51单片机c语言头文件大全,自制51单片机常用头文件(T6963C)

#include "reg51.h"

#define uint unsigned int

#define uchar unsigned char本文引用地址：http://www.eepw.com.cn/article/201611/317354.htm

code uchar CCTAB [1024]={

/*-- 宽度x高度=128x64 --*/

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,

0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,

0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,

0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,

0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,

0x00,0xF0,0x00,0x00,0x15,0x2A,0x00,0x00,0xF0,0x00,0x00,0xA8,0xA0,0x00,0x7C,0x00,

0x00,0xF0,0x00,0x00,0x00,0x55,0x00,0x03,0xC0,0x1F,0x00,0x54,0x00,0x00,0x7C,0x00,

0x00,0xF1,0xFF,0xFF,0x94,0xAA,0x0F,0xC7,0x80,0x11,0x80,0xA8,0xA9,0xFC,0x7C,0x00,

0x00,0xF3,0xFF,0xFF,0xA8,0x55,0x03,0xFF,0xF8,0x60,0xC0,0x51,0x54,0xFE,0x7C,0x00,

0x00,0xF3,0x00,0x00,0x14,0xAA,0x0F,0xFF,0xC0,0xDC,0x40,0x02,0xAA,0x06,0x7C,0x00,

0x00,0xF2,0x01,0x40,0x28,0x50,0x01,0xFF,0xFF,0xBE,0x41,0x45,0x54,0x06,0x7C,0x00,

0x00,0xF0,0xA2,0xA0,0x00,0x07,0xDF,0xFF,0x00,0x7E,0x62,0xA2,0xAA,0x06,0x7C,0x00,

0x00,0xF1,0x51,0x40,0x00,0x18,0xFF,0xFE,0x00,0x7E,0x21,0x45,0x54,0x06,0x7C,0x00,

0x00,0xF0,0xA2,0x80,0x00,0x21,0x9F,0xFC,0x00,0x1F,0x22,0xA2,0xAA,0x06,0x7C,0x00,

0x00,0xF1,0x50,0x00,0x00,0x46,0x3F,0xFC,0x00,0x07,0x21,0x45,0x54,0x06,0x7C,0x00,

0x00,0xF0,0xA2,0xA0,0x00,0x5C,0x7F,0x78,0x00,0x03,0x20,0x02,0xA8,0x06,0x7C,0x00,

0x00,0xF0,0x05,0x50,0x00,0x38,0xEE,0x78,0x00,0x00,0x60,0x01,0x50,0x06,0x7C,0x00,

0x00,0xF2,0x0A,0xA0,0x00,0x30,0xDC,0x70,0x00,0x00,0x30,0x00,0x00,0x06,0x7C,0x00,

0x00,0xF5,0x15,0x50,0x00,0x61,0x98,0x70,0x00,0x00,0x18,0x00,0x00,0x06,0x7C,0x00,

0x00,0xF2,0xAA,0xA0,0x00,0xC1,0x38,0x60,0x00,0x00,0x0C,0x00,0x00,0x00,0x7C,0x00,

0x00,0xF5,0x15,0x50,0x01,0x82,0x30,0x60,0x00,0x00,0x04,0x00,0x00,0x14,0x7C,0x00,

0x00,0xF0,0x2A,0xA0,0x53,0x02,0x20,0x40,0x00,0x00,0x06,0x00,0x00,0x2A,0x7C,0x00,

0x00,0xF3,0x15,0x40,0xA2,0x00,0x20,0x40,0x00,0x00,0x0E,0x00,0x0A,0x14,0x7C,0x00,

0x00,0xF3,0x2A,0x80,0x56,0x00,0x00,0x40,0x00,0x00,0x1F,0x00,0x15,0x2A,0x7C,0x00,

0x00,0xF3,0x15,0x00,0xA4,0x00,0x00,0x00,0x00,0x00,0x39,0x00,0x0A,0x14,0x7C,0x00,

0x00,0xF3,0x00,0x00,0x0C,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x15,0x00,0x7C,0x00,

