linux ps流程,Linux下PS命令详解 (转)

最新推荐文章于 2023-05-29 08:00:00 发布

shengqit

最新推荐文章于 2023-05-29 08:00:00 发布

阅读量589

点赞数

文章标签： linux ps流程

要对系统中进程进行监测控制，查看状态，内存，CPU的使用情况，使用命令：

/bin/ps

(1)ps ：是显示瞬间进程的状态，并不动态连续；

(2)top：如果想对进程运行时间监控，应该用 top 命令；

(3)kill 用于杀死进程或者给进程发送信号；

(4)查看文章最后的man手册，可以查看ps的每项输出的含义，to find: STANDARD FORMAT SPECIFIERS

===================================ps 的参数说明=============================

l 长格式输出；

u 按用户名和启动时间的顺序来显示进程；

j 用任务格式来显示进程；

f 用树形格式来显示进程；

a 显示所有用户的所有进程(包括其它用户)；

x 显示无控制终端的进程；

r 显示运行中的进程；

ww 避免详细参数被截断；

-A 列出所有的进程-w 显示加宽可以显示较多的资讯-au 显示较详细的资讯-aux 显示所有包含其他使用者的进程

-e 显示所有进程,环境变量-f 全格式-h 不显示标题-l 长格式-w 宽输出a 显示终端上地所有进程,包括其他用户地进程r 只显示正在运行地进程x 显示没有控制终端地进程

我们常用的选项是组合是aux 或lax，还有参数f 的应用。pids 只列出进程标识符,之间运用逗号分隔.该进程列表必须在命令行参数地最后一个选项后面紧接着给出,中间不能插入空格.比如：ps -f1,4,5 显示的是进程ID为1,4,5的进程

下介绍长命令行选项,这些选项都运用“--”开头：--sort X[+|-] key [,[+|-] key [,…]] 从SORT KEYS段中选一个多字母键.“+”字符是可选的,因为默认地方向就是按数字升序或者词典顺序，“-”字符是逆序排序(即降序).

比如：ps -jax -sort=uid,-ppid,+pid.--help 显示帮助信息.

--version 显示该命令地版本信息.

在前面地选项说明中提到了排序键,接下来对排序键作进一步说明.需要注意地是排序中运用地值是ps运用地内部值,并非仅用于某些输出格式地伪值.排序键列表见下表.

============排序键列表==========================

c cmd 可执行地简单名称C cmdline 完整命令行f flags 长模式标志g pgrp 进程地组ID

G tpgid 控制tty进程组ID

j cutime 累计用户时间J cstime 累计系统时间k utime 用户时间K stime 系统时间m min_flt 次要页错误地数量M maj_flt 重点页错误地数量n cmin_flt 累计次要页错误N cmaj_flt 累计重点页错误o session 对话ID

p pid 进程ID

P ppid 父进程ID

r rss 驻留大小R resident 驻留页s size 内存大小(千字节)

S share 共享页地数量t tty tty次要设备号T start_time 进程启动地时间U uid UID

u user 用户名v vsize 总地虚拟内存数量(字节)

y priority 内核调度优先级========================================ps aux 或lax 输出的解释=========================

2、ps aux 或lax 输出的解释

au(x) 输出格式:

USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND

USER: 进程所有者PID: 进程ID

%CPU: 占用的CPU 使用率%MEM: 占用的内存使用率VSZ: 占用的虚拟内存大小RSS: 占用的内存大小

TTY: 终端的次要装置号码(minor device number of tty)

STAT: 进程状态:

START: 启动进程的时间；TIME: 进程消耗CPU的时间；COMMAND:命令的名称和参数；

=========================================进程STAT状态==================================

D 无法中断的休眠状态(通常IO 的进程)；R 正在运行，在可中断队列中；S 处于休眠状态，静止状态；T 停止或被追踪，暂停执行；W 进入内存交换(从内核2.6开始无效)；X 死掉的进程；Z 僵尸进程不存在但暂时无法消除；

W: 没有足够的记忆体分页可分配WCHAN 正在等待的进程资源；

<: i pthreads>

========================================kill 终止进程================================

kill 终止进程

有十几种控制进程的方法，下面是一些常用的方法:

kill -STOP [pid]

发送SIGSTOP (17,19,23)停止一个进程，而并不消灭这个进程。

kill -CONT [pid]

发送SIGCONT (19,18,25)重新开始一个停止的进程。

kill -KILL [pid]

发送SIGKILL (9)强迫进程立即停止，并且不实施清理操作。

kill -9 -1

终止你拥有的全部进程。

SIGKILL 和SIGSTOP 信号不能被捕捉、封锁或者忽略，但是，其它的信号可以。所以这是你的终极武器。

==================================================范例==============================

$ ps

PID TTY TIME COMMAND

5800 ttyp0 00:00:00 bash

5835 ttyp0 00:00:00 ps

可以看到,显示地项目共分为四项,依次为PID(进程ID)、TTY(终端名称)、TIME(进程执行时间)、COMMAND(该进程地命令行输入).

