linux6.5多路径单独安装,51CTO下载-linux5、linux6下多路径multipath配置

直接在/etc/multipath.conf文件中贴如下列参数即可(自行修改设备ID即wwid)

=====================================================================================

# This is a basic configuration file with some examples, for device mapper

# multipath.

# For a complete list of the default configuration values, see

# /usr/share/doc/device-mapper-multipath-0.4.7/multipath.conf.defaults

# For a list of configuration options with descriptions, see

# /usr/share/doc/device-mapper-multipath-0.4.7/multipath.conf.annotated

# Blacklist all devices by default. Remove this to enable multipathing

# on the default devices.

blacklist {

# devnode "*"

}

## By default, devices with vendor = "IBM" and product = "S/390.*" are

## blacklisted. To enable mulitpathing on these devies, uncomment the

## following lines.

#blacklist_exceptions {

#device {

# vendor"IBM"

# product"S/390.*"

#}

#}

## Use user friendly names, instead of using WWIDs as names.

defaults {

user_friendly_names yes

}

##

## Here is an example of how to configure some standard options.

##

#

defaults {

udev_dir /dev

polling_interval 10

selector "round-robin 0"

path_grouping_policymultibus

getuid_callout "/sbin/scsi_id -g -u -s /block/%n"

prio_callout /bin/true

path_checker readsector0

rr_min_io 100

max_fds 8192

rr_weight priorities

failback immediate

no_path_retry fail

user_friendly_namesyes

}

##

## The wwid line in the following blacklist section is shown as an example

## of how to blacklist devices by wwid. The 2 devnode lines are the

## compiled in default blacklist. If you want to blacklist entire types

## of devices, such as all scsi devices, you should use a devnode line.

## However, if you want to blacklist specific devices, you should use

## a wwid line. Since there is no guarantee that a specific device will

## not change names on reboot (from /dev/sda to /dev/sdb for example)

## devnode lines are not recommended for blacklisting specific devices.

##

#blacklist {

# wwid 26353900f02796769

#devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"

#devnode "^hd[a-z]"

#}

#multipaths {

#multipath {

# wwid 3600508b4000156d700012000000b0000

# alias yellow

# path_grouping_policymultibus

# path_checker readsector0

# path_selector "round-robin 0"

# failback manual

# rr_weight priorities

# no_path_retry 5

#}

#multipath {

# wwid 1DEC_____321816758474

# alias red

#}

#}

#devices {

#device {

# vendor "COMPAQ "

# product "HSV110 (C)COMPAQ"

# path_grouping_policymultibus

# getuid_callout "/sbin/scsi_id -g -u -s /block/%n"

# path_checker readsector0

# path_selector "round-robin 0"

# hardware_handler"0"

# failback 15

# rr_weight priorities

# no_path_retry queue

#}

#device {

# vendor "COMPAQ "

# product "MSA1000 "

# path_grouping_policymultibus

#}

#}

#edit by yunkai

multipaths {

multipath {

wwid 36005076303ffd42f0000000000002006

ali

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值