#!/bin/sh# Copyright Abandoned1996 TCX DataKonsult AB & Monty Program KB &Detron HB
# Thisfileis public domain and comes with NO WARRANTY of any kind
# MySQL daemon start/stop script.
# Usually this is putin /etc/init.d (at least on machines SYSV R4 based
# systems) and linked to/etc/rc3.d/S99mysql and /etc/rc0.d/K01mysql.
# When this isdonethe mysql server will be started when the machine is
# started and shut down when the systems goes down.
# Comments to support chkconfig on RedHat Linux
# chkconfig:2345 64 36# description: A very fast and reliable SQL database engine.
# Comments to support LSB init script conventions
### BEGIN INIT INFO
# Provides: mysql
# Required-Start: $local_fs $network $remote_fs
# Should-Start: ypbind nscd ldap ntpd xntpd
# Required-Stop: $local_fs $network $remote_fs
# Default-Start: 2 3 4 5# Default-Stop: 0 1 6# Short-Description: start and stop MySQL
# Description: MySQL is a very fast and reliable SQL database engine.
### END INIT INFO
# If youinstall MySQL on some other places than /usr/local/mysql, thenyou
# have todo one of the following things forthis script to work:
#
#-Run this script from within the MySQL installation directory
#- Create a /etc/my.cnf filewith the following information:
# [mysqld]
# basedir=/usr/local/mysql#- Add the above to any other configuration file (for example ~/.my.ini)
# and copy my_print_defaults to/usr/bin
#- Add the path to the mysql-installation-directory to the basedir variable
# below.
#
# If you want to affect other MySQL variables, you shouldmakeyour changes
#in the /etc/my.cnf, ~/.my.cnf or other MySQL configuration files.
# If you change basedir, you must also change datadir. These may get
# overwritten by settingsinthe MySQL configuration files.
basedir=datadir=# Default value,inseconds, afterwhich the script should timeout waiting
#forserver start.
# Value here is overriden by valueinmy.cnf.
#0 means don't wait at all
# Negative numbers mean to waitindefinitely
service_startup_timeout=900# Lock directoryfor RedHat /SuSE.
lockdir='/var/lock/subsys'lock_file_path="$lockdir/mysql"# The following variables are only setfor letting mysql.server findthings.
# Set some defaults
mysqld_pid_file_path=
if test -z "$basedir"
thenbasedir=/usr/local/mysql
bindir=/usr/local/mysql/binif test -z "$datadir"
thendatadir=/usr/local/mysql/datafisbindir=/usr/local/mysql/bin
libexecdir=/usr/local/mysql/binelsebindir="$basedir/bin"
if test -z "$datadir"
thendatadir="$basedir/data"
fisbindir="$basedir/sbin"libexecdir="$basedir/libexec"
fi# datadir_set is used to determineifdatadir was set (and so should be
#*not* set inside of the --basedir=handler.)
datadir_set=#
# Use LSB init script functionsfor printing messages, ifpossible
#
lsb_functions="/lib/lsb/init-functions"
if test -f $lsb_functions ; then. $lsb_functionselselog_success_msg()
{echo "SUCCESS! $@"}
log_failure_msg()
{echo "ERROR! $@"}fiPATH="/sbin:/usr/sbin:/bin:/usr/bin:$basedir/bin"export PATH
mode=$1# start or stop
[ $#-ge 1 ] && shiftother_args="$*"# uncommon, but needed when called from an RPM upgrade action
# Expected:"--skip-networking --skip-grant-tables"# They are not checked here, intentionally, as it is the resposibility
# of the"spec" fileauthor to give correct arguments only.case `echo "testing\c"`,`echo -n testing` in
*c*,-n*) echo_n= echo_c=;;*c*,*) echo_n=-n echo_c=;;*) echo_n= echo_c='\c';;esacparse_server_arguments() {for arg do
case "$arg" in
--basedir=*) basedir=`echo "$arg" | sed -e 's/^[^=]*=//'`
bindir="$basedir/bin"
if test -z "$datadir_set"; thendatadir="$basedir/data"
fisbindir="$basedir/sbin"libexecdir="$basedir/libexec";;--datadir=*) datadir=`echo "$arg" | sed -e 's/^[^=]*=//'`
datadir_set=1;;--pid-file=*) mysqld_pid_file_path=`echo "$arg" | sed -e 's/^[^=]*=//'` ;;--service-startup-timeout=*) service_startup_timeout=`echo "$arg" | sed -e 's/^[^=]*=//'` ;;esac
done}
wait_for_pid () {
verb="$1" # created |removed
pid="$2" # process ID of the program operating on the pid-filepid_file_path="$3" # path to the PID file.
i=0avoid_race_condition="by checking again"
while test $i -ne $service_startup_timeout ; do
case "$verb" in
'created')
#wait for a PID-fileto pop into existence.
test-s "$pid_file_path" && i='' &&break
;;'removed')
#wait for this PID-fileto disappear
test! -s "$pid_file_path" && i='' &&break
;;*)echo "wait_for_pid () usage: wait_for_pid created|removed pid pid_file_path"exit1;;esac#if server isn't running, then pid-file will never be updated
if test -n "$pid"; then
if kill -0 "$pid" 2>/dev/null; then: # the server still runselse# The server may have exited between thelast pid-filecheck and now.if test -n "$avoid_race_condition"; thenavoid_race_condition=""continue # Check again.fi# there's nothing that will affect the file.
