linux远程工作自由,使用samba在linux上远程工作

这是我想要完成的事情：

我正在与多个开发人员一起在PHP网站上工作。我刚刚安装了一个体面的Linux服务器，我们可以在其上工作。

这个想法是，每个人都在他/她自己的主目录中远程工作，这意味着，在那里有一个git存储库，并在他们自己的分支上工作。当它们完成后，应该推送到var / www中的远程存储库。这将作为测试区域。

现在我的问题是：我们都喜欢在Eclipse中工作，因为它现在拥有非常成熟的PHP支持。我们也喜欢在Windows 8.1上工作。用putty作为cli。

我已经阅读了很多关于远程工作的事情，但没有找到令人满意的答案。到目前为止，我已经尝试安装Samba，实际上是在您自己的主目录中工作。但我无法让它工作，因为当我浏览时，用户名/密码似乎与我的linux用户不匹配

\\ myservername \大卫

我有两个问题：

为什么我不能登录？

我不确定Samba是否可行，有更好的方法吗？

这是我的samba配置文件，我不确定那里是否缺少/错误：

# Sample configuration file for the Samba suite for Debian GNU/Linux.

#

#

# This is the main Samba configuration file. You should read the

# smb.conf(5) manual page in order to understand the options listed

# here. Samba has a huge number of configurable options most of which

# are not shown in this example

#

# Some options that are often worth tuning have been included as

# commented-out examples in this file.

# - When such options are commented with ";", the proposed setting

# differs from the default Samba behaviour

# - When commented with "#", the proposed setting is the default

# behaviour of Samba but the option is considered important

# enough to be mentioned here

#

# NOTE: Whenever you modify this file you should run the command

# "testparm" to check that you have not made any basic syntactic

# errors.

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of

workgroup = WORKGROUP

# server string is the equivalent of the NT Description field

server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:

# WINS Support - Tells the NMBD component of Samba to enable its WINS Server

# wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client

# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both

; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.

dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to

# This can be either the interface name or an IP address/netmask;

# interface names are normally preferred

; interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the

# 'interfaces' option above to use this.

# It is recommended that you enable this feature if your Samba machine is

# not protected by a firewall or is a firewall itself. However, this

# option cannot handle dynamic or non-broadcast interfaces correctly.

; bind interfaces only = yes

#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine

# that connects

log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).

max log size = 1000

# If you want Samba to only log through syslog then set the following

# parameter to 'yes'.

# syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything

# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log

# through syslog you should set the following parameter to something higher.

syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace

panic action = /usr/share/samba/panic-action %d

####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible

# values are "standalone server", "member server", "classic primary

# domain controller", "classic backup domain controller", "active

# directory domain controller".

#

# Most people will want "standalone sever" or "member server".

# Running as "active directory domain controller" will require first

# running "samba-tool domain provision" to wipe databases and create a

# new domain.

server role = standalone server

# If you are using encrypted passwords, Samba will need to know what

# password database type you are using.

passdb backend = tdbsam

obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix

# password with the SMB password when the encrypted SMB password in the

# passdb is changed.

unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following

# parameters must be set (thanks to Ian Kahan < for

# sending the correct chat script for the passwd program in Debian Sarge).

passwd program = /usr/bin/passwd %u

passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes

# when requested by an SMB client instead of the program listed in

# 'passwd program'. The default is 'no'.

pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped

# to anonymous connections

map to guest = bad user

########## Domains ###########

#

# The following settings only takes effect if 'server role = primary

# classic domain controller', 'server role = backup domain controller'

# or 'domain logons' is set

#

# It specifies the location of the user's

# profile directory from the client point of view) The following

# required a [profiles] share to be setup on the samba server (see

# below)

; logon path = \\%N\profiles\%U

# Another common choice is storing the profile in the user's home directory

# (this is Samba's default)

# logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set

# It specifies the location of a user's home directory (from the client

# point of view)

; logon drive = H:

# logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set

# It specifies the script to run during logon. The script must be stored

# in the [netlogon] share

# NOTE: Must be store in 'DOS' file format convention

; logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR

# RPC pipe. The example command creates a user account with a disabled Unix

# password; please adapt to your needs

; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the

# SAMR RPC pipe.

# The following assumes a "machines" group exists on the system

; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR

# RPC pipe.

; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration

# on a per machine basis. The %m gets replaced with the netbios name

# of the machine that is connecting

; include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges

# for something else.)

; idmap uid = 10000-20000

; idmap gid = 10000-20000

; template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders

# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.

; usershare max shares = 100

# Allow users who've been granted usershare privileges to create

# public shares, not just authenticated ones

usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)

# to enable the default home directory shares. This will share each

# user's home directory as \\server\username

[homes]

comment = Home Directories

browseable = no

# By default, the home directories are exported read-only. Change the

# next parameter to 'no' if you want to be able to write to them.

read only = no

# File creation mask is set to 0700 for security reasons. If you want to

# create files with group=rw permissions, set next parameter to 0775.

create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to

# create dirs. with group=rw permissions, set next parameter to 0775.

directory mask = 0700

# By default, \\server\username shares can be connected to by anyone

# with access to the samba server.

# Un-comment the following parameter to make sure that only "username"

# can connect to \\server\username

# This might need tweaking when using external authentication schemes

; valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons

# (you need to configure Samba to act as a domain controller too.)

;[netlogon]

; comment = Network Logon Service

; path = /home/samba/netlogon

; guest ok = yes

; read only = yes

# Un-comment the following and create the profiles directory to store

# users profiles (see the "logon path" option above)

# (you need to configure Samba to act as a domain controller too.)

# The path below should be writable by all users so that their

# profile directory may be created the first time they log on

;[profiles]

; comment = Users profiles

; path = /home/samba/profiles

; guest ok = no

; browseable = no

; create mask = 0600

; directory mask = 0700

[printers]

comment = All Printers

browseable = no

path = /var/spool/samba

printable = yes

guest ok = no

read only = yes

create mask = 0700

# Windows clients look for this share name as a source of downloadable

# printer drivers

[print$]

comment = Printer Drivers

path = /var/lib/samba/printers

browseable = yes

read only = yes

guest ok = no

# Uncomment to allow remote administration of Windows print drivers.

# You may need to replace 'lpadmin' with the name of the group your

# admin users are members of.

# Please note that you also need to set appropriate Unix permissions

# to the drivers directory for these users to have write rights in it

; write list = root, @lpadmin