppressed
[    7.298354] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.325017] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.351683] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.378350] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.405017] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.431683] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.458349] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.485016] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.511683] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.538349] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    7.551390] mmc_host mmc2: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
[    7.572283] Run /sbin/init as init process
[    7.605551] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
[    7.719149] EXT4-fs (mmcblk0p7): recovery complete
[    7.719431] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[    7.768424] EXT4-fs (mmcblk0p8): recovery complete
[    7.768735] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
Start mounting all internal partitions in /etc/fstab
Log saved to /var/log/mount-all.log
Note: Will skip fsck, remove /.skip_fsck to enable
[0]: Handling /dev/mmcblk0p6 / ext4 rw,noauto 1
[1]: Handling /dev/mmcblk0p7 /oem ext4 defaults 2
[2]: Handling /dev/mmcblk0p8 /userdata ext4 defaults 2
[2]: Already resized /dev/mmcblk0p8(ext4)
[1]: Already resized /dev/mmcblk0p7(ext4)
[0]: Already resized /dev/mmcblk0p6(ext4)
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
Populating /dev using udev: [    7.901306] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    7.901563] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    7.903154] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    7.903634] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    7.903964] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    7.904259] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[    7.905175] udevd[413]: starting version 3.2.10
[    7.916902] udevd[414]: starting eudev-3.2.10
[    7.933507] dw-dp fde60000.dp: aux failed to read dpcd: -110
[    7.944075] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    7.944301] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    7.944413] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    7.944533] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    7.944655] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.001656] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[    8.001668] rkcif_scale_ch2: update sensor info failed -19
[    8.001958] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[    8.001965] stream_cif_mipi_id2: update sensor info failed -19
[    8.002382] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[    8.002388] rkcif_scale_ch3: update sensor info failed -19
[    8.002974] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[    8.002981] stream_cif_mipi_id3: update sensor info failed -19
[    8.003798] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[    8.003805] stream_cif_mipi_id1: update sensor info failed -19
[    8.004077] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[    8.004083] rkcif_tools_id2: update sensor info failed -19
[    8.006269] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    8.006284] rkcif_tools_id0: update sensor info failed -19
[    8.006363] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[    8.006368] rkcif_tools_id1: update sensor info failed -19
[    8.006901] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    8.006912] rkcif_scale_ch0: update sensor info failed -19
[    8.007708] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[    8.007714] rkcif_scale_ch1: update sensor info failed -19
[    8.013103] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    8.013118] stream_cif_mipi_id0: update sensor info failed -19
done
Starting irqbalance: [    8.044956] dwhdmi-rockchip fdea0000.hdmi: i2c read time out!
[    8.044966] dwhdmi-rockchip fdea0000.hdmi: get hdcp2.x capable failed:-11
[    8.044969] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
OK
[    8.073160] dw-dp fde60000.dp: aux failed to read dpcd: -110
Initializing random number generator: OK
Saving random seed: [    8.084874] dwhdmi-rockchip fde80000.hdmi: i2c read err!
[    8.084900] dwhdmi-rockchip fde80000.hdmi: get hdcp2.x capable failed:-5
[    8.085310] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.085532] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.085754] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.086072] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.086293] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.086521] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.086531] dwhdmi-rockchip fdea0000.hdmi: get hdcp2.x capable failed:-5
[    8.086542] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
OK
Starting system message bus: done
[    8.116265] dw-dp fde60000.dp: aux failed to read dpcd: -110
Starting bluetoothd: OK
[    8.136167] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.136401] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.137235] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.137528] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.137748] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.137964] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
Starting network: [    8.137972] dwhdmi-rockchip fdea0000.hdmi: get hdcp2.x capable failed:-5
[    8.137980] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
Failed to detect Wi-Fi/BT chip!
ln: failed to create symbolic link '': No such file or directory
[    8.165753] dw-dp fde60000.dp: aux failed to read dpcd: -110
[    8.167605] dwhdmi-rockchip fde80000.hdmi: i2c read err!
