嵌入式linux调节lcd背光,嵌入式Linux之我行——LCD背光驱动在2440上的实例开发

#include

#include

#include

#include

#include

#include

#include

#include

#include

#include

#include

#include

#include

#include

#include

#include

#include

#define DEVICE_NAME "backlight" //设备名称

#define DEVICE_MINOR 5 //次设备号，这里我们将设备注册为misc设备，这种设备的主设备号都为10

static int my2440_backlight_ioctl(struct inode *inode,

struct file *file,

unsigned int cmd,

unsigned long arg)

{

switch(cmd)

{

case 0:

//当接收的命令为0时，就将GPG4引脚设为低电平，关闭背光

s3c2410_gpio_setpin(S3C2410_GPG4, 0);

printk(DEVICE_NAME " turn off!\n");

return 0;

case 1:

//当接收的命令为1时，就将GPG4引脚设为高电平，开启背光

s3c2410_gpio_setpin(S3C2410_GPG4, 1);

printk(DEVICE_NAME " turn on!\n");

return 0;

default:

return -EINVAL;

}

}

static struct file_operations dev_fops =

{

.owner = THIS_MODULE,

.ioctl = my2440_backlight_ioctl, //这里只使用控制IO口的方式来控制背光

};

static struct miscdevice misc =

{

.minor = DEVICE_MINOR,

.name = DEVICE_NAME,

.fops = &dev_fops,

};

static int __init dev_init(void)

{

int ret;

ret = misc_register(&misc); //注册成misc设备

if(ret < 0)

{

printk("Register misc device fiald!");

return ret;

}

//将GPG4口配置成输出口

s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_OUTP);

return ret;

}

static void __exit dev_exit(void)

{

misc_deregister(&misc); //注销该misc设备

}

module_init(dev_init);

module_exit(dev_exit);

MODULE_LICENSE("GPL");

MODULE_AUTHOR("Huang Gang");

MODULE_DEION("Backlight control for my2440");