可以运用u选项来查看进程所有者及其他少许详细信息,如下所示：$ ps u

USER PID %CPU %MEM USZ RSS TTY STAT START TIME COMMAND

test 5800 0.0 0.4 1892 1040 ttyp0 S Nov27 0:00 -bash

test 5836 0.0 0.3 2528 856 ttyp0 R Nov27 0:00 ps u

在bash进程前面有条横线,意味着该进程便是用户地登录shell,所以对于一个登录用户来说带短横线地进程只有一个.还可以看到%CPU、%MEM两个选项,前者指该进程占用地CPU时间

和总时间地百分比;后者指该进程占用地内存和总内存地百分比.

在这种情况下看到了所有控制终端地进程;当然对于其他那些没有控制终端地进程还是没有观察到,所以这时就需要运用x选项.运用x选项可以观察到所有地进程情况.

1)ps a 显示现行终端机下的所有程序，包括其他用户的程序。2)ps -A 显示所有程序。3)ps c 列出程序时，显示每个程序真正的指令名称，而不包含路径，参数或常驻服务的标示。4)ps -e 此参数的效果和指定"A"参数相同。5)ps e 列出程序时，显示每个程序所使用的环境变量。6)ps f 用ASCII字符显示树状结构，表达程序间的相互关系。7)ps -H 显示树状结构，表示程序间的相互关系。8)ps -N 显示所有的程序，除了执行ps指令终端机下的程序之外。9)ps s 采用程序信号的格式显示程序状况。10)ps S 列出程序时，包括已中断的子程序资料。11)ps -t 　指定终端机编号，并列出属于该终端机的程序的状况。12)ps u 　以用户为主的格式来显示程序状况。13)ps x 　显示所有程序，不以终端机来区分。

最常用的方法是ps -aux,然后再用管道符号导向到grep去查找特定的进程,然后再对特定的进程进行操作。

==================================================

luther@gliethttp:~$ ps --help********* simple selection ********* ********* selection by list *********

-A all processes -C by command name

-N negate selection -G by real group ID (supports names)

-a all w/ tty except session leaders -U by real user ID (supports names)

-d all except session leaders -g by session OR by effective group name

-e all processes -p by process ID

T all processes on this terminal -s processes in the sessions given

a all w/ tty, including other users -t by tty

g OBSOLETE -- DO NOT USE -u by effective user ID (supports names)

r only running processes U processes for specified users

x processes w/o controlling ttys t by tty

*********** output format ********** *********** long options ***********

-o,o user-defined -f full --Group --User --pid --cols --ppid

-j,j job control s signal --group --user --sid --rows --info

-O,O preloaded -o v virtual memory --cumulative --format --deselect

-l,l long u user-oriented --sort --tty --forest --version

-F extra full X registers --heading --no-heading --context

********* misc options *********

-V,V show version L list format codes f ASCII art forest

-m,m,-L,-T,H threads S children in sum -y change -l format

-M,Z security data c true command name -c scheduling class

-w,w wide output n numeric WCHAN,UID -H process hierarchy

luther@gliethttp:~$ man ps

EXAMPLES

To see every process on the system using standard syntax:

ps -e

ps -ef

ps -eF

ps -ely

To see every process on the system using BSD syntax:

ps ax

ps axu

To print a process tree:

ps -ejH

ps axjf

To get info about threads:

ps -eLf

ps axms

To get security info:

ps -eo euser,ruser,suser,fuser,f,comm,label

ps axZ

ps -eM

To see every process running as root (real & effective ID) in user

format:

ps -U root -u root u

To see every process with a user-defined format:

ps -eo pid,tid,class,rtprio,ni,pri,psr,pcpu,stat,wchan:14,comm

ps axo stat,euid,ruid,tty,tpgid,sess,pgrp,ppid,pid,pcpu,comm

ps -eopid,tt,user,fname,tmout,f,wchan

Print only the process IDs of syslogd:

ps -C syslogd -o pid=

Print only the name of PID 42:

ps -p 42 -o comm=

SIMPLE PROCESS SELECTION

-A Select all processes. Identical to -e.

-N Select all processes except those that fulfill the

specified conditions. (negates the selection) Identical

to --deselect.

