ansible playbook批量改ssh配置文件，远程用户Permission denied

 最近手里的数百台服务器需要改/etc/ssh/sshd_config的参数，禁止root直接登陆，也就是说

[root@t0 ~]# cat /etc/ssh/sshd_config | grep Root
#PermitRootLogin yes

得改成

[root@t1 ~]# cat /etc/ssh/sshd_config| grep ^PermitRoot
PermitRootLogin no

一台台登上去改简直要死，ansible自动化运维工具听说还不错，之前就会用命令直接使用shell模块执行sed 替换配置文件里面的参数

[root@t0 ansible]# ansible all -b --become-method=su --become-user=root -m shell -a "sed 's/PermitRootLogin yes/PermitRootLogin no/g' /etc/ssh/sshd_config" | grep -E "Root|10.0"
 [WARNING]: Consider using the replace, lineinfile or template module rather than running sed.  If you need to use
command because replace, lineinfile or template is insufficient you can add warn=False to this command task or set
command_warnings=False in ansible.cfg to get rid of this message.
10.0.0.52 | CHANGED | rc=0 >>
#    $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $
PermitRootLogin no
# the setting of "PermitRootLogin without-password".
10.0.0.53 | CHANGED | rc=0 >>
#    $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $
PermitRootLogin no
# the setting of "PermitRootLogin without-password".

大概看个效果，这样做不仅效率低，而且你不能保证每台服务器的配置文件都是

#PermitRootLogin yes

也有可能是PermitRootLogin yes

所以不一定能达到自己的要求

然后根据提示信息，我看到了

replace, lineinfile template这三个模块
感兴趣的朋友可以自行研究一下
我今天用的是playbook用正则表达式匹配要更改的项
首先自己写一个playbook

[root@t0 playbook]# cat change_ssh.yml 
---
- hosts: test
  gather_facts: false
#  become: yes
#  become_method: su
  remote_user: root
  tasks:
  - name: "change file"
    lineinfile:
      path: /etc/ssh/sshd_config
      regexp: '^PermitRootLogin'
      line: 'PermitRootLogin yes'
      state: present
#    notify: restart sshd
#      handlers:
#        - name: restart sshd
#            service: name=sshd state=restarted

之前写的是没有注释的那些，注释的内容是我后来加上去的，待会再解释注释的意思

然后我的hosts文件

[root@t0 playbook]# cat ../hosts 
#[localhost]
#127.0.0.1
[test]
10.0.0.52
10.0.0.53
[test:vars]
ansible_ssh_pass=123456
ansible_ssh_user=test
ansible_become_pass=123456

执行以下命令

[root@t0 playbook]# ansible-playbook change_ssh.yml 

PLAY [test] ************************************************************************************************************

