linux7 kvm联网,centos7 链路聚合+KVM桥接连网

一、两个物理网卡做链路聚合(em3,em4)

1)创建team类型的网卡，连接别名为team0,使用的模式为activebackup-主备/loadbalance-负载均衡

nmcli con add type team con-name team0 ifname team0 config '{"runner": {"name":"loadbalance"}}'

2)根据题目要求给team0网卡绑定指定的IP

nmcli con mod team0 ipv4.addresses '192.168.1.100/24' ipv4.method manual connection.autoconnect yes

3)给team0虚拟接口添加网卡

nmcli connection add type team-slave con-name team-port1 ifname em3 master team0

nmcli connection add type team-slave con-name team-port2 ifname em4 master team0

4)设置虚拟接口网关

nmcli connection modify team0 ipv4.gateway "192.168.1.1"

5)设置虚拟接口DNS

nmcli connection modify team0 ipv4.dns "192.168.1.216 8.8.8.8"

6)启动

nmcli connection up team0-port1

nmcli connection up team0-port2

nmcli connection up team0

#查看虚拟接口状态

teamdctl team0 state view

#查看虚拟接口参数

teamnl team0 options

#查看虚拟接口

teamnl team0 ports

二、新建一个桥设备

[root@localhost network-scripts]# cat ifcfg-br1

DEVICE=br1

TYPE=Bridge

BOOTPROTO=static

IPADDR=192.168.1.100

NETMASK=255.255.255.0

GATEWAY=192.168.1.1

DNS1=192.168.1.216

DNS2=202.96.128.86

ONBOOT=yes

三、修改team0聚合网卡 注释#IPADDR=192.168.1.100

[root@localhost network-scripts]# cat ifcfg-team0

TEAM_CONFIG="{\"runner\": {\"name\": \"loadbalance\", \"tx_hash\": [\"eth\", \"ipv4\", \"ipv6\"]}}"

PROXY_METHOD=none

BROWSER_ONLY=no

BOOTPROTO=none

DEFROUTE=yes

IPV4_FAILURE_FATAL=no

IPV6INIT=yes

IPV6_AUTOCONF=yes

IPV6_DEFROUTE=yes

IPV6_FAILURE_FATAL=no

IPV6_ADDR_GEN_MODE=stable-privacy

NAME=team0

UUID=**********************************

DEVICE=team0

ONBOOT=yes

DEVICETYPE=Team

#IPADDR=192.168.1.100

PREFIX=24

四、修改虚拟机 virsh # edit jumpserver 这样虚拟机重启起后会自动加入br1桥。

改为

五、通过brctl桥命令来完成以下工作，重启后失效。要修配置文件才不会(修改/etc/sysconfig/network-scripts下网卡)

[root@localhost network-scripts]# brctl show

重启网络服务

标签：网卡,name,KVM,team0,192.168,centos7,connection,链路,team

来源： https://www.cnblogs.com/centos-kang/p/11942814.html