java程序弹出a_Eclipse无法正常启动，弹出对话框内容为 A Java Runtime...

最新推荐文章于 2022-01-26 23:51:53 发布
最新推荐文章于 2022-01-26 23:51:53 发布
阅读量344 收藏
点赞数
文章标签： java程序弹出a
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/weixin_29887021/article/details/114917902
版权

1、Eclipse无法正常启动，弹出对话框内容为 A Java Runtime...如下图：

7c4fcf9df06f55395f073545aa2dae86.png

原因分析：由于软件版本的更新或者安装其他开发软件无意之间修改了配置文件中的路径，众所周知，Java虚拟机(Java Virtual Machine 简称JVM)是运行所有Java程序的抽象计算机，是Java语言的运行环境，它是Java 最具吸引力的特性之一，而恰恰我们的路径错误就是Eclipse找不到虚拟机，所以导致无法正常启动。

2.解决办法

(1).在eclipse的桌面快捷方式上右击-->打开文件位置-->找到eclipse.ini文件-->用记事本打开，然后去找系统自带的Java虚拟机，如下图

3fa14a5400062255d32f2b4a115747bc.png

(2)记事本打开后，如下图

c21c47a5b4b57ef63c737f4466c43b9e.png

(3).继续找Java的虚拟机，不要关闭eclipse.ini文件，系统自带的Java虚拟机一般在计算机/C盘/Java/，然后根据这个路径继续点击打开bin目录，如下图路径

