我是linux上的全新新手,并且使用DVI连接电视机
http://www.cnet.com/products/samsung-ln-s325d/specs/。
问题:屏幕分辨率不好:(
我试过很多东西使用xrandr命令,但最终,新的模式是行不通的(黑屏)Linux Mint 17.2屏幕分辨率
这里。终端:
[email protected] ~ $ cvt 1366 768
# 1368x768 59.88 Hz (CVT) hsync: 47.79 kHz; pclk: 85.25 MHz
Modeline "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync
[email protected] ~ $ xrandr --newmode "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync
[email protected] ~ $ xrandr --addmode DVI-1 "1368x768_60.00"
从那里,
[email protected] ~ $ xrandr --output DVI-1 --mode 1368x768_60.00
或系统设置>显示> 1368x768(16:9)
只是给我一个黑色的屏幕说模式不可用
我已经尝试了很多其他的决议,但任何自定义的决议做到这一点。
任何人有想法? 谢谢! :)
编辑:
[email protected] ~ $ xrandr
Screen 0: minimum 320 x 200, current 1280 x 720, maximum 16384 x 16384
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-0 disconnected (normal left inverted right x axis y axis)
DVI-1 connected primary 1280x720+0+0 (normal left inverted right x axis y axis) 160mm x 90mm
1280x720 60.0*+ 59.9
1920x1080i 60.1 60.0
720x480 60.0 59.9
640x480 60.0 59.9
1368x768_60.00 59.9
1024x768_60.00 59.9
最后2加
2015-10-25
Frank R.