0x00,0xF3,0x00,0x00,0x0C,0x00,0x00,0x00,0x00,0x00,0x03,0x80,0x0A,0x15,0x7C,0x00,

0x00,0xF3,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x2A,0xFC,0x00,

0x00,0xF3,0x00,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x0E,0x80,0x00,0x55,0x7C,0x00,

0x00,0xF3,0x00,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0x28,0xAA,0xFC,0x00,

0x00,0xF3,0x00,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0x50,0x55,0x7C,0x00,

0x00,0xF3,0x00,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x01,0xC0,0x28,0xAA,0xFC,0x00,

0x00,0xF3,0x00,0x14,0x08,0x00,0x00,0x00,0x00,0x00,0x03,0xC0,0x50,0x55,0x7C,0x00,

0x00,0xF3,0x00,0x28,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0x00,0xAA,0xFC,0x00,

0x00,0xF3,0x05,0x14,0x07,0xFC,0x0F,0xFF,0xF0,0x80,0x18,0xC0,0x00,0x55,0x7C,0x00,

0x00,0xF3,0x0A,0xA8,0x0C,0x1C,0x08,0x00,0x1F,0x80,0x78,0xC0,0x00,0x2A,0x7C,0x00,

0x00,0xF3,0x15,0x00,0x0C,0x08,0x08,0x00,0x1C,0x80,0x78,0xC0,0x00,0x00,0x7C,0x00,

0x00,0xF3,0x0A,0x80,0x0A,0x10,0x04,0x00,0x0C,0x80,0x72,0xC0,0x00,0x06,0x7C,0x00,

0x00,0xF3,0x15,0x15,0x19,0xC0,0x03,0x00,0x03,0x00,0x3E,0xC0,0x00,0x06,0x7C,0x00,

0x00,0xF3,0x0A,0x2A,0x90,0x3E,0x00,0xFF,0xFC,0x00,0x7C,0x81,0x40,0x06,0x7C,0x00,

0x00,0xF3,0x00,0x55,0x50,0x3D,0x00,0x00,0x00,0x00,0x7C,0x80,0xA0,0x06,0x7C,0x00,

0x00,0xF3,0x28,0xAA,0x90,0x1F,0x00,0x00,0x00,0x00,0x79,0xA9,0x40,0x06,0x7C,0x00,

0x00,0xF3,0x54,0x55,0x53,0x1C,0x1C,0x01,0x50,0x00,0x3D,0x50,0xA0,0x06,0x7C,0x00,

0x00,0xF3,0x28,0xAA,0x9C,0x08,0x03,0x82,0xA8,0x00,0x7F,0x28,0x00,0x06,0x7C,0x00,

0x00,0xF3,0x50,0x55,0x19,0x08,0x00,0x71,0x50,0x00,0x7A,0x50,0x00,0x06,0x7C,0x00,

0x00,0xF3,0x00,0xAA,0x2A,0x08,0x7C,0x0C,0x00,0x00,0x66,0x01,0x50,0x06,0x7C,0x00,

0x00,0xF3,0x00,0x54,0x4D,0x08,0x03,0x02,0x00,0x00,0x0C,0x02,0xA8,0x06,0x7C,0x00,

0x00,0xF3,0xFF,0x28,0x16,0x08,0x38,0xC1,0x00,0x00,0x18,0x85,0x55,0xFE,0x7C,0x00,

0x00,0xF1,0xFF,0x80,0x87,0x08,0x06,0x30,0x00,0x00,0x31,0x4A,0xA9,0xFC,0x7C,0x00,

0x00,0xF0,0x00,0x00,0x29,0xCC,0x01,0x08,0x80,0x00,0xE2,0x85,0x54,0x00,0x7C,0x00,

0x00,0xF0,0x00,0x00,0x00,0x7E,0x00,0x84,0x00,0x03,0x81,0x4A,0xA8,0x00,0x7C,0x00,

0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,

0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,

0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,

0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};

uchar column; // 横坐标

uchar line; // 纵坐标

uchar code1; // 代码寄存器

sbit LCD_WR = P3^2; // 写操作信号

sbit LCD_RD = P3^3; // 读操作信号

sbit LCD_CD = P3^4; // 通道选择信号

sbit LCD_DATA = P1; // 数据端口

//指令&数据读写状态

void CheckRW(void)