e571dac922a7a2b393a6b66a700a7beb.png

(4)将此路径复制，然后在eclipse.ini文件中填写，如下图，注意：-vm 下面的路径盘符前面不要加任何符号

81071eb379e176c3d13d0e1ac99b3a82.png

(5)最后，保存并关闭所有文件夹，重新打开Eclipse问题即可解决

Purkialo
关注
  • 0
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
Java邮件开发Fundamentals of the JavaMail API
01-15
Fundamentals of the JavaMail API Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Table of Contents If you're viewing this document online, you can click any of the topics below to link directly to that section. 1. Tutorial tips 2 2. Introducing the JavaMail API 3 3. Reviewing related protocols 4 4. Installing JavaMail 6 5. Reviewing the core classes 8 6. Using the JavaMail API 13 7. Searching with SearchTerm 21 8. Exercises 22 9. Wrapup 32 Fundamentals of the JavaMail API Page 1 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Section 1. Tutorial tips Should I take this tutorial? Looking to incorporate mail facilities into your platform-independent Java solutions? Look no further than the JavaMail API, which offers a protocol-independent model for working with IMAP, POP, SMTP, MIME, and all those other Internet-related messaging protocols. With the help of the JavaBeans Activation Framework (JAF), your applications can now be mail-enabled through the JavaMail API. Concepts After completing this module you will understand the: * Basics of the Internet mail protocols SMTP, POP3, IMAP, and MIME * Architecture of the JavaMail framework * Connections between the JavaMail API and the JavaBeans Activation Framework Objectives By the end of this module you will be able to: * Send and read mail using the JavaMail API * Deal with sending and receiving attachments * Work with HTML messages * Use search terms to search for messages Prerequisites Instructions on how to download and install the JavaMail API are contained in the course. In addition, you will need a development environment such as the JDK 1.1.6+ or the Java 2 Platform, Standard Edition (J2SE) 1.2.x or 1.3.x. A general familiarity with object-oriented programming concepts and the Java programming language is necessary. The Java language essentials tutorial can help. copyright 1996-2000 Magelang Institute dba jGuru Contact jGuru has been dedicated to promoting the growth of the Java technology community through evangelism, education, and software since 1995. You can find out more about their activities, including their huge collection of FAQs at jGuru.com . To send feedback to jGuru about this course, send mail to [email protected] . Course author: Formerly with jGuru.com , John Zukowski does strategic Java consulting for JZ Ventures, Inc. His latest book is titled Java Collections from Apress . Fundamentals of the JavaMail API Page 2 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Section 2. Introducing the JavaMail API What is the JavaMail API? The JavaMail API is an optional package (standard extension) for reading, composing, and sending electronic messages. You use the package to create Mail User Agent (MUA) type programs, similar to Eudora, pine, and Microsoft Outlook. The API's main purpose is not for transporting, delivering, and forwarding messages; this is the purview of applications such as sendmail and other Mail Transfer Agent (MTA) type programs. MUA-type programs let users read and write e-mail, whereas MUAs rely on MTAs to handle the actual delivery. The JavaMail API is designed to provide protocol-independent access for sending and receiving messages by dividing the API into two parts: * The first part of the API is the focus of this course --basically, how to send and receive messages independent of the provider/protocol. * The second part speaks the protocol-specific languages, like SMTP, POP, IMAP, and NNTP. With the JavaMail API, in order to communicate with a server, you need a provider for a protocol. The creation of protocol-specific providers is not covered in this course because Sun provides a sufficient set for free. Fundamentals of the JavaMail API Page 3 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Section 3. Reviewing related protocols Introduction Before looking into the JavaMail API specifics, let's step back and take a look at the protocols used with the API. There are basically four that you'll come to know and love: * SMTP * POP * IMAP * MIME You will also run across NNTP and some others. Understanding the basics of all the protocols will help you understand how to use the JavaMail API. While the API is designed to be protocol agnostic, you can't overcome the limitations of the underlying protocols. If a capability isn't supported by a chosen protocol, the JavaMail API doesn't magically add the capability on top of it. (As you'll soon see, this can be a problem when working with POP.) SMTP The Simple Mail Transfer Protocol (SMTP) is defined by RFC 821 . It defines the mechanism for delivery of e-mail. In the context of the JavaMail API, your JavaMail-based program will communicate with your company or Internet Service Provider's (ISP's) SMTP server. That SMTP server will relay the message on to the SMTP server of the recipient(s) to eventually be acquired by the user(s) through POP or IMAP. This does not require your SMTP server to be an open relay, as authentication is supported, but it is your responsibility to ensure the SMTP server is configured properly. There is nothing in the JavaMail API for tasks like configuring a server to relay messages or to add and remove e-mail accounts. POP POP stands for Post Office Protocol. Currently in version 3, also known as POP3, RFC 1939 defines this protocol. POP is the mechanism most people on the Internet use to get their mail. It defines support for a single mailbox for each user. That is all it does, and that is also the source of a lot of confusion. Much of what people are familiar with when using POP, like the ability to see how many new mail messages they have, are not supported by POP at all. These capabilities are built into programs like Eudora or Microsoft Outlook, which remember things like the last mail received and calculate how many are new for you. So, when using the JavaMail API, if you want this type of information, you have to calculate it yourself. IMAP IMAP is a more advanced protocol for receiving messages. Defined in RFC 2060 , IMAP stands for Internet Message Access Protocol, and is currently in version 4, also known as IMAP4. When using IMAP, your mail server must support the protocol. You can't just change your program to use IMAP instead of POP and expect everything in IMAP to be supported. Assuming your mail server supports IMAP, your JavaMail-based program can take Fundamentals of the JavaMail API Page 4 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks advantage of users having multiple folders on the server and these folders can be shared by multiple users. Due to the more advanced capabilities, you might think IMAP would be used by everyone. It isn't. It places a much heavier burden on the mail server, requiring the server to receive the new messages, deliver them to users when requested, and maintain them in multiple folders for each user. While this does centralize backups, as users' long-term mail folders get larger and larger, everyone suffers when disk space is exhausted. With POP, saved messages get offloaded from the mail server. MIME MIME stands for Multipurpose Internet Mail Extensions. It is not a mail transfer protocol. Instead, it defines the content of what is transferred: the format of the messages, attachments, and so on. There are many different documents that take effect here: RFC 822 , RFC 2045 , RFC 2046 , and RFC 2047 . As a user of the JavaMail API, you usually don't need to worry about these formats. However, these formats do exist and are used by your programs. NNTP and others Because of the split of the JavaMail API between provider and everything else, you can easily add support for additional protocols. Sun maintains a list of third-party providers that take advantage of protocols for which Sun does not provide out-of-the-box support. You'll find support for NNTP (Network News Transport Protocol) [newsgroups], S/MIME (Secure Multipurpose Internet Mail Extensions), and more. Fundamentals of the JavaMail API Page 5 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Section 4. Installing JavaMail Introduction There are two versions of the JavaMail API commonly used today: 1.2 and 1.1.3. All the examples in this course will work with both. While 1.2 is the latest, 1.1.3 is the version included with the 1.2.1 version of the Java 2 Platform, Enterprise Edition (J2EE), so it is still commonly used. The version of the JavaMail API you want to use affects what you download and install. All will work with JDK 1.1.6+, Java 2 Platform, Standard Edition (J2SE) version 1.2.x, and J2SE version 1.3.x. Note: After installing Sun's JavaMail implementation, you can find many example programs in the demo directory. Installing JavaMail 1.2 To use the JavaMail 1.2 API, download the JavaMail 1.2 implementation, unbundle the javamail-1_2.zip file, and add the mail.jar file to your CLASSPATH. The 1.2 implementation comes with an SMTP, IMAP4, and POP3 provider besides the core classes. After installing JavaMail 1.2, install the JavaBeans Activation Framework. Installing JavaMail 1.1.3 To use the JavaMail 1.1.3 API, download the JavaMail 1.1.3 implementation, unbundle the javamail1_1_3.zip file, and add the mail.jar file to your CLASSPATH. The 1.1.3 implementation comes with an SMTP and IMAP4 provider, besides the core classes. If you want to access a POP server with JavaMail 1.1.3, download and install a POP3 provider. Sun has one available separate from the JavaMail implementation. After downloading and unbundling pop31_1_1.zip, add pop3.jar to your CLASSPATH, too. After installing JavaMail 1.1.3, install the JavaBeans Activation Framework. Installing the JavaBeans Activation Framework All versions of the JavaMail API require the JavaBeans Activation Framework. The framework adds support for typing arbitrary blocks of data and handling it accordingly. This doesn't sound like much, but it is your basic MIME-type support found in many browsers and mail tools today. After downloading the framework, unbundle the jaf1_0_1.zip file, and add the activation.jar file to your CLASSPATH. For JavaMail 1.2 users, you should now have added mail.jar and activation.jar to your CLASSPATH. For JavaMail 1.1.3 users, you should now have added mail.jar, pop3.jar, and activation.jar to your CLASSPATH. If you have no plans of using POP3, you don't Fundamentals of the JavaMail API Page 6 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks need to add pop3.jar to your CLASSPATH. If you don't want to change the CLASSPATH environment variable, copy the jar files to your lib/ext directory under the Java Runtime Environment (JRE) directory. For instance, for the J2SE 1.3 release, the default directory would be C:\jdk1.3\jre\lib\ext on a Windows platform. Using JavaMail with the Java 2 Enterprise Edition If you use J2EE, there is nothing special you have to do to use the basic JavaMail API; it comes with the J2EE classes. Just make sure the j2ee.jar file is in your CLASSPATH and you're all set. For J2EE 1.2.1, the POP3 provider comes separately, so download and follow the steps to include the POP3 provider as shown in the previous section &quot;Installing JavaMail 1.1.3.