T Select all processes associated with this terminal.

Identical to the t option without any argument.

-a Select all processes except both session leaders (see

getsid(2)) and processes not associated with a

terminal.

a Lift the BSD-style "only yourself" restriction, which

is imposed upon the set of all processes when some

BSD-style (without "-") options are used or when the ps

personality setting is BSD-like. The set of processes

selected in this manner is in addition to the set of

processes selected by other means. An alternate

description is that this option causes ps to list all

processes with a terminal (tty), or to list all

processes when used together with the x option.

-d Select all processes except session leaders.

-e Select all processes. Identical to -A.

g Really all, even session leaders. This flag is obsolete

and may be discontinued in a future release. It is

normally implied by the a flag, and is only useful when

operating in the sunos4 personality.

r Restrict the selection to only running processes.

x Lift the BSD-style "must have a tty" restriction, which

is imposed upon the set of all processes when some

BSD-style (without "-") options are used or when the ps

personality setting is BSD-like. The set of processes

selected in this manner is in addition to the set of

processes selected by other means. An alternate

description is that this option causes ps to list all

processes owned by you (same EUID as ps), or to list

all processes when used together with the a option.

PROCESS SELECTION BY LIST

These options accept a single argument in the form of a blank-separated

or comma-separated list. They can be used multiple times.

For example: ps -p "1 2" -p 3,4

-C cmdlist Select by command name.

This selects the processes whose executable name is

given in cmdlist.

-G grplist Select by real group ID (RGID) or name.

This selects the processes whose real group name or ID

is in the grplist list. The real group ID identifies

the group of the user who created the process, see

getgid(2).

U userlist Select by effective user ID (EUID) or name.

This selects the processes whose effective user name or

ID is in userlist. The effective user ID describes the

user whose file access permissions are used by the

process (see geteuid(2)). Identical to -u and --user.

-U userlist select by real user ID (RUID) or name.

It selects the processes whose real user name or ID is

in the userlist list. The real user ID identifies the

user who created the process, see getuid(2).

-g grplist Select by session OR by effective group name.

Selection by session is specified by many standards,

but selection by effective group is the logical

behavior that several other operating systems use. This

ps will select by session when the list is completely

numeric (as sessions are). Group ID numbers will work

only when some group names are also specified. See the

-s and --group options.

p pidlist Select by process ID. Identical to -p and --pid.

-p pidlist Select by PID.

This selects the processes whose process ID numbers

appear in pidlist. Identical to p and --pid.

-s sesslist Select by session ID.

This selects the processes with a session ID specified

in sesslist.

t ttylist Select by tty. Nearly identical to -t and --tty, but

can also be used with an empty ttylist to indicate the

terminal associated with ps. Using the T option is

considered cleaner than using T with an empty ttylist.

-t ttylist Select by tty.

This selects the processes associated with the

terminals given in ttylist. Terminals (ttys, or screens

for text output) can be specified in several forms:

/dev/ttyS1, ttyS1, S1. A plain "-" may be used to

select processes not attached to any terminal.

-u userlist Select by effective user ID (EUID) or name.

This selects the processes whose effective user name or

ID is in userlist. The effective user ID describes the

user whose file access permissions are used by the

process (see geteuid(2)). Identical to U and --user.

--Group grplist Select by real group ID (RGID) or name. Identical to

-G.

--User userlist Select by real user ID (RUID) or name. Identical to -U.

--group grplist Select by effective group ID (EGID) or name.

This selects the processes whose effective group name

or ID is in grouplist. The effective group ID describes

the group whose file access permissions are used by the

process (see geteuid(2)). The -g option is often an

alternative to --group.

--pid pidlist Select by process ID. Identical to -p and p.

--ppid pidlist Select by parent process ID. This selects the processes

with a parent process ID in pidlist. That is, it

selects processes that are children of those listed in

pidlist.

--sid sesslist Select by session ID. Identical to -s.

--tty ttylist Select by terminal. Identical to -t and t.

--user userlist Select by effective user ID (EUID) or name. Identical

to -u and U.

-123 Identical to --sid 123.

123 Identical to --pid 123.

OUTPUT FORMAT CONTROL

These options are used to choose the information displayed by ps. The

output may differ by personality.

-F extra full format. See the -f option, which -F implies.

-O format is like -o, but preloaded with some default columns.

Identical to -o pid,format,state,tname,time,command or

-o pid,format,tname,time,cmd, see -o below.

O format is preloaded o (overloaded).

The BSD O option can act like -O (user-defined output

format with some common fields predefined) or can be

used to specify sort order. Heuristics are used to

determine the behavior of this option. To ensure that

the desired behavior is obtained (sorting or

formatting), specify the option in some other way (e.g.

with -O or --sort). When used as a formatting option,

it is identical to -O, with the BSD personality.

