使用kudzu命令查看网卡型号
kudzu(1) kudzu(1)
NAME
kudzu - detects and configures new and/or changed hardware on a system
SYNOPSIS
kudzu
DESCRIPTION
kudzu detects and configures new and/or changed hardware on a system.
When started, kudzu detects the current hardware, and checks it against
a database stored in /etc/sysconfig/hwconf, if one exists. It then
determines if any hardware has been added or removed from the system.
If so, it gives the users the opportunity to configure any added hard-
ware, and unconfigure any removed hardware. It then updates the
database in /etc/sysconfig/hwconf.
If no previous database exists, kudzu attempts to determine what
devices have already been configured, by looking at /etc/modules.conf,
/etc/sysconfig/network-scripts/, and /etc/X11/XF86Config.
以下是这个命令执行的输出示例:
[root@wapdbrac1 ~]# kudzu --probe --class=network
-
class: NETWORK
bus: PCI
detached: 0
device: eth1
driver: bnx2
desc: "Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet"
network.hwaddr: 00:1B:78:97:E4:EA
vendorId: 14e4
deviceId: 164c
subVendorId: 103c
subDeviceId: 7038
pciType: 1
pcidom: 0
pcibus: 5
pcidev: 0
pcifn: 0
-
class: NETWORK
bus: PCI
detached: 0
device: eth0
driver: bnx2
desc: "Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet"
network.hwaddr: 00:1B:78:97:E4:EC
vendorId: 14e4
deviceId: 164c
subVendorId: 103c
subDeviceId: 7038
pciType: 1
pcidom: 0
pcibus: 3
pcidev: 0
pcifn: 0
By eygle on 2008-06-05 21:12 |
Comments (4) |
System | 1936 |
4 Comments
确实是个查看机器硬件详细情况的好方法:
其他的--class 可以查看 /etc/sysconfig/hwconfig
#cat /etc/sysconfig/hwconfig |grep class
我的SuSe Linux Enterprise Server 9 (i586)没有这个命令。我一般用dmidecode
to qsxing:
rhel4-u6下是:
[root@node115 ~]# cat /etc/sysconfig/hwconf | grep class
lspci不好用么?
可惜Linux目前不能像AIX那样定位硬件的位置吧?
而且不能确保下次的硬件检测、识别的顺序和上次是一样的吧?