&quot; J2EE 1.3 users get the POP3 provider with J2EE so do not require the separate installation. Neither installation requires you to install the JavaBeans Activation Framework. Exercise Exercise 1. How to set up a JavaMail environment on page 22 Fundamentals of the JavaMail API Page 7 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Section 5. Reviewing the core classes Introduction Before taking a how-to approach at looking at the JavaMail classes in depth, this section walks you through the core classes that make up the API: Session, Message, Address, Authenticator, Transport, Store, and Folder. All these classes are found in the top-level package for the JavaMail API, javax.mail, though you'll frequently find yourself using subclasses found in the javax.mail.internet package. Session The Session class defines a basic mail session. It is through this session that everything else works. The Session object takes advantage of a java.util.Properties object to get information like mail server, username, password, and other information that can be shared across your entire application. The constructors for the class are private. You can get a single default session that can be shared with the getDefaultInstance() method: Properties props = new Properties(); // fill props with any information Session session = Session.getDefaultInstance(props, null); Or, you can create a unique session with getInstance(): Properties props = new Properties(); // fill props with any information Session session = Session.getDefaultInstance(props, null); In both cases, the null argument is an Authenticator object that is not being used at this time. In most cases, it is sufficient to use the shared session, even if working with mail sessions for multiple user mailboxes. You can add the username and password combination in at a later step in the communication process, keeping everything separate. Message Once you have your Session object, it is time to move on to creating the message to send. This is done with a type of Message . Because Message is an abstract class, you must work with a subclass, in most cases javax.mail.internet.MimeMessage .A MimeMessage is an e-mail message that understands MIME types and headers, as defined in the different RFCs. Message headers are restricted to US-ASCII characters only, though non-ASCII characters can be encoded in certain header fields. To create a Message, pass along the Session object to the MimeMessage constructor: MimeMessage message = new MimeMessage(session); Fundamentals of the JavaMail API Page 8 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Note: There are other constructors, like for creating messages from RFC822-formatted input streams. Once you have your message, you can set its parts, as Message implements the Part interface (with MimeMessage implementing MimePart ). The basic mechanism to set the content is the setContent() method, with arguments for the content and the mime type: message.setContent(&quot;Hello&quot;, &quot;text/plain&quot;); If, however, you know you are working with a MimeMessage and your message is plain text, you can use its setText() method, which only requires the actual content, defaulting to the MIME type of text/plain: message.setText(&quot;Hello&quot;); For plain text messages, the latter form is the preferred mechanism to set the content. For sending other kinds of messages, like HTML messages, use the former. For setting the subject, use the setSubject() method: message.setSubject(&quot;First&quot;); Address Once you've created the Session and the Message, as well as filled the message with content, it is time to address your letter with an Address . Like Message, Address is an abstract class. You use the javax.mail.internet.InternetAddress class. To create an address with just the e-mail address, pass the e-mail address to the constructor: Address address = new InternetAddress(&quot;[email protected]&quot;); If you want a name to appear next to the e-mail address, you can pass that along to the constructor, too: Address address = new InternetAddress(&quot;[email protected]&quot;, &quot;George Bush&quot;); You will need to create address objects for the message's from field as well as the to field. Unless your mail server prevents you, there is nothing stopping you from sending a message that appears to be from anyone. Once you've created the addresses, you connect them to a message in one of two ways. For identifying the sender, you use the setFrom() and setReplyTo() methods. message.setFrom(address) If your message needs to show multiple from addresses, use the addFrom() method: Fundamentals of the JavaMail API Page 9 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Address address[] = ...; message.addFrom(address); For identifying the message recipients, you use the addRecipient() method. This method requires a Message.RecipientType besides the address. message.addRecipient(type, address) The three predefined types of address are: * Message.RecipientType.TO * Message.RecipientType.CC * Message.RecipientType.BCC So, if the message was to go to the vice president, sending a carbon copy to the first lady, the following would be appropriate: Address toAddress = new InternetAddress(&quot;[email protected]&quot;); Address ccAddress = new InternetAddress(&quot;[email protected]&quot;); message.addRecipient(Message.RecipientType.TO, toAddress); message.addRecipient(Message.RecipientType.CC, ccAddress); The JavaMail API provides no mechanism to check for the validity of an e-mail address. While you can program in support to scan for valid characters (as defined by RFC 822) or verify the MX (mail exchange) record yourself, these are all beyond the scope of the JavaMail API. Authenticator Like the java.net classes, the JavaMail API can take advantage of an Authenticator to access protected resources via a username and password. For the JavaMail API, that resource is the mail server. The JavaMail Authenticator is found in the javax.mail package and is different from the java.net class of the same name. The two don't share the same Authenticator as the JavaMail API works with Java 1.1, which didn't have the java.net variety. To use the Authenticator, you subclass the abstract class and return a PasswordAuthentication instance from the getPasswordAuthentication() method. You must register the Authenticator with the session when created. Then, your Authenticator will be notified when authentication is necessary. You could pop up a window or read the username and password from a configuration file (though if not encrypted is not secure), returning them to the caller as a PasswordAuthentication object. Properties props = new Properties(); // fill props with any information Authenticator auth = new MyAuthenticator(); Session session = Session.getDefaultInstance(props, auth); Transport The final part of sending a message is to use the Transport class. This class speaks the Fundamentals of the JavaMail API Page 10 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks protocol-specific language for sending the message (usually SMTP). It's an abstract class and works something like Session. You can use the default version of the class by just calling the static send() method: Transport.send(message); Or, you can get a specific instance from the session for your protocol, pass along the username and password (blank if unnecessary), send the message, and close the connection: message.saveChanges(); // implicit with send() Transport transport = session.getTransport(&quot;smtp&quot;); transport.connect(host, username, password); transport.sendMessage(message, message.getAllRecipients()); transport.close(); This latter way is best when you need to send multiple messages, as it will keep the connection with the mail server active between messages. The basic send() mechanism makes a separate connection to the server for each method call. Note: To watch the mail commands go by to the mail server, set the debug flag with session.setDebug(true). Store and folder Getting messages starts similarly to sending messages with a Session. However, after getting the session, you connect to a Store , quite possibly with a username and password or Authenticator. Like Transport, you tell the Store what protocol to use: // Store store = session.getStore(&quot;imap&quot;); Store store = session.getStore(&quot;pop3&quot;); store.connect(host, username, password); After connecting to the Store, you can then get a Folder , which must be opened before you can read messages