wx.ToolBar
A toolbar is a bar of buttons and/or other controls usually placed below the menu bar in a wx.Frame.
You may create a toolbar that is managed by a frame calling wx.Frame.CreateToolBar
. Under Pocket PC
, you should always use this function for creating the toolbar to be managed by the frame, so that wxWidgets can use a combined menubar and toolbar. Where you manage your own toolbars, create wx.ToolBar as usual.
There are several different types of tools you can add to a toolbar. These types are controlled by the wx.ItemKind enumeration.
Note that many methods in wx.ToolBar such as wx.ToolBar.AddTool
return a ToolBarToolBase*
object. This should be regarded as an opaque handle representing the newly added toolbar item, providing access to its id and position within the toolbar. Changes to the item’s state should be made through calls to wx.ToolBar methods, for example wx.ToolBar.EnableTool
. Calls to wx.ToolBarToolBase methods (undocumented by purpose) will not change the visible state of the item within the tool bar.
wxMSW note: Note that under wxMSW toolbar paints tools to reflect system-wide colours. If you use more than 16 colours in your tool bitmaps, you may wish to suppress this behaviour, otherwise system colours in your bitmaps will inadvertently be mapped to system colours. To do this, set the msw.remap system option before creating the toolbar:
wx.SystemOptions.SetOption("msw.remap", 0)
If you wish to use 32-bit images (which include an alpha channel for transparency) use:
wx.SystemOptions.SetOption("msw.remap", 2)
Then colour remapping is switched off, and a transparent background used. But only use this option under Windows XP with True
colour:
if wx.GetApp().GetComCtl32Version() >= 600 and wx.DisplayDepth() >= 32: # Use the 32-bit images wx.SystemOptions.SetOption("msw.remap", 2)
Window Styles
This class supports the following styles:
wx.TB_FLAT
: Gives the toolbar a flat look (Windows and GTK only).wx.TB_DOCKABLE
: Makes the toolbar floatable and dockable (GTK only).wx.TB_HORIZONTAL
: Specifies horizontal layout (default).wx.TB_VERTICAL
: Specifies vertical layout.wx.TB_TEXT
: Shows the text in the toolbar buttons; by default only icons are shown.wx.TB_NOICONS
: Specifies no icons in the toolbar buttons; by default they are shown.wx.TB_NODIVIDER
: Specifies no divider (border) above the toolbar (Windows only)wx.TB_NOALIGN
: Specifies no alignment with the parent window (Windows only, not very useful).wx.TB_HORZ_LAYOUT
: Shows the text and the icons alongside, not vertically stacked (Windows and GTK 2 only). This style must be used withTB_TEXT
.wx.TB_HORZ_TEXT
: Combination ofTB_HORZ_LAYOUT
andTB_TEXT
.wx.TB_NO_TOOLTIPS
: Don’t show the short help tooltips for the tools when the mouse hovers over them.wx.TB_BOTTOM
: Align the toolbar at the bottom of parent window.wx.TB_RIGHT
: Align the toolbar at the right side of parent window.wx.TB_DEFAULT_STYLE
: Combination ofTB_HORIZONTAL
andTB_FLAT
. This style is new since wxWidgets 2.9.5.
See also
Window Styles. Note that the wxMSW native toolbar ignores TB_NOICONS
style. Also, toggling the TB_TEXT
works only if the style was initially on.
Events Emitted by this Class
Handlers bound for the following event types will receive a wx.CommandEvent parameter.
- EVT_TOOL: Process a
wxEVT_TOOL
event (a synonym forwxEVT_MENU
). Pass the id of the tool. - EVT_MENU: The same as EVT_TOOL().
- EVT_TOOL_RANGE: Process a
wxEVT_TOOL
event for a range of identifiers. Pass the ids of the tools. - EVT_MENU_RANGE: The same as EVT_TOOL_RANGE().
- EVT_TOOL_RCLICKED: Process a
wxEVT_TOOL_RCLICKED
event. Pass the id of the tool. (Not available on wxOSX.) - EVT_TOOL_RCLICKED_RANGE: Process a
wxEVT_TOOL_RCLICKED
event for a range of ids. Pass the ids of the tools. (Not available on wxOSX.) - EVT_TOOL_ENTER: Process a
wxEVT_TOOL_ENTER
event. Pass the id of the toolbar itself. The value ofwx.CommandEvent.GetSelection
is the tool id, or -1 if the mouse cursor has moved off a tool. (Not available on wxOSX.) - EVT_TOOL_DROPDOWN: Process a
wxEVT_TOOL_DROPDOWN
event. If unhandled, displays the default dropdown menu set usingwx.ToolBar.SetDropdownMenu
.
