H3C服务器出厂系统密码,H3C S3100交换机不知道密码如何恢复出厂设置

最新推荐文章于 2024-08-18 23:00:54 发布

贾秋

最新推荐文章于 2024-08-18 23:00:54 发布

阅读量6k

点赞数 2

文章标签： H3C服务器出厂系统密码

本文档详细介绍了如何通过Bootroom菜单清除Console密码，以及在不同情况下恢复设备配置。首先，在设备启动时按Ctrl+B进入Bootroom，选择跳过当前配置启动，然后重启设备。如果需要保留之前的配置，可以通过TFTP服务器下载并修改配置文件，移除认证信息后上传并重启。整个过程旨在帮助管理员解决设备登录和配置恢复问题。

摘要由CSDN通过智能技术生成

3.1 进入bootroom菜单清除Consle密码

通过conlse线和crt软件连接并登陆设备，然后把设备断电重启。控制台上会打印如下信息，当出现“press Ctrl+B”的时候快速按住“Ctrl+B”进入botroom菜单

System is starting...Press Ctrl+D to access BASIC-BOOTWARE MENUBooting Normal Extend BootWareThe Extend BootWare is self-decompressing.......................Done!BootWare Validating...PressCtrl+Bto enter extended boot menu...

BotWare password: Not required. Please press Enter to continue.

Password recovery capability is enabled.

Note: The current operating device is flash

Enter to select device.

按住“Ctrl+B”进入如下菜单。选择“<6>Skip Current System Configuration”跳过当前配置启动,不同设备可能不是数字6，

======================================================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Restore to Factory Default Configuration |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Clear Super Password |

|<9> Storage Device Operation |

|<0> Reboot |

============================================================================

Ctrl+Z: Access EXTEND-ASSISTANT MENU

Ctrl+F: Format File System

Enter your choice(0-9): 6

Flag Set Success.

然后输入0重启设备

======================================================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Restore to Factory Default Configuration |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Clear Super Password |

|<9> Storage Device Operation |

|<0> Reboot |

============================================================================

Ctrl+Z: Access EXTEND-ASSISTANT MENU

Ctrl+F: Format File System

Enter your choice(0-9): 0

System is starting...

Press ENTER to get started.

3.2 如果不需要之前的配置信息的话

操作步骤：跳过启动文件后直接保存当前配置，再重启。

save

The current configuration will be written to the device. Are you sure? [Y/N]:y

Please input the file name(*.cfg)[flash:/startup.cfg]

(To leave the existing filename unchanged, press the enter key):(输入回车)

flash:/startup.cfg exists, overwrite? [Y/N]:y

Validating file. Please wait...

Configuration is saved to device successfully.

reboot

Start to check configuration with next startup configuration file, please wait.........DONE!

Current configuration may be lost after the reboot, save current configuration? [Y/N]:y

This command will reboot the device. Continue? [Y/N]:y

3.3 如果需要之前的配置信息的话

#Apr 26 12:02:07:166 2000 H3C SHELL/4/LOGIN:

Trap 1.3.6.1.4.1.25506.2.2.1.1.3.0.1: login from Console

%Apr 26 12:02:07:306 2000 H3C SHELL/5/SHELL_LOGIN: Console logged in from aux0.

dir %查看设备配置文件

Directory of flash:/

1 drw- - Apr 26 2000 12:00:20 logfile

2 -rw- 1666 Apr 26 2000 12:05:39 startup.cfg

3 -rw- 1556 Apr 26 2000 12:05:33 _startup_bak.cfg

4 -rw- 151 Apr 26 2000 12:05:30 system.xml

29106 KB total (16876 KB free)

给设备和电脑配置成同网段IP地址(举例：WAC配置成192.168.100.1，电脑配置成192.168.100.2)，在电脑上通过3CD软件搭建tftp服务器。

sys

System View: return to User View with Ctrl+Z.

[H3C]interface Vlan-interface 1

[H3C-Vlan-interface1]ip address 192.168.100.1 24

[H3C-Vlan-interface1]quit

[H3C]ping 192.168.100.2

PING 192.168.100.2: 56 data bytes, press CTRL_C to break

Reply from 192.168.100.2: bytes=56 Sequence=1 ttl=128 time=7 ms

Reply from 192.168.100.2: bytes=56 Sequence=2 ttl=128 time=2 ms

tftp 192.168.100.2 put startup.cfgFile will be transferred in binary modeSending file to remote TFTP server. Please wait... |TFTP: 1666 bytes sent in 0 second(s).File uploaded successfully.

下载成功：