from it: Folder folder = store.getFolder(&quot;INBOX&quot;); folder.open(Folder.READ_ONLY); Message message[] = folder.getMessages(); For POP3, the only folder available is the INBOX. If you are using IMAP, you can have other folders available. Note: Sun's providers are meant to be smart. While Message message[] = folder.getMessages(); might look like a slow operation reading every message from the server, only when you actually need to get a part of the message is the message content retrieved. Once you have a Message to read, you can get its content with getContent() or write its content to a stream with writeTo(). The getContent() method only gets the message content, while writeTo() output includes headers. Fundamentals of the JavaMail API Page 11 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks System.out.println(((MimeMessage)message).getContent()); Once you're done reading mail, close the connection to the folder and store. folder.close(aBoolean); store.close(); The boolean passed to the close() method of folder states whether or not to update the folder by removing deleted messages. Moving on Essentially, understanding how to use these seven classes is all you need for nearly everything with the JavaMail API. Most of the other capabilities of the JavaMail API build off these seven classes to do something a little different or in a particular way, like if the content is an attachment. Certain tasks, like searching, are isolated and are discussed later. Fundamentals of the JavaMail API Page 12 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Section 6. Using the JavaMail API Introduction You've seen how to work with the core parts of the JavaMail API. In the following sections you'll find a how-to approach for connecting the pieces to do specific tasks. Sending messages Sending an e-mail message involves getting a session, creating and filling a message, and sending it. You can specify your SMTP server by setting the mail.smtp.host property for the Properties object passed when getting the Session: String host = ...; String from = ...; String to = ...; // Get system properties Properties props = System.getProperties(); // Setup mail server props.put(&quot;mail.smtp.host&quot;, host); // Get session Session session = Session.getDefaultInstance(props, null); // Define message MimeMessage message = new MimeMessage(session); message.setFrom(new InternetAddress(from)); message.addRecipient(Message.RecipientType.TO, new InternetAddress(to)); message.setSubject(&quot;Hello JavaMail&quot;); message.setText(&quot;Welcome to JavaMail&quot;); // Send message Transport.send(message); You should place the code in a try-catch block, as setting up the message and sending it can throw exceptions. Exercise: Exercise 2. How to send your first message on page 23 Fetching messages For reading mail, you get a session, get and connect to an appropriate store for your mailbox, open the appropriate folder, and get your messages. Also, don't forget to close the connection when done. String host = ...; String username = ...; String password = ...; // Create empty properties Properties props = new Properties(); // Get session Session session = Session.getDefaultInstance(props, null); Fundamentals of the JavaMail API Page 13 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks // Get the store Store store = session.getStore(&quot;pop3&quot;); store.connect(host, username, password); // Get folder Folder folder = store.getFolder(&quot;INBOX&quot;); folder.open(Folder.READ_ONLY); // Get directory Message message[] = folder.getMessages(); for (int i=0, n=message.length; i<n; i++) { System.out.println(i + &quot;: &quot; + message[i].getFrom()[0] + &quot;\t&quot; + message[i].getSubject()); } // Close connection folder.close(false); store.close(); What you do with each message is up to you. The above code block just displays whom the message is from and the subject. Technically speaking, the list of from addresses could be empty and the getFrom()[0] call could throw an exception. To display the whole message, you can prompt the user after seeing the from and subject fields, and then call the message's writeTo() method if the user wants to see it. BufferedReader reader = new BufferedReader ( new InputStreamReader(System.in)); // Get directory Message message[] = folder.getMessages(); for (int i=0, n=message.length; i<n; i++) { System.out.println(i + &quot;: &quot; + message[i].getFrom()[0] + &quot;\t&quot; + message[i].getSubject()); System.out.println(&quot;Do you want to read message? &quot; + &quot;[YES to read/QUIT to end]&quot;); String line = reader.readLine(); if (&quot;YES&quot;.equals(line)) { message[i].writeTo(System.out); } else if (&quot;QUIT&quot;.equals(line)) { break; } } Exercise: Exercise 3. How to check for mail on page 25 Deleting messages and flags Deleting messages involves working with the Flags associated with the messages. There are different flags for different states, some system-defined and some user-defined. The predefined flags are defined in the inner class Flags.Flag and are listed below: * Flags.Flag.ANSWERED * Flags.Flag.DELETED * Flags.Flag.DRAFT * Flags.Flag.FLAGGED * Flags.Flag.RECENT * Flags.Flag.SEEN * Flags.Flag.USER Fundamentals of the JavaMail API Page 14 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Just because a flag exists doesn't mean the flag is supported by all mail servers or providers. For instance, except for deleting messages, the POP protocol supports none of them. Checking for new mail is not a POP task but a task built into mail clients. To find out what flags are supported, ask the folder with getPermanentFlags(). To delete messages, you set the message's DELETED flag: message.setFlag(Flags.Flag.DELETED, true); Open up the folder in READ_WRITE mode first though: folder.open(Folder.READ_WRITE); Then, when you are done processing all messages, close the folder, passing in a true value to expunge the deleted messages. folder.close(true); There is an expunge() method of Folder that can be used to delete the messages. However, it doesn't work for Sun's POP3 provider. Other providers may or may not implement the capabilities. It will more than likely be implemented for IMAP providers. Because POP only supports single access to the mailbox, you have to close the folder to delete the messages with Sun's provider. To unset a flag, just pass false to the setFlag() method. To see if a flag is set, check it with isSet(). Authenticating yourself You learned that you can use an Authenticator to prompt for username and password when needed, instead of passing them in as strings. Here you'll actually see how to more fully use authentication. Instead of connecting to the Store with the host, username, and password, you configure the Properties to have the host, and tell the Session about your custom Authenticator instance, as shown here: // Setup properties Properties props = System.getProperties(); props.put(&quot;mail.pop3.host&quot;, host); // Setup authentication, get session Authenticator auth = new PopupAuthenticator(); Session session = Session.getDefaultInstance(props, auth); // Get the store Store store = session.getStore(&quot;pop3&quot;); store.connect(); You then subclass Authenticator and return a PasswordAuthentication object from the getPasswordAuthentication() method. The following is one such implementation, with a single field for both. (This isn't a Project Swing tutorial; just enter the two parts in the one field, separated by a comma.) Fundamentals of the JavaMail API Page 15 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks import javax.mail.*; import javax.swing.*; import java.util.*; public class PopupAuthenticator extends Authenticator { public PasswordAuthentication getPasswordAuthentication() { String username, password; String result = JOptionPane.showInputDialog( &quot;Enter 'username,password'&quot;); StringTokenizer st = new StringTokenizer(result, &quot;,&quot;); username = st.nextToken(); password = st.nextToken(); return new PasswordAuthentication(username, password); } } Because the PopupAuthenticator relies on Swing, it will start up the event-handling thread for AWT. This basically requires you to add a call to System.exit() in your code to stop the program. Replying to messages The Message class includes a reply() method to configure a new Message with the proper recipient and subject, adding &quot;Re: &quot; if not already there. This does not add any content to the message, only copying the from or reply-to header to the new recipient. The method takes a boolean parameter indicating whether to reply to only the sender (false) or reply to all (true). MimeMessage reply = (MimeMessage)message.reply(false); reply.setFrom(new InternetAddress(&quot;[email protected]&quot;)); reply.setText(&quot;Thanks&quot;); Transport.send(reply); To configure the reply-to address when sending a message, use the setReplyTo() method. Exercise: Exercise 4. How to reply to mail on page 27 Forwarding messages Forwarding messages is a little more involved. There is no single method to call, and you build up the message to forward by working with the parts that make up a message. A mail message can be made up of multiple parts. Each part is a BodyPart , or more specifically, a MimeBodyPart when working with MIME messages. The different body parts get combined into a container called Multipart or, again, more specifically a MimeMultipart . To forward a message, you create one part for the text of your message and a second part with the message to forward, and combine the two into a multipart. Then you add the multipart to a properly addressed message and send it. That's essentially it. To copy the content from one message to another, just copy over its Fundamentals of the JavaMail API Page 16 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks DataHandler , a class from the JavaBeans Activation Framework. // Create the message to forward Message forward = new