mysql并发压测_MySQL压测--注意事项和FAQ

上次我们讲了TPCC的安装和一些使用方法，今天先不着急真正的做MySQL压力测试，先把我最近做压力测试的遇到的一些问题罗列出来，这样

后面做测试可以事半功倍。

1.注意事项

(1).提前规划好具体要测试什么，即测试目的，比如MySQL5.6与5.7的性能差异；

异步复制和半同步复制的TPS；

设置双1(innodb_flush_log_at_trx_commit=1、sync_binlog=1)性能对数据库性能影响多少；

确认即将上线的新业务对MySQL负载影响多少，是否能承载得住，是否需要对服务器进行扩容或升级配置；

(2).压力测试比较耗时，我们不可能时刻监督每次压测什么时候结束，然后手动的进行下一次测试，所以要写个脚本帮助我们一键测试；

(3).根据测试环境的硬件配置给予机器适当的压力，对于有限的硬件配置，不能无限的增压，这样数据库里全是lock wait timeout等报错，最后会使MySQL Crash的，这个可以参考大师叶老师的博客《MySQL压力测试基准值》

2.FAQ

这一块主要讲测试的时候系统和数据库出现的问题，导致压测无法进行

(1)tpcc数据库在预热rampup时候的报错

sht-sgmhadoopcm-01:mysqladmin:/usr/local/mysql/tpcc-mysql-master/logs:>less tpcc_runlog_parameter_20180620234749_512_THREADS

RAMP-UP TIME.(120 sec.)

1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382)

1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382)

1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382)

1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382)

1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382)

1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382)

1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382)

1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382)

1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382)

1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382)

1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382)

1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382)

解决方法：

错误很明显，参数max_prepared_stmt_count(默认16382)现在的大小已经无法满足负载需求了，这个参数是限制数据库中已经准备的statements数量，即sql数量，我们把它增大十倍。

sht-sgmhadoopdn-02.telenav.cn:mysqladmin:/usr/local/mysql/data:>vim /ect/my.cnf

max_prepared_stmt_count = 163820

然后重启MySQL

mysql> show variables like '%max_prepared_stmt_count%';

+-------------------------+-------+

| Variable_name           | Value |

+-------------------------+-------+

| max_prepared_stmt_count =  | 163820 |

+-------------------------+-------+

参数官方解析：

This variable limits the total number of prepared statements in the server. It can be used in environments where there is the potential for denial-of-service attacks based on running the server out of memory by preparing huge numbers of statements. If the value is set lower than the current number of prepared statements, existing statements are not affected and can be used, but no new statements can be prepared until the current number drops below the limit. The default value is 16,382. The permissible range of values is from 0 to 1 million. Setting the value to 0 disables prepared statements.

(2)MySQL负载过高，导致crash

数据库日志也出现大量的日志信息：

sht-sgmhadoopdn-02.telenav.cn:mysqladmin:/usr/local/mysql/data:>vim sht-sgmhadoopdn-01.err

2018-06-20T17:04:42.935422Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 5690ms. The settings might not be optimal. (flushed=1119 and evicted=0, during the time.)

2018-06-20T17:05:45.061790Z 0 [ERROR] Error in accept: Too many open files

2018-06-20T17:05:47.846070Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 5057ms. The settings might not be optimal. (flushed=912 and evicted=0, during the time.)

2018-06-20T17:06:09.564302Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 4569ms. The settings might not be optimal. (flushed=913 and evicted=0, during the time.)

2018-06-20T17:06:35.456128Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 5822ms. The settings might not be optimal. (flushed=959 and evicted=0, during the time.)

2018-06-20T17:06:47.324711Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 4312ms. The settings might not be optimal. (flushed=673 and evicted=0, during the time.)

2018-06-20T17:06:55.651725Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 5018ms. The settings might not be optimal. (flushed=592 and evicted=0, during the time.)

