CentOS7配置keepalived(1) 编译安装keepalived

最新推荐文章于 2024-06-01 00:21:51 发布

毛小威

最新推荐文章于 2024-06-01 00:21:51 发布

阅读量2.1k

点赞数

分类专栏： Linux 文章标签： keepalive 运维 keepalived

本文链接：https://blog.csdn.net/oyym_mv/article/details/107105993

版权

Linux 专栏收录该内容

24 篇文章 2 订阅

订阅专栏

该文档在CentOS7.6系统下进行编译安装keepalived 2.0.20

主机名称	ip地址	操作系统	角色	软件版本
opsproxy-shqs-1	10.99.73.38 (real ip)	CentOS 7.6	keepalived	2.0.20
opsproxy-shqs-1	10.99.73.39 (real ip)	CentOS 7.6	keepalived	2.0.20
	10.99.73.40 (vip)		VIP

备注：
当前最新版本应该是2.1.3, 在centos7下编译安装后，功能一切正常，就是就是日志配置不生效（还是生成在/var/log/messages下，rsyslog的配置不生效）。
同样的方式编译安装2.0.20以及1系列版本1.4.5日志的配置是生效的。

一、编译安装keepalived

1.1 下载keepalived源码包

wget https://www.keepalived.org/software/keepalived-2.0.20.tar.gz
tar zxvf keepalived-2.0.20.tar.gz

1.2 编译安装keepalived

我的编译软件统一安装在/opt/app/install/目录下面，然后软连接到/opt/app/下面。所以这里设置keepalived的安装目录为/opt/app/install/keepalived

# 准备编译环境
yum install -y ipvsadm popt popt-devel libnl libnl-devel libnl3-devel libnfnetlink libnfnetlink-devel net-snmp-devel openssl openssl-devel

# 切换到keepalived源码根目录
cd keepalived-2.0.20

# 编译
./configure --with-init=systemd --with-systemdsystemunitdir=/usr/lib/systemd/system --prefix=/opt/app/install/keepalived --with-run-dir=/opt/app/install/keepalived/run 

make

# 安装
make install

# 可执行文件拷贝一份到系统执行文件目录，该目录在path变量里面，可以直接使用keepalived命令
cp /opt/app/install/keepalived/sbin/keepalived /usr/sbin/keepalived   
# 或者
# ln -s /opt/app/install/keepalived/sbin/keepalived /usr/sbin/keepalived

# 软连接（这一步谨是我自己对软件目录管理的需求）
ln -s /opt/app/install/keepalived /opt/app/keepalived

# keepalived附加参数文件，为了跟yum安装一致，其实是不用配置的。启动文件指定实际路径就可以了。
ln -s /opt/app/install/keepalived/etc/sysconfig/keepalived /etc/sysconfig/keepalived


# pid文件放置目录,目录可以自己定义在启动脚本里面使用
mkdir /opt/app/install/keepalived/run

1.3 配置system自启动文件

根据上面的编译安装，实际已经生成了启动文件，我们这里进行一些修改。

编写配置文件

vi /usr/lib/systemd/system/keepalived.service

[Unit]
Description=LVS and VRRP High Availability Monitor
After=network-online.target syslog.target
Wants=network-online.target

[Service]
Type=simple
PIDFile=/opt/app/keepalived/run/keepalived.pid
KillMode=process
EnvironmentFile=-/etc/sysconfig/keepalived
ExecStart=/usr/sbin/keepalived -f /opt/app/keepalived/etc/keepalived/keepalived.conf $KEEPALIVED_OPTIONS 
ExecReload=/bin/kill -HUP $MAINPID

[Install]
WantedBy=multi-user.target

加载文件
```
systemctl daemon-reload
```

以上，keepalived主备节点操作相同。

1.4 keepalived配置文件

这里仅仅是一个简单的配置文件,在haproxy服务中使用，部署验证这些就够了，更多参数配置需要了在补充吧。
配置文件目录/opt/app/keepalived/etc/keepalived/keepalived.conf

主备节点需要一致的参数:router_id ，virtual_router_id
主备节点优先级可以设置为主高备低：priority

Master节点

vi /opt/app/keepalived/etc/keepalived/keepalived.conf

global_defs {
   router_id haproxy
}
vrrp_script chk_haproxy {
    script "/opt/app/keepalived/etc/keepalived/chk_haproxy.sh"
    interval 2
    weight 2
}
vrrp_instance VI_1 {
    state MASTER
    interface eth0
    virtual_router_id 55
    priority 101
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        10.99.73.40
    }
    track_script {
        chk_haproxy
    }
}

backup节点

vi /opt/app/keepalived/etc/keepalived/keepalived.conf

global_defs {
   router_id haproxy
}
vrrp_script chk_haproxy {
    script "/opt/app/keepalived/etc/keepalived/chk_haproxy.sh"
    interval 2
    weight 2
}
vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 55
    priority 100 
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        10.99.73.40
    }
    track_script {
        chk_haproxy
    }
}