MimeMessage(session); // Fill in header forward.setSubject(&quot;Fwd: &quot; + message.getSubject()); forward.setFrom(new InternetAddress(from)); forward.addRecipient(Message.RecipientType.TO, new InternetAddress(to)); // Create your new message part BodyPart messageBodyPart = new MimeBodyPart(); messageBodyPart.setText( &quot;Here you go with the original message:\n\n&quot;); // Create a multi-part to combine the parts Multipart multipart = new MimeMultipart(); multipart.addBodyPart(messageBodyPart); // Create and fill part for the forwarded content messageBodyPart = new MimeBodyPart(); messageBodyPart.setDataHandler(message.getDataHandler()); // Add part to multi part multipart.addBodyPart(messageBodyPart); // Associate multi-part with message forward.setContent(multipart); // Send message Transport.send(forward); Working with attachments Attachments are resources associated with a mail message, usually kept outside of the message like a text file, spreadsheet, or image. As with common mail programs like Eudora and pine, you can attach resources to your mail message with the JavaMail API and get those attachments when you receive the message. Sending attachments: Sending attachments is quite like forwarding messages. You build up the parts to make the complete message. After the first part, your message text, you add other parts where the DataHandler for each is your attachment, instead of the shared handler in the case of a forwarded message. If you are reading the attachment from a file, your attachment data source is a FileDataSource . Reading from a URL, it is a URLDataSource . Once you have your DataSource, just pass it on to the DataHandler constructor, before finally attaching it to the BodyPart with setDataHandler(). Assuming you want to retain the original filename for the attachment, the last thing to do is to set the filename associated with the attachment with the setFileName() method of BodyPart. All this is shown here: // Define message Message message = new MimeMessage(session); message.setFrom(new InternetAddress(from)); message.addRecipient(Message.RecipientType.TO, new InternetAddress(to)); message.setSubject(&quot;Hello JavaMail Attachment&quot;); // Create the message part BodyPart messageBodyPart = new MimeBodyPart(); // Fill the message messageBodyPart.setText(&quot;Pardon Ideas&quot;); Fundamentals of the JavaMail API Page 17 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Multipart multipart = new MimeMultipart(); multipart.addBodyPart(messageBodyPart); // Part two is attachment messageBodyPart = new MimeBodyPart(); DataSource source = new FileDataSource(filename); messageBodyPart.setDataHandler(new DataHandler(source)); messageBodyPart.setFileName(filename); multipart.addBodyPart(messageBodyPart); // Put parts in message message.setContent(multipart); // Send the message Transport.send(message); When including attachments with your messages, if your program is a servlet, your users must upload the attachment besides telling you where to send the message. Uploading each file can be handled with a form encoding type of multipart/form-data. <FORM ENCTYPE=&quot;multipart/form-data&quot; method=post action=&quot;/myservlet&quot;> <INPUT TYPE=&quot;file&quot; NAME=&quot;thefile&quot;> <INPUT TYPE=&quot;submit&quot; VALUE=&quot;Upload&quot;> </FORM> Note: Message size is limited by your SMTP server, not the JavaMail API. If you run into problems, consider increasing the Java heap size by setting the ms and mx parameters. Exercise: Exercise 5. How to send attachments on page 28 Getting attachments: Getting attachments out of your messages is a little more involved then sending them because MIME has no simple notion of attachments. The content of your message is a Multipart object when it has attachments. You then need to process each Part, to get the main content and the attachment(s). Parts marked with a disposition of Part.ATTACHMENT from part.getDisposition() are clearly attachments. However, attachments can also come across with no disposition (and a non-text MIME type) or a disposition of Part.INLINE. When the disposition is either Part.ATTACHMENT or Part.INLINE, you can save off the content for that message part. Just get the original filename with getFileName() and the input stream with getInputStream(). Multipart mp = (Multipart)message.getContent(); for (int i=0, n=multipart.getCount(); i<n; i++) { Part part = multipart.getBodyPart(i)); String disposition = part.getDisposition(); if ((disposition != null) && ((disposition.equals(Part.ATTACHMENT) || (disposition.equals(Part.INLINE))) { saveFile(part.getFileName(), part.getInputStream()); } } The saveFile() method just creates a File from the filename, reads the bytes from the input stream, and writes them off to the file. In case the file already exists, a number is added to the end of the filename until one is found that doesn't exist. // from saveFile() File file = new File(filename); Fundamentals of the JavaMail API Page 18 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks for (int i=0; file.exists(); i++) { file = new File(filename+i); } The code above covers the simplest case where message parts are flagged appropriately. To cover all cases, handle when the disposition is null and get the MIME type of the part to handle accordingly. if (disposition == null) { // Check if plain MimeBodyPart mbp = (MimeBodyPart)part; if (mbp.isMimeType(&quot;text/plain&quot;)) { // Handle plain } else { // Special non-attachment cases here of image/gif, text/html, ... } ... } Processing HTML messages Sending HTML-based messages can be a little more work than sending plain text message, though it doesn't have to be that much more work. It all depends on your specific requirements. Sending HTML messages: If all you need to do is send the equivalent of an HTML file as the message and let the mail reader worry about fetching any embedded images or related pieces, use the setContent() method of Message, passing along the content as a String and setting the content type to text/html. String htmlText = &quot;<H1>Hello</H1>&quot; + &quot;<img src=\&quot;http://www.jguru.com/images/logo.gif\&quot;>&quot;; message.setContent(htmlText, &quot;text/html&quot;)); On the receiving end, if you fetch the message with the JavaMail API, there is nothing built into the API to display the message as HTML. The JavaMail API only sees it as a stream of bytes. To display the message as HTML, you must either use the Swing JEditorPane or some third-party HTML viewer component. if (message.getContentType().equals(&quot;text/html&quot;)) { String content = (String)message.getContent(); JFrame frame = new JFrame(); JEditorPane text = new JEditorPane(&quot;text/html&quot;, content); text.setEditable(false); JScrollPane pane = new JScrollPane(text); frame.getContentPane().add(pane); frame.setSize(300, 300); frame.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE); frame.show(); } Including images with your messages: On the other hand, if you want your HTML content message to be complete, with embedded images included as part of the message, you must treat the image as an attachment and reference the image with a special cid URL, where the cid is a reference to the Content-ID header of the image attachment. The process of embedding an image is quite similar to attaching a file to a message, the only Fundamentals of the JavaMail API Page 19 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks difference is you have to tell the MimeMultipart that the parts are related by setting its subtype in the constructor (or with setSubType()) and set the Content-ID header for the image to a random string which is used as the src for the image in the img tag. The following demonstrates this completely. String file = ...; // Create the message Message message = new MimeMessage(session); // Fill its headers message.setSubject(&quot;Embedded Image&quot;); message.setFrom(new InternetAddress(from)); message.addRecipient(Message.RecipientType.TO, new InternetAddress(to)); // Create your new message part BodyPart messageBodyPart = new MimeBodyPart(); String htmlText = &quot;<H1>Hello</H1>&quot; + &quot;<img src=\&quot;cid:memememe\&quot;>&quot;; messageBodyPart.setContent(htmlText, &quot;text/html&quot;); // Create a related multi-part to combine the parts MimeMultipart multipart = new MimeMultipart(&quot;related&quot;); multipart.addBodyPart(messageBodyPart); // Create part for the image messageBodyPart = new MimeBodyPart(); // Fetch the image and associate to part DataSource fds = new FileDataSource(file); messageBodyPart.setDataHandler(new DataHandler(fds)); messageBodyPart.setHeader(&quot;Content-ID&quot;,&quot;memememe&quot;); // Add part to multi-part multipart.addBodyPart(messageBodyPart); // Associate multi-part with message message.setContent(multipart); Exercise: Exercise 6. How to send HTML messages with images on page 29 Fundamentals of the JavaMail API Page 20 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Section 7. Searching with SearchTerm Introduction The JavaMail API includes a filtering mechanism found in the javax.mail.search package to build up a SearchTerm . Once built, you then ask a Folder what messages match, retrieving an array of Message objects: SearchTerm st = ...; Message[] msgs = folder.search(st); There are 22 different classes available to help you build a search term. * AND terms (class AndTerm) * OR terms (class OrTerm) * NOT terms (class NotTerm) * SENT DATE terms (class SentDateTerm) * CONTENT terms (class BodyTerm) * HEADER terms (FromTerm / FromStringTerm, RecipientTerm / RecipientStringTerm, SubjectTerm, etc..) Essentially, you build up a logical expression for matching messages, then search. For instance the following term searches for messages with a (partial) subject string of ADV or a from field of [email protected]. You might consider periodically running this query and automatically deleting any messages returned. SearchTerm st = new OrTerm( new SubjectTerm(&quot;ADV:&quot;), new FromStringTerm(&quot;[email protected]&quot;)); Message[] msgs = folder.search(st); Fundamentals of the JavaMail API Page 21 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Section 8. Exercises About the exercises These exercises are designed to provide help according to your needs. For example, you might simply complete the exercise given the information and the task list in the exercise body; you might want a few hints; or you may want a step-by-step guide to successfully complete a particular exercise. You can use as much or as little help as you need per exercise. Moreover, because complete solutions are also provided, you can skip a few exercises and still be able to complete future exercises requiring the skipped ones. Each exercise has a list of any prerequisite exercises, a list of skeleton code for you to start with, links to necessary API pages, and a text description of the exercise goal. In addition, there is help for each task and a solutions page with links to files that comprise a solution to the exercise. Exercise 1. How to set up a JavaMail environment In this exercise you will install Sun's JavaMail reference implementation. After installing, you will be introduced to the demonstration programs that come with the reference implementation. Task 1: Download the latest version of the JavaMail API implementation from Sun. Task 2: Download the latest version of the JavaBeans Activation Framework from Sun. Task 3: Unzip the downloaded packages. You get a ZIP file for all platforms for both packages. Help for task 3: You can use the jar tool to unzip the packages. Task 4: Add the mail.jar file from the JavaMail 1.2 download and the activation.jar file from the JavaBeans Activation Framework download to your CLASSPATH. Help for task 4: Copy the files to your extension library directory. For Microsoft Windows, using the default installation copy, the command might look like the following: cd \javamail-1.2 copy mail.jar \jdk1.3\jre\lib\ext cd \jaf-1.0.1 copy activation.jar \jdk1.3\jre\lib\ext If you don't like copying the files to the extension library directory, detailed instructions are available from Sun for setting your CLASSPATH on Windows NT. Task 5: Go into the demo directory that comes with the JavaMail API implementation and compile the msgsend program to send a test message. Help for task 5: javac msgsend.java Fundamentals of the JavaMail API Page 22 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Task 6: Execute the program passing in a from address with the -o option, your SMTP server with the -M option, and the to address (with no option). You'll then enter the subject, the text of your message, and the end-of-file character (CTRL-Z) to signal the end of the message input. Help for task 6: Be sure to replace the from address, SMTP server, and to address. java msgsend -o from@address -M SMTP.Server to@address If you are not sure of your SMTP server, contact your system administrator or check with your Internet Service Provider. Task 7: Check to make sure you received the message with your normal mail reader (Eudora, Outlook Express, pine, ...). Exercise 1. How to set up a JavaMail environment: Solution Upon successful completion, the JavaMail reference implementation will be in your CLASSPATH. Exercise 2. How to send your first message In the last exercise you sent a mail message using the demonstration program provided with the JavaMail implementation. In this exercise, you'll create the program yourself. For more help with exercises, see About the exercises on page 22 . Prerequisites: * Exercise 1. How to set up a JavaMail environment on page 22 Skeleton code: * MailExample.java Task 1: Starting with the skeleton code , get the system Properties. Help for task 1: Properties props = System.getProperties(); Task 2: Add the name of your SMTP server to the properties for the mail.smtp.host key. Fundamentals of the JavaMail API Page 23 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Help for task 2: props.put(&quot;mail.smtp.host&quot;, host); Task 3: Get a Session object based on the Properties. Help for task 3: Session session = Session.getDefaultInstance(props, null); Task 4: Create a MimeMessage from the session. Help for task 4: MimeMessage message = new MimeMessage(session); Task 5: Set the from field of the message. Help for task 5: message.setFrom(new InternetAddress(from)); Task 6: Set the to field of the message. Help for task 6: message.addRecipient(Message.RecipientType.TO, new InternetAddress(to)); Task 7: Set the subject of the message. Help for task 7: message.setSubject(&quot;Hello JavaMail&quot;); Task 8: Set the content of the message. Help for task 8: message.setText(&quot;Welcome to JavaMail&quot;); Task 9: Use a Transport to send the message. Help for task 9: Transport.send(message); Task 10: Compile and run the program, passing your SMTP server, from address, and to address on the command line. Fundamentals of the JavaMail API Page 24 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Help for task 10: java MailExample SMTP.Server from@address to@address Task 11: Check to make sure you received the message with your normal mail reader (Eudora, Outlook Express, pine, ...). Exercise 2. How to send your first message: Solution The following Java source file represents a solution to this exercise: * Solution/MailExample.java Exercise 3. How to check for mail In this exercise, create a program that displays the from address and subject for each message and prompts to display the message content. For more help with exercises, see About the exercises on page 22 . Prerequisites: * Exercise 1. How to set up a JavaMail environment on page 22 Skeleton Code * GetMessageExample.java Task 1: Starting with the skeleton code , get or create a Properties object. Help for task 1: Properties props = new Properties(); Task 2: Get a Session object based on the Properties. Help for task 2: Session session = Session.getDefaultInstance(props, null); Task 3: Get a Store for your e-mail protocol, either pop3 or imap. Help for task 3: Store store = session.getStore(&quot;pop3&quot;); Task 4: Connect to your mail host's store with the appropriate username and password. Fundamentals of the JavaMail API Page 25 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Help for task 4: store.connect(host, username, password); Task 5: Get the folder you want to read. More than likely, this will be the INBOX. Help for task 5: Folder folder = store.getFolder(&quot;INBOX&quot;); Task 6: Open the folder read-only. Help for task 6: folder.open(Folder.READ_ONLY); Task 7: Get a directory of the messages in the folder. Save the message list in an array variable named message. Help for task 7: Message message[] = folder.getMessages(); Task 8: For each message, display the from field and the subject. Help for task 8: System.out.println(i + &quot;: &quot; + message[i].getFrom()[0] + &quot;\t&quot; + message[i].getSubject()); Task 9: Display the message content when prompted. Help for task 9: System.out.println(message[i].getContent()); Task 10: Close the connection to the folder and store. Help for task 10: folder.close(false); store.close(); Task 11: Compile and run the program, passing your mail server, username, and password on the command line. Answer YES to the messages you want to read. Just hit ENTER if you don't. If you want to stop reading your mail before making your way through all the messages, enter QUIT. Help for task 11: java GetMessageExample POP.Server username password Fundamentals of the JavaMail API Page 26 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Exercise 3. How to check for mail: Solution The following Java source file represents a solution to this exercise. * Solution/GetMessageExample.java Exercise 4. How to reply to mail In this exercise, create a program that creates a canned reply message and attaches the original message if it's plain text. For more help with exercises, see About the exercises on page 22 . Prerequisites: * Exercise 3. How to check for mail on page 25 Skeleton Code: * ReplyExample.java Task 1: The skeleton code already includes the code to get the list of messages from the folder and prompt you to create a reply. Task 2: When answered affirmatively, create a new MimeMessage from the original message. Help for task 2: MimeMessage reply = (MimeMessage)message[i].reply(false); Task 3: Set the from field to your e-mail address. Task 4: Create the text for the reply. Include a canned message to start. When the original message is plain text, add each line of the original message, prefix each line with the &quot;> &quot; characters. Help for task 4: To check for plain text messages, check the messages MIME type with mimeMessage.isMimeType(&quot;text/plain&quot;). Task 5: Set the message's content, once the message content is fully determined. Task 6: Send the message. Task 7: Compile and run the program, passing your mail server, SMTP server, username, password, and from address on the command line. Answer YES to the messages you want to send replies. Just hit ENTER if you don't. If you want to stop going through your mail before Fundamentals of the JavaMail API Page 27 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks making your way through all the messages, enter QUIT. Help for task 7: java ReplyExample POP.Server SMTP.Server username password from@address Task 8: Check to make sure you received the message with your normal mail reader (Eudora, Outlook Express, pine, ...). Exercise 4. How to reply to mail: Solution The following Java source file represents a solution to this exercise. * Solution/ReplyExample.java Exercise 5. How to send attachments In this exercise, create a program that sends a message with an attachment. For more help with exercises, see About the exercises on page 22 . Prerequisites: * Exercise 2. How to send your first message on page 23 Skeleton Code: * AttachExample.java