[    8.167615] dwhdmi-rockchip fde80000.hdmi: get hdcp1.4 capable failed:-5
[    8.167799] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.167916] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.168033] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.168148] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.168264] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.168394] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
OK
Starting dhcpcd...
dhcpcd-9.4.1 starting
DHCPCD_ARGS: interface not found
dhcpcd exited
Starting ntpd: OK
starting weston... done.
Starting dropbear sshd: OK
Starting pulseaudio: OK
[    8.271669] dwhdmi-rockchip fdea0000.hdmi: i2c read time out!
[    8.271704] dwhdmi-rockchip fdea0000.hdmi: get hdcp2.x capable failed:-11
[    8.271718] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
Starting dnsmasq: OK
[    8.300012] dw-dp fde60000.dp: aux failed to read dpcd: -110
Starting input-event-daemon: done
W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified).
W: [pulseaudio] main.c: Compiled with DEPRECATED libsamplerate support!
[    8.309619] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.309973] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.310187] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.310402] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.310770] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.310986] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.310994] dwhdmi-rockchip fdea0000.hdmi: get hdcp2.x capable failed:-5
[    8.311003] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
root@rk3588-buildroot:/# [    8.339300] dw-dp fde60000.dp: aux failed to read dpcd: -110
[    8.343158] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.343795] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.344016] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.344290] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.344564] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.344777] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.344783] dwhdmi-rockchip fdea0000.hdmi: get hdcp2.x capable failed:-5
[    8.344788] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[    8.373161] dw-dp fde60000.dp: aux failed to read dpcd: -110
[    8.375741] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.375976] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.376189] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.376303] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
Date: 1970-01-01 UTC
[00:00:06.722] weston 13.0.0
               https://wayland.freedesktop.org
               Bug reports to: https://gitlab.freedesktop.org/wayland/weston/issues/
               Build: 13.0.0
[00:00:06.723] Command line: /usr/bin/weston
[00:00:06.723] OS: Linux, 5.10.198, #1 SMP Sat Jun 1 15:25:20 CST 2024, aarch64
[00:00:06.723] Flight recorder: enabled
[00:00:06.723] warning: XDG_RUNTIME_DIR "/var/run" is not configured
correctly.  Unix access mode must be 0700 (current mode is 0755),
and must be owned by the user UID 0 (current owner is UID 0).
Refer to your distribution on how to get it, or
http://www.freedesktop.org/wiki/Specifications/basedir-spec
on how to implement it.
/etc/xdg/weston/weston.ini.d/02-desktop.ini: "shell/locking" from "false" to "true"
[00:00:06.724] Using config file '/etc/xdg/weston/weston.ini'
[00:00:06.725] Output repaint window is -1 ms maximum.
[00:00:06.725] Loading module '/usr/lib/libweston-13/drm-backend.so'
[00:00:06.728] initializing drm backend
[00:00:06.728] Entering mirror mode.
[00:00:06.728] Trying direct launcher...
[00:00:06.728] using /dev/dri/card0
[00:00:06.728] DRM: does not support atomic modesetting
[00:00:06.728] DRM: does not support GBM modifiers
[00:00:06.728] DRM: does not support async page flipping
[    8.388130] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_startup: device is no connected or audio is off
[00:00:06.728] DRM: supports picture aspect ratio
[    8.388148] hdmi-audio-codec hdmi-audio-codec.7.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[    8.399722] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_startup: device is no connected or audio is off
[    8.399744] hdmi-audio-codec hdmi-audio-codec.7.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[    8.411559] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_startup: device is no connected or audio is off
[    8.411588] hdmi-audio-codec hdmi-audio-codec.7.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
E: [pulseaudio] module-alsa-card.c: Failed to find a working profile.
E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="platform-hdmiin-sound" card_name="alsa_card.platform-hdmiin-sound" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
E: [pulseaudio] module-rescue-streams.c: module-rescue-stream is obsolete and should no longer be loaded. Please remove it from your configuration.
E: [pulseaudio] module-console-kit.c: GetSessionsForUnixUser() call failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.ConsoleKit was not provided by any .service files
E: [pulseaudio] module.c: Failed to load module "module-console-kit" (argument: ""): initialization failed.
