成型滤波器设计matlab,MATLAB+VHDL脉冲成型滤波器的设计 附代码

附 录

FIR_filter_tb.v

// --------------------------------------------------------------------

// >>>>>>>>>>>>>>>>>>>>>>>>> COPYRIGHT NOTICE <<<<<<<<<<<<<<<<<<<<<<<<<

// --------------------------------------------------------------------

// Module: FIR_filter_tb

//

// Author: Step

//

// Description: FIR_filter_tb

//

// --------------------------------------------------------------------

// Code Revision History :

// --------------------------------------------------------------------

`timescale 1ps/1ps

module FIR_filter_tb;

parameter PERIOD = 20;

reg clk, rst_n;

wire signed [26:0] data_out;

initial begin

clk = 0;

rst_n = 0;

#100;

rst_n = 1;

#6000;

$stop;

end

always #10 clk = ~clk;

wire signed[9:0] data1;

DDS dds_24k

(

.clk_in(clk), //clock in

.rst_n_in(rst_n), //reset, active low

.dds_en_in(1), //dds work enable

.f_increment(24'h60000), //frequency increment

.p_increment(0), //phase increment

.dac_data_out(data1) //data out

);

wire signed[9:0] data2;

DDS dds_240k

(

.clk_in(clk), //clock in

.rst_n_in(rst_n), //reset, active low

.dds_en_in(1), //dds work enable

.f_increment(24'h3c0000), //frequency increment

.p_increment(0), //phase increment

.dac_data_out(data2) //data out

);

wire signed[10:0] data_in = data1 + data2;

FIR_Filter u0 (

.ast_sink_data (data_in), // avalon_streaming_sink.data

.ast_sink_valid (1), // .valid

.ast_sink_error (0), // .error

.ast_source_data (data_out), // avalon_streaming_source.data

.ast_source_valid (), // .valid

.ast_source_error (), // .error

.clk (clk), // clk.clk

.reset_n (rst_n) // rst.reset_n

);

endmodule

DDS.v

// --------------------------------------------------------------------

// >>>>>>>>>>>>>>>>>>>>>>>>> COPYRIGHT NOTICE <<<<<<<<<<<<<<<<<<<<<<<<<

// --------------------------------------------------------------------

// Module: DDS

//

// Author: Step

//

// Description: DDS

//

// --------------------------------------------------------------------

// Code Revision History :

// --------------------------------------------------------------------

module DDS

(

input clk_in, //clock in

input rst_n_in, //reset, active low

input dds_en_in, //dds work enable

input [23:0] f_increment, //frequency increment

input [23:0] p_increment, //phase increment

output dac_clk_out, //clock out

output [9:0] dac_data_out //data out

);

reg [23:0] phase_accumulator;

wire [23:0] phase;

//wire [9:0] dac_data_out;

assign dac_clk_out = clk_in;

//next_phase = phase_accumulator + f_increment;

always @(posedge clk_in or negedge rst_n_in)

begin

if(!rst_n_in) phase_accumulator <= 23'b0;

else if(dds_en_in) phase_accumulator <= phase_accumulator + f_increment;

end

assign phase = phase_accumulator + p_increment; // phase is the high 8 bits

lookup_table lookup_table_uut

(

.phase(phase[23:16]),

.dac_data_out(dac_data_out)

);

endmodule

/**************************************************

module: lookup_table

**************************************************/

module lookup_table

(

input [7:0] phase,

output reg [9:0] dac_data_out

);

wire [5:0] address = phase[5:0];

wire [1:0] sel = phase[7:6];

wire [9:0] sine;

always@(sel or sine)

case (sel)

2'b00 : dac_data_out = {1'b0, sine[9:1]};

2'b01 : dac_data_out = {1'b0, sine[9:1]};

2'b10 : dac_data_out = {1'b1, 9'h1ff-sine[9:1]};

2'b11 : dac_data_out = {1'b1, 9'h1ff-sine[9:1]};

endcase

sine_table sine_table_uut

(

.sel(sel),

.address(address),

.sine(sine)

);

endmodule

/**************************************************

module: sine_table

**************************************************/

module sine_table

(

input [1:0] sel,

input [5:0] address,

output reg [9:0] sine

);

reg [5:0] table_addr;

always @(sel or address)

case (sel)

2'b00: table_addr = address;

2'b01: table_addr = 6'h3f - address;

2'b10: table_addr = address;

2'b11: table_addr = 6'h3f - address;

endcase

always @(table_addr)

case(table_addr)

6'h0: sine=10'h000;

6'h1: sine=10'h019;

6'h2: sine=10'h032;

6'h3: sine=10'h04B;

6'h4: sine=10'h064;

6'h5: sine=10'h07D;

6'h6: sine=10'h096;

6'h7: sine=10'h0AF;

6'h8: sine=10'h0C4;

6'h9: sine=10'h0E0;

6'ha: sine=10'h0F9;

6'hb: sine=10'h111;

6'hc: sine=10'h128;

6'hd: sine=10'h141;

6'he: sine=10'h159;

6'hf: sine=10'h170;

6'h10: sine=10'h187;

6'h11: sine=10'h19F;

6'h12: sine=10'h1B5;

6'h13: sine=10'h1CC;

6'h14: sine=10'h1E2;

6'h15: sine=10'h1F8;

6'h16: sine=10'h20E;

6'h17: sine=10'h223;

6'h18: sine=10'h238;

6'h19: sine=10'h24D;

6'h1a: sine=10'h261;

6'h1b: sine=10'h275;

6'h1c: sine=10'h289;

6'h1d: sine=10'h29C;

6'h1e: sine=10'h2AF;

6'h1f: sine=10'h2C1;

6'h20: sine=10'h2D3;

6'h21: sine=10'h2E5;

6'h22: sine=10'h2F6;

6'h23: sine=10'h307;

6'h24: sine=10'h317;

6'h25: sine=10'h326;

6'h26: sine=10'h336;

6'h27: sine=10'h344;

6'h28: sine=10'h353;

6'h29: sine=10'h360;

6'h2a: sine=10'h36D;

6'h2b: sine=10'h37A;

6'h2c: sine=10'h386;

6'h2d: sine=10'h392;

6'h2e: sine=10'h39C;

6'h2f: sine=10'h3A7;

6'h30: sine=10'h3B1;

6'h31: sine=10'h3BA;

6'h32: sine=10'h3C3;

6'h33: sine=10'h3CB;

6'h34: sine=10'h3D3;

6'h35: sine=10'h3DA;

6'h36: sine=10'h3E0;

6'h37: sine=10'h3E6;

6'h38: sine=10'h3EB;

6'h39: sine=10'h3F0;

6'h3a: sine=10'h3F3;

6'h3b: sine=10'h3F7;

6'h3c: sine=10'h3FA;

6'h3d: sine=10'h3FC;

6'h3e: sine=10'h3FE;

6'h3f: sine=10'h3FF;

endcase

endmodule