linux一键烧写,OK6410A学习笔记一：一键烧录Linux

最新推荐文章于 2024-05-23 09:42:07 发布

史文林

最新推荐文章于 2024-05-23 09:42:07 发布

阅读量438

点赞数

文章标签： linux一键烧写

去年5月份买的飞凌OK6410A开发板，但是一直没有怎么用，主要是自己懒，呵呵，都是废话

开发环境：

windows7 + vmware 6.5 + ubuntu 9.10

烧录步骤:

1)SD卡，格式化成FAT32格式，然后用SD_Write.exe将mmc.bin烧录进去。

windows7下要在管理员模式下运行SD_Write.exe，烧录mmc.bin之前要点击Format

2)把u-boot.bin,zImage,cramfs拷贝到SD卡中

OK6410A支持cramfs和yaffs2文件系统,前者为compressed ram file system,后者为yet another ffs，区别在于前者为只读文件系统，后者支持读写。yaffs2的读写特性可以方便地进行u-boot和linux的在线烧录和读写操作，这样极大地方便了开发。

3)将SD插入OK6410A开发板SD卡槽，将拨码开关调成SD卡启动(123-off,45678-on)

4)上电，通过DNW实时查看烧录反馈信息。注意，可能烧写不成功，极有可能是因为NAND Flash坏块的原因，这个不能说开发板质量差，而是现在NAND Flash的一个通病吧。处理方法是重新上电，在DNW中按空格键，在提示出输入nand scrub命令处理坏块，大部分坏块是不能修复的，这一步骤只不过是把坏块标记成不使用。最后，重新上电烧录linux系统。

5)断电，将拨码开关调成NAND Flash启动(12367-off,458-on)

OK，that's all.

启动信息：

U-Boot 1.1.6 (May 13 2011 - 16:11:02) for SMDK6410

****************************************

** u-boot 1.1.6 **

** Updated for TE6410 Board **

** Version 1.0 (10-01-15) **

** OEM: Forlinx Embedded **

****************************************

CPU: S3C6410 @532MHz

Fclk = 532MHz, Hclk = 133MHz, Pclk = 66MHz, Serial = CLKUART (SYNC Mode)

Board: SMDK6410

DRAM: 256 MB

Flash: 0 kB

NAND: select s3c_nand_oob_mlc_128

2048 MB

*** Warning - bad CRC or NAND, using default environment

In: serial

Out: serial

Err: serial

Hit any key to stop autoboot: 0

NAND read: device 0 offset 0x100000, size 0x500000

5242880 bytes read: OK

Boot with zImage

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

Linux version 3.0.1-svn140 (root@monkey-MS-7678) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #237 Wed Nov 2 10:51:04 CST 2011

camera: no parent clock specified

S3C64XX: PLL settings, A=532000000, M=532000000, E=24000000

S3C64XX: HCLK2=266000000, HCLK=133000000, PCLK=66500000

mout_apll: source is fout_apll (1), rate is 532000000

mout_epll: source is epll (1), rate is 24000000

mout_mpll: source is mpll (1), rate is 532000000

mmc_bus: source is mout_epll (0), rate is 24000000

usb-bus-host: source is clk_48m (0), rate is 48000000

uclk1: source is dout_mpll (1), rate is 66500000

spi-bus: source is mout_epll (0), rate is 24000000

audio-bus: source is mout_epll (0), rate is 24000000

irda-bus: source is mout_epll (0), rate is 24000000

camera: no parent clock specified

Kernel command line: root=/dev/mtdblock2 rootfstype=cramfs console=ttySAC0,115200

PID hash table entries: 1024 (order: 0, 4096 bytes)

Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Memory: 256MB = 256MB total

Memory: 206888k/206888k available, 55256k reserved, 0K highmem

Virtual kernel memory layout:

vector : 0xffff0000 - 0xffff1000 ( 4 kB)

fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)

DMA : 0xff600000 - 0xffe00000 ( 8 MB)

vmalloc : 0xd0800000 - 0xf4000000 ( 568 MB)

lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)

pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)

modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

.init : 0xc0008000 - 0xc0033000 ( 172 kB)

.text : 0xc0033000 - 0xc06f46bc (6918 kB)

.data : 0xc06f6000 - 0xc07367c8 ( 258 kB)

.bss : 0xc07367ec - 0xc07b4088 ( 503 kB)

SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

NR_IRQS:246 nr_irqs:246 246

VIC @f4000000: id 0x00041192, vendor 0x41

VIC @f4010000: id 0x00041192, vendor 0x41

Console: colour dummy device 80x30

console [ttySAC0] enabled

Calibrating delay loop... 528.79 BogoMIPS (lpj=2643968)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

hw perfevents: enabled with v6 PMU driver, 3 counters available

devtmpfs: initialized

NET: Registered protocol family 16

hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.

