Ubuntu12.04安装gimp-2.8
1.通过添加ppa源安装(如己安装2.6版,则要先卸载)
sudo add-apt-repository ppa:otto-kesselgulasch/gimp
sudo apt-get update
sudo atp-get install gimp gimp-plugin-registry gimp-data-extras
2.源码安装
先下载gimp-2.8的源码包
wget ftp://ftp.gimp.org/pub/gimp/v2.8/gimp-2.8.6.tar.bz2
tar -jxvf gimp-2.8.6.tar.bz2 -C /usr/local/src
cd /usr/local/src/gimp-2.8.6
以下是gimp2.8源码中的INSTALL文件,我们可以大致看一下她所依赖的库文件,当然,大部分的依赖库系统都支持的比较全,也是比较新的,这一点很大程度上是利益于ubuntu,实际是除去很多第三方库,在12.04上只要安装以下几个库即可。
1. You need to have installed a recent version of pkg-config available
from http://www.freedesktop.org/software/pkgconfig/.
2. You need intltool (at least 0.40.1, but preferably a newer version).
Intltool can be downloaded from
http://ftp.gnome.org/pub/gnome/sources/intltool/
3. You need to have GEGL version 0.2.0 or newer and babl version
0.1.10 or newer. You can get them from http://gegl.org/ or clone
them from the GNOME git repository:
git://git.gnome.org/babl
git://git.gnome.org/gegl
4. You need to have installed GTK+ version 2.24.10 or newer.
GIMP also need a recent versions of GLib (>= 2.30.2), GDK-Pixbuf
(>= 2.24.1), and Pango (>= 1.29.4). Sources for these can be grabbed
from ftp://ftp.gtk.org/.
5. We use cairo >= 1.10.2, which is hosted at
http://www.cairographics.org/.
6. We require PangoCairo, a Pango backend using Cairo. Make sure you
have Cairo, FreeType2 and fontconfig installed before you compile
Pango. GIMP depends on freetype2 being newer than version 2.1.7
and fontconfig 2.2.0 or newer. Older versions are known to have
bugs that seriously affect the stability of GIMP.
7. We use dbus-glib if available. Grab it from
http://dbus.freedesktop.org/releases/dbus-glib/
8. Access of remote files is implemented in the URI plug-in. There
are several possible implementations for this. The implementation
used is determined when you configure GIMP. By default the
GIO/GVfs backend is used. If you don't have GVfs support on your
target platform, you should pass the '--without-gvfs' option to
configure. The configure script will then try to detect another
method for accessing remote files.
9. You may want to install other third party libraries or programs
that are needed for some of the available plug-ins. We recommend
to check that the following libraries are installed: lcms,
libpng, libjpeg, libpoppler, libtiff, webkit, libmng, librsvg,
libwmf, libz, libbzip2, libgs (Ghostscript), libaa and libjasper.
10. The Python extension requires Python development headers to be
present. You will also need PyGTK and the respective development
headers.
11. Configure GIMP by running the `configure' script. You may want
to pass some options to it, see below.
12. Build GIMP by running `make'. The use of GNU make is recommended.
If you need to tweak the build to make it work with other flavours
of make, we'd appreciate if you'd send us a patch with the changes.
13. Install GIMP by running `make install'. In order to avoid clashes
with other versions of GIMP, we install a binary called gimp-2.8.
By default there's also a link created so that you can type 'gimp'
to start gimp-2.8.
Please make sure you don't have any old GTK+-2.x, jpeg, etc. libraries
lying around on your system, otherwise configure may fail to find the
new ones.
Generic instructions for configuring and compiling auto-configured
packages are included below. Here is an illustration of commands that
might be used to build and install GIMP. The actual configuration,
compilation and installation output is not shown.
