centos oracle libaio哪下载,在CentOS4.5上安装Oracle10g出现的libaio-0.3.96; found Not found问题求救...

最新推荐文章于 2023-01-18 10:46:33 发布
最新推荐文章于 2023-01-18 10:46:33 发布
阅读量231 收藏
点赞数
文章标签： centos oracle libaio哪下载
在尝试在 CentOS 4.5 的 Vmware Server 上安装 Oracle 10g 时，遇到 Prerequisite checks 阶段的 libaio-0.3.96 包缺失问题。升级到 libaio-0.3.105-2.i386.rpm 后仍存在问题，提示物理内存不足。文章详细记录了检查和建议，包括内存扩大和静态IP配置。
摘要由CSDN通过智能技术生成

我在Vmvare Server上的CentOS4.5版本上安装Oracle10g，在安装过程中的Prerequisite checks的过程中提示找不到libaio-0.3.96这个RPM包。我在安装光盘的ISO文件里只找到了libaio-0.3.105-2.i386.rpm包，好像这个版本要高一些。但是安装这个包后check不过去，总有警告提示，并且如果忽视警告安装的话，最后安装不成功。

下面是拷贝的Check结果的提示，有两条警告。请大家帮忙分析解决。谢谢。

Checking operating system requirements ...

Expected result: One of redhat-3,redhat-4,SuSE-9,asianux-1,asianux-2

Actual Result: redhat-4

Check complete. The overall result of this check is: Passed

=======================================================================

Checking operating system package requirements ...

Checking for make-3.79; found make-1:3.80-6.EL4.

Checking for binutils-2.14; found binutils-2.15.92.0.2-22.

Checking for gcc-3.2; found gcc-3.4.6-8.

Checking for libaio-0.3.96; found Not found.

Check complete. The overall result of this check is: Failed <<<<

Problem: Some packages required for the Oracle Database 10g to function properly are missing (see above).

Recommendation: Install the required packages before continuing with the installation.

=======================================================================

Checking kernel parameters

Checking for semmsl=250; found semmsl=250.

Checking for semmns=32000; found semmns=32000.

Checking for semopm=100; found semopm=100.

Checking for semmni=128; found semmni=128.

Checking for shmmax=536870912; found shmmax=2147483648.

Checking for shmmni=4096; found shmmni=4096.

Checking for shmall=2097152; found shmall=2097152.

Checking for file-max=65536; found file-max=65536.

Checking for VERSION=2.6.9; found VERSION=2.6.9-55.ELsmp.

Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=1024 - 65000.

Checking for rmem_default=262144; found rmem_default=4194304.

Checking for rmem_max=262144; found rmem_max=4194304.

Checking for wmem_default=262144; found wmem_default=262144.

Checking for wmem_max=262144; found wmem_max=262144.

Check complete. The overall result of this check is: Passed

=======================================================================

Checking Recommended glibc version

Expected result: ATLEAST=2.3.2-95.27

Actual Result: 2.3.4-2.36

Check complete. The overall result of this check is: Passed

=======================================================================

Checking physical memory requirements ...

Expected result: 922MB

Actual Result: 344MB

Check complete. The overall result of this check is: Failed <<<<

Problem: The system does not have sufficient physical memory to perform the install.

Recommendation: Increase the amount of physical memory available to your system before continuing with the installation.

=======================================================================

Checking available swap space requirements ...

Expected result: 688MB

Actual Result: 698MB

Check complete. The overall result of this check is: Passed

=======================================================================

Checking Network Configuration requirements ...

Check complete. The overall result of this check is: Not executed <<<<

Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses.  However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly.  See the Installation Guide for more details on installing the software on systems configured with DHCP.

=======================================================================

Validating ORACLE_BASE location (if set) ...

Check complete. The overall result of this check is: Passed

=======================================================================

Checking Oracle Home path for spaces...

Check complete. The overall result of this check is: Passed

=======================================================================

Checking for proper system clean-up....

Check complete. The overall result of this check is: Passed

=======================================================================

Checking for Oracle Home incompatibilities ....

Actual Result: NEW_HOME

Check complete. The overall result of this check is: Passed

=======================================================================

Checking operating system package requirements ...

Checking for make-3.79; found make-1:3.80-6.EL4.

Checking for binutils-2.14; found binutils-2.15.92.0.2-22.

Checking for gcc-3.2; found gcc-3.4.6-8.

Checking for libaio-0.3.96; found Not found.

Check complete. The overall result of this check is: Failed <<<<

Problem: Some packages required for the Oracle Database 10g to function properly are missing (see above).

Recommendation: Install the required packages before continuing with the installation.

=======================================================================

Checking physical memory requirements ...

Expected result: 922MB

Actual Result: 344MB

Check complete. The overall result of this check is: Failed <<<<

Problem: The system does not have sufficient physical memory to perform the install.