-M Add a column of security data. Identical to Z.

(for SE Linux)

X Register format.

Z Add a column of security data. Identical to -M.

(for SE Linux)

-c Show different scheduler information for the -l option.

-f does full-format listing. This option can be combined

with many other UNIX-style options to add additional

columns. It also causes the command arguments to be

printed. When used with -L, the NLWP (number of

threads) and LWP (thread ID) columns will be added. See

the c option, the format keyword args, and the format

keyword comm.

j BSD job control format.

-j jobs format

l display BSD long format.

-l long format. The -y option is often useful with this.

o format specify user-defined format. Identical to -o and

--format.

-o format user-defined format.

format is a single argument in the form of a

blank-separated or comma-separated list, which offers a

way to specify individual output columns. The

recognized keywords are described in the STANDARD

FORMAT SPECIFIERS section below. Headers may be renamed

(ps -o pid,ruser=RealUser -o comm=Command) as desired.

If all column headers are empty (ps -o pid= -o comm=)

then the header line will not be output. Column width

will increase as needed for wide headers; this may be

used to widen up columns such as WCHAN

(ps -o pid,wchan=WIDE-WCHAN-COLUMN -o comm). Explicit

width control (ps opid,wchan:42,cmd) is offered too.

The behavior of ps -o pid=X,comm=Y varies with

personality; output may be one column named "X,comm=Y"

or two columns named "X" and "Y". Use multiple -o

options when in doubt. Use the PS_FORMAT environment

variable to specify a default as desired; DefSysV and

DefBSD are macros that may be used to choose the

default UNIX or BSD columns.

s display signal format

u display user-oriented format

v display virtual memory format

-y Do not show flags; show rss in place of addr. This

option can only be used with -l.

--format format user-defined format. Identical to -o and o.

--context Display security context format. (for SE Linux)

OUTPUT MODIFIERS

-H show process hierarchy (forest)

N namelist Specify namelist file. Identical to -n, see -n above.

O order Sorting order. (overloaded)

The BSD O option can act like -O (user-defined output

format with some common fields predefined) or can be

used to specify sort order. Heuristics are used to

determine the behavior of this option. To ensure that

the desired behavior is obtained (sorting or

formatting), specify the option in some other way (e.g.

with -O or --sort).

For sorting, obsolete BSD O option syntax is

O[+|-]k1[,[+|-]k2[,...]]. It orders the processes

listing according to the multilevel sort specified by

the sequence of one-letter short keys k1, k2, ...

described in the OBSOLETE SORT KEYS section below.

The "+" is currently optional, merely re-iterating the

default direction on a key, but may help to distinguish

an O sort from an O format. The "-" reverses direction

only on the key it precedes.

S Sum up some information, such as CPU usage, from dead

child processes into their parent. This is useful for

examining a system where a parent process repeatedly

forks off short-lived children to do work.

c Show the true command name. This is derived from the

name of the executable file, rather than from the argv

value. Command arguments and any modifications to them

are thus not shown. This option effectively turns the

args format keyword into the comm format keyword; it is

useful with the -f format option and with the various

BSD-style format options, which all normally display

the command arguments. See the -f option, the format

keyword args, and the format keyword comm.

e Show the environment after the command.

f ASCII-art process hierarchy (forest)

h No header. (or, one header per screen in the BSD

personality)

The h option is problematic. Standard BSD ps uses this

option to print a header on each page of output, but

older Linux ps uses this option to totally disable the

header. This version of ps follows the Linux usage of

not printing the header unless the BSD personality has

been selected, in which case it prints a header on each

page of output. Regardless of the current personality,

you can use the long options --headers and --no-headers

to enable printing headers each page or disable headers

entirely, respectively.

k spec specify sorting order. Sorting syntax is

[+|-]key[,[+|-]key[,...]] Choose a multi-letter key

from the STANDARD FORMAT SPECIFIERS section. The "+" is

optional since default direction is increasing

numerical or lexicographic order. Identical to --sort.

Examples:

ps jaxkuid,-ppid,+pid

ps axk comm o comm,args

ps kstart_time -ef

-n namelist set namelist file. Identical to N.

The namelist file is needed for a proper WCHAN display,

and must match the current Linux kernel exactly for

correct output. Without this option, the default search

path for the namelist is:

$PS_SYSMAP

$PS_SYSTEM_MAP

/proc/*/wchan

/boot/System.map-`uname -r`

/boot/System.map

/lib/modules/`uname -r`/System.map

/usr/src/linux/System.map

/System.map

n Numeric output for WCHAN and USER. (including all types

of UID and GID)

-w Wide output. Use this option twice for unlimited width.

w Wide output. Use this option twice for unlimited width.

