keepalived安装

最新推荐文章于 2024-05-27 18:07:16 发布

weixin_30564785

最新推荐文章于 2024-05-27 18:07:16 发布

阅读量83

点赞数

文章标签：开发工具运维

原文链接：http://www.cnblogs.com/hwlong/p/6070065.html

版权

两台虚拟机

两台配置操作一样

环境配置

[root@lb01 /]# yum -y install openssl openssl-devel

[root@lb01 /]# yum -y install kernel-devel

做个软连接用tab键补全2.6.32-642.6.2.el6.x86_64

[root@lb01 /]# ln -s /usr/src/kernels/2.6.32-642.6.2.el6.x86_64/ /usr/src/linux
[root@lb01 /]# ls -l /usr/src/
total 8
drwxr-xr-x. 2 root root 4096 Sep 23  2011 debug
drwxr-xr-x. 3 root root 4096 Oct  6 11:05 kernels
lrwxrwxrwx  1 root root   43 Oct  6 11:09 linux -> /usr/src/kernels/2.6.32-642.6.2.el6.x86_64/

下载软件、解压、配置、编译、安装

[root@lb01 /]# wget http://www.keepalived.org/software/keepalived-1.2.16.tar.gz

[root@lb01 /]# tar zxvf keepalived-1.2.16.tar.gz
[root@lb01 /]# cd keepalived-1.2.16
[root@lb01 keepalived-1.2.16]# ./configure
Keepalived configuration
------------------------
Keepalived version       : 1.2.16
Compiler                 : gcc
Compiler flags           : -g -O2
Extra Lib                : -lssl -lcrypto -lcrypt 
Use IPVS Framework       : Yes
IPVS sync daemon support : Yes
IPVS use libnl           : No
fwmark socket support    : Yes
Use VRRP Framework       : Yes
Use VRRP VMAC            : Yes
SNMP support             : No
SHA1 support             : No
Use Debug flags          : No
[root@lb01 keepalived-1.2.16]# make
[root@lb01 keepalived-1.2.16]# make install

配置规范启动

[root@lb01 keepalived-1.2.16]# cp /usr/local/etc/rc.d/init.d/keepalived /etc/init.d/      #生成启动脚本
[root@lb01 keepalived-1.2.16]# cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/   #配置启动脚本的参数
[root@lb01 keepalived-1.2.16]# mkdir /etc/keepalived   #创建默认的keepalived配置文件路径
[root@lb01 keepalived-1.2.16]# cp /usr/local/etc/keepalived/keepalived.conf  /etc/keepalived/   #把keepalived.conf模板拷贝到/etckeepalived下
[root@lb01 keepalived-1.2.16]# cp /usr/local/sbin/keepalived /usr/sbin/
[root@lb01 keepalived-1.2.16]# /etc/init.d/keepalived start
Starting keepalived:                                       [  OK  ]
[root@lb01 keepalived-1.2.16]# ps -ef | grep keep
root      3490     1  0 11:36 ?        00:00:00 keepalived -D
root      3492  3490  0 11:36 ?        00:00:00 keepalived -D
root      3493  3490  0 11:36 ?        00:00:00 keepalived -D
root      3496  1537  0 11:36 pts/0    00:00:00 grep keep
[root@lb01 keepalived-1.2.16]# /etc/init.d/keepalived stop
Stopping keepalived:                                       [  OK  ]

配置文件详解

[root@lb01 keepalived-1.2.16]# cat /etc/keepalived/keepalived.conf 
! Configuration File for keepalived           #注释

global_defs {                   #全局配置
   notification_email {　　　　　　#邮件报警
     acassen@firewall.loc     #收件人
     failover@firewall.loc　　 #收件人
     sysadmin@firewall.loc　　　#收件人
   }
   notification_email_from Alexandre.Cassen@firewall.loc     #发件人
   smtp_server 192.168.200.1     #邮件服务器地址
   smtp_connect_timeout 30　　　　#超时时间
   router_id LVS_DEVEL           #keepavlied ID
}

vrrp_instance VI_1 {　　　　　　　　#VRRP的实例
    state MASTER　　　　　　　　　　 #服务器的状态
    interface eth0　　　　　　　　   #通信的端口
    virtual_router_id 51　　　　　　#这个实例的ID
    priority 100　　　　　　　　　　 #优先级
    advert_int 1　　　　　　　　　　　#心跳的间隔
    authentication { 　　　　　　#通信的密钥对
        auth_type PASS
        auth_pass 1111　　　　#越简单越好 保持默认就行
    }
    virtual_ipaddress {　　　　#VIP地址
        192.168.200.16
        192.168.200.17
        192.168.200.18
    }
}

修改配置文件

先备份一个配置文件

lb01配置文件

[root@lb01 keepalived-1.2.16]# cd /etc/keepalived/
[root@lb01 keepalived]# cp keepalived.conf keepalived.conf.bak
[root@lb01 keepalived]# vim keepalived.conf
! Configuration File for keepalived

global_defs {
   notification_email {
     acassen@firewall.loc
     failover@firewall.loc
     sysadmin@firewall.loc
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 192.168.200.1
   smtp_connect_timeout 30
   router_id LVS_01
}

vrrp_instance VI_1 {
    state MASTER
    interface eth0
    virtual_router_id 51
    priority 150
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.119.150/24
    }
}

lb02配置文件

[root@lb02 keepalived-1.2.16]# cd /etc/keepalived/
[root@lb02 keepalived]# cp keepalived.conf keepalived.conf.bak
[root@lb02 keepalived]# vim keepalived.conf
! Configuration File for keepalived

global_defs {
   notification_email {
     acassen@firewall.loc
     failover@firewall.loc
     sysadmin@firewall.loc
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 192.168.200.1
   smtp_connect_timeout 30
   router_id LVS_02
}

vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 51
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.119.150/24
    }
}

启动keepalived

[root@lb01 keepalived]# /etc/init.d/keepalived start
Starting keepalived:                                       [  OK  ]
[root@lb02 keepalived]# /etc/init.d/keepalived start
Starting keepalived:                                       [  OK  ]

在master(lb01)查看虚拟IP（192.168.119.150）

提示：使用ifconfig是查不到的；使用 ip add查询

[root@lb01 keepalived]# ip add | grep 192.168.119.150
    inet 192.168.119.150/24 scope global secondary eth0

在backup(lb02)查看(没有虚拟IP)

[root@lb02 keepalived]# ip add | grep 192.168.119.150

把master的keepalived服务down、虚拟IP就会自动切换到backup

[root@lb01 keepalived]# /etc/init.d/keepalived stop
Stopping keepalived:                                       [  OK  ]
[root@lb01 keepalived]# ip add | grep 192.168.119.150
[root@lb01 keepalived]#

backup查询

[root@lb02 keepalived]# ip add | grep 192.168.119.150
[root@lb02 keepalived]# ip add | grep 192.168.119.150
[root@lb02 keepalived]# ip add | grep 192.168.119.150
[root@lb02 keepalived]# ip add | grep 192.168.119.150
[root@lb02 keepalived]# ip add | grep 192.168.119.150
    inet 192.168.119.150/24 scope global secondary eth0
[root@lb02 keepalived]# ip add | grep 192.168.119.150
    inet 192.168.119.150/24 scope global secondary eth0