Recommendation: Increase the amount of physical memory available to your system before continuing with the installation.

=======================================================================

Checking Network Configuration requirements ...

Check complete. The overall result of this check is: Not executed <<<<

Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses.  However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly.  See the Installation Guide for more details on installing the software on systems configured with DHCP.

=======================================================================

Checking operating system package requirements ...

Checking for make-3.79; found make-1:3.80-6.EL4.

Checking for binutils-2.14; found binutils-2.15.92.0.2-22.

Checking for gcc-3.2; found gcc-3.4.6-8.

Checking for libaio-0.3.96; found Not found.

Check complete. The overall result of this check is: Failed <<<<

Problem: Some packages required for the Oracle Database 10g to function properly are missing (see above).

Recommendation: Install the required packages before continuing with the installation.

=======================================================================

Checking physical memory requirements ...

Expected result: 922MB

Actual Result: 344MB

Check complete. The overall result of this check is: Failed <<<<

Problem: The system does not have sufficient physical memory to perform the install.

Recommendation: Increase the amount of physical memory available to your system before continuing with the installation.

=======================================================================

Checking Network Configuration requirements ...

Check complete. The overall result of this check is: Not executed <<<<

Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses.  However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly.  See the Installation Guide for more details on installing the software on systems configured with DHCP.

=======================================================================

Checking operating system package requirements ...

Checking for make-3.79; found make-1:3.80-6.EL4.

Checking for binutils-2.14; found binutils-2.15.92.0.2-22.

Checking for gcc-3.2; found gcc-3.4.6-8.

Checking for libaio-0.3.96; found Not found.

Check complete. The overall result of this check is: Failed <<<<

Problem: Some packages required for the Oracle Database 10g to function properly are missing (see above).

Recommendation: Install the required packages before continuing with the installation.

=======================================================================

Checking physical memory requirements ...

Expected result: 922MB

Actual Result: 344MB

Check complete. The overall result of this check is: Failed <<<<

Problem: The system does not have sufficient physical memory to perform the install.

Recommendation: Increase the amount of physical memory available to your system before continuing with the installation.

=======================================================================

Checking Network Configuration requirements ...

Check complete. The overall result of this check is: Not executed <<<<

Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses.  However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly.  See the Installation Guide for more details on installing the software on systems configured with DHCP.

=======================================================================

Checking operating system package requirements ...

Checking for make-3.79; found make-1:3.80-6.EL4.

Checking for binutils-2.14; found binutils-2.15.92.0.2-22.

Checking for gcc-3.2; found gcc-3.4.6-8.

Checking for libaio-0.3.96; found Not found.

Check complete. The overall result of this check is: Failed <<<<

Problem: Some packages required for the Oracle Database 10g to function properly are missing (see above).

Recommendation: Install the required packages before continuing with the installation.

=======================================================================

Checking physical memory requirements ...

Expected result: 922MB

Actual Result: 344MB

Check complete. The overall result of this check is: Failed <<<<

Problem: The system does not have sufficient physical memory to perform the install.

Recommendation: Increase the amount of physical memory available to your system before continuing with the installation.

=======================================================================

Checking Network Configuration requirements ...

Check complete. The overall result of this check is: Not executed <<<<

Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses.  However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly.  See the Installation Guide for more details on installing the software on systems configured with DHCP.