2018-06-20T17:07:09.104978Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 4983ms. The settings might not be optimal. (flushed=936 and evicted=0, during the time.)

2018-06-20T17:07:21.873005Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 4723ms. The settings might not be optimal. (flushed=677 and evicted=0, during the time.)

2018-06-20T17:07:40.903065Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 4432ms. The settings might not be optimal. (flushed=431 and evicted=0, during the time.)

2018-06-20T17:08:13.283422Z 1085 [ERROR] Can't generate a unique log-filename /usr/local/mysql/arch/mysql-bin.(1-999)

2018-06-20T17:08:13.283501Z 1085 [ERROR] mysqld: Binary logging not possible. Message: Either disk is full or file system is read only while rotating the binlog. Aborting the server.

17:08:13 UTC - mysqld got signal 6 ;

This could be because you hit a bug. It is also possible that this binary

or one of the libraries it was linked against is corrupt, improperly built,

or misconfigured. This error can also be caused by malfunctioning hardware.

Attempting to collect some information that could help diagnose the problem.

As this is a crash and something is definitely wrong, the information

collection process might fail.

key_buffer_size=268435456

read_buffer_size=2097152

max_used_connections=981

max_threads=214

thread_count=981

connection_count=981

It is possible that mysqld could use up to

key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1272281 K  bytes of memory

Hope that's ok; if not, decrease some variables in the equation.

Thread pointer: 0x7f55ddfa9710

Attempting backtrace. You can use the following information to find out

where mysqld died. If you see no messages after this, something went

terribly wrong...

stack_bottom = 7f55bac30ea8 thread_stack 0x40000

mysqld(my_print_stacktrace+0x35)[0xf4a495]

mysqld(handle_fatal_signal+0x4a4)[0x7ce2f4]

/lib64/libpthread.so.0(+0xf5e0)[0x7f5774a0b5e0]

/lib64/libc.so.6(gsignal+0x37)[0x7f57733fd1f7]

/lib64/libc.so.6(abort+0x148)[0x7f57733fe8e8]

mysqld[0xee249a]

mysqld(_ZN13MYSQL_BIN_LOG13new_file_implEbP28Format_description_log_event+0x50c)[0xeeec4c]

mysqld(_ZN13MYSQL_BIN_LOG6rotateEbPb+0x3e)[0xeeed0e]

mysqld(_ZN13MYSQL_BIN_LOG14ordered_commitEP3THDbb+0x497)[0xef1137]

mysqld(_ZN13MYSQL_BIN_LOG6commitEP3THDb+0x585)[0xef1825]

mysqld(_Z15ha_commit_transP3THDbb+0x174)[0x81f594]

mysqld(_Z12trans_commitP3THD+0x49)[0xdd1589]

mysqld(_Z21mysql_execute_commandP3THDb+0x2be0)[0xd186d0]

mysqld(_Z11mysql_parseP3THDP12Parser_state+0x40d)[0xd1af7d]

mysqld(_Z16dispatch_commandP3THDPK8COM_DATA19enum_server_command+0x119a)[0xd1c19a]

mysqld(_Z10do_commandP3THD+0x194)[0xd1d044]

mysqld(handle_connection+0x29c)[0xded7ac]

mysqld(pfs_spawn_thread+0x174)[0xf707b4]

/lib64/libpthread.so.0(+0x7e25)[0x7f5774a03e25]

/lib64/libc.so.6(clone+0x6d)[0x7f57734c034d]

Trying to get some variables.

Some pointers may be invalid and cause the dump to abort.

Query (7f55de4918b0): is an invalid pointer

Connection ID (thread ID): 1085

Status: NOT_KILLED

The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains

information that should help you find out what is causing the crash.

