问题:
FINAL UPDATE: 最终更新:
I had forgotten to run the initdb command. 我忘了运行initdb命令。
< /FINAL UPDATE> FINAL UPDATE>
by running this command 通过运行此命令
ps auxwww | grep postgres
I see that postgres is not running 我看到postgres没有运行
> ps auxwww | grep postgres
remcat 1789 0.0 0.0 2434892 480 s000 R+ 11:28PM 0:00.00 grep postgres
this raises the question: How do I start the postgresql server? 这引出了一个问题:如何启动postgresql服务器?
update: 更新:
>pg_ctl -D /usr/local/var/postgres -l /usr/local/var/postgres/server.log start
server starting
sh: /usr/local/var/postgres/server.log: No such file or directory
update 2: 更新2:
The touch was not successful so I did this instead: 触摸不成功所以我这样做了:
> mkdir /usr/local/var/postgres
> vi /usr/local/var/postgres/server.log
> ls /usr/local/var/postgres/
server.log
But when I try to start rails server, I still see this: 但是当我尝试启动rails服务器时,我仍然看到:
Is the server running on host "localhost" and accepting
TCP/IP connections on port 5432?
update 3: 更新3:
> pg_ctl -D /usr/local/var/postgres status
pg_ctl: no server running
update 4: 更新4:
I found that there WAS NO pg_hba.conf (only pg_hba.conf.sample) so I modified the sample and renamed it (to remover the .sample). 我发现没有pg_hba.conf(只有pg_hba.conf.sample)所以我修改了样本并将其重命名(以移除.sample)。 Here are the contents: 以下是内容:
# IPv4 local connections:
host all all 127.0.0.1/32 trust
# IPv6 local connections:
host all all ::1/128 trust
but I don't understand this: 但我不明白这个:
> pg_ctl -D /usr/local/var/postgres -l /usr/local/var/postgres/server.log start
server starting
> pg_ctl -D /usr/local/var/postgres status
pg_ctl: no server running
also: 也:
sudo find / -name postgresql.conf
find: /dev/fd/3: Not a directory
find: /dev/fd/4: Not a directory
update 5: 更新5:
sudo pg_ctl -D /usr/local/var/postgres -l /usr/local/var/postgres/server.log start
Password:
pg_ctl: cannot be run as root
Please log in (using, e.g., "su") as the (unprivileged) user that will own the server process.
update 6: 更新6:
this seems odd: 这看起来很奇怪:
> egrep 'listen|port' /usr/local/var/postgres/postgresql.conf
egrep: /usr/local/var/postgres/postgresql.conf: No such file or directory
though, I did do this: 不过,我这样做了:
>sudo find / -name "*postgresql.conf*"
find: /dev/fd/3: Not a directory
find: /dev/fd/4: Not a directory
/usr/local/Cellar/postgresql/9.0.4/share/postgresql/postgresql.conf.sample
/usr/share/postgresql/postgresql.conf.sample
so I did this: 所以我这样做了:
egrep 'listen|port' /usr/local/Cellar/postgresql/9.0.4/share/postgresql/postgresql.conf.sample
#listen_addresses = 'localhost' # what IP address(es) to listen on;
#port = 5432 # (change requires restart)
# supported by the operating system:
# %r = remote host and port
so I tried this: 所以我试过这个:
> cp /usr/local/Cellar/postgresql/9.0.4/share/postgresql/postgresql.conf.sample /usr/local/Cellar/postgresql/9.0.4/share/postgresql/postgresql.conf
> cp /usr/share/postgresql/postgresql.conf.sample /usr/share/postgresql/postgresql.conf
still getting the same "Is the server running?" 仍然是相同的“服务器正在运行吗?” message. 信息。
解决方案:参考一:
https://stackoom.com/question/XSo0/如何在Mac-OS-X上启动PostgreSQL服务器
参考二:
https://oldbug.net/q/XSo0/How-to-start-PostgreSQL-server-on-Mac-OS-X