redhat7网卡绑定

nmcli connection add type team con-name team0 ifname team0 config  ‘{"runner": {"name": "activebackup"}}’（指定网卡运行模式）

nmcli connection reload 

 nmcli connection show

[root@ZJHZ-BMC-test2 ~]# nmcli connection show

NAME        UUID                                  TYPE            DEVICE

con-team0   a9bf9dff-fbd0-408f-a765-f0bf0d5016fb  team            team0 

 

nmcli connection add type team-slave con-name 224  ifname ens224 master team0

 nmcli connection add type team-slave con-name 192 ifname ens192 master team0

[root@ZJHZ-BMC-test2 ~]# nmcli connection show

NAME        UUID                                  TYPE            DEVICE

224         4bde4c2a-794c-4514-a500-6e4ea52b6ab2  802-3-ethernet  ens224

192         db20bc00-223a-423c-b95e-6ffbb3b55522  802-3-ethernet  ens192

con-team0   a9bf9dff-fbd0-408f-a765-f0bf0d5016fb  team            team0 

 

nmcli connection modify team0 ipv4.addresses 192.168.111.123/24  （ip地址也可以添加网关）

nmcli connection modify team0 ipv4.method manual  （改为手动启动）

 

nmcli con up team0

 

teamdctl team0 state  (查看team状态)

setup:

  runner: activebackup

ports:

  ens224

    link watches:

      link summary: up

      instance[link_watch_0]:

        name: ethtool

        link: up

        down count: 0

  ens192

    link watches:

      link summary: up

      instance[link_watch_0]:

        name: ethtool

        link: up

        down count: 0

runner:

  active port: ens192

转载于:https://www.cnblogs.com/jiangguangming/p/6006660.html