C/C++ memmove 和 memcpy

这两个函数用于拷贝字符串或者一段连续的内存,函数原型:

void * memcpy ( void * destination, const void * source, size_t num );
void * memmove ( void * destination, const void * source, size_t num );

这里有一点需要注意:num指的是需要拷贝的字节数,所以在将void*转型成实际的类型的时候一定要考虑重新计算拷贝的单元数

比如,转成WORD型,则实际需要拷贝的单元数位num / 2

参看glibc里面对于这两个函数的实现:
void* memmove(void* dest, const void* src, size_t len)
{
  unsigned long int dstp = (long int) dest;
  unsigned long int srcp = (long int) src;

  /* This test makes the forward copying code be used whenever possible.
     Reduces the working set.  */
  if (dstp - srcp >= len)	/* *Unsigned* compare!  */
    {
      /* Copy from the beginning to the end.  */

      /* If there not too few bytes to copy, use word copy.  */
      if (len >= OP_T_THRES)
	{
	  /* Copy just a few bytes to make DSTP aligned.  */
	  len -= (-dstp) % OPSIZ;
	  BYTE_COPY_FWD (dstp, srcp, (-dstp) % OPSIZ);

	  /* Copy whole pages from SRCP to DSTP by virtual address
	     manipulation, as much as possible.  */

	  PAGE_COPY_FWD_MAYBE (dstp, srcp, len, len);

	  /* Copy from SRCP to DSTP taking advantage of the known
	     alignment of DSTP.  Number of bytes remaining is put
	     in the third argument, i.e. in LEN.  This number may
	     vary from machine to machine.  */

	  WORD_COPY_FWD (dstp, srcp, len, len);

	  /* Fall out and copy the tail.  */
	}

      /* There are just a few bytes to copy.  Use byte memory operations.  */
      BYTE_COPY_FWD (dstp, srcp, len);
    }
  else
    {
      /* Copy from the end to the beginning.  */
      srcp += len;
      dstp += len;

      /* If there not too few bytes to copy, use word copy.  */
      if (len >= OP_T_THRES)
	{
	  /* Copy just a few bytes to make DSTP aligned.  */
	  len -= dstp % OPSIZ;
	  BYTE_COPY_BWD (dstp, srcp, dstp % OPSIZ);

	  /* Copy from SRCP to DSTP taking advantage of the known
	     alignment of DSTP.  Number of bytes remaining is put
	     in the third argument, i.e. in LEN.  This number may
	     vary from machine to machine.  */

	  WORD_COPY_BWD (dstp, srcp, len, len);

	  /* Fall out and copy the tail.  */
	}

      /* There are just a few bytes to copy.  Use byte memory operations.  */
      BYTE_COPY_BWD (dstp, srcp, len);
    }

  return dest;
}

  有没有发现里面有一个不太“合适”的地方:

if (dstp - srcp >= len) /* *Unsigned* compare! */

如果dstp < srcp 呢?事实上C语言对这种行为早有定义:

        A computation involving unsigned operands can never overflow,
   because a result that cannot be represented by the resulting
   unsigned integer type is reduced modulo the number that is
   one greater than the largest value that can be represented by the resulting type.

简单说,unsigned(0) - unsigned(1) = -1 + UINT_MAX + 1

也就是说,memmove所要处理的重叠分两种:1、dst在src前面2、dst在src后面
如果dst 在src前面而又重叠,只需前向复制就没有问题,此时dst - src 本来应该是负数的,但由于是unsignd 类型,所以相当于加上UINTMAX + 1了,肯定比len大,按函数中第一种情形处理了
如果dst 在src后面而有重叠,这时需要反向复制,也就是第二种情形。

 

 

 

void *
memcpy (void* dst, const void* src, size_t len)
{
  unsigned long int dstp = (long int) dst;
  unsigned long int srcp = (long int) src;

  /* Copy from the beginning to the end.  */

  /* If there not too few bytes to copy, use word copy.  */
  if (len >= OP_T_THRES)
    {
      /* Copy just a few bytes to make DSTP aligned.  */
      len -= (-dstp) % OPSIZ;
      BYTE_COPY_FWD (dstp, srcp, (-dstp) % OPSIZ);

      /* Copy whole pages from SRCP to DSTP by virtual address manipulation,
	 as much as possible.  */

      PAGE_COPY_FWD_MAYBE (dstp, srcp, len, len);

      /* Copy from SRCP to DSTP taking advantage of the known alignment of
	 DSTP.  Number of bytes remaining is put in the third argument,
	 i.e. in LEN.  This number may vary from machine to machine.  */

      WORD_COPY_FWD (dstp, srcp, len, len);

      /* Fall out and copy the tail.  */
    }

  /* There are just a few bytes to copy.  Use byte memory operations.  */
  BYTE_COPY_FWD (dstp, srcp, len);

  return dst;
}

  可以发现memcpy比memmove少了检查destp - srcp >= len的部分,这带来了memmove的优越之处:可以处理目的地址于源地址重叠的情形!

     系统内置的memmove和memcpy是利用汇编优化的,当自己实现的时候,可以这么写:

void* n_memmove(void *dst, const void *src, size_t len) {
	char* dstp = (char*)dst;
	char* srcp = (char*)src;
	if (len == 0) return dst;
	assert(dst != NULL && src != NULL);
	if ((unsigned int)dst - (unsigned  int)src >= len) {
		//byte_copy_forward(dstp, srcp, len);
		for (int i = 0; i < len; i++)
			dstp[i] = srcp[i];
	}
	else {
		//copy from the end to the beginning
		//byte_copy_bwd(dstp, srcp, len);
		for (int i = len - 1; i >= 0; i--) 
			dstp[i] = srcp[i];
	}
	return dst;
}

void* n_memcpy(void* dst, const void* src, size_t len) {
	char* dstp = (char*)dst;
	char* srcp = (char*)src;
	assert(dst != NULL && src != NULL);
	if (len == 0) return dst;
	//byte_copy_forwar(dstp, srcp, len);
	for (int i = 0; i < len; i++) 
		dstp[i] = srcp[i];
	return dst;
}

  

 

转载于:https://www.cnblogs.com/hustxujinkang/p/4678742.html

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值