redhat 添加ssh端口_linux添加端口

Linux下在防火墙中开启80端口、3306端口的方法

vi /etc/sysconfig/iptables

-A INPUT -m state –state NEW -m tcp -p tcp –dport 80 -j ACCEPT(允许80端口通过防火墙)

-A INPUT -m state –state NEW -m tcp -p tcp –dport 3306 -j ACCEPT(允许3306端口通过防火墙)

特别提示：很多网友把这两条规则添加到防火墙配置的最后一行，导致防火墙启动失败，正确的应该是添加到默认的22端口这条规则的下面

添加好之后防火墙规则如下所示：

代码如下:

# Firewall configuration written by system-config-firewall

# Manual customization of this file is not recommended.

*filter

:INPUT ACCEPT [0:0]

:FORWARD ACCEPT [0:0]

:OUTPUT ACCEPT [0:0]

-A INPUT -m state –state ESTABLISHED,RELATED -j ACCEPT

-A INPUT -p icmp -j ACCEPT

-A INPUT -i lo -j ACCEPT

-A INPUT -m state –state NEW -m tcp -p tcp –dport 22 -j ACCEPT

-A INPUT -m state –state NEW -m tcp -p tcp –dport 80 -j ACCEPT

-A INPUT -m state –state NEW -m tcp -p tcp –dport 3306 -j ACCEPT

-A INPUT -j REJECT –reject-with icmp-host-prohibited

-A FORWARD -j REJECT –reject-with icmp-host-prohibited

COMMIT

然后重启一下防火墙

service iptables restart

搞定!

centos7不太一样

那怎么开启一个端口呢

添加

firewall-cmd --zone=public --add-port=8080/tcp --permanent    (--permanent永久生效，没有此参数重启后失效)

重新载入

firewall-cmd --reload

查看

firewall-cmd --query-port=8080/tcp

删除

firewall-cmd --zone= public --remove-port=80/tcp --permanent