W: [pulseaudio] server-lookup.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead
W: [pulseaudio] main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead
[    8.478358] dwhdmi-rockchip fdea0000.hdmi: i2c read time out!
[    8.478640] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
[    8.490959] file system registered
[    8.506677] dw-dp fde60000.dp: aux failed to read dpcd: -110
[    8.513121] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.513501] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.513736] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.514082] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[    8.514773] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[00:00:06.860] Loading module '/usr/lib/libweston-13/gl-renderer.so'
[    8.515134] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
arm_release_ver: g13p0-01eac0, rk_so_ver: 10
[    8.528907] read descriptors
[    8.528951] read strings
[    8.534209] mali fb000000.gpu: Loading Mali firmware 0x1010000
[    8.536448] mali fb000000.gpu: Mali firmware git_sha: ee476db42870778306fa8d559a605a73f13e455c 
[    8.543862] dw-dp fde60000.dp: aux failed to read dpcd: -110
[00:00:06.895] EGL version: 1.4 Valhall-"g13p0-01eac0"
[00:00:06.895] EGL vendor: ARM
[00:00:06.895] EGL client APIs: OpenGL_ES
[00:00:06.895] EGL features:
               EGL Wayland extension: yes
               context priority: yes
               buffer age: no
               partial update: yes
               swap buffers with damage: no
               configless context: yes
               surfaceless context: yes
               dmabuf support: modifiers
[00:00:06.909] GL version: OpenGL ES 3.2 v1.g13p0-01eac0.11addb9882ee8209dc0912af75110af7
[00:00:06.910] GLSL version: OpenGL ES GLSL ES 3.20
[00:00:06.910] GL vendor: ARM
[00:00:06.910] GL renderer: Mali-G610
[00:00:07.004] GL ES 3.2 - renderer features:
               read-back format: ARGB8888
               glReadPixels supports y-flip: no
               wl_shm 10 bpc formats: yes
               wl_shm 16 bpc formats: no
               wl_shm half-float formats: yes
               internal R and RG formats: yes
               OES_EGL_image_external: yes
               wl_shm sub-image to texture: yes
[00:00:07.004] Using GL renderer
[00:00:07.015] event2  - adc-keys: is tagged by udev as: Keyboard
[00:00:07.015] event2  - adc-keys: device is a keyboard
[00:00:07.017] event0  - rk805 pwrkey: is tagged by udev as: Keyboard
[00:00:07.017] event0  - rk805 pwrkey: device is a keyboard
[00:00:07.018] event3  - rockchip-hdmi0 rockchip-hdmi0: is tagged by udev as: Switch
[00:00:07.018] event3  - not using input device '/dev/input/event3'
[00:00:07.019] event4  - rockchip-hdmi1 rockchip-hdmi1: is tagged by udev as: Switch
[00:00:07.020] event4  - not using input device '/dev/input/event4'
[00:00:07.021] event1  - rockchip,hdmiin rockchip,hdmiin: is tagged by udev as: Switch
[00:00:07.021] event1  - not using input device '/dev/input/event1'
[00:00:07.057] libinput: configuring device "adc-keys".
[00:00:07.057] libinput: configuring device "rk805 pwrkey".
[00:00:07.058] Registered plugin API 'weston_drm_output_api_v1' of size 40
[    8.713704] android_work: did not send uevent (0 0 0000000000000000)
[00:00:07.058] Color manager: no-op
[00:00:07.058] Compositor capabilities:
               arbitrary surface rotation: yes
[    8.715578] dwhdmi-rockchip fde80000.hdmi: i2c read err!
               screen capture uses y-flip: yes
[    8.715595] dwhdmi-rockchip fde80000.hdmi: get hdcp1.4 capable failed:-5
               cursor planes: yes
[    8.716224] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
               arbitrary resolutions: no
[    8.716577] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
               view mask clipping: yes
[    8.716921] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
               explicit sync: yes
[    8.717268] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
               color operations: yes
[    8.717615] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
               presentation clock: CLOCK_MONOTONIC, id 1
[    8.717957] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
               presentation clock resolution: 0.000000001 s
[    8.718413] dwhdmi-rockchip fdea0000.hdmi: i2c read err!