The toolbar class emits menu commands in the same way that a frame menubar does, so you can use one EVT_MENU() macro for both a menu item and a toolbar button. The event handler functions take a wx.CommandEvent argument. For most event macros, the identifier of the tool is passed, but for EVT_TOOL_ENTER() the toolbar window identifier is passed and the tool identifier is retrieved from the wx.CommandEvent. This is because the identifier may beID_ANY
when the mouse moves off a tool, and ID_ANY
is not allowed as an identifier in the event system.
See also
Methods Summary
__init__ | Default constructor. |
AddCheckTool | Adds a new check (or toggle) tool to the toolbar. |
AddControl | Adds any control to the toolbar, typically e.g. a wx.ComboBox. |
AddLabelTool | Old style method to add a tool in the toolbar. |
AddRadioTool | Adds a new radio tool to the toolbar. |
AddSeparator | Adds a separator for spacing groups of tools. |
AddSimpleTool | Old style method to add a tool to the toolbar. |
AddStretchableSpace | Adds a stretchable space to the toolbar. |
AddTool | Adds a tool to the toolbar. |
ClearTools | Deletes all the tools in the toolbar. |
CreateTool | Factory function to create a new toolbar tool. |
DeleteTool | Removes the specified tool from the toolbar and deletes it. |
DeleteToolByPos | This function behaves like DeleteTool but it deletes the tool at the specified position and not the one with the given id. |
EnableTool | Enables or disables the tool. |
FindById | Returns a pointer to the tool identified by id or None if no corresponding tool is found. |
FindControl | Returns a pointer to the control identified by id or None if no corresponding control is found. |
FindToolForPosition | Finds a tool for the given mouse position. |
GetMargins | Returns the left/right and top/bottom margins, which are also used for inter-toolspacing. |
GetToolBitmapSize | Returns the size of bitmap that the toolbar expects to have. |
GetToolByPos | Returns a pointer to the tool at ordinal position pos. |
GetToolClientData | Get any client data associated with the tool. |
GetToolEnabled | Called to determine whether a tool is enabled (responds to user input). |
GetToolLongHelp | Returns the long help for the given tool. |
GetToolPacking | Returns the value used for packing tools. |
GetToolPos | Returns the tool position in the toolbar, or NOT_FOUND if the tool is not found. |
GetToolSeparation | Returns the default separator size. |
GetToolShortHelp | Returns the short help for the given tool. |
GetToolSize | Returns the size of a whole button, which is usually larger than a tool bitmap because of added 3D effects. |
GetToolState | Gets the on/off state of a toggle tool. |
GetToolsCount | Returns the number of tools in the toolbar. |
InsertControl | Inserts the control into the toolbar at the given position. |
InsertLabelTool | Old style method to insert a tool in the toolbar. |
InsertSeparator | Inserts the separator into the toolbar at the given position. |
InsertSimpleTool | Old style method to insert a tool in the toolbar. |
InsertStretchableSpace | Inserts a stretchable space at the given position. |
InsertTool | Inserts the tool with the specified attributes into the toolbar at the given position. |
Realize | This function should be called after you have added tools. |
RemoveTool | Removes the given tool from the toolbar but doesn’t delete it. |
SetDropdownMenu | Sets the dropdown menu for the tool given by its id. |
SetMargins | Set the values to be used as margins for the toolbar. |
SetToolBitmapSize | Sets the default size of each tool bitmap. |
SetToolClientData | Sets the client data associated with the tool. |
SetToolDisabledBitmap | Sets the bitmap to be used by the tool with the given ID when the tool is in a disabled state. |
SetToolLongHelp | Sets the long help for the given tool. |
SetToolNormalBitmap | Sets the bitmap to be used by the tool with the given ID . |
SetToolPacking | Sets the value used for spacing tools. |
SetToolSeparation | Sets the default separator size. |
SetToolShortHelp | Sets the short help for the given tool. |
ToggleTool | Toggles a tool on or off. |
Properties Summary
Class API
-
class
-
Possible constructors:
ToolBar() ToolBar(parent, id=ID_ANY, pos=DefaultPosition, size=DefaultSize, style=TB_HORIZONTAL, name=ToolBarNameStr)
A toolbar is a bar of buttons and/or other controls usually placed below the menu bar in a Frame.