log_failure_msg "The server quit without updating PID file ($pid_file_path)."return1 # not waiting any more.fi
fi
echo $echo_n ".$echo_c"i=`expr $i + 1`sleep 1
done
if test -z "$i" ; thenlog_success_msg
return0
elselog_failure_msg
return1
fi}
# Get arguments from the my.cnffile,
# the only group,whichis read from now on is [mysqld]if test -x "$bindir/my_print_defaults"; thenprint_defaults="$bindir/my_print_defaults"
else# Try tofind basedir in /etc/my.cnf
conf=/etc/my.cnf
print_defaults=
if test -r $confthensubpat='^[^=]*basedir[^=]*=\(.*\)$'dirs=`sed -e "/$subpat/!d" -e 's//\1/'$conf`for d in$dirsdod=`echo $d | sed -e 's/[ ]//g'`if test -x "$d/bin/my_print_defaults"
thenprint_defaults="$d/bin/my_print_defaults"breakfi
done
fi# Hope it's in the PATH ... but I doubt it
test -z "$print_defaults" && print_defaults="my_print_defaults"
fi#
# Read defaultsfile from 'basedir'. If there is no defaults filethere
# checkif it's in the old (depricated) place (datadir) and read it from there
#
extra_args=""
if test -r "$basedir/my.cnf"
thenextra_args="-e $basedir/my.cnf"
fiparse_server_arguments `$print_defaults $extra_args mysqld server mysql_server mysql.server`
#
# Set pidfile ifnot given
#if test -z "$mysqld_pid_file_path"
thenmysqld_pid_file_path=$datadir/`hostname`.pidelse
case "$mysqld_pid_file_path" in
/*) ;;
* ) mysqld_pid_file_path="$datadir/$mysqld_pid_file_path" ;;
esac
fi
case "$mode" in
'start')
# Start daemon
# Safeguard (relative paths, core dumps..)
cd $basedir
echo $echo_n "Starting MySQL"
if test -x $bindir/mysqld_safe
then
# Give extra arguments to mysqld with the my.cnf file. This script
# may be overwritten at next upgrade.
$bindir/mysqld_safe --defaults-file="$datadir/my.cnf" --pid-file="$mysqld_pid_file_path" $other_args >/dev/null &
wait_for_pid created "$!" "$mysqld_pid_file_path"; return_value=$?
# Make lock for RedHat / SuSE
if test -w "$lockdir"
then
touch "$lock_file_path"
fi
exit $return_value
else
log_failure_msg "Couldn't find MySQL server ($bindir/mysqld_safe)"
fi
;;
'stop')
# Stop daemon. We use a signal here to avoid having to know the
# root password.
if test -s "$mysqld_pid_file_path"
then
# signal mysqld_safe that it needs to stop
touch "$mysqld_pid_file_path.shutdown"
mysqld_pid=`cat "$mysqld_pid_file_path"`
if (kill -0 $mysqld_pid 2>/dev/null)
then
echo $echo_n "Shutting down MySQL"
kill $mysqld_pid
# mysqld should remove the pid file when it exits, so wait for it.
wait_for_pid removed "$mysqld_pid" "$mysqld_pid_file_path"; return_value=$?
else
log_failure_msg "MySQL server process #$mysqld_pid is not running!"
rm "$mysqld_pid_file_path"
fi
# Delete lock for RedHat / SuSE
if test -f "$lock_file_path"
then
rm -f "$lock_file_path"
fi
exit $return_value
else
log_failure_msg "MySQL server PID file could not be found!"
fi
;;
'restart')
# Stop the service and regardless of whether it was
# running or not, start it again.
if $0 stop $other_args; then
$0 start $other_args
else
log_failure_msg "Failed to stop running server, so refusing to try to start."
exit 1
fi
;;
'reload'|'force-reload')
if test -s "$mysqld_pid_file_path" ; then
read mysqld_pid < "$mysqld_pid_file_path"
kill -HUP $mysqld_pid && log_success_msg "Reloading service MySQL"
touch "$mysqld_pid_file_path"
else
log_failure_msg "MySQL PID file could not be found!"
exit 1
fi
;;
'status')
# First, check to see if pid file exists
if test -s "$mysqld_pid_file_path" ; then
read mysqld_pid < "$mysqld_pid_file_path"
if kill -0 $mysqld_pid 2>/dev/null ; then
log_success_msg "MySQL running ($mysqld_pid)"
exit 0
else
log_failure_msg "MySQL is not running, but PID file exists"
exit 1
fi
else
# Try to find appropriate mysqld process
mysqld_pid=`pidof $libexecdir/mysqld`
# test if multiple pids exist
pid_count=`echo $mysqld_pid | wc -w`
if test $pid_count -gt 1 ; then
log_failure_msg "Multiple MySQL running but PID file could not be found ($mysqld_pid)"
exit 5
elif test -z $mysqld_pid ; then
if test -f "$lock_file_path" ; then
log_failure_msg "MySQL is not running, but lock file ($lock_file_path) exists"
exit 2
fi
log_failure_msg "MySQL is not running"
exit 3
else
log_failure_msg "MySQL is running but PID file could not be found"
exit 4
fi
fi
;;
*)
# usage
basename=`basename "$0"`
echo "Usage: $basename {start|stop|restart|reload|force-reload|status} [ MySQL server options ]"
exit 1
;;
esac
exit 0