[00:00:07.058] Loading module '/usr/lib/weston/desktop-shell.so'
[    8.718423] dwhdmi-rockchip fdea0000.hdmi: get hdcp2.x capable failed:-5
[00:00:07.061] DRM: head 'HDMI-A-1' found, connector 208 is connected, EDID make 'GSM', model '27MP35', serial ''
[    8.718433] dwhdmi-rockchip fdea0000.hdmi: failed to get edid
               Supported EOTF modes: SDR
[00:00:07.063] DRM: head 'HDMI-A-2' found, connector 224 is connected, EDID make 'unknown', model 'unknown', serial ''
               Supported EOTF modes: SDR
[00:00:07.063] DRM: head 'DSI-1' found, connector 238 is connected, EDID make 'unknown', model 'unknown', serial ''
               Supported EOTF modes: SDR
[00:00:07.064] DRM: head 'DP-1' found, connector 240 is disconnected.
[    8.750075] dw-dp fde60000.dp: aux failed to read dpcd: -110
[00:00:07.095] DRM: head 'DP-2' found, connector 248 is disconnected.
[00:00:07.095] launching '/usr/libexec/weston-keyboard'
[00:00:07.097] launching '/usr/libexec/weston-desktop-shell'
[00:00:07.098] HDMI-A-1 using at least 2 buffers
[00:00:07.098] Output 'HDMI-A-1' attempts EOTF mode: SDR
[00:00:07.098] Output 'HDMI-A-1' using color profile: stock sRGB color profile
[00:00:07.099] Chosen EGL config details: id:   9 rgba: 8 8 8 0 buf: 24 dep:  0 stcl: 0 int: 0-1 type: win|pbf|swap_preserved vis_id: XRGB8888 (0x34325258)
[00:00:07.099] Output HDMI-A-1 (crtc 71) video modes:
               1920x1080@60.0, preferred, current, 148.5 MHz
               1920x1080@60.0 16:9, 148.5 MHz
               1920x1080i@60.0, 74.2 MHz
               1920x1080i@60.0 16:9, 74.2 MHz
               1920x1080@50.0 16:9, 148.5 MHz
               1920x1080i@50.0 16:9, 74.2 MHz
               1600x900@60.0, 108.0 MHz
               1280x1024@60.0, 108.0 MHz
               1152x864@75.0, 108.0 MHz
               1280x720@60.0, 74.2 MHz
               1280x720@60.0 16:9, 74.2 MHz
               1280x720@50.0 16:9, 74.2 MHz
               800x600@75.0, 49.5 MHz
               720x576@50.0 16:9, 27.0 MHz
               720x480@59.9, 27.0 MHz
               720x480@59.9 16:9, 27.0 MHz
               1920x1080@60.0, 148.5 MHz
[00:00:07.099] associating input device event2 with output HDMI-A-1 (none by udev)
[00:00:07.099] associating input device event0 with output HDMI-A-1 (none by udev)
[00:00:07.099] Output HDMI-A-1 changed to mirror output
[00:00:07.099] Output 'HDMI-A-1' enabled with head(s) HDMI-A-1
[00:00:07.099] HDMI-A-2 using at least 2 buffers
[00:00:07.100] Output 'HDMI-A-2' attempts EOTF mode: SDR
[00:00:07.100] Output 'HDMI-A-2' using color profile: stock sRGB color profile
[00:00:07.100] Chosen EGL config details: id:   9 rgba: 8 8 8 0 buf: 24 dep:  0 stcl: 0 int: 0-1 type: win|pbf|swap_preserved vis_id: XRGB8888 (0x34325258)
[00:00:07.100] Output HDMI-A-2 (crtc 93) video modes:
               1920x1080@60.0 16:9, preferred, current, 148.5 MHz
               1920x1080@50.0 16:9, 148.5 MHz
               1280x720@60.0 16:9, 74.2 MHz
               1280x720@50.0 16:9, 74.2 MHz
               1920x1080@60.0, preferred, 148.5 MHz
[00:00:07.100] associating input device event2 with output HDMI-A-2 (none by udev)
[00:00:07.100] associating input device event0 with output HDMI-A-2 (none by udev)
[00:00:07.100] Output HDMI-A-2 changed to mirror output
[00:00:07.100] Output 'HDMI-A-2' enabled with head(s) HDMI-A-2
[00:00:07.100] DSI-1 using at least 2 buffers
[00:00:07.100] Output 'DSI-1' attempts EOTF mode: SDR