解决方法：

建议：不要给与数据库太大的压力，控制好thread并发数

(3)linux某一用户达到max user processes后，导致暂时无法使用该用户mysqladmin登录和无法使用任何bash命令

-bash-4.2$ sudo su mysqladmin

su: failed to execute /bin/bash: Resource temporarily unavailable

sht-sgmhadoopcm-01:mysqladmin:/usr/local/mysql/tpcc-mysql-master/logs:>ls

bash: fork: retry: No child processes

bash: fork: retry: No child processes

bash: fork: retry: No child processes

bash: fork: retry: No child processes

bash: fork: Resource temporarily unavailable

解决方法：

查看系统的一些限制设置，发现max user processes 只有4096，进程被用完，所以无论写入什么命令，系统都无法及时作出响应

[root@sht-sgmhadoopcm-01 ~]# ulimit -a

core file size          (blocks, -c) 0

data seg size           (kbytes, -d) unlimited

scheduling priority             (-e) 0

file size               (blocks, -f) unlimited

pending signals                 (-i) 31207

max locked memory       (kbytes, -l) 64

max memory size         (kbytes, -m) unlimited

open files                      (-n) 65536

pipe size            (512 bytes, -p) 8

POSIX message queues     (bytes, -q) 819200

real-time priority              (-r) 0

stack size              (kbytes, -s) 8192

cpu time               (seconds, -t) unlimited

max user processes              (-u) 4096

virtual memory          (kbytes, -v) unlimited

file locks                      (-x) unlimited

[root@sht-sgmhadoopcm-01 ~]# vim /etc/security/limits.conf

*               soft    nproc           65536

*               hard    nproc           65536

*               soft    nofile          65536

*               hard    nofile          65536

还需要修改一个默认的配置文件才能真正的生效：

[root@sht-sgmhadoopcm-01 ~]# vim /etc/security/limits.d/20-nproc.conf

# Default limit for number of user's processes to prevent

# accidental fork bombs.

# See rhbz #432903 for reasoning.

*          soft    nproc     65536 #把这里的4096改大为65536或者为unlimited

root       soft    nproc     unlimited

查看已经生效：

sht-sgmhadoopcm-01:mysqladmin:/usr/local/mysql/tpcc-mysql-master/logs:>ulimit -u

65536

(4)并发太大，导致大量的lock

当线程数达到1536及以上的时候，日志中出现大量的lock信息：

$less tpcc_runlog_parameter_20180621170023_1536_THREADS

payment 1466:1

payment 247:1

1205, HY000, Lock wait timeout exceeded; try restarting transaction

1205, HY000, Lock wait timeout exceeded; try restarting transaction

payment 954:1

1205, HY000, Lock wait timeout exceeded; try restarting transaction

payment 485:1

1205, HY000, Lock wait timeout exceeded; try restarting transaction

payment 266:1

1205, HY000, Lock wait timeout exceeded; try restarting transaction

......

.......

2013, HY000, Lost connection to MySQL server at 'reading initial communication packet', system error: 104

2013, HY000, Lost connection to MySQL server at 'reading initial communication packet', system error: 104

2013, HY000, Lost connection to MySQL server at 'reading initial communication packet', system error: 104

2013, HY000, Lost connection to MySQL server at 'reading initial communication packet', system error: 104

2013, HY000, Lost connection to MySQL server at 'reading initial communication packet', system error: 104

解决方法：

此时查看MySQL中的一些Lock状态信息,可以看出来全部都是一些x锁，说明现在并发过大，导致数据库处理不过来，产生大量排它锁。

mysql> select * from INFORMATION_SCHEMA.INNODB_LOCKS;

+------------------+-------------+-----------+-----------+----------------------+------------+------------+-----------+----------+-----------+

| lock_id          | lock_trx_id | lock_mode | lock_type | lock_table           | lock_index | lock_space | lock_page | lock_rec | lock_data |