--cols n set screen width

--columns n set screen width

--cumulative include some dead child process data (as a sum with the

parent)

--forest ASCII art process tree

--headers repeat header lines, one per page of output

--no-headers print no header line at all. --no-heading is an alias

for this option.

--lines n set screen height

--rows n set screen height

--sort spec specify sorting order. Sorting syntax is

[+|-]key[,[+|-]key[,...]] Choose a multi-letter key

from the STANDARD FORMAT SPECIFIERS section. The "+" is

optional since default direction is increasing

numerical or lexicographic order. Identical to k. For

example: ps jax --sort=uid,-ppid,+pid

--width n set screen width

THREAD DISPLAY

H Show threads as if they were processes

-L Show threads, possibly with LWP and NLWP columns

-T Show threads, possibly with SPID column

m Show threads after processes

-m Show threads after processes

OTHER INFORMATION

L List all format specifiers.

-V Print the procps version.

V Print the procps version.

--help Print a help message.

--info Print debugging info.

--version Print the procps version.

NOTES

This ps works by reading the virtual files in /proc. This ps does not

need to be setuid kmem or have any privileges to run. Do not give this

ps any special permissions.

This ps needs access to namelist data for proper WCHAN display. For

kernels prior to 2.6, the System.map file must be installed.

CPU usage is currently expressed as the percentage of time spent

running during the entire lifetime of a process. This is not ideal,

and it does not conform to the standards that ps otherwise conforms to.

CPU usage is unlikely to add up to exactly 100%.

The SIZE and RSS fields don't count some parts of a process including

the page tables, kernel stack, struct thread_info, and struct

task_struct. This is usually at least 20 KiB of memory that is always

resident. SIZE is the virtual size of the process (code+data+stack).

Processes marked are dead processes (so-called "zombies")

that remain because their parent has not destroyed them properly. These

processes will be destroyed by init(8) if the parent process exits.

PROCESS FLAGS

The sum of these values is displayed in the "F" column, which is

provided by the flags output specifier.

1 forked but didn't exec

4 used super-user privileges

PROCESS STATE CODES

Here are the different values that the s, stat and state output

specifiers (header "STAT" or "S") will display to describe the state of

a process.

D Uninterruptible sleep (usually IO)

R Running or runnable (on run queue)

S Interruptible sleep (waiting for an event to complete)

T Stopped, either by a job control signal or because it is being

traced.

W paging (not valid since the 2.6.xx kernel)

X dead (should never be seen)

Z Defunct ("zombie") process, terminated but not reaped by its

parent.

For BSD formats and when the stat keyword is used, additional

characters may be displayed:

N low-priority (nice to other users)

L has pages locked into memory (for real-time and custom IO)

s is a session leader

l is multi-threaded (using CLONE_THREAD, like NPTL pthreads do)

+ is in the foreground process group

OBSOLETE SORT KEYS

These keys are used by the BSD O option (when it is used for sorting).

The GNU --sort option doesn't use these keys, but the specifiers

described below in the STANDARD FORMAT SPECIFIERS section. Note that

the values used in sorting are the internal values ps uses and not the

"cooked" values used in some of the output format fields (e.g. sorting

on tty will sort into device number, not according to the terminal name

displayed). Pipe ps output into the sort(1) command if you want to sort

the cooked values.

KEY LONG DESCRIPTION

c cmd simple name of executable

C pcpu cpu utilization

f flags flags as in long format F field

g pgrp process group ID

G tpgid controlling tty process group ID

j cutime cumulative user time

J cstime cumulative system time

k utime user time

m min_flt number of minor page faults

M maj_flt number of major page faults

n cmin_flt cumulative minor page faults

N cmaj_flt cumulative major page faults

o session session ID

p pid process ID

P ppid parent process ID

r rss resident set size

R resident resident pages

s size memory size in kilobytes

S share amount of shared pages

t tty the device number of the controlling tty

T start_time time process was started

U uid user ID number

u user user name

v vsize total VM size in kB

y priority kernel scheduling priority

AIX FORMAT DESCRIPTORS

This ps supports AIX format descriptors, which work somewhat like the

formatting codes of printf(1) and printf(3). For example, the normal

default output can be produced with this: ps -eo "%p %y %x %c".

The NORMAL codes are described in the next section.