hw-breakpoint: maximum watchpoint size is 4 bytes.

s3c64xx_dma_init: Registering DMA channels

PL080: IRQ 73, at d0804000, channels 0..8

PL080: IRQ 74, at d0806000, channels 8..16

bio: create slab at 0

SCSI subsystem initialized

------------[ cut here ]------------

WARNING: at drivers/gpio/gpiolib.c:101 gpio_ensure_requested+0x58/0x124()

---[ end trace da227214a82491b7 ]---

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

s3c-i2c s3c2440-i2c.0: slave address 0x10

s3c-i2c s3c2440-i2c.0: bus frequency set to 64 KHz

s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter

Advanced Linux Sound Architecture Driver Version 1.0.24.

cfg80211: Calling CRDA to update world regulatory domain

NET: Registered protocol family 2

IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

TCP established hash table entries: 8192 (order: 4, 65536 bytes)

TCP bind hash table entries: 8192 (order: 3, 32768 bytes)

TCP: Hash tables configured (established 8192 bind 8192)

TCP reno registered

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

NET: Registered protocol family 1

RPC: Registered named UNIX socket transport module.

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

audit: initializing netlink socket (disabled)

type=2000 audit(0.270:1): initialized

msgmni has been set to 404

alg: No test for stdrng (krng)

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

io scheduler noop registered

io scheduler deadline registered

io scheduler cfq registered (default)

LCD TYPE :: LTE480WV will be initialized

Console: switching to colour frame buffer device 60x34

fb0: s3cfb frame buffer device

fb1: s3cfb frame buffer device

fb2: s3cfb frame buffer device

fb3: s3cfb frame buffer device

s3c6400-uart.0: ttySAC0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10

s3c6400-uart.1: ttySAC1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10

s3c6400-uart.2: ttySAC2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10

s3c6400-uart.3: ttySAC3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10

NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit)

Creating 4 MTD partitions on "NAND 2GiB 3,3V 8-bit":

0x000000000000-0x000000100000 : "Bootloader"

0x000000100000-0x000000600000 : "Kernel"

0x000000600000-0x000007e00000 : "User"

0x000007e00000-0x000080000000 : "File System"

vcan: Virtual CAN interface driver

slcan: serial line CAN interface driver

slcan: 10 dynamic interface channels.

CAN device driver interface

mcp251x: setup gpio pins CS and External Int

mcp2515 spi1.0: MCP251x didn't enter in conf mode after reset

mcp2515 spi1.0: Probe failed

mcp2515 spi1.0: probe failed

PPP generic driver version 2.4.2

PPP Deflate Compression module registered

PPP BSD Compression module registered

PPP MPPE Compression module registered

NET: Registered protocol family 24

dm9000 Ethernet Driver, V1.31

eth0: dm9000a at d081a000,d0c00004 IRQ 108 MAC: 08:90:00:a0:90:90 (platform data)

libertas_sdio: Libertas SDIO driver

libertas_sdio: Copyright Pierre Ossman

usbcore: registered new interface driver rt73usb

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

s3c2410-ohci s3c2410-ohci: S3C24XX OHCI

s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1

s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000

usb usb1: New USB device found, idVendor=1d6b, idProduct=0001

usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb1: Product: S3C24XX OHCI

usb usb1: Manufacturer: Linux 3.0.1-svn140 ohci_hcd

usb usb1: SerialNumber: s3c24xx

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

Initializing USB Mass Storage driver...

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

usbcore: registered new interface driver usbserial

usbserial: USB Serial Driver core

USB Serial support registered for pl2303

usbcore: registered new interface driver pl2303

pl2303: Prolific PL2303 USB to serial adaptor driver

dummy_hcd dummy_hcd: USB Host+Gadget Emulator, driver 02 May 2005

dummy_hcd dummy_hcd: Dummy host controller

dummy_hcd dummy_hcd: new USB bus registered, assigned bus number 2

usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb2: Product: Dummy host controller