+------------------+-------------+-----------+-----------+----------------------+------------+------------+-----------+----------+-----------+

| 15043927:63:3:8  | 15043927    | X         | RECORD    | `tpccdb`.`warehouse` | PRIMARY    |         63 |         3 |        8 | 7         |

| 15043750:63:3:8  | 15043750    | X         | RECORD    | `tpccdb`.`warehouse` | PRIMARY    |         63 |         3 |        8 | 7         |

| 15043742:63:3:8  | 15043742    | X         | RECORD    | `tpccdb`.`warehouse` | PRIMARY    |         63 |         3 |        8 | 7         |

| 15043700:63:3:8  | 15043700    | X         | RECORD    | `tpccdb`.`warehouse` | PRIMARY    |         63 |         3 |        8 | 7         |

| 15043656:63:3:8  | 15043656    | X         | RECORD    | `tpccdb`.`warehouse` | PRIMARY    |         63 |         3 |        8 | 7         |

| 15043646:63:3:8  | 15043646    | X         | RECORD    | `tpccdb`.`warehouse` | PRIMARY    |         63 |         3 |        8 | 7         |

| 15043607:63:3:8  | 15043607    | X         | RECORD    | `tpccdb`.`warehouse` | PRIMARY    |         63 |         3 |        8 | 7         |

| 15043399:63:3:8  | 15043399    | X         | RECORD    | `tpccdb`.`warehouse` | PRIMARY    |         63 |         3 |        8 | 7         |

| 15043388:63:3:8  | 15043388    | X         | RECORD    | `tpccdb`.`warehouse` | PRIMARY    |         63 |         3 |        8 | 7         |

......

| 15043727:64:3:56 | 15043727    | X         | RECORD    | `tpccdb`.`district`  | PRIMARY    |         64 |         3 |       56 | 6, 5      |

| 15035687:64:3:62 | 15035687    | X         | RECORD    | `tpccdb`.`district`  | PRIMARY    |         64 |         3 |       62 | 7, 1      |

| 15043855:64:3:62 | 15043855    | X         | RECORD    | `tpccdb`.`district`  | PRIMARY    |         64 |         3 |       62 | 7, 1      |

| 15032784:64:3:56 | 15032784    | X         | RECORD    | `tpccdb`.`district`  | PRIMARY    |         64 |         3 |       56 | 6, 5      |

+------------------+-------------+-----------+-----------+----------------------+------------+------------+-----------+----------+-----------+

1756 rows in set, 1 warning (3.87 sec)

建议：不要给与数据库太大的压力，控制好thread并发数

(5)由于磁盘空间不足，导致OS和MySQL相关报错在启动MySQL的时候err日志报的错误：

sht-sgmhadoopdn-01.telenav.cn:mysqladmin:/usr/local/mysql/data:>tail -f hostname.err

2018-06-23T08:21:35.417981Z 0 [Note] --secure-file-priv is set to NULL. Operations related to importing and exporting data are disabled

2018-06-23T08:21:35.418138Z 0 [Note] mysqld (mysqld 5.7.21-log) starting as process 16512 ...

2018-06-23T08:21:35.438102Z 0 [Note] InnoDB: PUNCH HOLE support available

2018-06-23T08:21:35.438190Z 0 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins

2018-06-23T08:21:35.438202Z 0 [Note] InnoDB: Uses event mutexes

2018-06-23T08:21:35.438242Z 0 [Note] InnoDB: GCC builtin __sync_synchronize() is used for memory barrier

2018-06-23T08:21:35.438340Z 0 [Note] InnoDB: Compressed tables use zlib 1.2.3

2018-06-23T08:21:35.438390Z 0 [Note] InnoDB: Using Linux native AIO

2018-06-23T08:21:35.449551Z 0 [Note] InnoDB: Number of pools: 1

2018-06-23T08:21:35.449862Z 0 [Note] InnoDB: Using CPU crc32 instructions

2018-06-23T08:21:35.456460Z 0 [Note] InnoDB: Initializing buffer pool, total size = 5G, instances = 8, chunk size = 128M

2018-06-23T08:21:36.274392Z 0 [Note] InnoDB: Completed initialization of buffer pool

2018-06-23T08:21:36.426894Z 0 [Note] InnoDB: If the mysqld execution user is authorized, page cleaner thread priority can be changed. See the man page of setpriority().