[00:00:07.100] Output 'DSI-1' using color profile: stock sRGB color profile
[00:00:07.101] Chosen EGL config details: id:   9 rgba: 8 8 8 0 buf: 24 dep:  0 stcl: 0 int: 0-1 type: win|pbf|swap_preserved vis_id: XRGB8888 (0x34325258)
[    8.774406] dwhdmi-rockchip fdea0000.hdmi: use tmds mode
[00:00:07.101] Output DSI-1 (crtc 137) video modes:
               1080x1920@59.9, preferred, current, 132.0 MHz
[00:00:07.101] associating input device event2 with output DSI-1 (none by udev)
[00:00:07.101] associating input device event0 with output DSI-1 (none by udev)
[00:00:07.101] Output 'DSI-1' enabled with head(s) DSI-1
[    8.824801] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_disable] Crtc atomic disable vp1
[    8.849343] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11(if:1000, flag:0x0) for vp1 dclk: 148500000
[    8.849397] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out1 div: 0 dclk_core1 div: 2
[    8.849411] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop1 to 148500000, get 148500000
[    8.849462] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
[    8.849739] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy pll locked!
[    8.849745] dwhdmi-rockchip fdea0000.hdmi: final tmdsclk = 148500000
[    8.849772] dwhdmi-rockchip fdea0000.hdmi: don't use dsc mode
[    8.849777] dwhdmi-rockchip fdea0000.hdmi: dw hdmi qp use tmds mode
[    8.849784] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: bus_width:0x16a8c8,bit_rate:1485000
[    8.849980] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy lane locked!
[    8.851707] rk-pcie fe170000.pcie: PCIe Link Fail, LTSSM is 0x3, hw_retries=1
[    8.882856] dwhdmi-rockchip fdea0000.hdmi: use tmds mode
[    8.919048] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    8.949073] dwhdmi-rockchip fde80000.hdmi: use tmds mode
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "en_US.UTF-8" (mapped to "en_US.UTF-8")
could not create XKB compose table for locale 'en_US.UTF-8'.  Disabiling compose
xkbcommon: ERROR: couldn't find a Compose file for locale "en_US.UTF-8" (mapped to "en_US.UTF-8")
could not create XKB compose table for locale 'en_US.UTF-8'.  Disabiling compose
[    9.865077] rk-pcie fe170000.pcie: failed to initialize host
[    9.998423] Freeing drm_logo memory: 736K

root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# v4l2-ctl --list-devices
[   42.930727] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   42.930765] stream_cif_mipi_id0: update sensor info failed -19
[   42.930796] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[   42.930804] stream_cif_mipi_id1: update sensor info failed -19
[   42.930829] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[   42.930836] stream_cif_mipi_id2: update sensor info failed -19
[   42.930859] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[   42.930866] stream_cif_mipi_id3: update sensor info failed -19
[   42.930890] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
rk_hdmirx (fdee0000.hdmirx-controller):
[   42.930897] rkcif_scale_ch0: update sensor info failed -19
    /dev/video20
[   42.930919] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[   42.930926] rkcif_scale_ch1: update sensor info failed -19
rkisp-statistics (platform: rkisp):
[   42.930949] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
    /dev/video18
[   42.930956] rkcif_scale_ch2: update sensor info failed -19
    /dev/video19
[   42.930978] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!

