linux sd制作升级卡,linux环境下，手动制作嵌入式设备sd启动卡

一、卸载sdb卡

bhj@ubuntu:~$ sudo umount /dev/sdb1

bhj@ubuntu:~$ sudo umount /dev/sdb2

bhj@ubuntu:~$

二、分区

bhj@ubuntu:~$ sudo fdisk /dev/sdb

Welcome to fdisk (util-linux 2.27.1).

Changes will remain in memory only, until you decide to write them.

Be careful before using the write command.

命令(输入 m 获取帮助)： p

Disk /dev/sdb: 3.7 GiB, 3965190144 bytes, 7744512 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disklabel type: dos

Disk identifier: 0x4843c375

设备       启动   Start  末尾  扇区  Size Id 类型

/dev/sdb1          2048 1026048 1024001  500M  c W95 FAT32 (LBA)

/dev/sdb2       1028096 7744511 6716416  3.2G 83 Linux

命令(输入 m 获取帮助)： d

分区号 (1,2, default 2): 1

Partition 1 has been deleted.

命令(输入 m 获取帮助)： d

Selected partition 2

Partition 2 has been deleted.

命令(输入 m 获取帮助)： 2

2: unknown command

命令(输入 m 获取帮助)： m

Help:

DOS (MBR)

a   toggle a bootable flag

b   edit nested BSD disklabel

c   toggle the dos compatibility flag

Generic

d   delete a partition

F   list free unpartitioned space

l   list known partition types

n   add a new partition

p   print the partition table

t   change a partition type

v   verify the partition table

i   print information about a partition

Misc

m   print this menu

u   change display/entry units

x   extra functionality (experts only)

Script

I   load disk layout from sfdisk script file

O   dump disk layout to sfdisk script file

Save & Exit

w   write table to disk and exit

q   quit without saving changes

Create a new label

g   create a new empty GPT partition table

G   create a new empty SGI (IRIX) partition table

o   create a new empty DOS partition table

s   create a new empty Sun partition table

命令(输入 m 获取帮助)： p

Disk /dev/sdb: 3.7 GiB, 3965190144 bytes, 7744512 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disklabel type: dos

Disk identifier: 0x4843c375

命令(输入 m 获取帮助)： x

专家命令(输入 m 显示帮助)： h

磁头数 (1-256, default 122): 255

专家命令(输入 m 显示帮助)： s

扇区数 (1-63, default 62): 63

专家命令(输入 m 显示帮助)： c

柱面数 (1-1048576, default 482): 482

专家命令(输入 m 显示帮助)： r

命令(输入 m 获取帮助)： n

Partition type

p   primary (0 primary, 0 extended, 4 free)

e   extended (container for logical partitions)

Select (default p): p

分区号 (1-4, default 1): 1

First sector (2048-7744511, default 2048): +1024000

Value out of range.

First sector (2048-7744511, default 2048):

Last sector, +sectors or +size{K,M,G,T,P} (2048-7744511, default 7744511): +1024000 //注意！此处有加号

Created a new partition 1 of type 'Linux' and of size 500 MiB.

命令(输入 m 获取帮助)： t

Selected partition 1

Partition type (type L to list all types): c

Changed type of partition 'Linux' to 'W95 FAT32 (LBA)'.

命令(输入 m 获取帮助)： a //切换可引导标志，否则无法引导启动

Selected partition 1

The bootable flag on partition 1 is enabled now.

命令(输入 m 获取帮助)： n

Partition type

p   primary (1 primary, 0 extended, 3 free)

e   extended (container for logical partitions)

Select (default p): p

分区号 (2-4, default 2): 2

First sector (1026049-7744511, default 1028096):

Last sector, +sectors or +size{K,M,G,T,P} (1028096-7744511, default 7744511):

Created a new partition 2 of type 'Linux' and of size 3.2 GiB.

命令(输入 m 获取帮助)： p

Disk /dev/sdb: 3.7 GiB, 3965190144 bytes, 7744512 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disklabel type: dos

Disk identifier: 0x4843c375

设备       启动   Start  末尾  扇区  Size Id 类型

/dev/sdb1  *       2048 1026048 1024001  500M  c W95 FAT32 (LBA)

/dev/sdb2       1028096 7744511 6716416  3.2G 83 Linux

命令(输入 m 获取帮助)： w

The partition table has been altered.

Calling ioctl() to re-read partition table.

Syncing disks.

三、格式化SD卡

bhj@ubuntu:~$ sudo mkfs.msdos -F 32 /dev/sdb

sdb   sdb1  sdb2

bhj@ubuntu:~$ sudo mkfs.msdos -F 32 /dev/sdb

sdb   sdb1  sdb2

bhj@ubuntu:~$ sudo mkfs.msdos -F 32 /dev/sdb1 -n FAT32

mkfs.fat 3.0.28 (2015-05-16)

到此创建Linux的启动SD卡完成，需要注意的一点是，有时需要重新再Windows下再次使用FAT32格式化第一个引导分区FAT32，才能成功引导Linux。(请不要使用快速格式化)