2018-06-23T08:21:36.441471Z 0 [Note] InnoDB: Opened 3 undo tablespaces

2018-06-23T08:21:36.441504Z 0 [Note] InnoDB: 3 undo tablespaces made active

2018-06-23T08:21:36.441913Z 0 [Note] InnoDB: Highest supported file format is Barracuda.

2018-06-23T08:21:36.629202Z 0 [Note] InnoDB: Creating shared tablespace for temporary tables

2018-06-23T08:21:36.629339Z 0 [Note] InnoDB: Setting file '/usr/local/mysql/data/ibtmp1' size to 12 MB. Physically writing the file full; Please wait ...

2018-06-23T08:21:36.646819Z 0 [Warning] InnoDB: 1048576 bytes should have been written. Only 794624 bytes written. Retrying for the remaining bytes.

2018-06-23T08:21:36.790869Z 0 [Warning] InnoDB: 1048576 bytes should have been written. Only 921600 bytes written. Retrying for the remaining bytes.

2018-06-23T08:21:38.380026Z 0 [Warning] InnoDB: 1048576 bytes should have been written. Only 925696 bytes written. Retrying for the remaining bytes.

2018-06-23T08:21:38.390611Z 0 [Warning] InnoDB: 1048576 bytes should have been written. Only 929792 bytes written. Retrying for the remaining bytes.

2018-06-23T08:21:38.399767Z 0 [Warning] InnoDB: 1048576 bytes should have been written. Only 933888 bytes written. Retrying for the remaining bytes.

2018-06-23T08:21:38.412285Z 0 [Warning] InnoDB: 1048576 bytes should have been written. Only 937984 bytes written. Retrying for the remaining bytes.

2018-06-23T08:21:38.419670Z 0 [Warning] InnoDB: 1048576 bytes should have been written. Only 942080 bytes written. Retrying for the remaining bytes.

2018-06-23T08:21:38.436278Z 0 [Warning] InnoDB: Retry attempts for writing partial data failed.

2018-06-23T08:21:38.436345Z 0 [ERROR] InnoDB: Write to file /usr/local/mysql/data/ibtmp1failed at offset 11534336, 1048576 bytes should have been written, only 942080 were written. Operating system error number 28. Check that your OS and file system support files of this size. Check also that the disk is not full or a disk quota exceeded.

2018-06-23T08:21:38.436408Z 0 [ERROR] InnoDB: Error number 28 means 'No space left on device'

2018-06-23T08:21:38.436426Z 0 [Note] InnoDB: Some operating system error numbers are described at http://dev.mysql.com/doc/refman/5.7/en/operating-system-error-codes.html

2018-06-23T08:21:38.436442Z 0 [ERROR] InnoDB: Could not set the file size of '/usr/local/mysql/data/ibtmp1'. Probably out of disk space

2018-06-23T08:21:38.436457Z 0 [ERROR] InnoDB: Unable to create the shared innodb_temporary

2018-06-23T08:21:38.436467Z 0 [ERROR] InnoDB: Plugin initialization aborted with error Generic error

2018-06-23T08:21:39.040518Z 0 [Note] InnoDB: Removed temporary tablespace data file: "ibtmp1"

2018-06-23T08:21:39.040570Z 0 [ERROR] Plugin 'InnoDB' init function returned error.

2018-06-23T08:21:39.040581Z 0 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed.

2018-06-23T08:21:39.040597Z 0 [ERROR] Failed to initialize builtin plugins.