Methods
-
__init__ (self)
Default constructor.
__init__ (self, parent, id=ID_ANY, pos=DefaultPosition, size=DefaultSize, style=TB_HORIZONTAL, name=ToolBarNameStr)
Constructs a toolbar.
Parameters: - parent (wx.Window) – Pointer to a parent window.
- id (wx.WindowID) – Window identifier. If -1, will automatically create an identifier.
- pos (wx.Point) – Window position.
wx.DefaultPosition
indicates that wxWidgets should generate a default position for the window. If using the wx.Window class directly, supply an actual position. - size (wx.Size) – Window size.
wx.DefaultSize
indicates that wxWidgets should generate a default size for the window. - style (long) – Window style. See wx.ToolBar initial description for details.
- name (string) – Window name.
Note
After a toolbar is created, you use
AddTool
and perhapsAddSeparator
, and then you must callRealize
to construct and display the toolbar tools.
__init__
(self, *args, **kw)
-
Adds a new check (or toggle) tool to the toolbar.
The parameters are the same as in
AddTool
.Parameters: Return type: See also
AddCheckTool
(self, toolId, label, bitmap1, bmpDisabled=NullBitmap, shortHelp="", longHelp="", clientData=None)
-
Adds any control to the toolbar, typically e.g. a wx.ComboBox.
Parameters: - control (wx.Control) – The control to be added.
- label (string) – Text to be displayed near the control.
Return type: Note
wxMSW: the label is only displayed if there is enough space available below the embedded control.
Note
Mac: labels are only displayed if wxWidgets is built with
MAC_USE_NATIVE_TOOLBAR
set to 1
AddControl
(self, control, label="")
-
Old style method to add a tool in the toolbar.
Deprecated since version 3.0.3: Use
AddTool
instead.
AddLabelTool
(self, id, label, bitmap, bmpDisabled=wx.NullBitmap, kind=wx.ITEM_NORMAL, shortHelp="", longHelp="", clientData=None)
-
Adds a new radio tool to the toolbar.
Consecutive radio tools form a radio group such that exactly one button in the group is pressed at any moment, in other words whenever a button in the group is pressed the previously pressed button is automatically released. You should avoid having the radio groups of only one element as it would be impossible for the user to use such button.
By default, the first button in the radio group is initially pressed, the others are not.
Parameters: Return type: See also
AddRadioTool
(self, toolId, label, bitmap1, bmpDisabled=NullBitmap, shortHelp="", longHelp="", clientData=None)
-
Adds a separator for spacing groups of tools.
Notice that the separator uses the look appropriate for the current platform so it can be a vertical line (MSW, some versions of GTK) or just an empty space or something else.
Return type: wx.ToolBarToolBase See also
AddSeparator
(self)
-
Old style method to add a tool to the toolbar.
Deprecated since version 3.0.3: Use
AddTool
instead.
AddSimpleTool
(self, toolId, bitmap, shortHelpString="", longHelpString="", isToggle=0)
-
Adds a stretchable space to the toolbar.
Any space not taken up by the fixed items (all items except for stretchable spaces) is distributed in equal measure between the stretchable spaces in the toolbar. The most common use for this method is to add a single stretchable space before the items which should be right-aligned in the toolbar, but more exotic possibilities are possible, e.g. a stretchable space may be added in the beginning and the end of the toolbar to centre all toolbar items.
Return type: wx.ToolBarToolBase New in version 2.9.1.
See also
AddStretchableSpace
(self)
-
AddTool (self, tool)
Adds a tool to the toolbar.
Parameters: tool (wx.ToolBarToolBase) – The tool to be added. Return type: wx.ToolBarToolBase Note
After you have added tools to a toolbar, you must call
Realize
in order to have the tools appear.See also
AddSeparator
,AddCheckTool
,AddRadioTool
,InsertTool
,DeleteTool
,Realize
,SetDropdownMenu
AddTool (self, toolId, label, bitmap, shortHelp=””, kind=ITEM_NORMAL)
Adds a tool to the toolbar.
This most commonly used version has fewer parameters than the full version below which specifies the more rarely used button features.
Parameters: - toolId (int) – An integer by which the tool may be identified in subsequent operations.
- label (string) – The string to be displayed with the tool.
- bitmap (wx.Bitmap) – The primary tool bitmap.
- shortHelp (string) – This string is used for the tools tooltip.
