OSPF vlink

R1上配置

interface GigabitEthernet0/0/0
 undo shutdown
 ip address 172.16.1.1 255.255.255.0
#
interface NULL0
#
interface LoopBack0
 ip address 1.1.1.1 255.255.255.255
#
ospf 1 router-id 1.1.1.1
 area 0.0.0.0                            
  network 1.1.1.1 0.0.0.0
 area 0.0.0.1
  network 172.16.1.0 0.0.0.255
 vlink-peer 3.3.3.3

R2上配置

interface GigabitEthernet0/0/0
 undo shutdown
 ip address 172.16.1.2 255.255.255.0
#
interface GigabitEthernet0/0/1
 undo shutdown
 ip address 192.168.1.1 255.255.255.0
#
interface NULL0
#
interface LoopBack0                      
 ip address 2.2.2.2 255.255.255.255
#
ospf 1 router-id 2.2.2.2
 area 0.0.0.1
  network 172.16.1.0 0.0.0.255
  network 192.168.1.0 0.0.0.255
#

R3上配置

interface GigabitEthernet0/0/0
 undo shutdown
 ip address 192.168.1.2 255.255.255.0
#
interface NULL0
#
interface LoopBack0
 ip address 3.3.3.3 255.255.255.255
#
ospf 1 router-id 3.3.3.3
 area 0.0.0.1                            
  network 192.168.1.0 0.0.0.255
 vlink-peer 1.1.1.1
 area 0.0.0.2
  network 3.3.3.3 0.0.0.0
#

 

结果

R1

[R1]display ospf vlink

         OSPF Process 1 with Router ID 1.1.1.1
                 Virtual Links

 Virtual-link Neighbor-id  -> 3.3.3.3, Neighbor-State: Full

 Interface: 172.16.1.1 (GigabitEthernet0/0/0)
 Cost: 2  State: P-2-P  Type: Virtual
 Transit Area: 0.0.0.1
 Timers: Hello 10 , Dead 40 , Retransmit 5 , Transmit Delay 1
 GR State: Normal 
 
[R1]display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
        Destinations : 7        Routes : 7

Destination/Mask    Proto  Pre  Cost       Flags NextHop         Interface

        1.1.1.1/32  Direct 0    0            D   127.0.0.1       InLoopBack0
        3.3.3.3/32  OSPF   10   2            D   172.16.1.2      GigabitEthernet0/0/0
      127.0.0.0/8   Direct 0    0            D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct 0    0            D   127.0.0.1       InLoopBack0
     172.16.1.0/24  Direct 0    0            D   172.16.1.1      GigabitEthernet0/0/0
     172.16.1.1/32  Direct 0    0            D   127.0.0.1       InLoopBack0
    192.168.1.0/24  OSPF   10   2            D   172.16.1.2      GigabitEthernet0/0/0

R3

[R3]display ospf vlink

         OSPF Process 1 with Router ID 3.3.3.3
                 Virtual Links

 Virtual-link Neighbor-id  -> 1.1.1.1, Neighbor-State: Full

 Interface: 192.168.1.2 (GigabitEthernet0/0/0)
 Cost: 2  State: P-2-P  Type: Virtual
 Transit Area: 0.0.0.1
 Timers: Hello 10 , Dead 40 , Retransmit 5 , Transmit Delay 1
 GR State: Normal 
 
[R3]display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
        Destinations : 7        Routes : 7

Destination/Mask    Proto  Pre  Cost       Flags NextHop         Interface

        1.1.1.1/32  OSPF   10   2            D   192.168.1.1     GigabitEthernet0/0/0
        3.3.3.3/32  Direct 0    0            D   127.0.0.1       InLoopBack0
      127.0.0.0/8   Direct 0    0            D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct 0    0            D   127.0.0.1       InLoopBack0
     172.16.1.0/24  OSPF   10   2            D   192.168.1.1     GigabitEthernet0/0/0
    192.168.1.0/24  Direct 0    0            D   192.168.1.2     GigabitEthernet0/0/0
    192.168.1.2/32  Direct 0    0            D   127.0.0.1       InLoopBack0

 

转载于:https://www.cnblogs.com/houzhiqing/archive/2012/05/11/5289437.html