2018-06-23T08:21:39.040673Z 0 [ERROR] Aborting

2018-06-23T08:21:39.040699Z 0 [Note] Binlog end

2018-06-23T08:21:39.041472Z 0 [Note] mysqld: Shutdown complete从库同步也会遇到错误:

root@localhost [(none)]>show slave status\G

*************************** 1. row ***************************

Slave_IO_State: Reconnecting after a failed master event read

Master_Host: 172.16.101.58

Master_User: repl

Master_Port: 3306

Connect_Retry: 60

Master_Log_File: mysql-bin.000041

Read_Master_Log_Pos: 245615

Relay_Log_File: relay-bin.000025

Relay_Log_Pos: 925225142

Relay_Master_Log_File: mysql-bin.000014

Slave_IO_Running: Connecting

Slave_SQL_Running: Yes

Replicate_Do_DB:

Replicate_Ignore_DB:

Replicate_Do_Table:

Replicate_Ignore_Table:

Replicate_Wild_Do_Table:

Replicate_Wild_Ignore_Table:

Last_Errno: 0

Last_Error:

Skip_Counter: 0

Exec_Master_Log_Pos: 925224929

Relay_Log_Space: 21652623260

Until_Condition: None

Until_Log_File:

Until_Log_Pos: 0

Master_SSL_Allowed: No

Master_SSL_CA_File:

Master_SSL_CA_Path:

Master_SSL_Cert:

Master_SSL_Cipher:

Master_SSL_Key:

Seconds_Behind_Master: 123889

Master_SSL_Verify_Server_Cert: No

Last_IO_Errno: 2003

Last_IO_Error: error reconnecting to master 'repl@172.16.101.58:3306' - retry-time: 60  retries: 119

Last_SQL_Errno: 0

Last_SQL_Error:

Replicate_Ignore_Server_Ids:

Master_Server_Id: 583306

Master_UUID: 7dac3e2a-7789-11e8-ae76-0050568211bd

Master_Info_File: mysql.slave_master_info

SQL_Delay: 0

SQL_Remaining_Delay: NULL

Slave_SQL_Running_State: System lock

Master_Retry_Count: 86400

Master_Bind:

Last_IO_Error_Timestamp: 180626 11:26:30

Last_SQL_Error_Timestamp:

Master_SSL_Crl:

Master_SSL_Crlpath:

Retrieved_Gtid_Set: 7dac3e2a-7789-11e8-ae76-0050568211bd:9-6216578

Executed_Gtid_Set: 7dac3e2a-7789-11e8-ae76-0050568211bd:1-1912222

Auto_Position: 1

Replicate_Rewrite_DB:

Channel_Name:

Master_TLS_Version:

1 row in set (0.00 sec)

TPCC压测时候的日志报错

sht-sgmhadoopcm-01:mysqladmin:/usr/local/mysql/tpcc-mysql-master/logs:>less tpcc_runlog_parameter_20180625075957_1024_THREADS

delivery 241:5

1114, HY000, The table 'order_line' is full

delivery 823:5

1114, HY000, The table 'order_line' is full

delivery 618:5

......

......

使用vim打开一个文件的时候报错

E297: Write error in swap file

"hostname.err" [noeol] 3437L, 417792C

Press ENTER or type command to continue

解决方法：

sht-sgmhadoopdn-01.telenav.cn:mysqladmin:/usr/local/mysql/data:>df -Th

Filesystem              Type      Size  Used Avail Use% Mounted on

/dev/mapper/centos-root xfs        77G   77G   12M 100% /

devtmpfs                devtmpfs  2.9G     0  2.9G   0% /dev

tmpfs                   tmpfs     2.9G     0  2.9G   0% /dev/shm

tmpfs                   tmpfs     2.9G   65M  2.8G   3% /run

tmpfs                   tmpfs     2.9G     0  2.9G   0% /sys/fs/cgroup

/dev/sda1               xfs       497M  132M  366M  27% /boot

建议：删除无用的文件释放disk space,或者mount一个更大的磁盘

参考链接：