CODE NORMAL HEADER

%C pcpu %CPU

%G group GROUP

%P ppid PPID

%U user USER

%a args COMMAND

%c comm COMMAND

%g rgroup RGROUP

%n nice NI

%p pid PID

%r pgid PGID

%t etime ELAPSED

%u ruser RUSER

%x time TIME

%y tty TTY

%z vsz VSZ

STANDARD FORMAT SPECIFIERS

Here are the different keywords that may be used to control the output

format (e.g. with option -o) or

to sort the selected processes with the GNU-style --sortoption.

For example: ps -eo pid,user,args --sort user

This version of ps tries to recognize most of the keywords used in

other implementations of ps.

The following user-defined format specifiers may contain spaces: args,

cmd, comm, command, fname, ucmd, ucomm, lstart, bsdstart, start.

Some keywords may not be available for sorting.

CODE HEADER DESCRIPTION

%cpu %CPU cpu utilization of the process in "##.#" format.

Currently, it is the CPU time used divided by the time the

process has been running (cputime/realtime ratio),

expressed as a percentage. It will not add up to 100%

unless you are lucky. (alias pcpu).

%mem %MEM ratio of the process's resident set size to the physical

memory on the machine, expressed as a percentage.

(alias pmem).

args COMMANDcommand with all its arguments as a string. Modifications

to the arguments may be shown. The output in this column

may contain spaces. A process marked is partly

dead, waiting to be fully destroyed by its parent.

Sometimes the process args will be unavailable; when this

happens, ps will instead print the executable name in

brackets. (alias cmd, command). See also the comm format

keyword, the -f option, and the c option.

When specified last, this column will extend to the edge

of the display. If ps can not determine display width, as

when output is redirected (piped) into a file or another

command, the output width is undefined. (it may be 80,

unlimited, determined by the TERM variable, and so on) The

COLUMNS environment variable or --cols option may be used

to exactly determine the width in this case. The w or -w

option may be also be used to adjust width.

blocked BLOCKEDmask of the blocked signals, see signal(7). According to

the width of the field, a 32-bit or 64-bit mask in

hexadecimal format is displayed.

(alias sig_block, sigmask).

bsdstart START time the command started. If the process was started less

than 24 hours ago, the output format is " HH:MM", else it

is "mmm dd" (where mmm is the three letters of the month).

See also lstart, start, start_time, and stime.

bsdtime TIME accumulated cpu time, user + system. The display format is

usually "MMM:SS", but can be shifted to the right if the

process used more than 999 minutes of cpu time.

c C processor utilization. Currently, this is the integer

value of the percent usage over the lifetime of the

process. (see %cpu).

caught CAUGHT mask of the caught signals, see signal(7). According to

the width of the field, a 32 or 64 bits mask in

hexadecimal format is displayed.

(alias sig_catch, sigcatch).

class CLS scheduling class of the process. (alias policy, cls).

Field's possible values are:

- not reported

TS SCHED_OTHER

FF SCHED_FIFO

RR SCHED_RR

B SCHED_BATCH

ISO SCHED_ISO

IDL SCHED_IDLE

? unknown value

cls CLS scheduling class of the process. (alias policy, class).

Field's possible values are:

- not reported

TS SCHED_OTHER

FF SCHED_FIFO

RR SCHED_RR

B SCHED_BATCH

ISO SCHED_ISO

IDL SCHED_IDLE

? unknown value

cmd CMD see args. (alias args, command).

comm COMMANDcommand name (only the executable name). Modifications to

the command name will not be shown. A process marked

is partly dead, waiting to be fully destroyed by

its parent. The output in this column may contain spaces.

(alias ucmd, ucomm). See also the args format keyword, the

-f option, and the c option.

When specified last, this column will extend to the edge

of the display. If ps can not determine display width, as

when output is redirected (piped) into a file or another

command, the output width is undefined. (it may be 80,

unlimited, determined by the TERM variable, and so on) The

COLUMNS environment variable or --cols option may be used

to exactly determine the width in this case. The w or -w

option may be also be used to adjust width.

command COMMANDsee args. (alias args, cmd).

cp CP per-mill (tenths of a percent) CPU usage. (see %cpu).

cputime TIME cumulative CPU time, "[dd-]hh:mm:ss" format. (alias time).

egid EGID effective group ID number of the process as a decimal

integer. (alias gid).

egroup EGROUP effective group ID of the process. This will be the

textual group ID, if it can be obtained and the field

width permits, or a decimal representation otherwise.

(alias group).

eip EIP instruction pointer.

esp ESP stack pointer.

etime ELAPSEDelapsed time since the process was started, in the

form [[dd-]hh:]mm:ss.

euid EUID effective user ID. (alias uid).

euser EUSER effective user name. This will be the textual user ID,

if it can be obtained and the field width permits,

or a decimal representation otherwise. The n option can be

used to force the decimal representation.

