c语言负数显表,C语言编程显示负数问题

求教各位，我能在屏上显示正数，为啥负数就乱码呢。帮看看哪里错了

void Operation_display();//运行显示

void runing();//运行

void main(void)

{

uchar devid;

DisplayStart();//启动画面

devid=Single_Read_ADXL345(0X00);

while(1)

{

Lcd12864_Displayfigure(0,1,-12345);

Lcd12864_Displayfigure(0,2,-1234);

Lcd12864_Displayfigure(0,3,-123);

Lcd12864_Displayfigure(0,4,-12);

Lcd12864_Displayfigure(4,1,12345);

Lcd12864_Displayfigure(4,2,1234);

Lcd12864_Displayfigure(4,3,123);

Lcd12864_Displayfigure(4,4,12);

/*        if((run_menu==0)&&(menukey()==1))

{

LCD12864_Clear();

Delay400Ms();

run_menu=1;

menuorede_word=1;

menu_y=0;

}

if((run_menu>=1)&&(menukey()==6))

{

LCD12864_Clear(); Delay400Ms();

run_menu=0;

}

switch(run_menu)

{

case(0):Multiple_read_ADXL345();Operation_display();break;

/*******************************************************************************

* 函 数 名         : Lcd12864_Displayfigure

* 函数功能                   : //显示数字

* 输    入         : x,y,*gigure

* 输    出         : 无

*******************************************************************************/

void Lcd12864_Displayfigure(unsigned char X, unsigned char Y,  int gigure)

{

unsigned char X2;

X2=X;

switch(Y)

{

case 1:X2|=0X80;break;        //根据行数来选择相应地址

case 2:X2|=0X90;break;

case 3:X2|=0X88;break;

case 4:X2|=0X98;break;

}

if(gigure<0)

{

//gigure=~gigure+1;

LCD12864_WriteCmd(X2);

LCD12864_WriteData('-');

LCD12864_WriteData('0' + (gigure/10000));//千位

LCD12864_WriteData('0' + (gigure%1000/100));//

LCD12864_WriteData(0x6b);//

//LCD12864_WriteData('0' + (gigure%1000%100/10));//十位

//LCD12864_WriteData('0' + (gigure%1000%100%10));//个位(0x87);

}

if(gigure>0)

{

LCD12864_WriteCmd(X2);

LCD12864_WriteData('0' + (gigure/1000));//千位

LCD12864_WriteData('0' + (gigure%1000/100));//

LCD12864_WriteData('0' + (gigure%1000%100/10));//十位

LCD12864_WriteData('0' + (gigure%1000%100%10));//个位(0x87);

}

}