New Innovation of Hongxing PF Crusher Machines

Vertical shaft impact machine for sale

Hongxing PF crusher machines are innovation, it isn’t a copy of any other make machine. The main principle is Vertical Shaft that is typical in other make machines. The Style with the Rotor, Anvil sectors, the material utilised is entirely distinctive than any other make. Our machine is very effective in operation. The wear out parts can not be the only criteria to compare any two make machines. Some other items also should be deemed.

The efficiency from the machine, Power required per ton of crushing, overall life of the bearings, and also other parts, common breakdown, and time required for it is maintenance, Cost of wear parts, and replacement time, day-to-day lubrication expense and time necessary for the same ought to also be considered. The Total Manufacturing Expense of Crushing is Explained in Details. Here with we will cover all of the points for your reference.

Due to special floating design in the bearing in a Capsule, the wastage of power in friction loss is reduced to a minimum. The ejection angle in the particles from the Rotor is also a vital thing which reduces the power loss in friction with the sides from the rotor. Appropriate angle of ejection and it’s striking on anvil sectors or on other stone particles is also extremely significant for giving much more production per unit in the Electrical Power. Our machine calls for two,26 KWH to two.5 KWH for crushing per ton of stone, where as other make demands two.7 KWH to two.86 KWH for similar model with the machine. Which gives minimum net saving of 12 % in power. Power charges for Crusher is about Rs 2.25 per ton.

Life of the bearings in our machine is not much less than 10,000 operating hours or perhaps more. This really is a estimated life. Immediately after running of about 2500 hours we have checked the bearings condition, and found them as new as they were fitted with out any mark of wearing. (Style of the bearing is given by SKF Bearing Co style department and they have estimated considerably much more. But on safer side we tell considerably less, We have fitted nevertheless heavier bearing than their recommendation ) . Bearings in our machines are only of SKF make, Ideal accessible in the marketplace. As per our watch on other make machines the common failure of the bearings is much greater, and a lot more regularly needs to adjust the bearings. Forced oil lubrication, in our machine provides the floating in the total vertical load, and provides best lubrication film on the bearing surface. Specially developed and manufactured Vee seals and oil seal provides really long life.

V.S.I crusher design

The primary shaft of our machine is created from special steel, and no failure or breaking is recorded. The fitment in the shaft is also special, and isn’t directly connected for the bearings. Shock load if any, as a result of any reason is soaked by the shaft it self and pretty less chances for it’s transfer for the bearings. Wear parts are the main factor for the economical running with the machines. All other make use tip plates, In our Rotors it’s Round Diverting Bush, Which gives 4 occasions life than tip plates, cost may be two and half occasions. The key portion from the shoe is having stone lining so no wear expense. Only strategies bush are subject to wear.

A incredibly unique design of anvil sectors, particularly for Rotopactor utilizes the residual power with the particles and makes the edges rounded and gives fantastic surface texture Thanks to rolling and rubbing action. A cascade flow is also maintained, as well as the stone coming out of the rotor strikes these particles and breaks once again, thus reduces the wear in the anvil, and outcomes in full utilization in the energy. Fitting of these sectors is also pretty simple and those are self locked. No additional locking ring is necessary, Thus reduces the weight though changing, No Vaulted Anvil ring or Stob Anvil Ring is required to fit the sectors. Additional over our anvil sectors are reversible, so might be made use of twice by putting upside down.

As the professional manufacturer of complete sets of mining machinery, such as mobile crushers, Aggregate jaw crusher,Impact stone crusher, Rock crushing plant, Henan Hongxing is always doing the best in products and service.

转载于:https://www.cnblogs.com/liajones/archive/2012/02/16/2354456.html