html5播放sd卡音乐程序,51单片机的音乐播放器源码（插SD卡）

#include <12c56.H>

#define uint8 unsigned char

#define uint16 unsigned int

#define uint32 unsigned long

sbit SDCS = P1^4;

sbit LAST = P3^3;

sbit NEXT = P3^4;

sbit STOP = P2^5;

uint32 played;

volatile uint32 start_offset;

volatile uint16 tptr=0,bdat=0;

// 播放    插卡 曲目  立体声

bit PLAY=0, CK=1  ,QM=0, STEREO=1;

xdata uint8 buf0[512];

void delay(uint16 dly)

{

uint16 i;

uint8  j;

for(i=0;i

for(j=0;j<10;j++)

;

}

void T1ISR() interrupt 3

{

static uint8 x=0;

if(!PLAY)

{

x++;

if(x==4)x=0;

if(!x)

{

if(CK)

{

if(tptr==1920)

{

tptr=0;

TR1=0;

}

else

tptr++;

}

else if(QM)

{

if(tptr==1376)

{

tptr=0;

TR1=0;

}

else

tptr++;

}

else

{

ISP_ADDRH=(tptr>>8)&0xFF;

ISP_ADDRL=(tptr   )&0xFF;

ISP_CONTR=0x80;

ISP_CMD=1;

ISP_TRIG=0x46;

ISP_TRIG=0xB9;

tptr++;

if(tptr==0x0480)TR1=0; //容量

if(tptr==0x0780)TR1=0; //0

if(tptr==0x0a80)TR1=0; //1

if(tptr==0x0d80)TR1=0; //2

if(tptr==0x1080)TR1=0; //3

if(tptr==0x1380)TR1=0; //4

if(tptr==0x1680)TR1=0; //5

if(tptr==0x1980)TR1=0; //6

if(tptr==0x1c80)TR1=0; //7

if(tptr==0x1f80)TR1=0; //8

if(tptr==0x2280)TR1=0; //9

if(tptr==0x2580)TR1=0; //千

if(tptr==0x2880)TR1=0; //百

if(tptr==0x2b80)TR1=0; //十

if(tptr==0x2e80)TR1=0; //兆

}

}

else

{

;

}

}

else

{

CCAP0H=buf0[tptr++];

bdat--;

if(STEREO)

{

CCAP1H=buf0[tptr++];

bdat--;

}

else

{

CCAP1H=CCAP0H;

}

if(tptr>=512)

{

tptr=0;

}

}

}

void SPI_INIT()

{

SPCTL=0xd0;

}

void SPI_INIT_LOW()

{

SPCTL=0xd1;

}

uint8  SPI_COMM(uint8 dat)

{

SDCS=0;

SPDAT=dat;

while((SPSTAT&0x80)==0);

SPSTAT=0x80;

SDCS=1;

return(SPDAT);

}

uint8 SD_SendCommand(uint8 cmd, uint32 arg)

{

uint8 r1;

uint8 retry=0;

SPI_COMM(0xff);

SDCS=0;

SPI_COMM(cmd | 0x40);//分别写入命令 //send command

SPI_COMM(arg>>24);

SPI_COMM(arg>>16);

SPI_COMM(arg>>8);

SPI_COMM(arg);

SPI_COMM(0x95);

while((r1 = SPI_COMM(0xff)) == 0xff)//等待响应， //wait response

if(retry++ > 20) break;//超时退出     //time out error

SDCS=1;

return r1;//返回状态值     //return state

}

uint8  InitSD()

{

uint8 tmp,ret;

for(tmp=0;tmp<0x0f;tmp++)

SPI_COMM(0xff);

SDCS=0;

SPI_COMM(0x40);

SPI_COMM(0x00);

SPI_COMM(0x00);

SPI_COMM(0x00);

SPI_COMM(0x00);

SPI_COMM(0x95);

for(tmp=0;tmp<0x7f;tmp++)

{

ret=SPI_COMM(0xff);

if(ret==0x01)

{

uint8 retry=0,r1;

do

{

r1 = SD_SendCommand(1, 0);//发active命令 //send active command

retry++;

if(retry>100) return 1;//超时退出  //time out

} while(r1);

//SPI_High();

r1 = SD_SendCommand(59, 0);//关crc  //disable CRC

r1 = SD_SendCommand(16, 512);//设扇区大小512 //set sector size to 512

return 0;

}

}

SDCS=1;

return 1;

}

//读一个扇区  //read one sector

uint8 SD_ReadSector(uint32 sector, uint8* buffer)

{

uint8 r1;

uint16 i;

uint16 retry=0;

r1 = SD_SendCommand(17, (start_offset+sector)<<9);//读命令 //read command

if(r1 != 0x00)

return r1;

SDCS=0;

//等数据的开始 //wait to start recieve data

while(SPI_COMM(0xff) != 0xfe)

if(retry++ > 1000)

{

SDCS=1;

return 1;

}

for(i=0; i<512; i++)//读512个数据

{

bdat++;

while(bdat>=512);

*buffer++ = SPI_COMM(0xff);

}

SPI_COMM(0xff);//伪crc

SPI_COMM(0xff);

SDCS=1;

return 0;

}

void TIMER0_INIT()

{

TMOD=0x22;

TH0=TL0=0xFF;

TR0=1;

ET0=0;

}

void TIMER1_INIT(uint16 hz)

{

if(hz>=8000)

{

CLK_DIV=0x00;

TH1=TL1=(uint8)(256-((uint32)1040000/hz));//0x7e;

}

else

{

CLK_DIV=0x02;