- kind (ItemKind) – May be
ITEM_NORMAL
for a normal button (default),ITEM_CHECK
for a checkable tool (such tool stays pressed after it had been toggled) orITEM_RADIO
for a checkable tool which makes part of a radio group of tools each of which is automatically unchecked whenever another button in the group is checked.ITEM_DROPDOWN
specifies that a drop-down menu button will appear next to the tool button (only GTK+ and MSW). CallSetDropdownMenu
afterwards.
Return type: Note
After you have added tools to a toolbar, you must call
Realize
in order to have the tools appear.See also
AddSeparator
,AddCheckTool
,AddRadioTool
,InsertTool
,DeleteTool
,Realize
,SetDropdownMenu
AddTool (self, toolId, label, bitmap, bmpDisabled, kind=ITEM_NORMAL, shortHelpString=””, longHelpString=””, clientData=None)
Adds a tool to the toolbar.
Parameters: - toolId (int) – An integer by which the tool may be identified in subsequent operations.
- label (string) – The string to be displayed with the tool.
- bitmap (wx.Bitmap) – The primary tool bitmap.
- bmpDisabled (wx.Bitmap) – The bitmap used when the tool is disabled. If it is equal to
wx.NullBitmap
(default), the disabled bitmap is automatically generated by greying the normal one. - kind (ItemKind) – May be
ITEM_NORMAL
for a normal button (default),ITEM_CHECK
for a checkable tool (such tool stays pressed after it had been toggled) orITEM_RADIO
for a checkable tool which makes part of a radio group of tools each of which is automatically unchecked whenever another button in the group is checked.ITEM_DROPDOWN
specifies that a drop-down menu button will appear next to the tool button (only GTK+ and MSW). CallSetDropdownMenu
afterwards. - shortHelpString (string) – This string is used for the tools tooltip.
- longHelpString (string) – This string is shown in the statusbar (if any) of the parent frame when the mouse pointer is inside the tool.
- clientData (PyUserData) – An optional pointer to client data which can be retrieved later using
GetToolClientData
.
Return type: Note
After you have added tools to a toolbar, you must call
Realize
in order to have the tools appear.See also
AddSeparator
,AddCheckTool
,AddRadioTool
,InsertTool
,DeleteTool
,Realize
,SetDropdownMenu
AddTool
(self, *args, **kw)
-
Deletes all the tools in the toolbar.
ClearTools
(self)
-
CreateTool (self, toolId, label, bmpNormal, bmpDisabled=NullBitmap, kind=ITEM_NORMAL, clientData=None, shortHelp=””, longHelp=””)
Factory function to create a new toolbar tool.
Parameters: Return type:
CreateTool (self, control, label)
Factory function to create a new control toolbar tool.
Parameters: - control (wx.Control) –
- label (string) –
Return type:
CreateTool
(self, *args, **kw)
-
Removes the specified tool from the toolbar and deletes it.
If you don’t want to delete the tool, but just to remove it from the toolbar (to possibly add it back later), you may use
RemoveTool
instead.Parameters: toolId (int) – Return type: bool Returns: True
if the tool was deleted,False
otherwise.Note
It is unnecessary to call
Realize
for the change to take place, it will happen immediately.See also
DeleteTool
(self, toolId)
-
This function behaves like
DeleteTool
but it deletes the tool at the specified position and not the one with the given id.Parameters: pos (int) – Return type: bool
DeleteToolByPos
(self, pos)
-
Enables or disables the tool.
Parameters: - toolId (int) –
ID
of the tool to enable or disable, as passed toAddTool
. - enable (bool) – If
True
, enables the tool, otherwise disables it.
Note
Some implementations will change the visible state of the tool to indicate that it is disabled.
See also
- toolId (int) –
EnableTool
(self, toolId, enable)
-
Returns a pointer to the tool identified by id or
None
if no corresponding tool is found.Parameters: id (int) – Return type: wx.ToolBarToolBase
FindById
(self, id)
-
Returns a pointer to the control identified by id or
None
if no corresponding control is found.Parameters: id (int) – Return type: wx.Control
FindControl
(self, id)
-
Finds a tool for the given mouse position.
Parameters: - x (int) – X position.
- y (int) – Y position.
Return type: Returns: A pointer to a tool if a tool is found, or
None
otherwise.Note
Currently not implemented in wxGTK (always returns
None
there).
FindToolForPosition
(self, x, y)
-
Returns the left/right and top/bottom margins, which are also used for inter-toolspacing.
