linux 分区个数限制,逻辑分区个数限制是多少？

rhel5，怎么划了几个逻辑分区就不能再分了？

有2.2个G的空白空间，但只分了一个多G就不能再分了。

[root@localhost ~]# fdisk -l

Disk /dev/sda: 120.0 GB, 120034123776 bytes

255 heads, 63 sectors/track, 14593 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot      Start         End      Blocks   Id  System

/dev/sda1   *           1        1216     9767488+   7  HPFS/NTFS

/dev/sda2            1217       14593   107450752+   f  W95 Ext'd (LBA)

/dev/sda5            1217        3827    20972826    7  HPFS/NTFS

/dev/sda6            3828        7091    26218048+   7  HPFS/NTFS

/dev/sda7            7092       11791    37752718+   7  HPFS/NTFS

/dev/sda8           11792       12449     5285353+   b  W95 FAT32

/dev/sda9           12450       12462      104391   83  Linux

/dev/sda10          12463       14247    14337981   83  Linux

/dev/sda11          14248       14312      522081   82  Linux swap / Solaris

[root@localhost ~]# fdisk /dev/sda

The number of cylinders for this disk is set to 14593.

There is nothing wrong with that, but this is larger than 1024,

and could in certain setups cause problems with:

1) software that runs at boot time (e.g., old versions of LILO)

2) booting and partitioning software from other OSs

(e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): n

Command action

l   logical (5 or over)

p   primary partition (1-4)

l

First cylinder (14313-14593, default 14313):

Using default value 14313

Last cylinder or +size or +sizeM or +sizeK (14313-14593, default 14593): +520M

Command (m for help): n

Command action

l   logical (5 or over)

p   primary partition (1-4)

l

First cylinder (14377-14593, default 14377):

Using default value 14377

Last cylinder or +size or +sizeM or +sizeK (14377-14593, default 14593): +320M

Command (m for help): n

Command action

l   logical (5 or over)

p   primary partition (1-4)

l

First cylinder (14417-14593, default 14417):

Using default value 14417

Last cylinder or +size or +sizeM or +sizeK (14417-14593, default 14593): +50M

Command (m for help): n

Command action

l   logical (5 or over)

p   primary partition (1-4)

l

First cylinder (14424-14593, default 14424):

Using default value 14424

Last cylinder or +size or +sizeM or +sizeK (14424-14593, default 14593): +30M

Command (m for help): n

Partition number (1-4): 1     #为什么从这里就没有l   logical (5 or over)的选项了？剩下的空间如何才能分区呢？

Partition 1 is already defined.  Delete it before re-adding it.

Command (m for help): n

Partition number (1-4): 2

Partition 2 is already defined.  Delete it before re-adding it.

Command (m for help): n

Partition number (1-4): 3

No free sectors available

Command (m for help): n

Partition number (1-4): 4

No free sectors available

Command (m for help):

[本帖最后由 tam509 于 2009-5-8 09:30 编辑]