转载自:http://uule.iteye.com/blog/1101994
thread.Join把指定的线程加入到当前线程,可以将两个交替执行的线程合并为顺序执行的线程。比如在线程B中调用了线程A的Join()方法,直到线程A执行完毕后,才会继续执行线程B。
t.join(); //使调用线程 t 在此之前执行完毕。
t.join(1000); //等待 t 线程,等待时间是1000毫秒
先上一段JDK中代码:
Java代码
/**
* Waits at most millis
milliseconds for this thread to
* die. A timeout of 0
means to wait forever.
*/
//此处A timeout of 0 means to wait forever 字面意思是永远等待,其实是等到t结束后。
publicfinalsynchronizedvoidjoin(longmillis)throwsInterruptedException {
longbase = System.currentTimeMillis();
longnow =0;
if(millis <0) {
thrownewIllegalArgumentException("timeout value is negative");
}
if(millis ==0) {
while(isAlive()) {
wait(0);
}
} else{
while(isAlive()) {
longdelay = millis - now;
if(delay <=0) {
break;
}
wait(delay);
now = System.currentTimeMillis() - base;
}
}
}
从代码上看,如果线程被生成了,但还未被起动,调用它的
join()
方法是没有作用的,将直接继续向下执行
Join方法实现是通过wait(小提示:Object 提供的方法)。 当main线程调用t.join时候,main线程会获得线程对象t的锁(wait 意味着拿到该对象的锁),调用该对象的wait(等待时间),直到该对象唤醒main线程
,比如退出后。这就意味着main
线程调用t.join时,必须能够拿到线程t对象的锁
Example1:
Java代码
publicclassJoinTestimplementsRunnable{
publicstaticinta =0;
publicvoidrun() {
for(intk =0; k <5; k++) {
a = a + 1;
}
}
publicstaticvoidmain(String[] args)throwsException {
Runnable r = newJoinTest();
Thread t = newThread(r);
t.start();
System.out.println(a);
}
}
请
问程序的输出结果是5吗?答案是:有可能。其实你很难遇到输出5的时候,通常情况下都不是5。当然这也和机器有严重的关系。为什么呢?我的解释是当
主线程
main方法执行System.out.println(a);这条语句时,线程还没有真正开始运行,或许正在为它分配资源准备运行。因为为线程分配资源
需要时间,而main方法执行完t.start()方法后继续往下执行System.out.println(a);,这个时候得到的结果是a还没有被
改变的值0
。怎样才能让输出结果为5!其实很简单,join() 方法提供了这种功能。join() 方法,它能够使调用该方法的线程在此之前执行完毕。
Java代码
publicstaticvoidmain(String[] args)throwsException {
Runnable r = newJoinTest();
Thread t = newThread(r);
t.start();
t.join(); //加入join()
System.out.println(a);
}
这个时候,程序输入结果始终为5。
为
了证明如果不使用t.join()方法,主线程main方法的System.out.println(a);语句将抢先执行,我们可以在main方法中加
入一个循环,这个循环用来延长main方法执行的时间,循环次数将严重取决于机器性能。如果循环次数得当,我们也可以看到a的输出结果是5。
Java代码
publicstaticvoidmain(String[] args)throwsException {
Runnable r = newJoinTest();
Thread t = newThread(r);
t.start();
//t.join(); //加入join()
/*
注意循环体内一定要有实际执行语句,否则编译器或JVM可能优化掉你的这段代码,视这段代
码为无效。
*/
for(inti=0; i<300; i++) {
System.out.print(i);
}
System.out.println();
System.out.println(a);
}
经自己测试,最后a一直是5.
Example2:join(n)
Java代码
classRunnableImplimplementsRunnable {
publicvoidrun() {
try{
System.out.println("Begin sleep");
Thread.sleep(1000);
System.out.println("End sleep");
} catch(InterruptedException e) {
e.printStackTrace();
}
}
}
Java代码
publicclassJoinTest{
publicstaticvoidmain(String[] args) {
Thread t = newThread(newRunnableImpl());
t.start();
try{
t.join(1000);
System.out.println("joinFinish");
} catch(InterruptedException e) {
e.printStackTrace();
}
}
}
结果是:
Begin sleep
End sleep
joinFinish
明白了吧,当main线程调用t.join时,main线程等待t线程,等待时间是1000,如果t线程Sleep 2000呢
Java代码
classRunnableImplimplementsRunnable {
publicvoidrun() {
try{
System.out.println("Begin sleep");
Thread.sleep(2000);//原来为1000
System.out.println("End sleep");
} catch(InterruptedException e) {
e.printStackTrace();
}
}
}
结果是:
Begin sleep
joinFinish
End sleep
也就是说main线程只等1000毫秒,不管T什么时候结束.