Task 1: The skeleton code already includes the code to get the initial mail session. Task 2: From the session, get a Message and set its header fields: to, from, and subject. Task 3: Create a BodyPart for the main message content and fill its content with the text of the message. Help for task 3: BodyPart messageBodyPart = new MimeBodyPart(); messageBodyPart.setText(&quot;Here's the file&quot;); Task 4: Create a Multipart to combine the main content with the attachment. Add the main content to the multipart. Help for task 4: Multipart multipart = new MimeMultipart(); multipart.addBodyPart(messageBodyPart); Fundamentals of the JavaMail API Page 28 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Task 5: Create a second BodyPart for the attachment. Task 6: Get the attachment as a DataSource. Help for task 6: DataSource source = new FileDataSource(filename); Task 7: Set the DataHandler for the message part to the data source. Carry the original filename along. Help for task 7: messageBodyPart.setDataHandler(new DataHandler(source)); messageBodyPart.setFileName(filename); Task 8: Add the second part of the message to the multipart. Task 9: Set the content of the message to the multipart. Help for task 9: message.setContent(multipart); Task 10: Send the message. Task 11: Compile and run the program, passing your SMTP server, from address, to address, and filename on the command line. This will send the file as an attachment. Help for task 11: java AttachExample SMTP.Server from@address to@address filename Task 12: Check to make sure you received the message with your normal mail reader (Eudora, Outlook Express, pine, ...). Exercise 5. How to send attachments: Solution The following Java source file represents a solution to this exercise. * Solution/AttachExample.java Exercise 6. How to send HTML messages with images In this exercise, create a program that sends an HTML message with an image attachment where the image is displayed within the HTML message. Fundamentals of the JavaMail API Page 29 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks For more help with exercises, see About the exercises on page 22 . Prerequisites: * Exercise 5. How to send attachments on page 28 Skeleton code: * logo.gif * HtmlImageExample.java Task 1: The skeleton code already includes the code to get the initial mail session, create the main message, and fill its headers (to, from, subject). Task 2: Create a BodyPart for the HTML message content. Task 3: Create a text string of the HTML content. Include a reference in the HTML to an image (<img src=&quot;...&quot;>) that is local to the mail message. Help for task 3: Use a cid URL. The content-id will need to be specified for the image later. String htmlText = &quot;<H1>Hello</H1>&quot; + &quot;<img src=\&quot;cid:memememe\&quot;>&quot;; Task 4: Set the content of the message part. Be sure to specify the MIME type is text/html. Help for task 4: messageBodyPart.setContent(htmlText, &quot;text/html&quot;); Task 5: Create a Multipart to combine the main content with the attachment. Be sure to specify that the parts are related. Add the main content to the multipart. Help for task 5: MimeMultipart multipart = new MimeMultipart(&quot;related&quot;); multipart.addBodyPart(messageBodyPart); Task 6: Create a second BodyPart for the attachment. Task 7: Get the attachment as a DataSource, and set the DataHandler for the message part to the data source. Task 8: Set the Content-ID header for the part to match the image reference specified in the HTML. Help for task 8: messageBodyPart.setHeader(&quot;Content-ID&quot;,&quot;memememe&quot;); Task 9: Add the second part of the message to the multipart, and set the content of the Fundamentals of the JavaMail API Page 30 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks message to the multipart. Task 10: Send the message. Task 11: Compile and run the program, passing your SMTP server, from address, to address, and filename on the command line. This will send the images as an inline image within the HTML text. Help for task 11: java HtmlImageExample SMTP.Server from@address to@address filename Task 12: Check if your mail reader recognizes the message as HTML and displays the image within the message, instead of as a link to an external attachment file. Help for task 12: If your mail reader can't display HTML messages, consider sending the message to a friend. Exercise 6. How to send HTML messages with images: Solution The following Java source files represent a solution to this exercise. * Solution/logo.gif * Solution/HtmlImageExample.java Fundamentals of the JavaMail API Page 31 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Section 9. Wrapup In summary The JavaMail API is a Java package used for reading, composing, and sending e-mail messages and their attachments. It lets you build standards-based e-mail clients that employ various Internet mail protocols, including SMTP, POP, IMAP, and MIME, as well as related protocols such as NNTP, S/MIME, and others. The API divides naturally into two parts. The first focuses on sending, receiving, and managing messages independent of the protocol used, whereas the second focuses on specific use of the protocols. The purpose of this tutorial was to show how to use the first part of the API, without attempting to deal with protocol providers. The core JavaMail API consists of seven classes --Session, Message, Address, Authenticator, Transport, Store, and Folder --all of which are found in javax.mail, the top-level package for the JavaMail API. We used these classes to work through a number of common e-mail-related tasks, including sending messages, retrieving messages, deleting messages, authenticating, replying to messages, forwarding messages, managing attachments, processing HTML-based messages, and searching or filtering mail lists. Finally, we provided a number of step-by-step exercises to help illustrate the concepts presented. Hopefully, this will help you add e-mail functionality to your platform-independent Java applications. Resources You can do much more with the JavaMail API than what's found here. The lessons and exercises found here can be supplemented by the following resources: * Download the JavaMail 1.2 API from the JavaMail API home page . * The JavaBeans Activation Framework is required for versions 1.2 and 1.1.3 of the JavaMail API. * The JavaMail-interest mailing list is a Sun-hosted discussion forum for developers. * Sun's JavaMail FAQ addresses the use of JavaMail in applets and servlets, as well as prototol-specific questions. * Tutorial author John Zukowski maintains jGuru's JavaMail FAQ . * Want to see how others are using JavaMail? Check out Sun's list of third-party products. * If you want more detail about JavaMail, read Rick Grehan's &quot;How JavaMail keeps it simple&quot; (Lotus Developer Network, June 2000). * Benoit Marchal shows how to use Java and XML to produce plain text and HTML newsletters in this two-part series, &quot;Managing e-zines with JavaMail and XSLT&quot; Part 1 (developerWorks, March 2001) and Part 2 (developerWorks, April 2001). * &quot;Linking Applications with E-mail&quot; (Lotus Developer Network, May 2000) discusses how groupware can facilitate communication, collaboration, and coordination among applications. Fundamentals of the JavaMail API Page 32 Presented by developerWorks, your source for great tutorials ibm.com/developerWorks Feedback Please let us know whether this tutorial was helpful to you and how we could make it better. We'd also like to hear about other tutorial topics you'd like to see covered. Thanks! For questions about the content of this tutorial, contact the author John Zukowski ( [email protected] ) Colophon This tutorial was written entirely in XML, using the developerWorks Toot-O-Matic tutorial generator. The Toot-O-Matic tool is a short Java program that uses XSLT stylesheets to convert the XML source into a number of HTML pages, a zip file, JPEG heading graphics, and PDF files. Our ability to generate multiple text and binary formats from a single source file illustrates the power and flexibility of XML. Fundamentals of the JavaMail API Page 33
Java 9 Programming By Example
05-03
Java 9 Programming By Example by Peter Verhas English | 26 Apr. 2017 | ASIN: B01KOG6SWI | 504 Pages | AZW3 | 4.1 MB Key Features We bridge the gap between &ldquo;learning&rdquo; and &ldquo;doing&rdquo; by providing real-world examples that will improve your software development Our example-based approach will get you started quickly with software programming, get you up-to-speed with Java 9, and improve your Java skills This book will show you the best practices of Java coding and improve your productivity Book Description This book gets you started with essential software development easily and quickly, guiding you through Java's different facets. By adopting this approach, you can bridge the gap between learning and doing immediately. You will learn the new features of Java 9 quickly and experience a simple and powerful approach to software development. You will be able to use the Java runtime tools, understand the Java environment, and create Java programs. We then cover more simple examples to build your foundation before diving to some complex data structure problems that will solidify your Java 9 skills. With a special focus on modularity and HTTP 2.0, this book will guide you to get employed as a top notch Java developer. By the end of the book, you will have a firm foundation to continue your journey towards becoming a professional Java developer. What you will learn Compile, package and run a trivial program using a build management tool Get to know the principles of test-driven development and dependency management Separate the wiring of multiple modules from the application logic into an application using dependency injection Benchmark Java execution using Java 9 microbenchmarking See the workings of the Spring framework and