TASK [change file] *****************************************************************************************************
fatal: [10.0.0.53]: FAILED! => {"changed": false, "module_stderr": "Shared connection to 10.0.0.53 closed.\r\n", "module_stdout": "Traceback (most recent call last):\r\n  File \"/home/test/.ansible/tmp/ansible-tmp-1555555638.07-154814815296297/AnsiballZ_lineinfile.py\", line 113, in <module>\r\n    _ansiballz_main()\r\n  File \"/home/test/.ansible/tmp/ansible-tmp-1555555638.07-154814815296297/AnsiballZ_lineinfile.py\", line 105, in _ansiballz_main\r\n    invoke_module(zipped_mod, temp_path, ANSIBALLZ_PARAMS)\r\n  File \"/home/test/.ansible/tmp/ansible-tmp-1555555638.07-154814815296297/AnsiballZ_lineinfile.py\", line 48, in invoke_module\r\n    imp.load_module('__main__', mod, module, MOD_DESC)\r\n  File \"/tmp/ansible_lineinfile_payload_1q9ATP/__main__.py\", line 524, in <module>\r\n  File \"/tmp/ansible_lineinfile_payload_1q9ATP/__main__.py\", line 515, in main\r\n  File \"/tmp/ansible_lineinfile_payload_1q9ATP/__main__.py\", line 257, in present\r\nIOError: [Errno 13] Permission denied: '/etc/ssh/sshd_config'\r\n", "msg": "MODULE FAILURE\nSee stdout/stderr for the exact error", "rc": 1}
fatal: [10.0.0.52]: FAILED! => {"changed": false, "module_stderr": "Shared connection to 10.0.0.52 closed.\r\n", "module_stdout": "Traceback (most recent call last):\r\n  File \"/home/test/.ansible/tmp/ansible-tmp-1555555638.06-7599860498373/AnsiballZ_lineinfile.py\", line 113, in <module>\r\n    _ansiballz_main()\r\n  File \"/home/test/.ansible/tmp/ansible-tmp-1555555638.06-7599860498373/AnsiballZ_lineinfile.py\", line 105, in _ansiballz_main\r\n    invoke_module(zipped_mod, temp_path, ANSIBALLZ_PARAMS)\r\n  File \"/home/test/.ansible/tmp/ansible-tmp-1555555638.06-7599860498373/AnsiballZ_lineinfile.py\", line 48, in invoke_module\r\n    imp.load_module('__main__', mod, module, MOD_DESC)\r\n  File \"/tmp/ansible_lineinfile_payload_5xlcxo/__main__.py\", line 524, in <module>\r\n  File \"/tmp/ansible_lineinfile_payload_5xlcxo/__main__.py\", line 515, in main\r\n  File \"/tmp/ansible_lineinfile_payload_5xlcxo/__main__.py\", line 257, in present\r\nIOError: [Errno 13] Permission denied: '/etc/ssh/sshd_config'\r\n", "msg": "MODULE FAILURE\nSee stdout/stderr for the exact error", "rc": 1}
    to retry, use: --limit @/etc/ansible/playbook/change_ssh.retry

PLAY RECAP *************************************************************************************************************
10.0.0.52                  : ok=0    changed=0    unreachable=0    failed=1   
10.0.0.53                  : ok=0    changed=0    unreachable=0    failed=1   

结果是失败的，根据报错信息

IOError: [Errno 13] Permission denied: '/etc/ssh/sshd_config'

怀疑是权限的问题，因为根据我的hosts文件，默认是普通用户test去执行，所以在playbook里面加上两行

#  become: yes
#  become_method: su

意思就是，我ansible远程操作的时候，用户使用的时管理员的权限，然后再次执行

[root@t0 playbook]# ansible-playbook change_ssh.yml 

PLAY [test] ************************************************************************************************************

TASK [change file] *****************************************************************************************************
changed: [10.0.0.52]
changed: [10.0.0.53]

PLAY RECAP *************************************************************************************************************
10.0.0.52                  : ok=1    changed=1    unreachable=0    failed=0   
10.0.0.53                  : ok=1    changed=1    unreachable=0    failed=0   

查看远程主机的配置文件

[root@t1 ~]# cat /etc/ssh/sshd_config| grep ^PermitRoot
PermitRootLogin no

说明已经改成功了，但是如果配置文件有其他的设置，我们还需要其他的正则，而且sshd的配置文件改完之后需要重启才能生效，所以需要一个触发器，playbook需要做一下调整

---
#- hosts: 'test:!c2'
- hosts: c2
#- hosts: "`hosts`"
  gather_facts: false
  become: yes
  become_method: su
  remote_user: root
  tasks:
  - name: 'change sshd_config'
    lineinfile:
      dest: /etc/ssh/sshd_config
      regexp: "{{ item.regexp }}"
      line: "{{ item.line }}"
      state: present
    with_items:
#In this way
#    - { regexp: "^#PermitRootLogin yes",line: "PermitRootLogin no" }
#or
#    - regexp: "^#PermitRootLogin yes"
#      line: "PermitRootLogin no"
#Both methods have the same effect
    - { regexp: "PermitRootLogin yes",line: "PermitRootLogin no" }
    notify: restart sshd
  handlers:
    - name: restart sshd
      service: name=sshd state=restarted

 

 

总结：1. ansible如果hosts文件写的ansible_user时普通用户的时候，远程操作需要管理员权限，需要become的

  become: yes
  become_method: su

或者是

  become: yes
  become_method: sudo
  remote_user: test

 　　2. 执行完操作之后，利用触发器notify重启sshd服务

　　3. 需要继续学习，谢谢

转载于:https://www.cnblogs.com/augusite/p/10729784.html