rgb灯板Android程序,【图片】RGBW智能小夜灯程序则最近搞这玩意硬件真难搞【技术宅吧】_百度贴吧...

该楼层疑似违规已被系统折叠 隐藏此楼查看此楼

//负熵生之光

#include

SoftwareSerial BTserial(7, 8); // 建立SoftwareSerial对象，RX引脚8, TX引脚7

int r , g , b ;

const int W = 3 ; int A = 0; // 开关计数返回值

const int R = 9 ; const int C = 4; // 红外感应模块

const int G = 6 ; const int KG=12; // 分级开关

const int B = 5 ; const int E = 6; // RGBW选项

const int M = A0; const int K = A1; //光敏模块 声音模块

int f = 0 ; const int NE= 2; //W 亮度值 RGBW驱动使能

const int fan=10; const int rm= A2; //散热风扇 热敏电阻

int X[3]={ 9,6,5 }; //RGB引脚数组

unsigned long te ; //开始时间

void setup()

{ BTserial.begin(9600);

Serial.begin(9600);

pinMode(NE,OUTPUT);

pinMode(W, OUTPUT); pinMode(R, OUTPUT);

pinMode(G, OUTPUT); pinMode(B, OUTPUT);

pinMode(M, INPUT ); pinMode(K, INPUT );

pinMode(KG, INPUT_PULLUP); pinMode(C, INPUT );

r=0; g=0; b=0;

}

void loop(){

sanre(); //散热风扇

switch (ScanKey()) {

case 0 : ganyin(); break;

case 1 : col(0,0,0,f) ; shijian ( 2 ); break;

case 2 : col(0,10,10,190); shijian ( 2 ); break;

case 3 : col(0,0,0, 220); shijian ( 2 ); break;

case 4 : col(0,0,0, 255); shijian ( 1 ); break;

case 5 : col(0,200,200,250); shijian ( 1 ); break;

case 6 : RGBW(); shijian ( 2 ); break;

default: col(0,0,0,0); digitalWrite(NE, LOW);

r=0; g=0; b=0; A = 0; f=0; break;

}

}

//蓝牙控制

void BT() {

if( BTserial.available()>0 ) { //如果软件串口有HC-06发来的数据

if( BTserial.read()==':' ) {

r = BTserial.parseInt();

g = BTserial.parseInt();

b = BTserial.parseInt();

if ( BTserial.read()==';' ) {

col(r,g,b,0);

}

}

}

}

//温度控制

void sanre(){

if(analogRead(rm)<420){

if(analogRead(rm)<405){

if(analogRead(rm)<385){

digitalWrite(NE, LOW);}

digitalWrite(fan, HIGH);}

analogWrite(fan, 160);

}else{

analogWrite(fan , 0);

}

}

//时间控制

void shijian (int t){

unsigned long tme = millis();

if( (tme - te )>(t*3600*1000)){

A=0;

}

}

//按键控制

int ScanKey()

{ //按键扫描函数 接上拉电阻 按键导通INPUT低电平到单片机

if (digitalRead(KG) == LOW || analogRead(M)>600 ) {

delay(50);

if (digitalRead(KG) == LOW || analogRead(K)>255 ) {

A++;

while (digitalRead(KG) == LOW || analogRead(M)>666 );

}

}

return A;

}

//红外感应控制

void ganyin(){

te= millis();

if(analogRead(M)>700&&digitalRead(C)==HIGH){

col(0,0,0,f); //RGBW

}else{

BT();

}

}

//RGBW组件

void col(int r,int g,int b,int w){

digitalWrite(NE, HIGH);

if(f<160){delay(4); f++; }

analogWrite(R, r); analogWrite(G, g);

analogWrite(B, b); analogWrite(W, w);

}

//呼吸灯组件

void rgbw(int n) {

int c = 12;

for (int a = 200; a >= 0; a -= 1) {

analogWrite(n, a);

unsigned long oldtime = millis();

while (millis() - oldtime < c){

if (ScanKey() != E){

return;

}

}

oldtime = millis();

}

for (int a = 0; a <= 200; a +=1) {

analogWrite(n, a);

unsigned long oldtime = millis();

while (millis() - oldtime < c){

if (ScanKey() != E){

return;

}

}

oldtime = millis();

}

}

//呼吸灯组件

int RGBW()

{

digitalWrite(NE, HIGH);

for (size_t i = 0; i < 3; i++)

{

if (i == 0) {

rgbw(X[0]);

if (ScanKey() != E){

col(0,0,0,0); //熄灭

return 0;

}

}

else if (i == 1){

rgbw(X[1]);

if (ScanKey() != E){

col(0,0,0,0); //熄灭

return 0;

}

}

else{

rgbw(X[2]);

if (ScanKey() != E){

col(0,0,0,0); //熄灭

return 0;

}

}

}

}