c语言单片机4*4键盘程序,求51单片机矩阵4*4键盘程序,P0口接一个数码管,P3口接矩阵键盘,C语言的...

#include

unsigned char keyval,keynum=0;

unsigned char distab[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0x88,0x83,0xc6,0xa1,0x86,0x8e,0xff};

void t1isr() interrupt 3

{

unsigned char sccode,recode;

TH0=(65536-10000)/256;

TL0=(65536-10000)%256;

P3=0x0f; //发0扫描,列线输入

if ((P3 & 0x0f) != 0x0f)keynum++; //有键按下

else keynum=0;

if(keynum>5) //按键保持在5次中断以上

{

keynum=0;

sccode = 0xef; //逐行扫描初值

while((sccode&0x01)!=0)

{

P3=sccode;

if((P3&0x0f)!=0x0f)

{

recode=(P3&0x0f)|0xf0;

getkey((~sccode)+(~recode));

}

else

sccode=(sccode<<1)|0x01;

}

}

getkey(0);

}

void getkey(unsigned char key)

{

if(key==0){keyval=0xff;return;}

switch(key)

{

case 0x11:keyval=7;break;

case 0x12:keyval=4;break;

case 0x14:keyval=1;break;

case 0x18:keyval=10;break;

case 0x21:keyval=8;break;

case 0x22:keyval=5;break;

case 0x24:keyval=2;break;

case 0x28:keyval=0;break;

case 0x41:keyval=9;break;

case 0x42:keyval=6;break;

case 0x44:keyval=3;break;

case 0x48:keyval=11;break;

case 0x81:keyval=12;break;

case 0x82:keyval=13;break;

case 0x84:keyval=14;break;

case 0x88:keyval=15;break;

default:keyval=0xff;break;

}

}

main()

{

TMOD=0x01;

TH0=(65536-10000)/256;

TL0=(65536-10000)%256;

TR0=1;

ET0=1;

EA=1;

while(1)

{

if(keyval!=0xff)P0=distab[keyval];

}

}

取消

评论