Return type: wx.Size See also
GetMargins
(self)
-
Returns the size of bitmap that the toolbar expects to have.
The default bitmap size is platform-dependent: for example, it is 16x15 for MSW and 24x24 for GTK. This size does not necessarily indicate the best size to use for the toolbars on the given platform, for this you should use
ArtProvider::GetNativeSizeHint(wxART_TOOLBAR)
but in any case, as the bitmap size is deduced automatically from the size of the bitmaps associated with the tools added to the toolbar, it is usually unnecessary to callSetToolBitmapSize
explicitly.Return type: wx.Size Note
Note that this is the size of the bitmap you pass to
AddTool
, and not the eventual size of the tool button.See also
GetToolBitmapSize
(self)
-
Returns a pointer to the tool at ordinal position pos.
Don’t confuse this with
FindToolForPosition
.Parameters: pos (int) – Return type: wx.ToolBarToolBase New in version 2.9.1.
See also
GetToolByPos
(self, pos)
-
Get any client data associated with the tool.
Parameters: toolId (int) – ID
of the tool in question, as passed toAddTool
.Return type: PyUserData Returns: Client data, or None
if there is none.
GetToolClientData
(self, toolId)
-
Called to determine whether a tool is enabled (responds to user input).
Parameters: toolId (int) – ID
of the tool in question, as passed toAddTool
.Return type: bool Returns: True
if the tool is enabled,False
otherwise.See also
GetToolEnabled
(self, toolId)
-
Returns the long help for the given tool.
Parameters: toolId (int) – ID
of the tool in question, as passed toAddTool
.Return type: string
See also
GetToolLongHelp
(self, toolId)
-
Returns the value used for packing tools.
Return type: int See also
GetToolPacking
(self)
-
Returns the tool position in the toolbar, or
NOT_FOUND
if the tool is not found.Parameters: toolId (int) – ID
of the tool in question, as passed toAddTool
.Return type: int
GetToolPos
(self, toolId)
-
Returns the default separator size.
Return type: int See also
GetToolSeparation
(self)
-
Returns the short help for the given tool.
Parameters: toolId (int) – ID
of the tool in question, as passed toAddTool
.Return type: string
See also
GetToolShortHelp
(self, toolId)
-
Returns the size of a whole button, which is usually larger than a tool bitmap because of added 3D effects.
Return type: wx.Size See also
GetToolSize
(self)
-
Gets the on/off state of a toggle tool.
Parameters: toolId (int) – ID
of the tool in question, as passed toAddTool
.Return type: bool Returns: True
if the tool is toggled on,False
otherwise.See also
GetToolState
(self, toolId)
-
Returns the number of tools in the toolbar.
Return type: int
GetToolsCount
(self)
-
Inserts the control into the toolbar at the given position.
You must call
Realize
for the change to take place.Parameters: - pos (int) –
- control (wx.Control) –
- label (string) –
Return type: See also
InsertControl
(self, pos, control, label="")
-
Old style method to insert a tool in the toolbar.
Deprecated since version 3.0.3: Use
InsertTool
instead.
InsertLabelTool
(self, pos, id, label, bitmap, bmpDisabled=wx.NullBitmap, kind=wx.ITEM_NORMAL, shortHelp="", longHelp="", clientData=None)
-
Inserts the separator into the toolbar at the given position.
You must call
Realize
for the change to take place.Parameters: pos (int) – Return type: wx.ToolBarToolBase See also
InsertSeparator
(self, pos)
-
Old style method to insert a tool in the toolbar.
Deprecated since version 3.0.3: Use
InsertTool
instead.
InsertSimpleTool
(self, pos, toolId, bitmap, shortHelpString="", longHelpString="", isToggle=0)
-
Inserts a stretchable space at the given position.
See
AddStretchableSpace
for details about stretchable spaces.Parameters: pos (int) – Return type: wx.ToolBarToolBase New in version 2.9.1.
See also
InsertStretchableSpace
(self, pos)
-
Inserts the tool with the specified attributes into the toolbar at the given position.
You must call
Realize
for the change to take place.Returns: The newly inserted tool or None
on failure. Notice that with the overload taking tool parameter the caller is responsible for deleting the tool in the latter case.See also
InsertTool (self, pos, toolId, label, bitmap, bmpDisabled=NullBitmap, kind=ITEM_NORMAL, shortHelp=””, longHelp=””, clientData=None)
Parameters: Return type:
InsertTool (self, pos, tool)
Parameters: - pos (int) –
- tool (wx.ToolBarToolBase) –
Return type:
InsertTool
(self, *args, **kw)
-
This function should be called after you have added tools.
