在linux下我们可以通过
int pthread_create(pthread_t *thread, const
pthread_attr_t *attr, void
*(*start_routine)(void*), void *arg);
来创建线程,但是如何设置线程的优先级呢?在讨论这个问题的时候,
我们先要确定当前线程使用的调度策略,
posix提供了
int pthread_attr_getschedpolicy(const pthread_attr_t *attr, int
*policy);函数
来获取所使用的调度策略,它们是:SCHED_FIFO, SCHED_RR 和 SCHED_OTHER。
我们可以使用
int sched_get_priority_max(int policy);
int sched_get_priority_min(int policy);
来获取线程线程可是设置的最大和最小的优先级值,
如果调用成功就返回最大和最小的优先级值,否则返回-1。
从我现在运行的linux系统中,
我使用下列程序获取了对应三种调度策略中的最大和最小优先级:
policy = SCHED_OTHER
Show current configuration of priority
max_priority = 0
min_priority = 0
Show SCHED_FIFO of priority
max_priority = 99
min_priority = 1
Show SCHED_RR of priority
max_priority = 99
min_priority = 1
Show priority of current thread
priority = 0
Set thread policy
Set SCHED_FIFO policy
policy = SCHED_FIFO
Set SCHED_RR policy
policy = SCHED_RR
Restore current policy
policy = SCHED_OTHER
我们可以看到SCHED_OTHER是不支持优先级使用的,
而SCHED_FIFO和SCHED_RR支持优先级的使用,
他们分别为1和99,数值越大优先级越高。
从上面的结果我们可以看出,如果程序控制线程的优先级,
一般是用pthread_attr_getschedpolicy来获取系统使用的调度策略,
如果是SCHED_OTHER的话,表明当前策略不支持线程优先级的使用,
否则可以。当然所设定的优先级范围必须在最大和最小值之间。
我们可以通过sched_get_priority_max和
sched_get_priority_min来获取。可能网友会问,
是否我们可以通过
int pthread_attr_setschedpolicy(pthread_attr_t *attr, int
policy);
来设定自己所需的调度策略呢?
我觉得是完全可以的(有些系统需要定义_POSIX_THREAD_PRIORITY_SCHEDULING),
只要系统实现了对应的调用策略。说了半天,我们还没有说,
在系统允许使用线程优先级别的时候,如何设置优先级别呢?
int pthread_attr_setschedparam(pthread_attr_t
*attr, const struct sched_param *param);
int pthread_attr_getschedparam(const pthread_attr_t
*attr, struct sched_param *param);
上面两个函数分别用于设置线程的优先级,
struct sched_param的定义如下
struct sched_param{ int __sched_priority; //所要设定的线程优先级
};
使用的测试程序:
#include
#include
#include
#include
using namespace std;
static int get_thread_policy( pthread_attr_t
&attr )
{
int policy;
int rs =
pthread_attr_getschedpolicy( &attr,
&policy );
assert( rs == 0 );
switch ( policy )
{
case
SCHED_FIFO:
cout << "policy = SCHED_FIFO"
<< endl;
break;
case
SCHED_RR:
cout << "policy = SCHED_RR"
<< endl;
break;
case
SCHED_OTHER:
cout << "policy = SCHED_OTHER"
<< endl;
break;
default:
cout << "policy = UNKNOWN"
<< endl;
break;
}
return
policy;
}
static void show_thread_priority( pthread_attr_t
&attr, int policy )
{
int priority =
sched_get_priority_max( policy );
assert( priority != -1
);
cout
<< "max_priority = "
<< priority
<< endl;
priority = sched_get_priority_min( policy );
assert( priority != -1
);
cout
<< "min_priority = "
<< priority
<< endl;
}
static int get_thread_priority( pthread_attr_t
&attr )
{
struct sched_param
param;
int rs
= pthread_attr_getschedparam( &attr,
¶m );
assert( rs == 0 );
cout
<< "priority = "
<< param.__sched_priority
<< endl;
return
param.__sched_priority;
}
static void set_thread_policy( pthread_attr_t
&attr, int policy )
{
int rs =
pthread_attr_setschedpolicy( &attr, policy );
assert( rs == 0 );
get_thread_policy( attr
);
}
int main( void )
{
pthread_attr_t
attr;
struct sched_param
sched;
int rs;
rs =
pthread_attr_init( &attr );
assert( rs == 0
);
int
policy = get_thread_policy( attr );
cout
<< "Show current configuration of
priority" << endl;
show_thread_priority(
attr, policy );
cout
<< "Show SCHED_FIFO of priority"
<< endl;
show_thread_priority(
attr, SCHED_FIFO );
cout
<< "Show SCHED_RR of priority"
<< endl;
show_thread_priority(
attr, SCHED_RR );
cout
<< "Show priority of current thread"
<< endl;
int priority =
get_thread_priority( attr );
cout
<< "Set thread policy"
<< endl;
cout
<< "Set SCHED_FIFO policy"
<< endl;
set_thread_policy( attr,
SCHED_FIFO );
cout
<< "Set SCHED_RR policy"
<< endl;
set_thread_policy( attr,
SCHED_RR );
cout
<< "Restore current policy"
<< endl;
set_thread_policy( attr,
policy );
rs =
pthread_attr_destroy( &attr );
assert( rs == 0
);
return
0;
}
2.6 Linux有3个scheduling policy
#define SCHED_OTHER 0
#define SCHED_FIFO 1
#define SCHED_RR 2
第一个是普通进程的,后两个是实时进程的
一般的进程都是普通进程,系统中出现实时进程的机会很少
2.6 Linux有140个优先级
后40个和nice value一一对应,属于SCHED_OTHER
前100个属于SCHED_FIFO, SCHED_RR
FIFO,RR这两个的区别学过OS应该都知道吧
一个是先进先出,一个是round robin
因为SCHED_FIFO, SCHED_RR优先级高于所有SCHED_OTHER的进程
所以只要他们能够运行,在他们运行完之前,所有SCHED_OTHER的进程的都没有得到执行的机会
可以以root身份试一下这个小程序,普通用户无法调用sched_setscheduler系统调用
不过做好准备,一但运行起来之后,要结束就只有按机箱上的reset
#include
int main(){
struct sched_param
sp;
sp.sched_priority =
99;
sched_setscheduler(0,
SCHED_RR, &sp);
printf("%d\n",
sched_getscheduler(0));
for(;;);
return 0;
}