ensp 路由表_eNSP配置静态路由实例

1、静态路由

静态路由的路由项需要手动添加，而非动态路由，其是固定的，不会改变。

2、静态路由配置实例

(1)实验拓扑如下图所示：

(2)配置命令

AR1配置命令：

system-view      #进入系统界面

[Huawei]interface GigabitEthernet 0/0/0        #  进入G端口

[Huawei-GigabitEthernet0/0/0]ip addr 10.1.1.1 24           # 配置G端口的IP地址和子网掩码

[Huawei-GigabitEthernet0/0/0]quit         #    返回上一界面

[Huawei]interface GigabitEthernet 0/0/1

[Huawei-GigabitEthernet0/0/1]ip addr 1.1.1.1 24

[Huawei-GigabitEthernet0/0/1]quit

[Huawei]ip route-static 20.1.1.0 30 1.1.1.2    #  配置添加静态路由信息    目标网络，掩码，下一跳

display ip interface brief     #  查看接口与IP相关的配置和统计信息

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 3

The number of interface that is DOWN in Physical is 1

The number of interface that is UP in Protocol is 3

The number of interface that is DOWN in Protocol is 1

Interface                         IP Address/Mask      Physical   Protocol

GigabitEthernet0/0/0              10.1.1.1/24          up         up

GigabitEthernet0/0/1              1.1.1.1/24           up         up

GigabitEthernet0/0/2              unassigned           down       down

NULL0                             unassigned           up         up(s)

AR2配置命令:

system-view

[Huawei]interface GigabitEthernet 0/0/0

[Huawei-GigabitEthernet0/0/0]ip addr 1.1.1.2 24

[Huawei-GigabitEthernet0/0/0]quit

[Huawei]interface GigabitEthernet 0/0/1

[Huawei-GigabitEthernet0/0/1]ip addr 20.1.1.1 30

[Huawei-GigabitEthernet0/0/1]quit

[Huawei]ip route-static 10.1.1.0 30 1.1.1.1