Return type: bool
Realize
(self)
-
Removes the given tool from the toolbar but doesn’t delete it.
This allows to insert/add this tool back to this (or another) toolbar later.
Parameters: id (int) – Return type: wx.ToolBarToolBase Note
It is unnecessary to call
Realize
for the change to take place, it will happen immediately.See also
RemoveTool
(self, id)
-
Sets the dropdown menu for the tool given by its id.
The tool itself will delete the menu when it’s no longer needed. Only supported under GTK+ und MSW.
If you define a EVT_TOOL_DROPDOWN() handler in your program, you must call
wx.Event.Skip
from it or the menu won’t be displayed.Parameters: - id (int) –
- menu (wx.Menu) –
Return type: bool
SetDropdownMenu
(self, id, menu)
-
SetMargins (self, x, y)
Set the values to be used as margins for the toolbar.
Parameters: - x (int) – Left margin, right margin and inter-tool separation value.
- y (int) – Top margin, bottom margin and inter-tool separation value.
Note
This must be called before the tools are added if absolute positioning is to be used, and the default (zero-size) margins are to be overridden.
See also
SetMargins (self, size)
Set the margins for the toolbar.
Parameters: size (wx.Size) – Margin size. Note
This must be called before the tools are added if absolute positioning is to be used, and the default (zero-size) margins are to be overridden.
See also
SetMargins
(self, *args, **kw)
-
Sets the default size of each tool bitmap.
The default bitmap size is 16 by 15 pixels.
Parameters: size (wx.Size) – The size of the bitmaps in the toolbar. Note
This should be called to tell the toolbar what the tool bitmap size is. Call it before you add tools.
See also
SetToolBitmapSize
(self, size)
-
Sets the client data associated with the tool.
Parameters: - id (int) –
ID
of the tool in question, as passed toAddTool
. - clientData (PyUserData) – The client data to use.
- id (int) –
SetToolClientData
(self, id, clientData)
-
Sets the bitmap to be used by the tool with the given
ID
when the tool is in a disabled state.This can only be used on Button tools, not controls.
Parameters: Note
The native toolbar classes on the main platforms all synthesize the disabled bitmap from the normal bitmap, so this function will have no effect on those platforms.
SetToolDisabledBitmap
(self, id, bitmap)
-
Sets the long help for the given tool.
Parameters: - toolId (int) –
ID
of the tool in question, as passed toAddTool
. - helpString (string) – A string for the long help.
Note
You might use the long help for displaying the tool purpose on the status line.
See also
- toolId (int) –
SetToolLongHelp
(self, toolId, helpString)
-
Sets the bitmap to be used by the tool with the given
ID
.This can only be used on Button tools, not controls.
Parameters:
SetToolNormalBitmap
(self, id, bitmap)
-
Sets the value used for spacing tools.
The default value is 1.
Parameters: packing (int) – The value for packing. Note
The packing is used for spacing in the vertical direction if the toolbar is horizontal, and for spacing in the horizontal direction if the toolbar is vertical.
See also
SetToolPacking
(self, packing)
-
Sets the default separator size.
The default value is 5.
Parameters: separation (int) – The separator size. See also
SetToolSeparation
(self, separation)
-
Sets the short help for the given tool.
Parameters: - toolId (int) –
ID
of the tool in question, as passed toAddTool
. - helpString (string) – The string for the short help.
Note
An application might use short help for identifying the tool purpose in a tooltip.
See also
- toolId (int) –
SetToolShortHelp
(self, toolId, helpString)
-
Toggles a tool on or off.
This does not cause any event to get emitted.
Parameters: - toolId (int) –
ID
of the tool in question, as passed toAddTool
. - toggle (bool) – If
True
, toggles the tool on, otherwise toggles it off.
Note
Only applies to a tool that has been specified as a toggle tool.
- toolId (int) –
ToggleTool
(self, toolId, toggle)
Properties
-
See
GetMargins
andSetMargins
Margins
-
See
GetToolBitmapSize
andSetToolBitmapSize
ToolBitmapSize
-
See
GetToolPacking
andSetToolPacking
ToolPacking
-
See
GetToolSeparation
andSetToolSeparation
ToolSeparation
-
See
GetToolSize
ToolSize
-
See
GetToolsCount
ToolsCount
-
wx.
ToolBar
(Control)