嵌入式 linux ramdisk 保存文件,嵌入式Linux Ramdisk文件系统制作(u-boot, busybox)-CSDN博客

CODE:

=> tftp 800000 uImage; tftp a00000 rootfs.img; bootm 800000 a00000

Using FCC1 ETHERNET device

TFTP from server 192.168.0.102; our IP address is 192.168.0.20

Filename 'uImage'.

Load address: 0x800000

Loading: #################################################################

#################################################################

###########################################

done

Bytes transferred = 1880231 (1cb0a7 hex)

Using FCC1 ETHERNET device

TFTP from server 192.168.0.102; our IP address is 192.168.0.20

Filename 'rootfs.img'.

Load address: 0xa00000

Loading: #################################################################

#################################################################

###################################

done

Bytes transferred = 3170368 (306040 hex)

## Booting image at 00800000 ...

Image Name: Linux-2.6.11

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 1880167 Bytes = 1.8 MB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

## cmdline at 0x007FFF00 ... 0x007FFF14

memstart = 0x00000000

memsize = 0x08000000

flashstart = 0xFE000000

flashsize = 0x01000000

flashoffset = 0x00033000

sramstart = 0x00000000

sramsize = 0x00000000

immr_base = 0xF0000000

bootflags = 0x00000001

vco = 400 MHz

sccfreq = 100 MHz

brgfreq = 100 MHz

intfreq = 400 MHz

cpmfreq = 200 MHz

busfreq = 100 MHz

ethaddr = 00:08:02:06:10:00

IP addr = 192.168.0.20

baudrate = 115200 bps

## Loading RAMDisk Image at 00a00000 ...

Image Name:

Image Type: PowerPC Linux RAMDisk Image (uncompressed)

Data Size: 3170304 Bytes = 3 MB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Loading Ramdisk to 07880000, end 07b86000 ... OK

Linux version 2.6.11 (root@Embedded001) (gcc version 3.4.3) #1 Fri Sep 26 11:08:35 CST 2008

Motorola PQ2 ADS PowerPC port

arch/ppc/syslib/m82xx_pci.c: The PCI bus is 33333333 Mhz.

Waiting 1 second after deasserting RST...

Built 1 zonelists

Kernel command line: console=ttyS0,115200

PID hash table entries: 1024 (order: 10, 16384 bytes)

Warning: real time clock seems stuck!

Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Memory: 122272k available (2660k kernel code, 1524k data, 116k init, 0k highmem)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd

Freeing initrd memory: 3096k freed

NET: Registered protocol family 16

PCI: Probing PCI hardware

dev = 0, pin = 1

slot = 0, dev = 0, pin = 1

dev = a0, pin = 1

slot = 20, dev = a0, pin = 1

dev = b8, pin = 1

slot = 23, dev = b8, pin = 1

dev = b9, pin = 1

slot = 23, dev = b9, pin = 1

PCI: Cannot allocate resource region 0 of device 0000:00:00.0

PCI: Cannot allocate resource region 1 of device 0000:00:00.0

SCSI subsystem initialized

devfs: 2004-01-31 Richard Gooch ([email]rgooch@atnf.csiro.au[/email])

devfs: boot_options: 0x1

Initializing Cryptographic API

Serial: CPM driver $Revision: 0.01 $

ttyS0 at MMIO 0xf0011a80 (irq = 4) is a CPM UART

ttyS1 at MMIO 0xf0011a00 (irq = 40) is a CPM UART

ttyS2 at MMIO 0xf0011a60 (irq = 43) is a CPM UART

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered

RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize

loop: loaded (max 8 devices)

nbd: registered device at major 43

Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2

e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI

ipddp.c:v0.01 8/28/97 Bradford W. Johnson

ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson

i2c /dev entries driver

eth0: FCC ENET Version 0.3, 00:08:02:86:10:00

eth1: FCC ENET Version 0.3, 00:08:02:46:10:00

NET: Registered protocol family 26

NET: Registered protocol family 2

IP: routing cache hash table of 1024 buckets, 8Kbytes

TCP established hash table entries: 8192 (order: 4, 65536 bytes)

TCP bind hash table entries: 8192 (order: 3, 32768 bytes)

TCP: Hash tables configured (established 8192 bind 8192)

IPv4 over IPv4 tunneling driver

GRE over IPv4 tunneling driver

ip_conntrack version 2.1 (1024 buckets, 8192 max) - 248 bytes per conntrack

ipt_recent v0.3.1: Stephen Frost . [url][/url]

ClusterIP Version 0.6 loaded successfully

IPVS: Registered protocols (TCP, UDP, AH, ESP)

IPVS: Connection hash table configured (size=4096, memory=32Kbytes)

IPVS: ipvs loaded.

IPVS: [rr] scheduler registered.

IPVS: [wrr] scheduler registered.

IPVS: [lc] scheduler registered.

IPVS: [wlc] scheduler registered.

IPVS: [lblc] scheduler registered.

IPVS: [lblcr] scheduler registered.

IPVS: [dh] scheduler registered.

IPVS: [sh] scheduler registered.

IPVS: [sed] scheduler registered.

IPVS: [nq] scheduler registered.

Initializing IPsec netlink socket

NET: Registered protocol family 1

NET: Registered protocol family 17

NET: Registered protocol family 15

Bridge firewalling registered

Ebtables v2.0 registered

NET: Registered protocol family 4

NET: Registered protocol family 5

NET: Registered protocol family 9

X.25 for Linux. Version 0.2 for Linux 2.1.15

NET: Registered protocol family 8

NET: Registered protocol family 20

lec.c: Sep 26 2008 11:07:03 initialized

mpoa: /proc/mpoa initialized

mpc.c: Sep 26 2008 11:07:01 initialized

DECnet: Routing cache hash table of 1024 buckets, 8Kbytes

NET: Registered protocol family 12

NET: Registered protocol family 19

802.1Q VLAN Support v1.8 Ben Greear

All bugs added by David S. Miller

SCTP: Hash tables configured (established 4096 bind 8192)

RAMDISK: ext2 filesystem found at block 0

RAMDISK: Loading 3096KiB [1 disk] into ram disk... done.

VFS: Mounted root (ext2 filesystem) readonly.

Mounted devfs on /dev

init started: BusyBox v1.7.2 (2008-09-26 10:46:55 CST)

starting pid 810, tty '': '/etc/init.d/rcS'

mdev: /sys/block: No such file or directory

mdev: /sys/class: No such file or directory

starting pid 813, tty '': '/bin/sh'

Processing /etc/profile... Done