[   42.930985] rkcif_scale_ch3: update sensor info failed -19
rkcif-mipi-lvds2 (platform:rkcif):
[   42.931009] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
    /dev/media0
[   42.931015] rkcif_tools_id0: update sensor info failed -19

[   42.931038] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
rkisp_mainpath (platform:rkisp0-vir0):
[   42.931044] rkcif_tools_id1: update sensor info failed -19
    /dev/video11
[   42.931067] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
    /dev/video12
[   42.931074] rkcif_tools_id2: update sensor info failed -19
    /dev/video13
[   42.936230] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
    /dev/video14
[   42.936241] stream_cif_mipi_id0: update sensor info failed -19
    /dev/video15
    /dev/video16
    /dev/video17
    /dev/media1

Failed to open /dev/video0: No such device
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# [   61.121774] usb 1-1: new high-speed USB device number 2 using ehci-platform

root@rk3588-buildroot:/# [   61.270374] usb 1-1: New USB device found, idVendor=1d6c, idProduct=0103, bcdDevice= 0.10
[   61.270417] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   61.270428] usb 1-1: Product: HD WEBCAM
[   61.270437] usb 1-1: Manufacturer: HD WEBCAM
[   61.270445] usb 1-1: SerialNumber: V20210320JH2093
[   61.271698] uvcvideo: Found UVC 1.00 device HD WEBCAM (1d6c:0103)

root@rk3588-buildroot:/# 
root@rk3588-buildroot:/# v4l2-ctl --list-devices
[   64.019961] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   64.019988] stream_cif_mipi_id0: update sensor info failed -19
[   64.020010] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[   64.020015] stream_cif_mipi_id1: update sensor info failed -19
[   64.020032] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[   64.020037] stream_cif_mipi_id2: update sensor info failed -19
[   64.020053] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[   64.020058] stream_cif_mipi_id3: update sensor info failed -19
[   64.020075] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   64.020079] rkcif_scale_ch0: update sensor info failed -19
[   64.020095] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
rk_hdmirx (fdee0000.hdmirx-controller):
[   64.020100] rkcif_scale_ch1: update sensor info failed -19
    /dev/video20
[   64.020116] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[   64.020120] rkcif_scale_ch2: update sensor info failed -19
rkisp-statistics (platform: rkisp):
[   64.020137] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
    /dev/video18
[   64.020141] rkcif_scale_ch3: update sensor info failed -19
    /dev/video19
[   64.020157] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[   64.020161] rkcif_tools_id0: update sensor info failed -19
rkcif-mipi-lvds2 (platform:rkcif):
[   64.020177] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
    /dev/media0
[   64.020181] rkcif_tools_id1: update sensor info failed -19

[   64.020197] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
rkisp_mainpath (platform:rkisp0-vir0):
[   64.020202] rkcif_tools_id2: update sensor info failed -19
    /dev/video11
[   64.026929] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
    /dev/video12
[   64.026937] stream_cif_mipi_id0: update sensor info failed -19
    /dev/video13
    /dev/video14
    /dev/video15
    /dev/video16
    /dev/video17
    /dev/media1

HD WEBCAM: HD 2MP WEBCAM (usb-fc800000.usb-1):
    /dev/video21
    /dev/video22
    /dev/media2

Failed to open /dev/video0: No such device
root@rk3588-buildroot:/# v4l2-ctl --list-formats-ext -d /dev/video21
ioctl: VIDIOC_ENUM_FMT
    Type: Video Capture    [0]: 'MJPG' (Motion-JPEG, compressed)
        Size: Discrete 1920x1080
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
        Size: Discrete 1280x720
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
        Size: Discrete 640x360
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
        Size: Discrete 1920x1080
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
    [1]: 'H264' (H.264, compressed)
        Size: Discrete 1920x1080
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
        Size: Discrete 1280x720
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
        Size: Discrete 640x360
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
        Size: Discrete 1920x1080
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
    [2]: 'YUYV' (YUYV 4:2:2)
        Size: Discrete 1920x1080
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
        Size: Discrete 1280x720
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
        Size: Discrete 640x360
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
        Size: Discrete 1920x1080
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
            Interval: Discrete 0.033s (30.000 fps)
            Interval: Discrete 0.040s (25.000 fps)
 

[END] 2024/6/15 20:53:35