windows下安装redis3.2.100单机和集群详解

 

下载redis

下载地址：https://github.com/MicrosoftArchive/redis/releases

我下载的是3.2.100版本的Redis-x64-3.2.100.zip，解压后放到某个目录，比如：D:\Program Files\redis

 

在此目录下增加三个文件夹：single、cluster、log

Single:存放单机模式的配置文件

Cluster:集群模式下的配置文件等信息

log：存放日志文件

 

单机模式

 

在single文件夹下增加配置文件redis.conf，内容如下：

bind 127.0.0.1
port 7001 
loglevel verbose   
logfile "D:/Program Files/redis/log/logredis7001_log.txt"
appendonly yes 
appendfilename "appendonly.7001.aof" 
cluster-enabled no 

其中cluster-enabled=no表示不启用集群，即单机模式。。port为端口号。

 

在single文件夹下增加一个启动文件start.bat，内容如下：

@echo off
cd D:\Program Files\redis\Redis-x64-3.2.100
D:
start redis-server ../single/redis.conf

双击start.bat开启单机的redis。。

使用netstat -aon|findstr 端口号  查看端口被哪个进程占用

tasklist|findstr 进程号查看进程被哪个程序占用

 

 

集群模式

增加配置

在cluster文件夹下增加1个配置文件redis.7001.conf.内容如下。然后复制此文件5份，将内容中的7001部分改为7002、7003、7004、7005、7006

至此，我们增加了6个配置文件。

bind 127.0.0.1
port 7001  
loglevel verbose    
logfile "D:/Program Files/redis/log/logredis7001_log.txt" 
appendonly yes  
appendfilename "appendonly.7001.aof"  
cluster-enabled yes  
cluster-config-file nodes-7001.conf  
cluster-node-timeout 15000  
cluster-slave-validity-factor 10  
cluster-migration-barrier 1  
cluster-require-full-coverage yes 

 

图片出自http://www.cnblogs.com/xckk/p/6144447.html

 

增加启动脚本start.bat，内容如下：

@echo off
cd D:\Program Files\redis\Redis-x64-3.2.100
D:
start redis-server ../cluster/redis.7001.conf
start redis-server ../cluster/redis.7002.conf
start redis-server ../cluster/redis.7003.conf
start redis-server ../cluster/redis.7004.conf
start redis-server ../cluster/redis.7005.conf
start redis-server ../cluster/redis.7006.conf

 

启动6个redis实例

双击start.bat启动6个redis实例，会看到6个窗口。可以查看log目录的日志确认是否启动成功

目前这6个实例都起了，但是是相对独立了，还不是集群。。还需要后面的步骤。。

 

安装ruby

下载地址http://dl.bintray.com/oneclick/rubyinstaller/。我下载的rubyinstaller-2.3.3.exe。

。

 

 下载后双击安装。。注意勾选

 

 

安装Redis的Ruby库

打开ruby客户端：

 

执行命令gem install redis

 

C:\WINDOWS\system32>gem install redis
Fetching: redis-4.0.1.gem (100%)
Successfully installed redis-4.0.1
Parsing documentation for redis-4.0.1
Installing ri documentation for redis-4.0.1
Done installing documentation for redis after 2 seconds
1 gem installed

 

 

下载集群脚本redis-trib

  下载地址   https://raw.githubusercontent.com/antirez/redis/unstable/src/redis-trib.rb

拷贝到某个文件夹，比如D:\Program Files\redis\cluster下

 

 

启动集群

打开命令窗口，执行命令

ruby redis-trib.rb create --replicas 1 127.0.0.1:7001 127.0.0.1:7002 127.0.0.1:7003 127.0.0.1:7004 127.0.0.1:7005 127.0.0.1:7006

 

