Setp 1.路由器基本配置
r1(config)#show ip int b
InterfaceIP-Address OK? Method Status Protocol
FastEthernet0/0192.168.1.254 YES manual up up
FastEthernet1/0192.168.10.254 YES manual up up
r1(config)#exit
r1#ping 192.168.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 20/53/76 ms
r1#ping 192.168.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.10.1, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 40/67/96 ms
r2#show ip int b
InterfaceIP-Address OK? Method Status Protocol
FastEthernet0/0192.168.1.253 YES manual up up
FastEthernet1/0192.168.10.253 YES manual up up
r2#ping 192.168.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 28/47/72 ms
r2#ping 192.168.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.10.1, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 36/42/48 ms
Setp 2.ACS基本配置
1.安装AD-benet.com
2.安装ACS(必需安装java)