定义haproxy状态监控，如果haproxy没有运行，会监控到并主动拉起haproxy服务。

vi /opt/app/keepalived/etc/keepalived/chk_haproxy.sh
#!/bin/bash
if [ $(ps -C haproxy --no-header | wc -l) -eq 0 ]; then
        systemctl start haproxy
fi

chmod +x /opt/app/keepalived/etc/keepalived/chk_haproxy.sh

配置自启动
```
systemctl enable keepalived.service
```

启动服务

systemctl start keepalived.service
systemctl status keepalived.service

验证VIP的漂移

#-----------------------------------
# 1. 初次启动看下VIP
#-----------------------------------
# 主节点(master)
# ip add
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether fa:16:3e:5f:60:52 brd ff:ff:ff:ff:ff:ff
    inet 10.99.73.38/24 brd 10.99.73.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet 10.99.73.40/32 scope global eth0                    #这里
       valid_lft forever preferred_lft forever
# 备节点(backup)
# ip add
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether fa:16:3e:84:54:be brd ff:ff:ff:ff:ff:ff
    inet 10.99.73.39/24 brd 10.99.73.255 scope global eth0
       valid_lft forever preferred_lft forever

#-----------------------------------
# 2. 关闭主节点keepalived服务
#-----------------------------------
# 主节点(master)
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether fa:16:3e:5f:60:52 brd ff:ff:ff:ff:ff:ff
    inet 10.99.73.38/24 brd 10.99.73.255 scope global eth0        #可以看到VIP已经漂走了
       valid_lft forever preferred_lft forever
# 备节点(backup)
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether fa:16:3e:84:54:be brd ff:ff:ff:ff:ff:ff
    inet 10.99.73.39/24 brd 10.99.73.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet 10.99.73.40/32 scope global eth0                     #可以看到VIP已经漂过来了，很快很快
       valid_lft forever preferred_lft forever

#-----------------------------------
# 3. 重新开启主节点keepalived服务，因为我们配置的主节点优先级比较高，虽然备节点正常，但VIP还是会漂过来的。
#-----------------------------------
# 主节点(master)
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether fa:16:3e:5f:60:52 brd ff:ff:ff:ff:ff:ff
    inet 10.99.73.38/24 brd 10.99.73.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet 10.99.73.40/32 scope global eth0
# 备节点(backup)
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether fa:16:3e:84:54:be brd ff:ff:ff:ff:ff:ff
    inet 10.99.73.39/24 brd 10.99.73.255 scope global eth0
       valid_lft forever preferred_lft forever

验证监控脚本会自动拉起haproxy

# 查看当前haproxy状态，确认启动时间以及PID
systemctl status haproxy|grep -A 1 Active
   Active: active (running) since Fri 2020-07-03 16:11:25 CST; 4min 27s ago
 Main PID: 3942 (haproxy)

# 执行关闭haproxy，查看是否被自动拉起服务
systemctl stop haproxy
systemctl status haproxy|grep -A 1 Active
   Active: active (running) since Fri 2020-07-03 16:16:47 CST; 601ms ago
 Main PID: 8382 (haproxy)

可以看到haproxy被keepalived自动拉起来了，验证完成。

1.5 日志配置

编辑启动环境变量文件，将日志配置到local[0-7]中的一个，这里配置到local1 （因为我已经将haproxy的日志配置到local0）

vi /opt/app/install/keepalived/etc/sysconfig/keepalived
# Options for keepalived. See `keepalived --help' output and keepalived(8) and
# keepalived.conf(5) man pages for a list of all options. Here are the most
# common ones :
#
# --vrrp               -P    Only run with VRRP subsystem.
# --check              -C    Only run with Health-checker subsystem.
# --dont-release-vrrp  -V    Dont remove VRRP VIPs & VROUTEs on daemon stop.
# --dont-release-ipvs  -I    Dont remove IPVS topology on daemon stop.
# --dump-conf          -d    Dump the configuration data.
# --log-detail         -D    Detailed log messages.
# --log-facility       -S    0-7 Set local syslog facility (default=LOG_DAEMON)
#

KEEPALIVED_OPTIONS="-D -d -S 1"

配置rsyslog

vi /etc/rsyslog.d/keepalived.conf
$ModLoad imudp
$UDPServerRun 514
local1.* /var/log/keepalived.log

重启rsyslog，然后重启keepalived

systemctl restart rsyslog
systemctl restart keepalived

systemctl status keepalived
● keepalived.service - LVS and VRRP High Availability Monitor
   Loaded: loaded (/usr/lib/systemd/system/keepalived.service; enabled; vendor preset: disabled)
   Active: active (running) since Sun 2020-07-05 00:55:27 CST; 427ms ago
  Process: 32314 ExecStart=/usr/sbin/keepalived -f /opt/app/keepalived/etc/keepalived/keepalived.conf $KEEPALIVED_OPTIONS (code=exited, status=0/SUCCESS)
 Main PID: 32315 (keepalived)
    Tasks: 2
   Memory: 704.0K
   CGroup: /system.slice/keepalived.service
           ├─32315 /usr/sbin/keepalived -f /opt/app/keepalived/etc/keepalived/keepalived.conf -D -d -S 1
           └─32316 /usr/sbin/keepalived -f /opt/app/keepalived/etc/keepalived/keepalived.conf -D -d -S 1

可以看到配置已经生效了。

tail -f  /var/log/keepalived.log
...<省略>

毛小威

关注

0
点赞
踩
4

收藏

觉得还不错? 一键收藏
0
评论
CentOS7配置keepalived(1) 编译安装keepalived

该文档在CentOS7.6系统下进行编译安装keepalived 2.1.3主机名称ip地址操作系统角色软件版本备注opsproxy-shqs-110.99.73.38 (real ip)CentOS 7.6keepalived2.1.3当前最新版本opsproxy-shqs-110.99.73.39 (real ip)CentOS 7.6keepalived2.1.3当前最新版本10.99.73.40 (vip)VIP一、编译安
复制链接

扫一扫