D:\Program Files\redis\run>ruby redis-trib.rb create --replicas 1 127.0.0.1:7001 127.0.0.1:7002 127.0.0.1:7003 127.0.0.1:7004 127.0.0.1:7005 127.0.0.1:7006
>>> Creating cluster
>>> Performing hash slots allocation on 6 nodes...
Using 3 masters:
127.0.0.1:7001
127.0.0.1:7002
127.0.0.1:7003
Adding replica 127.0.0.1:7004 to 127.0.0.1:7001
Adding replica 127.0.0.1:7005 to 127.0.0.1:7002
Adding replica 127.0.0.1:7006 to 127.0.0.1:7003
M: 72a6b973a34ec0ca414ac480fdca1124cebd3717 127.0.0.1:7001
   slots:0-5460 (5461 slots) master
M: 7167e439fc6d545821d27f06efbcc9c2adc8c784 127.0.0.1:7002
   slots:5461-10922 (5462 slots) master
M: fee1f5f1f19bc2c459895d97d4a5e30524d288bb 127.0.0.1:7003
   slots:10923-16383 (5461 slots) master
S: 760fb1d95f36535ebb6295c1159760c19812d311 127.0.0.1:7004
   replicates 72a6b973a34ec0ca414ac480fdca1124cebd3717
S: 27f0f3bf2482b8cc9425b82947e5d1fe75f26c73 127.0.0.1:7005
   replicates 7167e439fc6d545821d27f06efbcc9c2adc8c784
S: 0cadc0d954614c3bec7881661c727312ddd7f88e 127.0.0.1:7006
   replicates fee1f5f1f19bc2c459895d97d4a5e30524d288bb
Can I set the above configuration? (type 'yes' to accept): yes
>>> Nodes configuration updated
>>> Assign a different config epoch to each node
>>> Sending CLUSTER MEET messages to join the cluster
Waiting for the cluster to join......
>>> Performing Cluster Check (using node 127.0.0.1:7001)
M: 72a6b973a34ec0ca414ac480fdca1124cebd3717 127.0.0.1:7001
   slots:0-5460 (5461 slots) master
M: 7167e439fc6d545821d27f06efbcc9c2adc8c784 127.0.0.1:7002
   slots:5461-10922 (5462 slots) master
M: fee1f5f1f19bc2c459895d97d4a5e30524d288bb 127.0.0.1:7003
   slots:10923-16383 (5461 slots) master
M: 760fb1d95f36535ebb6295c1159760c19812d311 127.0.0.1:7004
   slots: (0 slots) master
   replicates 72a6b973a34ec0ca414ac480fdca1124cebd3717
M: 27f0f3bf2482b8cc9425b82947e5d1fe75f26c73 127.0.0.1:7005
   slots: (0 slots) master
   replicates 7167e439fc6d545821d27f06efbcc9c2adc8c784
M: 0cadc0d954614c3bec7881661c727312ddd7f88e 127.0.0.1:7006
   slots: (0 slots) master
   replicates fee1f5f1f19bc2c459895d97d4a5e30524d288bb
[OK] All nodes agree about slots configuration.
>>> Check for open slots...
>>> Check slots coverage...
[OK] All 16384 slots covered.

根据运行结果可见前三个端口是主，后面三个是从。

 

 

可能会发现报错：

[136] 26 Jan 11:58:58.721 # Creating Server TCP listening socket *:7001: listen: Unknown error

[16656] 26 Jan 12:00:18.728 # Creating Server TCP listening socket *:7001: listen: Unknown error

这个报错需要在配置文件里加上

bind 127.0.0.1

 

参考文档

http://blog.csdn.net/yys79/article/details/51566417

http://blog.csdn.net/qiuyufeng/article/details/70474001

 http://www.cnblogs.com/xckk/p/6144447.html

Linux安装可参考：

http://blog.csdn.net/chen8238065/article/details/52318635

http://www.cnblogs.com/cxzdy/p/5132108.html

http://www.cnblogs.com/xckk/p/6144447.html

转载于:https://www.cnblogs.com/codeya/p/windows_redis_3_single_cluster.html