荣耀4tp不支持鸿蒙,tp固件升级遇到的问题，烦请分析解决一下！

77平台，新思S3203的tp，在做升级固件时遇到了iic传输不成功的情况，但是如果iic传输不成功，为和tp还能正常工作？情各位同位知道的指点迷津，谢谢！

如下是关于升级图片固件失败log的关键部分！

77.221695] (1)[54:mmcqd/1][power/clkmgr] [freq_meter] data = 15495, freq = 196 MHz

[&nBSP;  77.711611] (0)[996:sh]#################update_firmware_store######################

[   77.712567] (0)[996:sh]#################       1        ######################

[   77.714338] (0)[996:sh]The if of synaptics device is : 1

[   77.715013] (0)[996:sh]#################       2        ######################

[   77.716303] (0)[996:sh]#################       3        ######################

[

77.726642] (0)[996:sh]I2C i2c-0: mt-i2c: the speed is too fast for this mode.

[   77.727663] (0)[996:sh]i2c i2c-0: I2C_ACKERR

[   77.728215] (0)[996:sh]i2c i2c-0: addr: 20, transfer error

[   77.728899] (0)[996:sh]i2c i2c-0: I2C structure:

[   77.728904] (0)[996:sh]Mode_ch1 1

[   77.728909] (0)[996:sh]St_rs 0

[   77.728913] (0)[996:sh]Op 1

[   77.728917] (0)[996:sh]Trans_len 1

[   77.728922] (0)[996:sh]Trans_num 1

[   77.728926] (0)[996:sh]Trans_auxlen 0

[   77.728930] (0)[996:sh]Data_size ffff

[   77.728935] (0)[996:sh]Irq_stat 3

[   77.728939] (0)[996:sh]Trans_stop 1

[   77.728943] (0)[996:sh]Trans_comp 1

[   77.728948] (0)[996:sh]Trans_error 2

[   77.734353] (0)[996:sh]i2c i2c-

0: I2C register:

[   77.734361] (0)[996:sh]SLAVE_ADDR 40

[   77.734366] (0)[996:sh]INTR_MASK 0

[   77.734370] (0)[996:sh]INTR_STAT 0

[   77.734375] (0)[996:sh]CONTROL 28

[   77.734379] (0)[996:sh]TRANSFER_LEN 1

[   77.734383] (0)[996:sh]TRANSAC_LEN 1

[   77.734388] (0)[996:sh]DELAY_LEN d7

[   77.734392] (0)[996:sh]TIMING 1001

[   77.734397] (0)[996:sh]start 0

[   77.734401] (0)[996:sh]FIFO_STAT 1101

[   77.734405] (0)[996:sh]IO_CONFIG 3

[   77.734410] (0)[996:sh]HS 102

[   77.734414] (0)[996:sh]DEBUGSTAT 40

[   77.740559] (0)[996:sh]i2c i2c-0: Power register:

[   77.740566] (0)[996:sh]CG 67fe55ff

[   77.741582] (0)[996:sh]i2c i2c-0: [mt_i2c_start_xfer] SOFTRESET mt-i2c:base(F1012000)

[   77.742575] (0)[99

6:sh]RMI4_read_PDT:638: read RIM4 PDT error!

[   77.743307] (0)[996:sh]RMI page func check error

[   77.743887] (0)[996:sh]i2c_update_firmware swordking synaptics_download has been excuted!

[   77.744979] (0)[996:sh]#################       4        ######################

[   77.745894] (0)[996:sh]#################       5        ######################

[   77.746801] (0)[996:sh]Update firmware failed!