usb usb2: Manufacturer: Linux 3.0.1-svn140 dummy_hcd

usb usb2: SerialNumber: dummy_hcd

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 1 port detected

mousedev: PS/2 mouse device common for all mice

input: gpio-keys as /devices/platform/gpio-keys/input/input0

input: s3c-keypad as /devices/virtual/input/input1

S3C Keypad Driver

S3C TouchScreen got loaded successfully : 12 bits

input: S3C TouchScreen as /devices/virtual/input/input2

s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0

i2c /dev entries driver

Linux video capture interface: v2.00

gspca: main v2.10.0 registered

usbcore: registered new interface driver benq

benq: registered

usbcore: registered new interface driver conex

conex: registered

usbcore: registered new interface driver cpia1

cpia1: registered

usbcore: registered new interface driver etoms

etoms: registered

usbcore: registered new interface driver finepix

finepix: registered

usbcore: registered new interface driver jeilinj

jeilinj: registered

usbcore: registered new interface driver mars

mars: registered

usbcore: registered new interface driver mr97310a

mr97310a: registered

usbcore: registered new interface driver ov519

ov519: registered

usbcore: registered new interface driver ov534

ov534: registered

usbcore: registered new interface driver ov534_9

ov534_9: registered

usbcore: registered new interface driver pac207

pac207: registered

usbcore: registered new interface driver pac7302

pac7302: registered

usbcore: registered new interface driver pac7311

pac7311: registered

usbcore: registered new interface driver sn9c2028

sn9c2028: registered

usbcore: registered new interface driver sn9c20x

sn9c20x: registered

usbcore: registered new interface driver sonixb

sonixb: registered

usbcore: registered new interface driver sonixj

sonixj: registered

usbcore: registered new interface driver spca500

spca500: registered

usbcore: registered new interface driver spca501

spca501: registered

usbcore: registered new interface driver spca505

spca505: registered

usbcore: registered new interface driver spca506

spca506: registered

usbcore: registered new interface driver spca508

spca508: registered

usbcore: registered new interface driver spca561

spca561: registered

usbcore: registered new interface driver spca1528

spca1528: registered

usbcore: registered new interface driver sq905

sq905: registered

usbcore: registered new interface driver sq905c

sq905c: registered

usbcore: registered new interface driver sq930x

sq930x: registered

usbcore: registered new interface driver sunplus

sunplus: registered

usbcore: registered new interface driver stk014

stk014: registered

usbcore: registered new interface driver stv0680

stv0680: registered

usbcore: registered new interface driver t613

t613: registered

usbcore: registered new interface driver tv8532

tv8532: registered

usbcore: registered new interface driver vc032x

vc032x: registered

usbcore: registered new interface driver zc3xx

zc3xx: registered

usbcore: registered new interface driver ALi m5602

ALi m5602: registered

usbcore: registered new interface driver STV06xx

STV06xx: registered

gspca_gl860: driver startup - version 0.9d10

usbcore: registered new interface driver gspca_gl860

gspca_gl860: driver registered

s3c-fimc: controller 0 registered successfully

s3c-fimc: controller 1 registered successfully

s3c-fimc: info ov965x_init

cym s3c_mfc_mememap: addr:5dff9000 size:1138688

s3c_rotator_probe called

s3c_g2d_probe called

s3c_g2d_probe Success

usbcore: registered new interface driver uvcvideo

USB Video Class driver (v0.1.0)

s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled

sdhci: Secure Digital Host Controller Interface driver

sdhci: Copyright(c) Pierre Ossman

s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)

s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz)

s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (24000000 Hz)

mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA

s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133000000 Hz)

s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133000000 Hz)

s3c-sdhci s3c-sdhci.1: clock source 2: mmc_bus (24000000 Hz)

mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

asoc: AC97 HiFi s3c-ac97 mapping ok

mmc0: new high speed SD card at address b368

mmcblk0: mmc0:b368 SD256 244 MiB

mmcblk0: p1

ALSA device list:

#0: SMDK (WM9713)

TCP cubic registered

NET: Registered protocol family 17

can: controller area network core (rev 20090105 abi 8)

NET: Registered protocol family 29

can: raw protocol (rev 20090105)

can: broadcast manager protocol (rev 20090105 t)

lib80211: common routines for IEEE802.11 drivers

Registering the dns_resolver key type

s3c-rtc s3c64xx-rtc: setting system clock to 2131-01-16 15:02:46 UTC (787048470)

VFS: Mounted root (cramfs filesystem) readonly on device 31:2.

devtmpfs: mounted

Freeing init memory: 172K

FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

hwclock: settimeofday() failed: Invalid argument

/etc/rc.d/init.d/netd: line 16: /usr/sbin/inetd: not found

mkdir: cannot create directory '/mnt/disk': File exists

yaffs: dev is 32505859 name is "mtdblock3" rw

yaffs: passed flags ""

Try to bring eth0 interface up......dm9000 dm9000.0: eth0: link down

Done

Starting Qtopia2, please waiting...

Please press Enter to activate this console. touch...

[root@FORLINX6410]#

史文林

关注

0
点赞
踩
0

收藏

觉得还不错? 一键收藏
0
评论
linux一键烧写,OK6410A学习笔记一：一键烧录Linux

去年5月份买的飞凌OK6410A开发板，但是一直没有怎么用，主要是自己懒，呵呵，都是废话开发环境：windows7 + vmware 6.5 + ubuntu 9.10烧录步骤:1)SD卡，格式化成FAT32格式，然后用SD_Write.exe将mmc.bin烧录进去。windows7下要在管理员模式下运行SD_Write.exe，烧录mmc.bin之前要点击Format2)把u-boot.bin...
复制链接

扫一扫