TH1=TL1=(uint8)(256-((uint32)260000/hz));//0x7e;

}

TR1=0;

EA=1;

ET1=1;

}

void CCP_INIT()

{

AUXR|=0x80;

CMOD=0x04;

CL=0x00;

CH=0x00;

CCAP0L=0x80;

CCAP0H=0x80;

CCAPM0=0x42;

CCAP1L=0x80;

CCAP1H=0x80;

CCAPM1=0x42;

CR=1;

}

void main()//主函数

{

uint8 i=0;

uint32 ptr;

uint8  FATs;

uint16 BytesPerSector;

uint8  SectorsPerClust;

uint8  FirstFATSector;

uint16 RootDirCount;

uint16 RootDirSectors;

uint16 FirstDirSector;

uint16 FirstDataSector;

uint32 samps;

uint8  sbits;

uint32 filelen;

uint16 sPtr=0,iPtr=0;

uint8  currTrack=0,Track=1;

//------ 3.3V I/O口配置 -------

P1M0=P1M1=0xf0; //P1.7-P1.4开漏

//-----------------------------

TIMER0_INIT();

CCP_INIT();

IT0=1;

EX0=1;

RESTART:

Track=0;

TR1=0;

CK=1;

tptr=0;

PLAY=0;

TIMER1_INIT(8000);

TR1=1;

while(TR1);

CK=0;

SPI_INIT_LOW();

while(1)

{

if(!InitSD())break;

}

SPI_INIT();

delay(1000);

tptr=0;

TR1=1;

while(TR1);

TR1=1;

while(TR1);

delay(5000);

goto read;

LASTTRACK:

TR1=0;

PLAY=0;

start_offset=0;

currTrack=0;

Track--;

goto read;

NEXTTRACK:

TR1=0;

PLAY=0;

start_offset=0;

currTrack=0;

Track++;

read:

while(1)

{

//FAT16文件系统处理

//判断引导扇区有效性

bdat=65535;

if(!SD_ReadSector(0,buf0))

{

if((buf0[0]!=0xeb)||(buf0[1]!=0x3c)||(buf0[2]!=0x90)) //如果不是EB 3C 90说明有分区表，继续读取之，否则直接开始播放

{

start_offset=(buf0[0x01c6]<<0)|(buf0[0x01c7]<<8)|(buf0[0x01c8]<<16)|(buf0[0x01c9]<<24);

bdat=65535;

SD_ReadSector(0,buf0);

}

if((buf0[510]==0x55)&&(buf0[511]==0xaa))

{

;

}

else

{

goto RESTART;

}

}

else

{

goto RESTART;

}

//读FAT表信息

FATs=buf0[0x10];

BytesPerSector=buf0[0x0B]|(buf0[0x0C]<<8);

SectorsPerClust=buf0[0x0D];

FirstFATSector=buf0[0x0E];

RootDirCount=buf0[0x11]|(buf0[0x12]<<8);

RootDirSectors = (RootDirCount>>4);//根目录占用的扇区数

FirstDirSector=FirstFATSector+FATs*(buf0[0x16]|(buf0[0x17]<<8));

FirstDataSector = FirstDirSector+RootDirSectors;//第一个数据扇区

//搜索WAV文件

for(sPtr=0;sPtr

{

bdat=65535; //-1(允许读卡一次读完512字节)

SD_ReadSector(FirstDirSector+sPtr,buf0);

for(iPtr=0;iPtr<512;iPtr+=32)

{

if((buf0[iPtr]!='.')&&(buf0[iPtr]!=0x00)&&(buf0[iPtr]!=0xe5) & (buf0[iPtr+0x0B]!=0x0f))

if((buf0[iPtr+0x08]=='W')&&(buf0[iPtr+0x09]=='A')&&(buf0[iPtr+0x0a]=='V'))

{

ptr=(uint32)FirstDataSector+(uint32)SectorsPerClust*((buf0[iPtr+0x1A]|(buf0[iPtr+0x1B]<<8))-2);

filelen=(((uint32)buf0[iPtr+0x1c]|(((uint32)buf0[iPtr+0x1d])<<8)|(((uint32)buf0[iPtr+0x1e])<<16)|((uint32)(buf0[iPtr+0x1f])<<24))/512)-2;

currTrack++;

if(currTrack==Track)break;

}

}

if(currTrack==Track)break;

}

if(currTrack!=Track)

{

Track=0;

goto NEXTTRACK;

}

bdat=65535;

SD_ReadSector(ptr++,buf0);

samps=(buf0[0x18]|(buf0[0x19]<<8)|(buf0[0x1A]<<16)|(buf0[0x1B]<<24));

sbits=buf0[0x22];

if(buf0[0x16]==2)

STEREO=1;

else

STEREO=0;

if(sbits!=8)

{

goto NEXTTRACK;

}

if(samps>48000)

{

goto NEXTTRACK;

}

TIMER1_INIT(8000);

QM=1;

tptr=0;

TR1=1;

while(TR1);

QM=0;

TIMER1_INIT(samps/2);//(24000);

bdat=65535;

SD_ReadSector(ptr++,buf0);

tptr=0;

played=0;

PLAY=1;

TR1=1;

while(1)

{

if(SD_ReadSector(ptr++,buf0))goto RESTART;

if(!LAST)goto LASTTRACK;

if(!NEXT)goto NEXTTRACK;

if(!STOP)PCON=PCON^0xfe;

if((played++)>filelen)goto NEXTTRACK;

}

}

}

void exint0() interrupt 0

{

;

}