=======================================================================

图图阿图西
关注
  • 0
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
libaio.zip安装包
11-07
libaio.zip安装包
Linux离线安装MySQL
hnht1989的博客
10-07 3733
Linux离线安装MySQL下载安装包安装 下载安装包 MySQL离线安装包下载地址：https://dev.mysql.com/downloads/mysql/ 在安装过程，经常会报error while loading shared libraries: libaio.so.1，这是由于缺少libaio库，下载地址：http://www.rpmfind.net/linux/rpm2html/search.php?query=libaio(x86-64) 安装 将mysql和libaio安装包都上传
oracle 10g（R2）客户端安装
oligaga的博客
01-18 842
oracle 10g（R2）客户端安装
MySQL的安装
qq_43526870的博客
04-19 650
[mysqld] # 设置3306端口 port=3306 # 自定义设置mysql的安装目录，即解压mysql压缩包的目录 basedir=E:\MySQL\mysql-8.0.15-winx64 # 自定义设置mysql数据库的数据存放目录 datadir=E:\MySQL\mysqlDate # 允许最大连接数 max_connections=200 # 允许连接失败的次数，这是为...
Centos安装mysql数据库必须包libaio-0.3.107-10.el6.x86_64
04-26
用于Centos操作系统，安装mysql数据时，...如果您在安装时候，报这个错误可以下载，如下： mysqld: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
libaio-0.3.109-13.el7.x86_64.rpm.rar
05-06
标题中的"libaio-0.3.109-13.el7.x86_64.rpm"是一个Linux系统中的软件包，它包含了Linux异步I/O库（libaio）的一个版本。libaio是一种原生的、高性能的接口，用于在Linux操作系统上进行非阻塞I/O操作。它是许多需要...
libaio.0.3.107-10.el6.x86_64.0.3.107-10.zip
05-13
libaio.0.3.107-10.el6.x86_64.rpm是针对CentOS 7系统的libaio库的一个特定版本，其中“0.3.107-10”代表了库的版本号，“el6”表示它是为Red Hat Enterprise Linux 6（RHEL6）兼容的，而“x86_64”则表明这是64位的...
libaio-devel-0.3.106-3.2.i386.rpm
10-28
标题中的"libaio-devel-0.3.106-3.2.i386.rpm"是一个Linux软件包的名称，它属于开发工具类别，主要用于处理I/O操作。libaio，全称Linux Asynchronous Input/Output，是Linux内核提供的一种原生异步I/O接口，它允许...
libaio-devel-0.3.109-13.el7.i686.rpm
12-02
离线安装包，亲测可用
libaio-0.3.105-i386.rar
10-22
libaio-0.3.105-i386,libaio-0.3.105-i386,libaio-0.3.105-i386,希望能对你有所帮助
libaio-0.3.105.i386.rpm
07-17
libaio-0.3.105.i386.rpm
libaio-0.3.105-2.i386.rar
07-31
在系统处于内网状态,无法使用yum进行下载时可以在这里进行下载解压,然后使用rpm -ivh进行安装
centos7 - mysql 离线安装
MDJ_D2T的博客
12-12 1329
一、前言 mysql版本：5.7.11 mysql官方下载地址：https://dev.mysql.com/downloads/mysql/ 需要的安装包 ： libaio-0.3.109-13.el7.x86_64.rpm mysql-community-devel-5.7.22-1.el7.x86_64.rpm mysql-connector-python-8.0.11-1.el7.x86_64.rpm mysql-5722.tar.gz mysql-community-libs-5.7.22-1.el
Linux（CentOS7）离线安装mysql
lida776537387的博客
03-05 2273
The article summary 安装依赖库 libaio-0.3.109-13.el7.x86_64.rpm libao-1.1.0-8.el7.x86_64.rpm wget http://mirror.centos.org/centos/7/os/x86_64/Packages/libaio-devel-0.3.109-13.el7.x86_64.rpm wget http://mirror.centos.org/centos/7/os/x86_64/Packages/libao-1.1.0
Centos离线搭建Mysql完整过程，图文详解
mini小新的博客
11-02 5195
Centos离线搭建Mysql完整过程，图文详解1、准备安装包1、libaio安装包2、mysql安装包2、传输安装包3、解压安装包4、安装流程1、安装libaio包2、创建用户组mysql3、创建配置文件4、初始化数据库5、查看初始密码6、配置快捷启动7、启动服务5、修改默认密码6、开放远程连接7、添加系统路径（环境变量）8、设置开机启动9、测试连接 1、准备安装包 1、libaio安装包 下载地址： http://mirror.centos.org/centos/7/os/x86_64/Packages
ORACLE 安装提示缺少依赖包
热门推荐
攻城专栏
12-07 3万+
安装ORALCE　在做检验时提示缺少依赖包，其实是因为系统是64位系统而这些包都是32位的， This is a prerequisite condition to test whether the package "libaio-0.3.105" is available on the system This is a prerequisite condition to test w
离线安装MySQL缺少libaio.so.1文件——并离线安装libaio.so.1
itwxming的博客
10-22 2万+
离线安装MySQL初始化数据时报错：error while loading shared libraries: libaio.so.1 这是因为服务器缺少libaio.so.1文件 解决方法： 1，安装mysql之前检查下libaio.so.1的位置 # whereis libaio.so.1 libaio.so: /usr/lib64/libaio.so.1 2，如果执行了whereis libaio.so.1，没有找到该文件，就要手动安装下libaio yum install
libaio-0.3.105-2.x86_64.rpm 下载
最新发布
05-25
抱歉，由于我是一个纯文本AI语言模型，无法提供直接的文件下载服务。你可以通过以下步骤下载libaio-0.3.105-2.x86_64.rpm： 1. 打开网站 https://rpmfind.net/ 2. 在搜索框中输入 "libaio-0.3.105-2.x86_64.rpm" 并点击搜索按钮。 3. 在搜索结果中找到适合你的下载链接并下载。 4. 下载完成后，使用适当的命令安装软件包。例如，在CentOS或Red Hat上，你可以使用以下命令安装软件包： ``` sudo yum install libaio-0.3.105-2.x86_64.rpm ``` 希望这可以帮到你。
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值