(alias uname, user).

f F flags associated with the process, see the PROCESS FLAGS

section. (alias flag, flags).

fgid FGID filesystem access group ID. (alias fsgid).

fgroup FGROUP filesystem access group ID. This will be the textual

user ID, if it can be obtained and the field width

permits, or a decimal representation otherwise.

(alias fsgroup).

flag F see f. (alias f, flags).

flags F see f. (alias f, flag).

fname COMMANDfirst 8 bytes of the base name of the process's executable

file. The output in this column may contain spaces.

fuid FUID filesystem access user ID. (alias fsuid).

fuser FUSER filesystem access user ID. This will be the textual

user ID, if it can be obtained and the field width

permits, or a decimal representation otherwise.

gid GID see egid. (alias egid).

group GROUP see egroup. (alias egroup).

ignored IGNOREDmask of the ignored signals, see signal(7). According to

the width of the field, a 32-bit or 64-bit mask in

hexadecimal format is displayed. (alias sig_ignore,

sigignore).

label LABEL security label, most commonly used for SE Linux context

data. This is for the Mandatory Access Control ("MAC")

found on high-security systems.

lstart STARTEDtime the command started. See also bsdstart, start,

start_time, and stime.

lwp LWP lwp (light weight process, or thread) ID of the lwp being

reported. (alias spid, tid).

ni NI nice value. This ranges from 19 (nicest) to -20 (not nice

to others), see nice(1). (alias nice).

nice NI see ni. (alias ni).

nlwp NLWP number of lwps (threads) in the process. (alias thcount).

nwchan WCHAN address of the kernel function where the process is

sleeping (use wchan if you want the kernel function name).

Running tasks will display a dash ('-') in this column.

pcpu %CPU see %cpu. (alias %cpu).

pending PENDINGmask of the pending signals. See signal(7). Signals

pending on the process are distinct from signals pending

on individual threads. Use the m option or the -m option

to see both. According to the width of the field, a 32-bit

or 64-bit mask in hexadecimal format is displayed.

(alias sig).

pgid PGID process group ID or, equivalently, the process ID of the

process group leader. (alias pgrp).

pgrp PGRP see pgid. (alias pgid).

pid PID process ID number of the process.

pmem %MEM see %mem. (alias %mem).

policy POL scheduling class of the process. (alias class, cls).

Possible values are:

- not reported

TS SCHED_OTHER

FF SCHED_FIFO

RR SCHED_RR

B SCHED_BATCH

ISO SCHED_ISO

IDL SCHED_IDLE

? unknown value

ppid PPID parent process ID.

pri PRI priority of the process. Higher number means lower

priority

psr PSR processor that process is currently assigned to.

rgid RGID real group ID.

rgroup RGROUP real group name. This will be the textual group ID, if it

can be obtained and the field width permits, or a decimal

representation otherwise.

rss RSS resident set size, the non-swapped physical memory that a

task has used (in kiloBytes). (alias rssize, rsz).

rssize RSS see rss. (alias rss, rsz).

rsz RSZ see rss. (alias rss, rssize).

rtprio RTPRIO realtime priority.

ruid RUID real user ID.

ruser RUSER real user ID. This will be the textual user ID, if it can

be obtained and the field width permits, or a decimal

representation otherwise.

s S minimal state display (one character). See section PROCESS

STATE CODES for the different values. See also stat if you

want additional information displayed. (alias state).

sched SCH scheduling policy of the process. The policies SCHED_OTHER

(SCHED_NORMAL), SCHED_FIFO, SCHED_RR, SCHED_BATCH,

SCHED_ISO, and SCHED_IDLE are respectively displayed as

0, 1, 2, 3, 4, and 5.

sess SESS session ID or, equivalently, the process ID of the

session leader. (alias session, sid).

sgi_p P processor that the process is currently executing on.

Displays "*" if the process is not currently running or

runnable.

sgid SGID saved group ID. (alias svgid).

sgroup SGROUP saved group name. This will be the textual group ID, if it

can be obtained and the field width permits, or a decimal

representation otherwise.

sid SID see sess. (alias sess, session).

sig PENDINGsee pending. (alias pending, sig_pend).

sigcatch CAUGHT see caught. (alias caught, sig_catch).

sigignore IGNOREDsee ignored. (alias ignored, sig_ignore).

sigmask BLOCKEDsee blocked. (alias blocked, sig_block).

size SZ approximate amount of swap space that would be required if

the process were to dirty all writable pages and then be

swapped out. This number is very rough!

spid SPID see lwp. (alias lwp, tid).

stackp STACKP address of the bottom (start) of stack for the process.

start STARTEDtime the command started. If the process was started less

than 24 hours ago, the output format is "HH:MM:SS", else

it is " mmm dd" (where mmm is a three-letter month name).