Example3:
Java代码
classCustomThread1extendsThread {
publicvoidrun() {
String threadName = Thread.currentThread().getName();
System.out.println(threadName + " start.");
try{
for(inti =0; i <5; i++) {
System.out.println(threadName + " loop at "+ i);
Thread.sleep(1000);
}
System.out.println(threadName + " end.");
} catch(Exception e) {
System.out.println("Exception from "+ threadName +".run");
}
}
}
classCustomThreadextendsThread {
CustomThread1 t1;
publicCustomThread(CustomThread1 t1) {
this.t1 = t1;
}
publicvoidrun() {
String threadName = Thread.currentThread().getName();
System.out.println(threadName + " start.");
try{
t1.join();
System.out.println(threadName + " end.");
} catch(Exception e) {
System.out.println("Exception from "+ threadName +".run");
}
}
}
publicclassJoinTestDemo {
publicstaticvoidmain(String[] args) {
String threadName = Thread.currentThread().getName();
System.out.println(threadName + " start.");
CustomThread1 t1 = newCustomThread1();
CustomThread t = newCustomThread(t1);
try{
t1.start();
Thread.sleep(2000);
t.start();
t.join(); //在代碼2里,將此處注釋掉
} catch(Exception e) {
System.out.println("Exception from main");
}
System.out.println(threadName + " end!");
}
}
结果:
main start. //main方法所在的线程起动,但没有马上结束,因为调用t.join();,所以要等到t结束了,此线程才能向下执行。
[CustomThread1] Thread start. //线程CustomThread1起动
[CustomThread1] Thread loop at 0 //线程CustomThread1执行
[CustomThread1] Thread loop at 1 //线程CustomThread1执行
[CustomThread] Thread start. //线程CustomThread起动,但没有马上结束,因为调用t1.join();,所以要等到t1结束了,此线程才能向下执行。
[CustomThread1] Thread loop at 2 //线程CustomThread1继续执行
[CustomThread1] Thread loop at 3 //线程CustomThread1继续执行
[CustomThread1] Thread loop at 4 //线程CustomThread1继续执行
[CustomThread1] Thread end. //线程CustomThread1结束了
[CustomThread] Thread end. // 线程CustomThread在t1.join();阻塞处起动,向下继续执行的结果
main end! //线程CustomThread结束,此线程在t.join();阻塞处起动,向下继续执行的结果。
将上例中的join注释掉:
Java代码
publicclassJoinTestDemo {
publicstaticvoidmain(String[] args) {
String threadName = Thread.currentThread().getName();
System.out.println(threadName + " start.");
CustomThread1 t1 = newCustomThread1();
CustomThread t = newCustomThread(t1);
try{
t1.start();
Thread.sleep(2000);
t.start();
//t.join();
} catch(Exception e) {
System.out.println("Exception from main");
}
System.out.println(threadName + " end!");
}
}
结果:
main start. // main方法所在的线程起动,但没有马上结束,这里并不是因为join方法,而是因为Thread.sleep(2000);
[CustomThread1] Thread start. //线程CustomThread1起动
[CustomThread1] Thread loop at 0 //线程CustomThread1执行
[CustomThread1] Thread loop at 1 //线程CustomThread1执行
main end! // Thread.sleep(2000);结束,虽然在线程CustomThread执行了t1.join();,但这并不会影响到其他线程(这里main方法所在的线程)。
[CustomThread] Thread start. //线程CustomThread起动,但没有马上结束,因为调用t1.join();,所以要等到t1结束了,此线程才能向下执行。
[CustomThread1] Thread loop at 2 //线程CustomThread1继续执行
[CustomThread1] Thread loop at 3 //线程CustomThread1继续执行
[CustomThread1] Thread loop at 4 //线程CustomThread1继续执行
[CustomThread1] Thread end. //线程CustomThread1结束了
[CustomThread] Thread end. // 线程CustomThread在t1.join();阻塞处起动,向下继续执行的结果
Example4
:
main
线程调用t.join时,必须能够拿到线程t对象的锁,如果拿不到它是无法wait的
,刚开的例子t.join(1000)不是说明了main线程等待1
秒,如果在它等待之前,其他线程获取了t对象的锁,它等待时间可不就是1毫秒了
。
Java代码
classRunnableImplimplementsRunnable {
publicvoidrun() {
try{
System.out.println("Begin sleep");
Thread.sleep(2000);
System.out.println("End sleep");
} catch(InterruptedException e) {
e.printStackTrace();
}
}
}
Java代码
classThreadTestextendsThread {
Thread thread;
publicThreadTest(Thread thread) {
this.thread = thread;
}
@Override
publicvoidrun() {
synchronized(thread) {
System.out.println("getObjectLock");
try{
Thread.sleep(9000);
} catch(InterruptedException ex) {
ex.printStackTrace();
}
System.out.println("ReleaseObjectLock");
}
}
}
Java代码
publicclassJoinTest {
publicstaticvoidmain(String[] args) {
Thread t = newThread(newRunnableImpl());
newThreadTest(t).start();
t.start();
try{
t.join();
System.out.println("joinFinish");
} catch(InterruptedException e) {
e.printStackTrace();
}
}
}
结果:
getObjectLock
Begin sleep
End sleep
ReleaseObjectLock
joinFinish
在main方法中
通过new
ThreadTest(t).start()实例化
ThreadTest
线程对象, 它
通过
synchronized
(thread)
,获取线程对象t的锁,并Sleep(9000)后释放,这就意味着,即使main方法t.join(1000)等待一秒钟,它必须等待ThreadTest
线程释放t锁后才能进入wait方法中,它实际等待时间是9000+1000ms。
例子参考Example2来源.