{

do

{

LCD_DATA = 0XFF; // LCD_DATA口置"1"

LCD_CD = 0X01; // 指令写入通道

LCD_RD = 0X00; // RD=0

ACC = LCD_DATA; // 读操作

LCD_RD = 0X01; // RD=1

}

while ((ACC&0x03) != 0X03); // 低电平忙

}

//数据自动写状态

void AutoWrite(void)

{

do

{

LCD_DATA = 0XFF; // LCD_DATA口置"1"

LCD_CD= 0X01; // 指令写入通道

LCD_RD = 0X00; // RD=0

ACC = LCD_DATA; // 读操作

LCD_RD = 0X01; // RD=1

}

while((ACC&0X08)!= 0x08); // 低电平忙

}

//数据写入函数

void WriteData(uchar uData)

{

CheckRW(); // 指令&数据读写状态

ACC = uData; // 暂存累加器

LCD_CD = 0X00; // 数据写入通道

LCD_DATA = ACC; // 读取数据

LCD_WR = 0X00; // WR=0

LCD_WR = 0X01; // WR=1

}

//无参指令写入函数

void WriteCom(uchar Command)

{

CheckRW(); // 检测指令读写状态

LCD_DATA = Command; // 指令写入

LCD_WR = 0X00; // WR=0

LCD_WR = 0X01; // WR=1

}

//单参数指令写入函数

void WriteCom1(uchar Par,uchar Com)

{

CheckRW(); // 检测指令读写

WriteData(Par); // 数据写入

CheckRW(); // 检测指令读写

WriteCom(Com); // 指令写入

}

//双参数指令写入函数

void WriteCom2(uchar Par1,uchar Par2,uchar Comd)

{

CheckRW(); // 检测指令读写

WriteData(Par1); // 数据写入

CheckRW(); // 检测指令读写

WriteData(Par2); // 数据写入

CheckRW(); // 检测指令读写

WriteCom(Comd); // 指令写入

}

//LCM初始化函数

void LcmInit( void )

{

WriteCom2(0x00,0x00,0x40); // 设置文本显示区首地址

WriteCom2(0x10,0x00,0x41); // 设置文本显示区宽度

WriteCom2(0x00,0x08,0x42); // 设置图形显示区首地址0x0800

WriteCom2(0x10,0x00,0x43); // 设置图形显示区宽度

WriteCom(0xA7); // 设置光标形状 8x8方块

WriteCom(0x80); // 显示方式设置 文本xor图形

WriteCom(0x98); // 显示开关设置 文本开,图形开,光标闪烁关

}

//清显示存储器函数

void LcmClear( uchar FillByte )

{

uint i = 8192; // 此处仅清8K RAM,如果32K RAM都使用,请修改i=32768

WriteCom2(0x00,0x08,0x24);

WriteCom(0xB0); // 进入自动写

while(i--)

{

AutoWrite(); // 数据自动写状态

WriteData( FillByte ); // 写入数据

}

WriteCom(0xB2); // 退出自动写

}

//设定显示地址函数

void LocateXY(uchar x,uchar y,uchar mode)

{

if (mode) // mode=1为图形方式

{

y += 0x08; // 如果图形模式要加上图形区首地址0x0800

column = x;

line = y;

}

else

{

; // 否则什么都不做

}

}

//图形写入函数

void WriteTX( void )

{

uint i = 0;

LocateXY(0x00,0x00,1); // 计算图形显示区首地址为0800H

WriteCom2(column,line,0x24); // 设置显示RAM地址

while (i < 1024)

{

WriteCom1(CCTAB[i++],0xC0);

}

}

//主程序

void main( )

{

P3 = 0X1C; // 间接控制方式控制线初始化

LcmInit (); // 初始化

LcmClear (0X00); // 清屏

WriteTX(); // 图形演示

while(1)

{

;

}

}