See also lstart, bsdstart, start_time, and stime.

start_timeSTART starting time or date of the process. Only the year will

be displayed if the process was not started the same year

ps was invoked, or "mmmdd" if it was not started the same

day, or "HH:MM" otherwise. See also bsdstart, start,

lstart, and stime.

stat STAT multi-character process state. See section PROCESS STATE

CODES for the different values meaning. See also s and

state if you just want the first character displayed.

state S see s. (alias s).

suid SUID saved user ID. (alias svuid).

suser SUSER saved user name. This will be the textual user ID, if it

can be obtained and the field width permits, or a decimal

representation otherwise. (alias svuser).

svgid SVGID see sgid. (alias sgid).

svuid SVUID see suid. (alias suid).

sz SZ size in physical pages of the core image of the process.

This includes text, data, and stack space. Device mappings

are currently excluded; this is subject to change. See vsz

and rss.

thcount THCNT see nlwp. (alias nlwp). number of kernel threads owned by

the process.

tid TID see lwp. (alias lwp).

time TIME cumulative CPU time, "[dd-]hh:mm:ss" format.

(alias cputime).

tname TTY controlling tty (terminal). (alias tt, tty).

tpgid TPGID ID of the foreground process group on the tty (terminal)

that the process is connected to, or -1 if the process is

not connected to a tty.

tt TT controlling tty (terminal). (alias tname, tty).

tty TT controlling tty (terminal). (alias tname, tt).

ucmd CMD see comm. (alias comm, ucomm).

ucomm COMMANDsee comm. (alias comm, ucmd).

uid UID see euid. (alias euid).

uname USER see euser. (alias euser, user).

user USER see euser. (alias euser, uname).

vsize VSZ see vsz. (alias vsz).

vsz VSZ virtual memory size of the process in KiB

(1024-byte units). Device mappings are currently excluded;

this is subject to change. (alias vsize).

wchan WCHAN name of the kernel function in which the process is

sleeping, a "-" if the process is running, or a "*" if the

process is multi-threaded and ps is not displaying

threads.

ENVIRONMENT VARIABLES

The following environment variables could affect ps:

COLUMNS

Override default display width.

LINES

Override default display height.

PS_PERSONALITY

Set to one of posix, old, linux, bsd, sun, digital...

(see section PERSONALITY below).

CMD_ENV

Set to one of posix, old, linux, bsd, sun, digital...

(see section PERSONALITY below).

I_WANT_A_BROKEN_PS

Force obsolete command line interpretation.

LC_TIME

Date format.

PS_COLORS

Not currently supported.

PS_FORMAT

Default output format override. You may set this to a format string

of the type used for the -o option. The DefSysV and DefBSD values

are particularly useful.

PS_SYSMAP

Default namelist (System.map) location.

PS_SYSTEM_MAP

Default namelist (System.map) location.

POSIXLY_CORRECT

Don't find excuses to ignore bad "features".

POSIX2

When set to "on", acts as POSIXLY_CORRECT.

UNIX95

Don't find excuses to ignore bad "features".

_XPG

Cancel CMD_ENV=irix non-standard behavior.

In general, it is a bad idea to set these variables. The one exception

is CMD_ENV or PS_PERSONALITY, which could be set to Linux for normal

systems. Without that setting, ps follows the useless and bad parts of

the Unix98 standard.

PERSONALITY

390 like the S/390 OpenEdition ps

aix like AIX ps

bsd like FreeBSD ps (totally non-standard)

compaq like Digital Unix ps

debian like the old Debian ps

digital like Tru64 (was Digital Unix, was OSF/1) ps

gnu like the old Debian ps

hp like HP-UX ps

hpux like HP-UX ps

irix like Irix ps

linux ***** RECOMMENDED *****

old like the original Linux ps (totally non-standard)

os390 like OS/390 Open Edition ps

posix standard

s390 like OS/390 Open Edition ps

sco like SCO ps

sgi like Irix ps

solaris2 like Solaris 2+ (SunOS 5) ps

sunos4 like SunOS 4 (Solaris 1) ps (totally non-standard)

svr4 standard

sysv standard

tru64 like Tru64 (was Digital Unix, was OSF/1) ps

unix standard

unix95 standard

unix98 standard

linux ps流程,Linux下PS命令详解 (转)

“相关推荐”对你有帮助么？