use Java annotations for the configuration Master the scripting API built into the Java language and use the built-in JavaScript interpreter Understand static versus dynamic implementation of code and high-order reactive programming in Java About the Author Peter Verhas is a senior software engineer and software architect having electrical engineering and economics background from TU Budapest (MsC) and PTE Hungary (MBA), and also studied at TU Delft and TU Vienna. He created his first programs in 1979, and since then he has authored several open source programs. He has worked in several positions in the telecommunications and finance industries and was the CIO of the Hungarian start-up index.hu during its early days. Peter works for EPAM Systems in Switzerland, participating in software development projects at various customer sites, and he supports talent acquisition by interviewing candidates, training programs for developers, and internal mentoring programs. You can follow Peter on Twitter at @verhas, LinkedIn, and GitHub, or read his technical blog, Java Deep, at http://javax0.wordpress.com. Table of Contents Getting Started with Java 9 The First Real Java Program - Sorting Names Optimizing the Sort - Making Code Professional Mastermind - Creating a Game Extending the Game - Run Parallel, Run Faster Making Our Game Professional - Do it as a Webapp Building a Commercial Web Application Using REST Extending Our E-Commerce Application Building an Accounting Application Using Reactive Programming Finalizing Java Knowledge to a Professional Level
Eclipse3.2绿色中文版无需安装
02-26
使用前需要先安装java虚拟机，安装jre1.6后就可以使用了。 否则会提示以下出错信息： A Java Runtime Environment(JRE) or Java Development Kit (JDK) must be available in order to run Eclipse. No Java virtual machine was found after searching the following locations: C:\Downloads\Eclipse3.2中文版\eclipse\jre\bin\javaw.exe 'javaw.exe' in your current PATH Eclipse是一种通用工具平台－普遍适用的开放式可扩展 IDE。它提供了功能丰富的开发环境，该环境允许开发者高效地创建一些能够无缝集成到 Eclipse平台中的工具。工作台基本概念可让你了解 Eclipse 工作台的基本概念；Java开发：熟悉使用Eclipse开发Java程序。 小组支持：了解如何与其他开发者合作。 Eclipse 插件开发：了解如何通过构建新插件来扩展 Eclipse。 通过完成一系列端到端教程，了解如何通过使用 Eclipse 来提高效率。 JAVA开发： 创建Hello World应用程序 了解如何创建简单Java应用程序来显示&ldquo;Hello world!&rdquo; 创建 Hello World SWT 应用程序 了解如何创建独立SWT Java应用程序来对用户显示一个窗口。 Eclipse 插件开发 创建 Eclipse 插件 这是一个端到端教程，用于说明如何创建插件、插件扩展、功能部件、更新站点及如何安装和卸载功能部件 创建富客户机平台（RCP）应用程序 这是一个端到端教程，用于说明如何创建插件、定义基于插件的产品、定制产品、导出 RCP 应用程序和定义基于功能部件的产品 通过安装预先准备好的样本来研究 Eclipse（可能需要连接因特网）。 多页面编辑器：显示如何创建具有多个页面的编辑器。 属性表和大纲：演示如何使用属性表和&ldquo;大纲&rdquo;视图。 自述文件工具：显示如何创建您自己的扩展点。 JDT：下列样本演示了如何插入到 Java 开发工具中。 Java 编辑器演示为定制文本编辑器提供的标准功能。 SWT：使用独立的 SWT 启动程序或者作为集成的工作台视图来运行 SWT 样本。 工作台视图和独立应用程序：SWT 示例启动程序可启动许多 SWT 示例。其中一些示例可独立于 eclipse 平台运行，其他的则作为工作台中的视图提供。
Java.9.Programming.By.Example.epub
11-13
Key Features We bridge the gap between &ldquo;learning&rdquo; and &ldquo;doing&rdquo; by providing real-world examples that will improve your software development Our example-based approach will get you started quickly with software programming, get you up-to-speed with Java 9, and improve your Java skills This book will show you the best practices of Java coding and improve your productivity Book Description This book gets you started with essential software development easily and quickly, guiding you through Java's different facets. By adopting this approach, you can bridge the gap between learning and doing immediately. You will learn the new features of Java 9 quickly and experience a simple and powerful approach to software development. You will be able to use the Java runtime tools, understand the Java environment, and create Java programs. We then cover more simple examples to build your foundation before diving to some complex data structure problems that will solidify your Java 9 skills. With a special focus on modularity and HTTP 2.0, this book will guide you to get employed as a top notch Java developer. By the end of the book, you will have a firm foundation to continue your journey towards becoming a professional Java developer. What you will learn Compile, package and run a trivial program using a build management tool Get to know the principles of test-driven development and dependency management Separate the wiring of multiple modules from the application logic into an application using dependency injection Benchmark Java execution using Java 9 microbenchmarking See the workings of the Spring framework and use Java annotations for the configuration Master the scripting API built into the Java language and use the built-in JavaScript interpreter Understand static versus dynamic implementation of code and high-order reactive programming in Java About the Author Peter Verhas is a senior software engineer and software architect having electrical engineering and economics background from TU Budapest (MsC) and PTE Hungary (MBA), and also studied at TU Delft and TU Vienna. He created his first programs in 1979, and since then he has authored several open source programs. He has worked in several positions in the telecommunications and finance industries and was the CIO of the Hungarian start-up index.hu during its early days. Peter works for EPAM Systems in Switzerland, participating in software development projects at various customer sites, and he supports talent acquisition by interviewing candidates, training programs for developers, and internal mentoring programs. You can follow Peter on Twitter at @verhas, LinkedIn, and GitHub, or read his technical blog, Java Deep, at http://javax0.wordpress.com. Table of Contents Chapter 1. Getting Started With Java 9 Chapter 2. The First Real Java Program - Sorting Names Chapter 3. Optimizing The Sort - Making Code Professional Chapter 4. Mastermind - Creating A Game Chapter 5. Extending The Game - Run Parallel, Run Faster Chapter 6. Making Our Game Professional - Do It As A Webapp Chapter 7. Building A Commercial Web Application Using Rest Chapter 8. Extending Our E-Commerce Application Chapter 9. Building An Accounting Application Using Reactive Programming Chapter 10. Finalizing Java Knowledge To A Professional Level
was内存溢出分析工具jca401
09-23
On some platforms, and in some cases, Javacore is known as &ldquo;Javadump&rdquo;. The code that creates Javacore is part of the JVM. You can control it by using environment variables and runtime switches. Javacore contains diagnostic information related to the JVM and a Java application captured at a point during execution. For example, the information can be about the operating system, the application environment, threads, native stack, locks, and memory. The exact contents are dependent on the platform on which you are running. By default, a Javacore occurs when the JVM terminates unexpectedly. A Javacore can also be triggered by sending specific signals to the JVM. Although Javacore or Javadump is present in Sun Solaris JVMs, much of the content of the Javacore is IBM value-add; that is, it is present only in IBM JVMs.
Ghidra安装指南
子曰小玖的博客
03-07 8856
The installation information provided is effective as of Ghidra 9.0 and is subject to change with future releases. Platforms Supported Minimum Requirements Installing Ghidra Installation Notes J...
the java runtime environment was not found_java异常：The superclass "javax.servlet.http.HttpServlet" wa...
weixin_30868873的博客
02-26 2323
目录：异常代码如下问题原因解决办法注意事项1.异常代码如下：The superclass "javax.servlet.http.HttpServlet" was not found on the Java Build Path。2.问题原因：原来Javaweb工程类中没有添加Tomcat运行时相关类导致。3.解决办法：下面是具体的解决方法：1、右击web工程-->属性或Build...
Eclipse启动问题：A java runtime Environment(JRE) or java Development的解决办法
热门推荐
weixin_42620513的博客
01-26 1万+
第一种情况：Java环境没有配置好（解决办法-------见上一篇文章） 第二种情况：javaw.exe路径缺失 1：Eclipse需要javaw.exe来启动，程序会先查找path目录，如果没有找到，会在eclipse的安装目录下查找，再找不到就会报如上面的错误。可以肯定的路径出问题了，如图： 2：eclipse启动时提示A java runtime Environment(JRE) or java Development，找到eclipse的安装目录，找出eclipse.ini文件并打开如下图`：
eclipse启动报错 A Java Runtime Environment (JRE) or Java Development Kit (JDK) must be availabl
qq_37432174的博客
11-13 1464
eclipse启动报错 A Java Runtime Environment (JRE) or Java Development Kit (JDK) must be availabl 解决方案: 1.环境变量 变量名：JAVA_HOME 变量值： C:\Program Files\Java\jdk1.7.0_80 变量名：CLASSPATH 变量值： .;%JAVA_HOME%\lib 在...
docker安装openoffice报javaldx: Could not find a Java Runtime Environment问题
Xiaojk的博客
11-18 2190
这个问题头疼了很久，原因是我docker基础镜像centos安装jdk1.8后不知道为什么openoffice识别不了，试过很多方法，最后是换了个带jdk的基础镜像 insideo/centos7-java8-build 就好了~
Tutorial_Java_Eclipse.rar_Eclipse_java eclipse
09-22
Eclipse的簡易安裝教學，希望對完全的入門新手有幫助
Tetris--java.zip_Tetris.java_eclipse写俄罗斯
09-20
不错的俄罗斯源码，语言java，平台eclipse
emp.zip_eclipse+emp_emp.jar_java EMP_javaweb_jdbc
09-21
简单的Javaweb实现，包括jdbc，servlet，jsp
200多个自己编的java程序.rar_Eclipse_java程序
09-21
200多个自己编的java程序.rar
java中代码折叠插件com.cb.eclipse.folding,亲测好用
06-11
java中代码折叠插件com.cb.eclipse.folding,com.cb.eclipse.folding_1.0.6.jar,使用方法百度,亲测可用,java中代码折叠插件com.cb.eclipse.folding,com.cb.eclipse.folding_1.0.6.jar,使用方法百度,亲测可用.java中...
关于__Federico Milano 的电力系统分析工具箱.zip
04-26
1.版本：matlab2014/2019a/2021a 2.附赠案例数据可直接运行matlab程序。 3.代码特点：参数化编程、参数可方便更改、代码编程思路清晰、注释明细。 4.适用对象：计算机，电子信息工程、数学等专业的大学生课程设计、期末大作业和毕业设计。
mlab-upenn 研究小组的心脏模型模拟.zip
04-26
1.版本：matlab2014/2019a/2021a 2.附赠案例数据可直接运行matlab程序。 3.代码特点：参数化编程、参数可方便更改、代码编程思路清晰、注释明细。 4.适用对象：计算机，电子信息工程、数学等专业的大学生课程设计、期末大作业和毕业设计。
混合图像创建大师matlab代码.zip
最新发布
04-26
1.版本：matlab2014/2019a/2021a 2.附赠案例数据可直接运行matlab程序。 3.代码特点：参数化编程、参数可方便更改、代码编程思路清晰、注释明细。 4.适用对象：计算机，电子信息工程、数学等专业的大学生课程设计、期末大作业和毕业设计。
中序遍历二叉树-java版本
04-26
在Java中，实现二叉树的中序遍历同样可以通过递归来完成。中序遍历的顺序是：首先递归地中序遍历左子树，然后访问根节点，最后递归地中序遍历右子树。 在这段代码中，Node类定义了二叉树的节点，BinaryTree类包含一个指向根节点的指针和inOrder方法，用于递归地进行中序遍历。printInOrder方法调用inOrder方法并打印出遍历的结果。 在Main类中，我们创建了一个示例二叉树，并调用printInOrder方法来输出中序遍历的结果。输出应该是：4 2 5 1 3，这表示中序遍历的顺序是左子树（4），然后是根节点（2），接着是右子树的左子树（5），然后是右子树的根节点（1），最后是右子树的右子树（3）。
a java runtime environment
03-16
Java运行时环境（Java Runtime Environment）是一种用于运行Java程序的软件环境。它包含了Java虚拟机（JVM）和Java类库，可以在不同的操作系统上运行Java程序。Java程序员可以使用Java开发工具（如Eclipse、NetBeans等）编写Java程序，然后使用Java运行时环境来运行这些程序。

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值