% tar xvfz gimp-2.8.x.tar.gz # unpack the sources
% cd gimp-2.8.x # change to the toplevel directory
% ./configure # run the `configure' script
% make # build GIMP
% make install
1.通过添加ppa源安装(如己安装2.6版,则要先卸载)
sudo add-apt-repository ppa:otto-kesselgulasch/gimp
sudo apt-get update
sudo atp-get install gimp gimp-plugin-registry gimp-data-extras
2.源码安装
先下载gimp-2.8的源码包
wget ftp://ftp.gimp.org/pub/gimp/v2.8/gimp-2.8.6.tar.bz2
tar -jxvf gimp-2.8.6.tar.bz2 -C /usr/local/src
cd /usr/local/src/gimp-2.8.6
以下是gimp2.8源码中的INSTALL文件,我们可以大致看一下她所依赖的库文件,当然,大部分的依赖库系统都支持的比较全,也是比较新的,这一点很大程度上是利益于ubuntu,实际是除去很多第三方库,在12.04上只要安装以下几个库即可。
1. You need to have installed a recent version of pkg-config available
from http://www.freedesktop.org/software/pkgconfig/.
2. You need intltool (at least 0.40.1, but preferably a newer version).
Intltool can be downloaded from
http://ftp.gnome.org/pub/gnome/sources/intltool/
3. You need to have GEGL version 0.2.0 or newer and babl version
0.1.10 or newer. You can get them from http://gegl.org/ or clone
them from the GNOME git repository:
git://git.gnome.org/babl
git://git.gnome.org/gegl
4. You need to have installed GTK+ version 2.24.10 or newer.
GIMP also need a recent versions of GLib (>= 2.30.2), GDK-Pixbuf
(>= 2.24.1), and Pango (>= 1.29.4). Sources for these can be grabbed
from ftp://ftp.gtk.org/.
5. We use cairo >= 1.10.2, which is hosted at
http://www.cairographics.org/.
6. We require PangoCairo, a Pango backend using Cairo. Make sure you
have Cairo, FreeType2 and fontconfig installed before you compile
Pango. GIMP depends on freetype2 being newer than version 2.1.7
and fontconfig 2.2.0 or newer. Older versions are known to have
bugs that seriously affect the stability of GIMP.
7. We use dbus-glib if available. Grab it from
http://dbus.freedesktop.org/releases/dbus-glib/
8. Access of remote files is implemented in the URI plug-in. There
are several possible implementations for this. The implementation
used is determined when you configure GIMP. By default the
GIO/GVfs backend is used. If you don't have GVfs support on your
target platform, you should pass the '--without-gvfs' option to
configure. The configure script will then try to detect another
method for accessing remote files.
9. You may want to install other third party libraries or programs
that are needed for some of the available plug-ins. We recommend
to check that the following libraries are installed: lcms,
libpng, libjpeg, libpoppler, libtiff, webkit, libmng, librsvg,
libwmf, libz, libbzip2, libgs (Ghostscript), libaa and libjasper.
10. The Python extension requires Python development headers to be
present. You will also need PyGTK and the respective development
headers.
11. Configure GIMP by running the `configure' script. You may want
to pass some options to it, see below.
12. Build GIMP by running `make'. The use of GNU make is recommended.
If you need to tweak the build to make it work with other flavours
of make, we'd appreciate if you'd send us a patch with the changes.
13. Install GIMP by running `make install'. In order to avoid clashes
with other versions of GIMP, we install a binary called gimp-2.8.
By default there's also a link created so that you can type 'gimp'
to start gimp-2.8.
Please make sure you don't have any old GTK+-2.x, jpeg, etc. libraries
lying around on your system, otherwise configure may fail to find the
new ones.
Generic instructions for configuring and compiling auto-configured
packages are included below. Here is an illustration of commands that
might be used to build and install GIMP. The actual configuration,
compilation and installation output is not shown.
% tar xvfz gimp-2.8.x.tar.gz # unpack the sources
% cd gimp-2.8.x # change to the toplevel directory
% ./configure # run the `configure' script
% make # build GIMP
% make install