arm_linux启动 built in shell,ARM Linux

最新推荐文章于 2024-04-10 18:31:37 发布

邬盛

最新推荐文章于 2024-04-10 18:31:37 发布

阅读量234

点赞数

文章标签： arm_linux启动 built in shell

U-Boot 1.1.4 (May 8 2006 - 15:33:27)

U-Boot code: 33F80000 -> 33F96D4C BSS: -> 33F9B038

RAM Configuration:

Bank #0: 30000000 64 MB

Flash: 16 MB

In: serial

Out: serial

Err: serial

Hit any key to stop autoboot: 0

## Booting image at 32000000 ...

Image Name:

Created: 2006-07-03 9:21:13 UTC

Image Type: ARM Linux Kernel Image (gzip compressed)

Data Size: 796603 Bytes = 777.9 kB

Load Address: 30008000

Entry Point: 30008000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Starting kernel ...

Linux version 2.4.18-rmk7-pxa1 () (gcc version 2.95.3

20010315 (release)) #468 Mon Jul 3 17:20:28 CST 2006

CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0

Machine: Samsung-SMDK2410

Warning: bad configuration page, trying to continue

On node 0 totalpages: 16384

zone(0): 16384 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: mem=64M console=ttyS0,115200 root=/dev/ram rw initrd=0x3080

0000,6000000 ramdisk_size=15360

Calibrating delay loop... 50.58 BogoMIPS

Memory: 64MB = 64MB total

Memory: 62508KB available (1593K code, 312K data, 56K init)

Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)

Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)

Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)

Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)

Page-cache hash table entries: 16384 (order: 4, 65536 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

CPU clock = 202.800000 Mhz, HCLK = 101.400000 Mhz, PCLK = 50.700000 Mhz

Initializing S3C2410 buffer pool for DMA workaround

S3C2410 USB Controller Core Initialized

usbctl: Opened for usb-char

usbctl: Started for usb-char

Starting kswapd

Journalled Block Device driver loaded

devfs: v1.10 (20020120) Richard Gooch ()

devfs: boot_options: 0x1

8563 init OK

ttyS%d0 at I/O 0x50000000 (irq = 52) is a S3C2410

ttyS%d1 at I/O 0x50004000 (irq = 55) is a S3C2410

ttyS%d2 at I/O 0x50008000 (irq = 58) is a S3C2410

pty: 256 Unix98 ptys configured

s3c2410-ts initialized

S3C2410 Real Time Clock Driver v0.1

Non-volatile memory driver v1.1

block: 128 slots per queue, batch=32

RAMDISK driver initialized: 16 RAM disks of 15360K size 1024 blocksize

Uniform Multi-Platform E-IDE driver Revision: 6.31

ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx

BANKCON2 is 0x700

set ide_CS0 0x10000000 -> ide_base0 0xc4810000, ide_CS1 0x10000010 -> ide_base1

0xc4820010

hda: no response (status = 0xa1), resetting drive

hda: no response (status = 0xa1)

hdb: no response (status = 0xa1), resetting drive

hdb: no response (status = 0xa1)

eth0: cs8900 rev K(3.3 Volts) found at 0xd0000300

cs89x0 media RJ-45, IRQ 37

loop: loaded (max 8 devices)

SCSI subsystem driver Revision: 1.00

request_module[scsi_hostadapter]: Root fs not mounted

begin init_physmap 0x1140000

physmap flash device: 4000000 at 8000000

CFI: Found no Physically mapped flash device at location zero

Search for id:(1006 e594) interleave(1) type(2)

Search for id:(90 e594) i

Search for id:(b004 ffff) interleave(1) type(2)

Search for id:(90 ff) interleave(2) type(1)

Search for id:(9090 9090) interleave(2) type(2)

JEDEC: Found no Physically mapped flash device at location zero

request_module[map_rom]: Root fs not mounted

s3c2410 flash device: 1600000 at 1000000

Search for id:(89 18) interleave(1) type(2)

Search for id:(89 18) interleave(2) type(1)

Search for id:(89 00) interleave(2) type(2)

JEDEC: Found no s3c2410 flash device device at location zero

Using buffer write method

Creating 4 MTD partitions on "s3c2410 flash device":

0x00000000-0x00040000 : "r

0x00040000-0x00140000 : "reserved for kernel"

0x00140000-0x00540000 : "reserved for ramdisk"

0x00800000-0x01000000 : "jffs2(8M)"

smc s3c2410 init start

NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)

Creating 5 MTD partitions on "Samsung K9D1208V0M":

0x00000000-0x00030000 : "boot"

0x00030000-0x00130000 : "kernel"

0x00130000-0x01530000 : "root"

0x01530000-0x02b30000 : "yaffs part0"

0x02b30000-0x04000000 : "yaffs part1"

smc s3c2410 init ok erasesize = 16384, oobblock = 512, oobsize = 16

mtdblock init start

mtdblock init finish

ftl_cs: FTL header not found.

usb.c: registered new driver hub

usb-ohci.c: USB OHCI at membase 0xe9000000, IRQ 26

usb.c: new USB bus registered, assigned bus number 1

hub.c: USB hub found

port #1 suspened!

port #0 alived!

hub.c: 1 port dete

Initializing USB Mass Storage driver...

usb.c: registered new driver usb-storage

USB Mass Storage support registered.

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 4096 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

RAMDISK: ext2 filesystem found at block 0

RAMDISK: Loading 4096 blocks [1 disk] into ram disk... done.

Freeing initrd memory: 5859K

EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended

VFS: Mounted root (ext2 filesystem).

Mounted devfs on /dev

Freeing init memory: 56K

==> 1

init started: BusyBox v1.00-pre2 (2004.01.05-08:38+0000) mult?call binary

Bummer, could not run '/etc/init.d/rcS': No such file or directo鷜

Please press Enter to activate this console.

BusyBox v1.00-pre2 (2004.01.05-08:38+0000) Built-in shell (ash)

Enter 'help' for a list of built-in commands.

邬盛

关注

0
点赞
踩
0

收藏

觉得还不错? 一键收藏
0
评论
arm_linux启动 built in shell,ARM Linux

U-Boot 1.1.4 (May 8 2006 - 15:33:27)U-Boot code: 33F80000 -> 33F96D4C BSS: -> 33F9B038RAM Configuration:Bank #0: 30000000 64 MBFlash: 16 MBIn: serialOut: serialErr: serialHit any key to...
复制链接

扫一扫