linux x11 链接,linux – 设置X11转发ssh

我正在尝试设置x11转发来监视嵌入式机器人平台上的视频,但我似乎无法让板子生成图形输出.我在直接通过以太网连接的Beagleboard xM上运行Arch

Linux(虽然我以后打算使用WiFi).当我尝试设置DISPLAY变量它会接受它,但是当我尝试运行一个x11应用程序是说：

(Object:287): Gtk-WARNING **: cannot open display: [displaynamehere]

显然,[displaynamehere]是我试图设置为显示的,但没有显示位置似乎工作.什么奇怪的是,每当我通过ssh -X连接,它不给我任何错误,它不保存我的DISPLAY变量.

(编辑)我也检查了调试日志并得到这个输出：

debug2: load_server_config: filename /etc/ssh/sshd_config

debug2: load_server_config: done config len = 315

debug2: parse_server_config: config /etc/ssh/sshd_config len 315

debug3: /etc/ssh/sshd_config:53 setting AuthorizedKeysFile .ssh/authorized_keys

debug3: /etc/ssh/sshd_config:75 setting ChallengeResponseAuthentication no

debug3: /etc/ssh/sshd_config:96 setting UsePAM yes

debug3: /etc/ssh/sshd_config:101 setting X11Forwarding yes

debug3: /etc/ssh/sshd_config:104 setting PrintMotd no

debug3: /etc/ssh/sshd_config:108 setting UsePrivilegeSeparation sandBox

debug3: /etc/ssh/sshd_config:124 setting Subsystem sftp /usr/lib/ssh/sftp-server

debug1: sshd version OpenSSH_6.3,OpenSSL 1.0.1e 11 Feb 2013

debug3: Incorrect RSA1 identifier

debug1: read PEM private key done: type RSA

debug3: Incorrect RSA1 identifier

debug3: Could not load "/etc/ssh/ssh_host_rsa_key" as a RSA1 public key

debug1: private host key: #0 type 1 RSA

debug3: Incorrect RSA1 identifier

debug1: read PEM private key done: type DSA

debug3: Incorrect RSA1 identifier

debug3: Could not load "/etc/ssh/ssh_host_dsa_key" as a RSA1 public key

debug1: private host key: #1 type 2 DSA

debug3: Incorrect RSA1 identifier

debug1: read PEM private key done: type ECDSA

debug3: Incorrect RSA1 identifier

debug3: Could not load "/etc/ssh/ssh_host_ecdsa_key" as a RSA1 public key

debug1: private host key: #2 type 3 ECDSA

debug1: rexec_argv[0]='/usr/bin/sshd'

debug1: rexec_argv[1]='-ddd'

debug3: oom_adjust_setup

Set /proc/self/oom_score_adj from 0 to -1000

debug2: fd 3 setting O_NONBLOCK

debug1: Bind to port 22 on 0.0.0.0.

Bind to port 22 on 0.0.0.0 Failed: Address already in use.

debug2: fd 3 setting O_NONBLOCK

debug3: sock_set_v6only: set socket 3 IPV6_V6ONLY

debug1: Bind to port 22 on ::.

Server listening on :: port 22.

任何建议将不胜感激,我一直在尝试谷歌近一个星期,现在无济于事.

非常感谢！